Eve stopped recovery

Similar Questions

• HP Envy 700 - xt desktop: How can I stop recovery of training hard and switch to disk system?

  Called Costco to get assistance from the technology with a desktop computer HP Envy. The tech asked me to do a system of hard drive recovery, even if I got recovery discs...

  The computer screen showed 100% software installation of recovery in less than two hours and the machine came into fashion "deactivate the tower."

  Problem: 'Disable lap' mode is still ongoing, and now it has been a full 6 hours and then some.

  Question #1: Can the office be manually stop to stop the process without end 'disable on tour' without harming the computer?

  Question #2: Guidance concerning such a judgment and then redo the system recovery once more, but this time with the recovery discs?

  Theoretically, the hard drive by using Recovery Manager F11 recovery should produce the same results as the set of recovery disks.  The set of recovery disks will probably replace all and then give the factory settings.  The result should be the same, however, I don't see no harm to do so.  What did you do to try to get out if "turn on, turn off"?

  On the thing to try before using the drive set - unplug the PC from the wall.  Press the power button, that would be turning on the PC if connected.  Hold button power in 30 seconds to a minute.  And then reconnect the power cord to back in and try to feed normally upward.

• Email stopped recovery

  My system stopped e-mail retiureving on my secondary email account. I get this message

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: "pop.west.cox.net (1)', server: 'pop.west.cox.net', Protocol: POP3, Port: 110, secure (SSL): no, error number: 0x800CCC0F

  tried to delete and check SSL required and checked and removed Secure required newspaper. But nothing helped.

  Philippe

  You are the very welcome. If you have problems in the future, try these recommended settings Cox.
   

• Eve stop applying the archivelogs

  Hello
  
  yesterday, in order to purgering flashback logs (it occupy much space FRA) in standby mode, I am a past "restore point" waiting for database and journal of a return of flame 'rm - r' (because not very sure, then rm only back log).
  
  That's what I did
  
  CC:
  To remove the eternal Flashback Logs, you must do the following:
  (1) file restore Points guaranteed that you don't need (e.g. drop restore point = > done in standby mode)
  (2) set the init DB_FLASHBACK_RETENTION_TARGET adequately = > done in standby mode
  (3) log as root and run the following statements:
  ls - lrt .../flashback|tail - 100 = > only "rm" a flashback, log (asm)
  prepare the delete statement for each file that you want to remove
  (rm - f)
  
  then this morning, I found last applied log is stuck yesterday afternoon. the stanby database does not apply archivelogs.
  SYS > change recover managed standby database disconnect log file using current;
  change recover managed standby database using current log file is disconnected
  *
  ERROR on line 1:
  ORA-01153: an incompatible media recovery is active
  
  
  Any idea to solve this problem?
  
  Thank you

  Hello again;

  I'm not an abandonment of the judgment.

  You want to avoid that because Oracle can bark loud and you could make your problem worse.

  Check the last 100 lines of your alert standby of warnings and error log and display the results.

  Best regards

  mseberg

• Problem of eve - of sequence numbers

  Hello world! I'm on 10.2.0.3.
  
  My physical Eve stopped applying newspapers because all of a sudden, the newspapers are out of sequence. See the errors below - after seq 7975 & 7976 seq # 7974 showed once again:
  
  Online Redo Log recovery: thread 1 mem group 200 Seq 7974 reading 0
  Mem # 0: /db/data3/FSPRD/stby_redo02.log
  MEM # 1: /db/data4/FSPRD/stby_redo02_02.log
  Game 18 dec 16:14:58 2008
  RFS [23]: Eve successfully opened log 100: ' / db/data1/FSPRD/stby_redo01.log'
  Game 18 dec 16:15:01 2008
  RFS [25]: open successfully the journal watch 300: ' / db/data5/FSPRD/stby_redo03.log'
  Game 18 dec 16:15:01 2008
  Primary database is in MAXIMUM PERFORMANCE mode
  RFS [37]: open successfully the journal ensures 400: ' / db/data7/FSPRD/stby_redo04.log'
  Game 18 dec 16:15:02 2008
  RFS [24]: open successfully the journal watch 200: ' / db/data3/FSPRD/stby_redo02.log'
  Game 18 dec 16:15:03 2008
  Media, recovery waiting for thread 1 sequence 7975 (in transit)
  Game 18 dec 16:15:03 2008
  Online Redo Log recovery: thread 1 mem group 100 Seq 7975 reading 0
  Mem # 0: /db/data1/FSPRD/stby_redo01.log
  MEM # 1: /db/data2/FSPRD/stby_redo01_02.log
  Media, recovery waiting for thread 1 sequence 7976 (in transit)
  Game 18 dec 16:15:07 2008
  Online Redo Log recovery: thread 1 mem group 200 Seq 7974 reading 0
  Mem # 0: /db/data3/FSPRD/stby_redo02.log
  MEM # 1: /db/data4/FSPRD/stby_redo02_02.log
  MRP0: Background Media Recovery terminated with error 355
  Game 18 dec 16:15:12 2008
  Errors in the /db/dbdump/FSPRD/bdump/fsprd_mrp0_11351.trc file:
  ORA-00355: change the numbers in the wrong order
  ORA-00353: journal corruption near Block 2 change 4994299896 time 18/12/2008 16:14:57
  ORA-00312: wire of 1 200 online newspaper: ' / db/data4/FSPRD/stby_redo02_02.log'
  ORA-00312: wire of 1 200 online newspaper: ' / db/data3/FSPRD/stby_redo02.log'
  Managed Standby recovery not using real time applies
  Game 18 dec 16:15:12 2008
  Primary database is in MAXIMUM PERFORMANCE mode
  RFS [37]: Eve successfully opened log 100: ' / db/data1/FSPRD/stby_redo01.log'
  Game 18 dec 16:15:13 2008
  Recovery interrupted!
  Game 18 dec 16:15:13 2008
  Errors in the /db/dbdump/FSPRD/bdump/fsprd_mrp0_11351.trc file:
  ORA-00355: change the numbers in the wrong order
  ORA-00353: journal corruption near Block 2 change 4994299896 time 18/12/2008 16:14:57
  ORA-00312: wire of 1 200 online newspaper: ' / db/data4/FSPRD/stby_redo02_02.log'
  ORA-00312: wire of 1 200 online newspaper: ' / db/data3/FSPRD/stby_redo02.log'
  Game 18 dec 16:15:13 2008
  MRP0: Stopping the process background Media Recovery (FSPRD)
  Game 18 dec 16:15:19 2008
  
  Of course I rebooted managed recovery and everything went well from this time - but I could not find the cause of this problem.
  
  Anyone has any ideas - or have experienced this before?
  
  TIA.

  I'm afraid you tap bug 6039415 ORA-355 can occur during the real time applies, the good news: there is a patch.

  HTH

  Enrique

• problems starting database recovery...

  HP - UX 11.23
  Oracle 10.2.0.2
  I know that this has been discussed a bit. I spent a number of hours on this forum only today just read through the success of the research. I tried some of the "tricks" that have been described in the nets. But I still get the same error...
  
  
  My standby database lost connectivity to my receivers logs primary and arrested. I have not received any notification, because my scripts not implemented to capture this event...
  On my primary retention policy is 30 days of archive logs. After that, they are deleted. (I don't agree with it, but not my call)
  The waiting got more than 30 days out of sync, so I decided to just refresh the day before all.
  
  Cold backup is not an option, I did an alter system checkpoint to empty all archive logs. Then, I published a full hot backup.
  Once completed, I advanced and created a control file fresh intelligence, in addition to a fresh backup control file. In this exact order.
  
  I have transferred all the archive logs and control files db more waiting.
  
  I ran the commands:
  startup nomount;
  (SUCCESSFULLY)
  ALTER database base_de_donnees eve of Mount;
  (SUCCESSFULLY)
  recover the database pending;
  I have run all the files in the archives until newspapers she file errored saying that he could not find 'X' being the next sequence that was not in the directory. To my knowledge, is normal... time to stop recovery.
  
  When I went to cancel, I get the following error.
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  ORA-00279: change 7313561157126 September at 2008-12-17 19:01:02 to
  thread 1
  ORA-00289: suggestion: /oraarch/swesc/1_13729_640853326.arc
  ORA-00280: change 7313561157126 thread 1 is in sequence #13729
  ORA-00278: log file ' / oraarch/swesc/1_13728_640853326.arc' is no longer necessary for
  This recovery
  
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  Cancel
  ORA-01547: WARNING: RECOVER succeeded but OPEN RESETLOGS would get below error
  ORA-01152: 1 no file has been restored from a sufficiently old backup
  ORA-01110: data file 1: ' / ora1/oradata/peregrine/system01.dbf'
  
  Therefore, my understanding of what it means that you should always apply the logs.
  So I grabbed the newspapers who had been self created during the time I have it all rebuilding and applied.
  Same mistakes.
  
  I am at a loss here. How can he still be out of sync? Is it possible to force it to a specific sequence so that I can open successfully, and then close it up to complete the sequence?
  
  Thank you.

  You have a few missing logs to make your atndby consistent database, apply more redo (which may be a primary database redo log files).

  as you approach ORA-01152: 1 file was not restored from a sufficiently old backup is due to that you just applied it again archivelog files but don't do it again that is in the file primary journal again. That's what I was suggesting you im my last post which put your database in automatic or manual recovery mode after you have performed a primary database switch journal in order to obtain recovery located at the primary database redo log file.

  Khurram

• DB pending will not mount successfully after you create primary

  I created a database eve of primaries, but now my my standby DB, although was mounted at the origin is no longer will rise when I published a stop & start
  
  
  That was the case until I restarted the day before
  
  ASSETS
  
  SQL > SELECT INSTANCE_NAME, DATABASE_STATUS, INSTANCE_ROLE from v$ instance;
  
  INSTANCE_NAME DATABASE_STATUS INSTANCE_ROLE
  ---------------- ----------------- ------------------
  APM1 PRIMARY_INSTANCE ACTIVE
  
  SQL > select CONTROLFILE_TYPE from database v$.
  
  CONTROL
  -------
  CURRENT
  
  
  STANDBY
  
  SQL > SELECT INSTANCE_NAME, DATABASE_STATUS, INSTANCE_ROLE from v$ instance;
  
  INSTANCE_NAME DATABASE_STATUS INSTANCE_ROLE
  ---------------- ----------------- ------------------
  PRIMARY_INSTANCE ACTIVE apm1
  
  SQL > select CONTROLFILE_TYPE from database v$.
  
  CONTROL
  -------
  STANDBY
  
  
  How can I check "this primary database carries redo logs to the standby database."
  
  Elementary school:
  SQL > select count (*) from v$ archived_log;
  
  COUNT (*)
  ----------
  527
  
  Standby:
  SQL > select count (*) from v$ archived_log;
  
  COUNT (*)
  ----------
  13
  
  
  If I don't change system switch logfile on primary, increases in County of v$ archived_log by 1 in the standby mode. SO it seems that my recovery logs get transported ok when I force him.
  
  How can I solve the problem below, please help - still a few steps to be taken would be appreciated in order to exclude the obvious questions!
  
  Completely baffled to record below
  
  Thanks in advance
  
  
  Journal Alerts in mode ensures:
  RFS [3]: assigned to the RFS 7052 process
  RFS [3]: identified the type of database such as 'physical' standby: customer is ARCH pid 23243
  Game Sep 09 07:48:13 2010
  Eve crash recovery need to archive the journal for thread 2 sequence 89 continue.
  Please check that this primary database carries logs of the database pending recovery.
  Wait timeout: thread 2 sequence 89
  Crash Eve aborted due to the 16016 error recovery.
  Errors in the /opt/app/oracle/diag/rdbms/apm/apm1/trace/apm1_ora_6611.trc file:
  ORA-16016: Archives journal for thread 2 sequence # 89 unavailable
  Recovery interrupted!
  Finished the day before crash recovery.
  Signalling error 1152 for datafile 1!
  Interrupt recovery for domain 0
  Errors in the /opt/app/oracle/diag/rdbms/apm/apm1/trace/apm1_ora_6611.trc file:
  ORA-10458: standby database requires recovery
  ORA-01152: 1 no file has been restored from a sufficiently old backup
  ORA-01110: data file 1: '+ DATA/apm/datafile/system.462.729240795 '.
  ORA-10458 marked during: ALTER DATABASE OPEN...

  also don't forget to check that fal_client and fal_server settings are correct and the recovery managed after the mount 'starting' kickoff

  SQL > recover managed disconnect from the database pending;

• SOAP Web service only works if the binding variable included in the object view

  
  

  JDeveloper version - 11.1.1.7.0

  
  

  I did this video Building WS to an existing of ADF - Insider ADF application for the integration of web services SOAP at my request. It worked fine until I added a variable binding to the my view object (after which she stopped recovery of values). I tried checking the log by modifying the FINEST logging level as proposed for ADF BC Logging none of the mistakes. Please help me on changes to make it work.

  Answered by thread

  ERROR when using ViewCriteria in search of Service BC ADF

• Files without a NAME during the Flashback Database

  Hi all

  Why, in flashback, database, retrieve a tablespace has dropped the datafile (s) consisting of within table get renamed to UNNAMEDnnn? I was going through some examples on the internet but did not find any concrete reason as to why this happens during the flashback recovery. If the tablespace can be recreated during the process, why not data files that compose?

  Could someone help me please in my understanding.

  Thank you.

  Prithwish Adhikari wrote:

  Hello

  I was talking about the flashback database to retrieve a tablespace has fallen. Please find below the link

  http://www.DBA-Oracle.com/t_rman_159_restore_dropped_tablespace.htm

  My question is

  "

  flashback

  database to the SNA 460217.

  database of flashback to the SNA 460217

  *

  ERROR on line 1:

  ORA-38795: WARNING: flashback has managed but open resetlogs would get error

  below

  ORA-01245: offline file 5 will be lost if resetlogs is done

  ORA-01111: name for the data file 5 is unknown - rename it to the correct file

  ORA-01110: data file 5: ' / u01/oracle/product/10.2.0/db_1/dbs/UNNAMED00005'

  "

  Why, in flashback, database, the data file associated with the storage space gets renamed to unnamed?

  Thanks for the link and new info.

  The reason is the same as in these quotes from doc that I have provided. As ORA-01111 indicates the name of the actual file is unknown so Oracle creates a unique name, then stops recovery so that you can provide the name and location.

  Why, during the flashback database, retrieve a tablespace has fallen...

  This formulation and the wording of the article, is probably what is mislead you. You cannot recover a tablespace using FLASHBACK DATABASE:

  Here is the doc for FLASHBACK DATABASE

  http://docs.Oracle.com/CD/B28359_01/backup.111/b28273/rcmsynta023.htm

  Notes A Flashback Database use operation applies to the entire base. You cannot flash back, individual storage spaces. A Flashback Database operation is similar to a point-in-time data recovery (DBPITR) with RECOVER , but RMAN uses flashback logs to undo changes to a point before the time runs out or SNA

  See that second sentence? You NEED to recover the entire database and, as this quote from doc says, made it like CAMILLE by RECOVER.

  In this example, the storage space AND data files were dropped. So please check the doc to DROP TABLESPACE

  https://docs.Oracle.com/CD/B28359_01/server.111/b28286/statements_9004.htm

  Oracle database deletes all metadata about the space of storage data files and all the data dictionary tempfiles in the tablespace. The database also automatically removes the operating system all data files managed by Oracle and tempfiles in the tablespace. Other data files and tempfiles are not removed from the operating system unless you specify INCLUDING CONTENTS AND DATAFILES .

  See? No additional data in the dictionary for the tablespace or data files. Real datafiles is more if they were managed by Oracle. But there MAY be data files of the operating system if you do NOT use this last clause.

  If Oracle recreates the files using unique names and then allows you to CONFIRM that the name and location should really be.

  You have a problem with that? Or just try to understand?

• Standby missing log file error

  Hi all

  I get this error in the alertlog queue.

  ORA-00313: open failed for the newspaper wire 8 2 group members

  ORA-00312: newspaper online, 8 2 thread: "+ DG_FLASH/hsstl/onlinelog/group_8.273.779638759".

  ORA-17503: ksfdopn:2 could not open the file +DG_FLASH/hsstl/onlinelog/group_8.273.779638759

  ORA-15012: ASM '+ DG_FLASH/hsipstl/onlinelog/group_8.273.779638759' file does not exist

  ORA-00312: newspaper online, 8 2 thread: "+ DG_DATA/hsstl/onlinelog/group_8.1766.779638759".

  ORA-17503: ksfdopn:2 could not open the file +DG_DATA/hsstl/onlinelog/group_8.1766.779638759

  ORA-15012: ASM '+ DG_DATA/hsipstl/onlinelog/group_8.1766.779638759' file does not exist

  When I manually check the diskgroup ' + DG_FLASH, + DG_DATA, I can see the file group_8 with a few other numbers.

  Kindly let me know how to do this. Oracle 11 g database, standalone standby database in the aix box

  My guess is the control file is always in mind that the Group of 8 file is present and looking for him at the start of the day before, but actually this file is not there in the diskgroup. Instead, some other file is there for the same group.

  I want to update the control file on the Group of new journal 8, or drop the newspaper group 8, delete logs of Group 8 of the disgroups + DG_FLASH, + DG_DATA and create a new group of newspaper 8

  Please suggest

  Kind regards

  Hello;

  Yes, you need to move a copy of the file password to all nodes. All nodes must use the same password file.

  Then stop recovery and stop so everything starts using your moved password file.

  Then restart the recovery.

  Best regards

  mseberg

• How to resize the log files pending? or it is synchronized from primary?

  I changed the size of the log file primary db to 50 m to 200 m.
  
  I wonder if I should do it on the backup site?
  
  I tried, and it doesn't seem to work on the backup site:
  
  SQL > select group # thread #, status, bytes/1024/1024 of the journal of v$.
  
  GROUP # THREAD # STATUS BYTES/1024/1024
  ---------- ---------- ---------------- ---------------
  1 1 50 COMPENSATION
  2 1 50 COMPENSATION
  3 2 COMPENSATION 50
  4 2 50 CURRENT
  5 1 COMPENSATION 50
  6 2 COMPENSATION 50
  15 1 200 UNUSED
  16 1 200 UNUSED
  17 2 200 UNUSED
  18 2 200 UNUSED
  
  10 selected lines.
  
  SQL > alter database drop logfile Group 1;
  change the database drop 1 log file group
  *
  ERROR on line 1:
  ORA-01624: log 1 necessary for instance REMEPRDS1 (1 wire) crash recovery
  ORA-00312: thread 1 1 online journal:
  "+ DAT/prds/onlinelog/group_1.961.793523169".
  ORA-00312: thread 1 1 online journal:
  "+ FRA/prds/onlinelog/group_1.5605.793523169".
  
  
  SQL > alter system switch logfile;
  alter system switch logfile
  *
  ERROR on line 1:
  ORA-16000: database opened for read-only access
  
  
  SQL > alter system switch logfile;
  alter system switch logfile
  *
  ERROR on line 1:
  ORA-16000: database opened for read-only access
  
  
  SQL > /.
  alter system switch logfile
  *
  ERROR on line 1:
  ORA-16000: database opened for read-only access
  
  
  SQL > alter database drop logfile Group 1;
  change the database drop 1 log file group
  *
  ERROR on line 1:
  ORA-01624: log 1 necessary for instance PRDS1 (1 wire) crash recovery
  ORA-00312: thread 1 1 online journal:
  "+ DAT/prds/onlinelog/group_1.961.793523169".
  ORA-00312: thread 1 1 online journal:
  "+ FRA/prds/onlinelog/group_1.5605.793523169".
  
  
  SQL >
  
  Please help me out here.
  
  Thank you

  Hello

  Even if you add standby or online redo log files or even if you resize down and re-create redo log files, they will not be created on the standby database. It is instance specific.

  Let all the restore, the MRP will cancel out.
  And then let fall, add standby redo log files, I think that you need to the MANUAL upgrade standby_file_management before adding new files of newspapers waiting for redo. And do not forget to undo file management the AUTO value again after the execution of the changes.

  And you train to make the journal command pending, it applies only on the primaries because the log command can only be performed on the database that uses online redo log files. Even if you open databases Eve with recovery that no recovery will be generated as a result no switch journal is allowed too.

• Test for oracle RAC workload. Ideas?

  Hello world
  
  I'm looking for somethnig who test the database with big load
  Any ideas how to achieve this. I would like to give my customers something
  They can count it.
  
  Thanks in advance.
  
  
  Best regards
  Mohd

  Hi Mohd,

  I always use Swingbench.
  Swingbench is a test of generator (benchmarks) designed to highlight the load free Oracle (9i, 10 g, 11 g) data.
  SwingBench consists of a load generator, a coordinator and an overview of the cluster. The software allows a charge to be generated and transactions/response times to be traced.
  Swingbench can be used to demonstrate and test technologies such as Real Application Clusters, rebuilt table online, Eve, backup recovery etc. and online databases.

  http://www.dominicgiles.com/swingbench.html

  Kind regards
  Levi Pereira

• SQL logging for Transport to another network

  Problem: We have an oracle database which receives all transactions from an application of BMC repair on the same network. We need to capture/transaction log, place them in the order in a flat file of some sort, transfer them to another network, and then apply them to the db replica in sequential order.
  
  I went through the docs of LogMiner and other things, but I don't really see a solution. Data Guard will not help, because we can not maintain a connection to transport of newspapers of the previous day.
  
  Our environment is Oracle 11 g R1.
  
  Any suggestions would be much apprecieted.
  
  Thank you
  Justin B.

  Taking a backup and sneakernetting that the destination network must only be done once during initial Setup. After that, you can just Sandalenet the archived log files, put Eve into recovery mode and what is it worth of newspapers. Any solution will be a first step, which is to restore some sort of backup as the starting point.

  DCC requires a Subscriber, but should not be a different database. This is why I suggested it would be a separate program that you have written that agrees with the changes and wrote a flat file (XML or otherwise). You will then need an additional program on the destination network that could read your custom XML file and generate DML appropriate after you Sandalenet the XML file. Sneakernetting an XML file is likely to be more difficult than logs archived simply sneakernetting because XML will be much larger files. Therefore, you must also write a maintain the programs that read and write the XML. I'm hard-pressed to see how this would be the 'best' way for any reasonable definition of "best".

  Justin

• Stopping the process background Media Recovery, need to resolve the issue

  Hello
  
  Nice day!
  
  O/S: HP - UX 11.31
  DB: 10.2.0.5
  
  primary database: 2xnode RAC/ASM
  database Watch: Single Instance / Unix file system
  
  Problem
  ======
  due to not having enough file system free space on the database pending node the name extension (primary database insider) Undo tablespace data file failed on the eve of the database and stop MRP.
  
  primary 2xnode RAC/ASM works well, as there is sufficient free space available in ASM - DG, but on the eve of the database MRP could not operate as cancel datafile could not be postponed because of not enough free space on the file system.
  
  
  Alert - content:
  
  ORA-01237: impossible to extend datafile 7
  ORA-01110: data file 7: ' / oracle/folder/undotbs2_01.dbf'
  ORA-19502: write error on file ' / oracle/folder/undotbs2_01.dbf ', blockno 102713 (blocksize = 8192)
  ORA-27072: IO file error
  HP-UX-ia64 Error: 11: Resource temporarily unavailable
  Additional information: 4
  Additional information: 102713
  Additional information: 456704
  Sun Aug 07 11:27:58 PST 2011
  Some of the files recovered data maybe left media fuzzy
  Media recovery can continue but open resetlogs may fail
  Sun Aug 07 11:27:58 PST 2011
  Errors in the /xxxx/bsspindb_mrp0_11342.trc file:
  ORA-01237: impossible to extend datafile 7
  ORA-01110: data file 7: ' / oracle/folder/undotbs2_01.dbf'
  ORA-19502: write error on file ' / oracle/folder/undotbs2_01.dbf ', blockno 102713 (blocksize = 8192)
  ORA-27072: IO file error
  HP-UX-ia64 Error: 11: Resource temporarily unavailable
  Additional information: 4
  Additional information: 102713
  Additional information: 456704
  Sun Aug 07 11:27:58 PST 2011
  MRP0: Stopping the process background Media Recovery (bsspindb)
  
  
  contents of the trace file:
  =============
  
  2011-08-07 11:27:32.542
  2011-08-07 11:27:32.542 64896 kcrr.c
  
  MRP0: Background Media Recovery terminated with error 1237
  ORA-01237: impossible to extend datafile 7
  ORA-01110: data file 7: ' / oracle/folder/undotbs2_01.dbf'
  ORA-19502: write error on file ' / oracle/folder/undotbs2_01.dbf ', blockno 102713 (blocksize = 8192)
  ORA-27072: IO file error
  HP-UX-ia64 Error: 11: Resource temporarily unavailable
  Additional information: 4
  Additional information: 102713
  Additional information: 456704
  -Redo read statistics for thread - 2
  Read rate (SYNC): 2651607 KB in 18054.67 s = > 0.14 Mb / s
  Physical reads total: 2651607Kb
  Longer: 14 Ko moves: 0/9426662 (0%)
  Change the movements: 1382412/14790845 (9%), moved: 503 MB
  More long LWN: 1081 KB, moves: 204/935910 (0%), moved: 5 MB
  Redo last scn: 0x0807.6e5e2a25 (8828009458213)
  ----------------------------------------------
  2011-08-07 11:27:32.557
  Fall of Media Recovery redo thread 2
  -Redo read statistics for thread - 1
  Read rate (SYNC): 2696445 KB in 18836.08 s = > 0.14 Mb / s
  Physical reads total: 2696445Kb
  Longer: 64 k, moves: 0/7997789 (0%)
  Change the movements: 1622690/11754876 (13%), moved: 701Mb
  More long LWN: 1974 KB moves: 237/591888 (0%), moved: 22 MB
  Redo last scn: 0x0807.6e5e2a03 (8828009458179)
  ----------------------------------------------
  2011-08-07 11:27:32.557
  Fall of Media Recovery redo thread 1
  2011-08-07 11:27:58.586
  The recovery is currently fatal!
  2011-08-07 11:27:58.586 1170 krsm.c
  Managed recovery: no Active posted.
  ORA-01237: impossible to extend datafile 7
  ORA-01110: data file 7: ' / oracle/folder/undotbs2_01.dbf'
  ORA-19502: write error on file ' / oracle/folder/undotbs2_01.dbf ', blockno 102713 (blocksize = 8192)
  ORA-27072: IO file error
  HP-UX-ia64 Error: 11: Resource temporarily unavailable
  Additional information: 4
  Additional information: 102713
  Additional information: 456704
  2011-08-07 11:27:58.590 64896 kcrr.c
  MRP0: Stopping the process background Media Recovery
  2011-08-07 11:27:58.590 1170 krsm.c
  ++++++++++++++++++++++++++++++++++
  
  
  No idea how fix the problem and restart the MRP process.
  
  Thank you...
  
  Kind regards
  X

  Hello

  You must add the disk to the /oracle file system. It seems that there is not enough space to extend the data file.
  After the addition of disc, you can restart the recovery with:
  ALTER DATABASE RECOVER MANAGED STANDBY BASE DISCONNECT FROM THE SESSION.

  or

  You can move your data undotbs2_01.dbf file to another file system that has enough space, that
  ALTER system set standby_file_management = manual scope = mΘmoire;
  change the database file rename ' / oracle/folder/undotbs2_01.dbf' to ' / new_fs/undotbs2_01.dbf ';
  ALTER system set standby_file_management = auto scope is mΘmoire;.

  then start the recovery.

  concerning

• Recovery MAnager does not - stops at Midway

  Hello

  
  

  I'm trying to restore my HP Pavaillion to the factory setting. I insert the disc of recovery manager supplied with the computer. However, he never goes from 44 percent complete. On the contrary a read error '1005 error if the problem persists, contact HP support' is displayed. (See attatched photo). How can I fix it?

  Additional information:

  The reason why I'm trying to restore my PC to factory settings, it is that is no longer able to boot. For some time I could start through the Windows 7 disc, but now I can't do same.

  Additional information:

  If it is possible to fix my computer without restoring to factory settings, that would be great I have a certain number of files it contains. The computer stopped booting all around the period I, 1) update Norton 360 and 2) installed Tablet Intuos Wacom. Notron 360 caused earlier problems with my PC (Blue Screen of Death by updating Norton 360) but I don't know if it's the cause again now. This could be the Tablet, as I played around with the settings (specifically, I changed these services automatically start Manual [Service of stylus, Tablet PC Input Service, Wacom Touch Customer Service] and I also have desselected features Windows Tablet). I did this because the Tablet has been rarely connected to the computer, but the processes that have been continuously running despite the fact that the tablet was not connected, (when we look in the Manager tasks) used a lot of memory. If you think that one of the two above (Norton or Wacom) causes, let me know and I will send you more information.

  If not for now, I guess I would say goodbye to all my files and default factory settings - IF HE WOULD ACTUALLY restore instead of give 1005 error messages.

  Thanks for any help

  

  Uncanny101 wrote: Hello, I have been unable to find the functionality you're talking about. This is the screen that appears when I press F10, select Advanced. I'm looking in the right place?

  

  Hello Uncanny101, the recovery restore partition may have been deleted. If it did, you wouldn't be able to use the F-10 or F - 11 key to access.

  You should be able to perform a new install with a Windows 7 disk, if there is no hardware failure.

  Just insert the Windows 7 in the optical drive and start the system. When you get to the place where you are asked where to install the operating system, look at the bottom of the page and you should see the partition. You should see two partitions, one of 100MBs more. Let the small partition of 100 such MB, because it contains the Windows 7 installation files. Select this option to remove the larger partition, and then create a new partition, quick format the new partition to continue.

  This should allow you to install a fresh Windows 7. You lost all the data you have added since you have the system, but because the installation failed, these data are probably already lost.