Evaluation version so that NIVLM works well

Similar Questions

• My desktop version of my site works well but the mobile and tablet versions have any overlap and the entire page. If I can't pin things that it stops?

  My desktop version of my site works well but the mobile and tablet versions have any overlap and the entire page. If I can't pin things that it stops?

  Hi Pedro,

  Make sure that when you design the phone and tablet version to keep in mind the limits of dimensions.

  Please share the url of your site for further analysis.

  Kind regards

  Akshay

• Hi, I'm rookiee and I just started with the first steps of creating a Web site. the katies-coffee-building file is on my desk and uplouded in the library. That has worked well. Now I'm putting the button in Photo Shop (banner), I have pull down on file/pl

  Message "Hi, I'm rookiee and I just started with the first steps of creating a Web site. the katies-coffee-building file is on my desk and uplouded in the library. That has worked well. Now, I'm putting the button in Photo Shop (banner) in. I pull down on the file Photo Shop button instead and try to select the Banner.psd file. Unfortunately all of the (active) folder is not accessible to all. One is not visibel. Please - need some help here. Thank you.

  @Ach ja, meine Muttersprache ist Deutsch

  You must use the file > Place Photoshop button (Cmd / Ctrl + B).

• What is the latest version of Safari for OX 10.8.5 I Safari 6.0.5 that it work well

  What is the latest version of Safari for OX 10.8.5 I Safari 6.0.5 and it does not work well, but I DO NOT update my OS for good reasons. When updated with the latest system all going nuts with the software. Apple always wants us to be updated, but it messes things and then we have all the new software. Is Safari 6.0.5 later that I can run with my 10.8.5 OX? My Firefox works very well and I prefer it to Google Chrome, but what other browsers could I use better than the Safai I if I can't get a later version of Safari? Thank YOU if you reply

  Safari 6.2.8. Open the Mac App Store, click the updates tab and install Safari or security updates that appear.

  (143364)

• my javascript or my site breaks in the latest version, Firefox 20 and works well with chrome and IE, what is the problem?

  Hi, my website can't load a lot of thing in firefox 20.
  My search ajax breaks, it does that for the first time you visit, and he disappeared for always after that.
  A lot of things happen. But its all works well in IE and Chrome. It's so embarrassing for me.
  You can visit my site at http://www.apasaja.biz

  There are warnings of CSP (content security policy) in the error log showing that Firefox is not load scripts.
  
  So, you will need to look into this.

  • x-content-security-policy: allow 'auto '. script-options inline; IM$

  CSP WARN:  allow directive is deprecated, use the equivalent default-source directive instead
  CSP WARN:  Couldn't process unknown directive 'im$'
  
  CSP WARN:  Directive default-src https://www.apasaja.biz:443 violated by https://ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.min.js
  CSP WARN:  Directive default-src https://www.apasaja.biz:443 violated by https://ajax.googleapis.com/ajax/libs/jqueryui/1.8.21/jquery-ui.min.js
  CSP WARN:  Directive default-src https://www.apasaja.biz:443 violated by https://secure.comodo.net/trustlogo/javascript/cot.js

  • https://developer.Mozilla.org/en-us/docs/security/CSP
  • https://developer.Mozilla.org/en-us/docs/security/CSP/Introducing_Content_Security_Policy
  • https://developer.Mozilla.org/en-us/docs/security/CSP/CSP_policy_directives

• Downloaded version en-US, program works well in German

  I downloaded the Version of FF 23.0-US, however everything in FF is in German but.

  I'm located in Germany and unfortunately have a German version of Windows 8 Pro.

  Change in the topic: config general.useragent.locale to en-US has not helped. What can I do?

  Thank you for your help,
  HJStern

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest desktop version of Firefox from https://www.mozilla.org/en-US/firefox/all/ and save the file to install it on your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• How to check is that DG works well?

  Hi all

  31%

  AIX

  We have dataguard configured on our prod primary and physical standby database.

  My boss ask me to create a script for the tech email group every day at 08:00 the status of replication (apply logs).

  Since I am on dataguard broker. I'll do the script as follows:

  ===========================

  Oracle@prodsvr:/Home/Oracle > dgmgrl

  DGMGRL for IBM/AIX RISC System/6000: Version 11.2.0.3.0 - 64 bit Production

  Copyright (c) 2000, 2009, Oracle. All rights reserved.

  Welcome to DGMGRL, type 'help' for more information.

  
  

  DGMGRL > Connect sys/Manager

  Connected.

  DGMGRL > see the configuration;

  Configuration - DGConfig1

  Protection mode: MaxPerformance

  Databases:

  PROD - primary

  PRODDR - physical of the standby database

  Fast-Start Failover: DISABLED

  The configuration status:

  SUCCESS

  DGMGRL > output

  =========================

  How to save the logs above or by e-mail? (I know how to send an email already) I just need the log file.

  Thank you

  MK

  Don't mean our expectation has no latency period?

  If apply lag is 0 seconds, then Yes!

  as in the update in real time?

  What is your definition as updated in real-time?

  Applies what real-time means it's that roll forward is applied as it is received.  The offset to be applied will not necessarily always be zero... depends on your mode of about.

  Protection of data protection modes

• Whenever when you open a JPG file I get this error: "Adobe Acrobat Reader DC no longer works", but that Acrobat works well. How can I get rid of this irritating popup?

  

  And when I try to contact the House (after login) I have to log in again and then my account is not recognized. It is said: Adobe ID and password do not match. Arghhhh!

  

  Hello

  For repair, there is no need to uninstall and re install. Just launch Acrobat > Navigate to Help > repair the Installation of Acrobat.

  Concerning

  Sukrit diallo

• Evaluation version: puzzled that copy, paste... grayed out

  Been trying experience with various functions such as using blending modes, the required (from my old Serif program) some copying and pasting.

  I'm confused why copy it, paste and other functions are greyed out.

  TBH it is probably just me, but ATM PSE8 seems not so easy to master.

  You have an active selection? I ask because you must have an active selection before the copy command is available. To select the entire layer, use selection

• In Firefox Mobile Android version 38 do not work a pageWorker! (cross-page-sdk)

  I'm developing an addon for android mobile version of Firefox and use the api high level ' sdk/page-worker' for my process.
  But when I updated Firefox to version 38, page/sdk-worker do not work.
  I try to use the source code of the page https://developer.mozilla.org/en-US/Add-ons/SDK/High-Level_APIs/page-worker , but it does not work too. I mean that without error, but the background page was not created.
  For example, if I'm using the following source code:

  var pageWorker = require("sdk/page-worker");
  var tmp = pageWorker.Page({)
  contentScript: "console.log ("Im loaded!");"
  });

  I have no errors or warnings and did not log console "Im loaded! It is only work on android mobile version of FIrefox 38. 37 mobile Firefox, it works well (and desktop version of 38 Firefox works well).

  This is a bug or a new feature? In the changelog for Firefox 38 nothing about this...

  Thank you! I await your response!

  This is a user support forum asking on https://groups.google.com/forum/#! forum/mozilla-labs-jetpack or filing a bug with the sdk of addons would be better https://bugzilla.mozilla.org/enter_bug.cgi?product=Add-on%20SDK

• TC and AE cable network works well, but some settings seem odd

  I was stumped by this for some time.  Despite the fact that everything works well, a setting on my TC seems inconsistent with what would be expected.  Here is a summary of my network:

  1 modem of the IAF was WIFI and DHCP active off the COAST, and it connects to the TC with ethernet.  The IP address is 192.168.1.1.

  2 TC reportedly made all DHCP and NAT functions and peripheral PSI is simply a relay for the incoming connection to broadband.  IP address is 192.168.1.2, ethernet and it is connected using static.

  3 AE network extends the network.  IP address is 192.168.1.3, ethernet, connected using static.

  4 Apple TV 4 does its thing.  192.168.1.4, ethernet static IP address.

  5. I have DHCP reservations for Beach 192.168.1.2 - 192.168.1.10 for these devices, as well as the rest - iMac and MacBook Pro, ethernet, static.

  6 DHCP set temperature 192.168.1.11 to 192.168.1.200 for mobile devices.

  The TC acts as the hub for all the rest and that is why he would hold DHCP and NAT functions, these are disabled on device of the ISP.  However, for my life, I can't not DHCP and NAT to work as router Mode.  DHCP is the only one that works.  I certainly do not have an IP given by the ISP, and there is nothing to indicate that it performs NAT functions.  If I try to change the DHCPand NAT router Mode, I get errors that there is a conflict and that the range is incorrect.  Conflicts of DHCP-range for the base station WAN address.

  DHCP not seems to work very well, but my question is which device running NAT if the TC disobeys.

  Any suggestions are appreciated.

  DHCP not seems to work very well, but my question is which device running NAT if the TC disobeys.

  NAT is handled by the device of the ISP that you call the 'modem'... but this is very probably a device modem/router or gateway... that despite what you think, does not as a simple modem.

  If it were, it must provide a public IP address of the time Capsule and instead provides a private IP address (192.168.1.2) of the time Capsule.

  A public IP address cannot start with 192.x, 172.x or 10.x

  When you have your modem/router configured properly as a simple modem... then... you will be able to configure the time Capsule as the main router to your network using the DHCP and NAT correct setting, without seeing errors like Double NAT or incompatible IP address range.

  Some modems/routers and gateways can be configured to operate as a simple modem, and some may not. If your modem/router provided by your ISP, you may need to check with them to see if the device can be configured to operate as a mode modem simple bridge, providing a public IP address unique to the time Capsule.

  Moreover, when the Capsule is configured as a router, the default IP address range that he uses is 10.0.1.x.  The Capsule will be 10.0.1.1 on the LAN and devices will be at 10.0.1.x.

• Preloader works well in Explorer 8. NEED HELP!

  Hello

  I'm just starting to use flash.

  I designed a site flash with Flash CS4 and Actionscript 3.0.

  I use this simple preloader, basically, I learned from a tutorial:

  Stop();

  Preloader
  loaderInfo.addEventListener (ProgressEvent.PROGRESS, updatePreloader);

  function updatePreloader(evtObj:ProgressEvent):void
  {
  container for the progress of the site (download)
  var p: Number = Math.floor((evtObj.bytesLoaded*100)/evtObj.bytesTotal);
  preloader_txt. Text = % + '% ';
  If (p == 100) {}
  nextFrame();
  
  }
  }

  Can someone please please help me to refresh correctly in explorer 8, such that it works well once, but if you refresh, it stops working and stays on 0%.

  All of this is the case, it is a number up to 100 percent, nothing complicated until I better learn Flash.

  If anyone can help.

  Thank you

  use:

  Stop();

  Preloader
  loaderInfo.addEventListener (ProgressEvent.PROGRESS, updatePreloader);

  {if(this.framesLoaded==This.totalFrames)}

  nextFrame();

  }

  function updatePreloader(evtObj:ProgressEvent):void
  {
  container for the progress of the site (download)
  var p: Number = Math.floor((evtObj.bytesLoaded*100)/evtObj.bytesTotal);
  preloader_txt. Text = % + '% ';
  If (p == 100) {}
  nextFrame();
   
  }
  }

• My OS is Vista 64 bit, it works well. Can I install a 32-bit version of Vista that can run alongside my existing 64 bit version.

  My OS is Vista 64 bit, it works well. I have a scanner that connects to the pc via a scsi card, the card I have will not work under a 32-bit version. I could buy a 64 bit version of the map, but it is an expensive exercise, I can install a 32-bit version of Vista that can run alongside my existing 64 bit version.

  Hi Paul,.

  No, you can not install the 32-bit version of Windows to the sides of the 64-bit version. However, you can have a configuration dual boot (32-bit on a partition and 64-bit on another). In this case you will need two licenses, a license being dedicated to a facility only.

  You might want to know

  32-bit and 64-bit Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

  If I am running a 64-bit version of Windows, I need 64-bit drivers for my devices?

  File system redirector

  http://msdn.Microsoft.com/en-us/library/aa384187 (vs.85) .aspx

• Have just been told by BT that I need a new/different version of Thunderbird to work with the new system BTMail (previously BTYahooMail) - I do?

  I have btinternet email for years and Thunderbird for too long and have been happy with both. Unfortunately, I'm not technical enough to understand the majority of assistance or instructions on the information pages of support technique/Thunderbird, but haven't managed to get TB put in place in the first place (long time) and it seems to have worked well since. However, on Friday both of my accounts to BT (sets of two numbers), so two BT email addresses have been moved new old BT Yahoo mail BT mail. I was unable to connect to one of them, but the other was very good - I have had help 'screen sharing' a technical chap BT to sort. However, he was able to Conect Thunderbird with email servers. I said to BT and the chap tech tried to sort on screen sharing, but could not (and I have been unable to follow what he was doing). A few months ago, I made a few changes, as requested by BT, to allow for the transfer to go smoothly (!), but the man has changed some things Friday, I think, as well. He could not solve the problem of TB and I can't figure it out at all, and the Lady of BT Tech help to whom I spoke this morning (and who had managed to fix my problem of connection BTID, fortunately) had a look and suggested that maybe I needed an update/new/different version TB or 'another email address. Well, I really want to stay with Thunderbird and was hoping that someone here could explain it in simple English for me, please? I was wondering what will happen, assuming that I need to download an updated version / different, if I did this and then sort of re-installed my existing BT email addresses (as if I started again with Thunderbird)? I hope that there is someone here who can help you - thank you - I'm rather fond of this little blue bird. Thank you.

  Hi, Zenos, thank you so much for your help - I have now (touch wood) have my email back after following your instructions. If all goes well, it will remain in operation during my upgrade to infinity next week.
  Thank you for taking the time to answer my question a little disjointed.
  Had never heard of before critical path, I thought that BTMail was BT Oh, well, as long as it works I guess (I hope it's better than the Yahoo system).
  Thanks again.

• When I first installed the new 5.1 icloud, OUTLOOK 2016 worked well. Updated windows 10 and know icloud will not work. ICloud show that it works.

  When I first installed the new 5.1 icloud, OUTLOOK 2016 worked well. Updated windows 10 and know icloud will not work. ICloud show that it works. Have reinstalled icloud a lot of time and know that the add-in does not show up in OUTLOOK.  Help

  I was pulling my hair re the incompatibility of iCloud and Outlook of Office 365 2016.  I finally got things to work on three of my computers - which are on the latest version of Windows 10.

  The steps that worked for me:

  (1) uninstall the plugin iCloud (what version you have); the uninstall may fail but if so don't worry as step 3 below overlays some iCloud plugin version you have installed

  (2) open the Control Panel, uninstall, change/repair Office 365; Select fast repair

  (3) reinstall iCloud plugin (version 5.1), then restart the system by following the instructions

  (4) after the reboot, plug in iCloud application Apple ID and password; Make sure that you enter your apple with the suffix icloud.com ID (e.g., [email protected])

  (5) check the iCloud options to your will (e.g., photo synch, synchronization of bookmarks, sync mail/calendar, etc.)

  (6) check apply it, leave the work plugin iCloud for a minute, when he finishes, check the closing

  (7) open Outlook 2016 and check your calendar or contacts or anything that you indicated in step 5, that you want to synchronize with iCloud.com

  I hope it works for you!