problems starting database recovery...
HP - UX 11.23Oracle 10.2.0.2
I know that this has been discussed a bit. I spent a number of hours on this forum only today just read through the success of the research. I tried some of the "tricks" that have been described in the nets. But I still get the same error...
My standby database lost connectivity to my receivers logs primary and arrested. I have not received any notification, because my scripts not implemented to capture this event...
On my primary retention policy is 30 days of archive logs. After that, they are deleted. (I don't agree with it, but not my call)
The waiting got more than 30 days out of sync, so I decided to just refresh the day before all.
Cold backup is not an option, I did an alter system checkpoint to empty all archive logs. Then, I published a full hot backup.
Once completed, I advanced and created a control file fresh intelligence, in addition to a fresh backup control file. In this exact order.
I have transferred all the archive logs and control files db more waiting.
I ran the commands:
startup nomount;
(SUCCESSFULLY)
ALTER database base_de_donnees eve of Mount;
(SUCCESSFULLY)
recover the database pending;
I have run all the files in the archives until newspapers she file errored saying that he could not find 'X' being the next sequence that was not in the directory. To my knowledge, is normal... time to stop recovery.
When I went to cancel, I get the following error.
Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
ORA-00279: change 7313561157126 September at 2008-12-17 19:01:02 to
thread 1
ORA-00289: suggestion: /oraarch/swesc/1_13729_640853326.arc
ORA-00280: change 7313561157126 thread 1 is in sequence #13729
ORA-00278: log file ' / oraarch/swesc/1_13728_640853326.arc' is no longer necessary for
This recovery
Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
Cancel
ORA-01547: WARNING: RECOVER succeeded but OPEN RESETLOGS would get below error
ORA-01152: 1 no file has been restored from a sufficiently old backup
ORA-01110: data file 1: ' / ora1/oradata/peregrine/system01.dbf'
Therefore, my understanding of what it means that you should always apply the logs.
So I grabbed the newspapers who had been self created during the time I have it all rebuilding and applied.
Same mistakes.
I am at a loss here. How can he still be out of sync? Is it possible to force it to a specific sequence so that I can open successfully, and then close it up to complete the sequence?
Thank you.
You have a few missing logs to make your atndby consistent database, apply more redo (which may be a primary database redo log files).
as you approach ORA-01152: 1 file was not restored from a sufficiently old backup is due to that you just applied it again archivelog files but don't do it again that is in the file primary journal again. That's what I was suggesting you im my last post which put your database in automatic or manual recovery mode after you have performed a primary database switch journal in order to obtain recovery located at the primary database redo log file.
Khurram
Tags: Database
Similar Questions
-
I have the database to Oracle 10 g (10.2.0.1.0) on Windows Server 2003
I took hot RMAN full backup of database.
I copied the backup files in the flash recovery area.
I have another computer with windows server 2003 and Oracle 10 g even version. I copied the backup files of the first machine to the file of the Flash recovery area on the second computer.
Now, I'm trying to restore the database from the first machine to the second machine.
1. I created a new instance on second machice with the same name as in the First machine.
2. I created a file password ORA as well.
3 SET ORACLE_SID = < name of DB as it was the first machine >
4 RMAN TARGET sys / < password given to the new pwd ORA file > @ < name DB > nocatalog
5 SET DBID = < dbid of the old database >
6 STARTUP NOMOUNT FORCE
7 RESTORE SPFILE FROM PFILE "< new pfile file path >" "< path where the backup files are there >."
8. CREATE UDUMP, BDUMP, CDUMP, PFILE ORADATA FILES when it is required;
9. STOP IMMEDIATELY;
10 STARTUP NOMOUNT PFILE = "< path to the newly created pfile > ';
11 RESTORE CONTROLFILE FROM "< backup file path >"
12. ALTER DATABASE MOUNT;
Everything works very well so far
Now, my next step was
13 RESTORE THE DATABASE;
Then it gives error as: -.
RMAN > restore database;
From restoration to 20 November 08
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid = 375 devtype = DISK
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the restore command at 2008-11-20 21:00:54
RMAN-06026: some targets not found - abandonment of restoration
RMAN-06023: no backup or copy of the file 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
First, I copied the Flash recovery area backup files, then I copied the files to "D:\oracle\product\10.2.0\db_1\database" as well. Because I did it in 9i, 9i I copied the backup files in the backup folder and while the RMAN restore successfully takes the file in this folder & restores the database. but in 10g RMAN is not to recognize the backup path. How can this problem be solved? Or is it a different problem that I don't get?
Waiting for response...You say, backups are on drive D, but RMAN is waiting for the files on drive E. But backups is not found or planned and therefore duplication of "EXPIRED" status reports For the same reason, the restore fails. Either you have to provide the intended location or re-catalogue of backupsets to a new location.
Werner
-
Problem starting database!
Hi people,
during a startup of DB that I received below err. codes:
Any ideas?Connected to: Oracle Database 11g Release 11.2.0.1.0 - 64bit Production SYS@AGD AS SYSDBA 14.08.12 SQL> shutdown immediate; Database closed. Database dismounted. ORACLE instance shut down. SYS@AGD AS SYSDBA 14.08.12 SQL> startup; ORA-12514: TNS:listener does not currently know of service requested in connect descriptor SYS@AGD AS SYSDBA 14.08.12 SQL> startup ORA-24324: service handle not initialized ORA-01041: internal error. hostdef extension doesn't exist SYS@AGD AS SYSDBA 14.08.12 SQL>
Help, please.(i) make sure that you are on the database server
(II) ensure that the OracleService is running
(III) start the database without using an entry of tns.for example if your instance is called AGD can
Open the Dos window:
set oracle_sid=AGD sqlplus / as sysdba startup;
NB: You may need to use a user name and password to connect to the db
eg sqlplus sys/
as sysdba Then you must also make sure that your listener is running
typelsnrctl status
Since the dos window on the database server. Your instance must be listed with a status of loan
-
Problem starting database Services
Hello
I use Oracle 10 g on Windows XP. Using cmd line utility, I tried to open Servicesutilisation Oracle suite order
C:\oracle\product\10.2.0\db_1\BIN > oradim-startup-sid ORACL2 usrpwd - base2 - starttype SRVC, INST - pfile C:\oracle\product\10.2.0\admin\Oracl2\pfile\init.ora
but when I try to run it it gives me following error
DIM-00003: an Argument is missing for the parameter.
Now, I think I have'nt don't miss no parameters. If I'm kidding well kindly tell me where is the problem.
Kind regards
D.AbbasiTry the following:
oradim-startup-sid ORACL2 usrpwd - base2 - pfile "C:\oracle\product\10.2.0\admin\Oracl2\pfile\init.ora."
-
problem in physical recovery standby database (Data Guard) by rman
Hi all
I created a physical database Eve, I want to make a backup of it by rman and when I lose datafile is that I can restore, backup and restore is fine, but in recovery I encounter a problem
scenarios is followed
1. in rman, I create a backup of database Eve by this command:
backup database more archivelog delete all entries;
2. I run this command in rman to recover standby database
Run {}
2 > set up what SNA 1392701.
3 > restore database;
4 > restore database;
{5 >}
(1392701 is extracted from this query "SELECT MAX (NEXT_CHANGE #) + 1 UNTIL_SCN FROM V$ LOG_HISTORY LH ')
V$ DATABASE DB WHERE LH. RESETLOGS_CHANGE #= DB. RESETLOGS_CHANGE # AND LH. RESETLOGS_TIME =
DB. RESETLOGS_TIME; (""http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/rman.htm")
but result RMAN is like this:
executing command: SET until clause
From restoration to 13 December 08
using channel ORA_DISK_1
channel ORA_DISK_1: from datafile backupset restoration
channel ORA_DISK_1: specifying datafile (s) to restore from
backup set
restoring datafile 00001 to /u01/app/oracle/oradata/sari/system01.dbf
restoring datafile 00002 to /u01/app/oracle/oradata/sari/undotbs01.dbf
restoring datafile 00003 to /u01/app/oracle/oradata/sari/sysaux01.dbf
restoring datafile 00004 in /u01/app/oracle/oradata/sari/users01.dbf
restoring datafile 00005 to /u01/app/oracle/oradata/sari/example01.dbf
restoring datafile to /u01/app/oracle/oradata/sari/users02.dbf 00006
channel ORA_DISK_1: reading of the backup/home/oracle/backup/0ek24dt4_1_1 element
channel ORA_DISK_1: restored the backup part 1
piece handle = / home/oracle/backup/0ek24dt4_1_1
tag = TAG20081213T042506
channel ORA_DISK_1: restore complete, duration: 00:01:07
Finished restoration to 13 December 08
From back to 13 December 08
using channel ORA_DISK_1
starting media recovery
archive log thread 1 116 sequence is already on the disk that the file /u01/app/oracle/oradata/archive/1_116_666786084.arc
archive log thread 1 sequence 117 is already on the disk that the file /u01/app/oracle/oradata/archive/1_117_666786084.arc
Archive newspaper filename=/u01/app/oracle/oradata/archive/1_116_666786084.arc thread = 1 sequence = 116
Archive newspaper filename=/u01/app/oracle/oradata/archive/1_117_666786084.arc thread = 1 sequence = 117
Cannot find the log archiving
archive log thread = 1 sequence = 118
RMAN-03002: failure of the command recover to 2008-12-13 05:14:13
RMAN-06054: recovery of media asking unknown journal: thread 1
SEQ 118 lowscn 1392700
3. then I refuse 1392701 to 1392700 and I run this command
Run {}
2 > set up what SNA 1392700.
3 > restore database;
4 > restore database;
{5 >}
executing command: SET until clause
From restoration to 13 December 08
using channel ORA_DISK_1
channel ORA_DISK_1: from datafile backupset restoration
channel ORA_DISK_1: specifying datafile (s) to restore from
backup set
restoring datafile 00001 to /u01/app/oracle/oradata/sari/system01.dbf
restoring datafile 00002 to /u01/app/oracle/oradata/sari/undotbs01.dbf
restoring datafile 00003 to /u01/app/oracle/oradata/sari/sysaux01.dbf
restoring datafile 00004 in /u01/app/oracle/oradata/sari/users01.dbf
restoring datafile 00005 to /u01/app/oracle/oradata/sari/example01.dbf
restoring datafile to /u01/app/oracle/oradata/sari/users02.dbf 00006
channel ORA_DISK_1: reading of the backup/home/oracle/backup/0ek24dt4_1_1 element
channel ORA_DISK_1: restored the backup part 1
total, handle = / home/oracle/backup/0ek24dt4_1_1 tag = TAG20081213T042506
channel ORA_DISK_1: restore complete, duration: 00:01:08
Finished restoration to 13 December 08
From back to 13 December 08
using channel ORA_DISK_1
starting media recovery
archive log thread 1 116 sequence is already on record as
file /u01/app/oracle/oradata/archive/1_116_666786084.arc
archive log thread 1 sequence 117 is already on record as
file /u01/app/oracle/oradata/archive/1_117_666786084.arc
archive log filename=/u01/app/oracle/oradata/archive/1_116_666786084.arc = 1 thread
sequence = 116archive log
filename=/U01/app/Oracle/oradata/archive/1_117_666786084.arc
thread = 1 sequence = error 117Oracle:
ORA-01547: WARNING: RECOVER succeeded but OPEN RESETLOGS
would get the below error
ORA-01152: 1 no file has been restored from a sufficiently old backup
ORA-01110: data file 1: ' / u01/app/oracle/oradata/sari/system01.dbf'
media recovery complete, duration: 00:00:10
Finished recover to 13 December 08
4. If I run
Run {}
restore the database;
recover the database;
}
I receive this error on step 2 (06054 RMAN: recovery of media asking unknown journal: thread 1)
SEQ 118 lowscn 1392700)
5. If I just restore the database and I do not perform a recovery by rman and I restart repeat if applies to all things seem well
but in the opening of database, I get ORA-01152: 1 file was not restored from a sufficiently old backup
Ora-01110: data file 1: ' / u01/app/oracle/oradata/sari/system01.dbf' error)
do you know what is the problem
Thank you
Published by: ARKH 12 December 2008 23:06This is because as soon as you open the standby database, application of roll forward stops. At least that's true up to 10 gr 2, 11 g, you have the option "Active Dataguard" (requires an additional license), which allows to apply, while the database is open.
Werner
-
Hi all
my situation is like this:
When I turn on my laptop I get a black screen with a flashing underscore above it "no boot device - insert boot disk and press any key" (even if the BIOS boot order a hard drive for laptop on top). I changed this order a couple of times because I used a USB stick with Windows 7 on it (black version) to enter System Recovery Options (without USB I can't access the system recovery (F11 doesn't work not).)
My System Recovery Options window is white/empty (no operating system, the size of the partition and the location). I'm going on and click repair system that did not help (it of a loop, do not start Windows). In the Diagnostics and repair of details it is Root cause found:
The partition table doesn't have a valid System Partition.
Repair action: Partition table repair
Result: Completed successfully. Error code = 0 x 0
That's because before this problem starting with underscore flashing, I had another problem: "BOOTMGR is missing. Press Ctrl + Alt + Delete to restart» I was impatient and wanted to fix that quickly and made a big mistake, after looking on the web for some time I have found no useful websites describing how to fix it (I found one when it was already too late). I went on a channel on youtube and came with: https://www.youtube.com/watch?v=S8n-G9Rv2zo before I didn't know what a clean install was, I looked up 03:55 and made perfect:
CMD:
DiskPart
list disk
Select disk 0
partition from the list
selected and deleted all 4 partitions (size: 215GB, 199 MB, GB, 103-17 MB)
created new partitions same dimensions (all the primary dimensions)
then I stopped and clicked on a cross (x) in cmd to get out when I came to a new window where I clicked on YES (I have not read what he was doing, I just wanted to go to bed because it was too late). Since there is no "BOOTMGR is missing. Press Ctrl + Alt + Del to restart"(damage because now I know how to fix this, I was just too stupid, impatient and irresponsible), there is just a line of underscore flashing with"No boot device - insert boot disk and press any key"any of the BIOS boot order is this sentence does not disappear. He did a couple of times before, but no more.
So after this long description, my question is:
Is there a way to recover my data which I assume is lost and can not restore? I have no backups or images.
P.S. I do not installed Windows 7, I just deleted partition table and created a new.
Sorry for my English, I'm not a native speaker. Thank you in advance.
Hi MatBar,
Thank you for visiting the Forums HP's Support and welcome. I'm sorry but there is no way to recover the data once you have deleted the partition. You could try a local repair facility, given that some devices of data to recover your data.
You may restore the Windows 7 operating system with disks if you find someone with the same version of Windows that you use their discs.
I hope this helps.
Thank you.
-
Problem starting the Lenovo recovery disks.
Hello
I just got a set of Lenovo recovery disks.
. It might be easy, but I've noticed a problemThere are 4 DVD in two procedure:
(1) system: ('start your recovery with this one')
Disc 1 of 1 - operating system recovery disk Win 7 Pro 32-bit SP1
Disc 2 of 2 - recovery disk Win 7 Pro SP1 64-bit operating system(2) apps:
Disc 1 of 2 - Applications and drivers recovery disk (64-bit)
Disc 2 of 2 - Applications and drivers recovery disk (64-bit)OK, so I want to me 64-bit install, put disc "(1) disc 2 of 2 [64 bit] ' but he wants to boot
After install from installation and disk boots ' (1) disc 1 of 1 [32 bit] ' go well until the first Windows start - and there is an error "Windows Setup cannot continue" / reset and loop.
Any ideas what shoul I do?
How to install 64-bit?Now I have my 'dead' edge please help!
[Edge E420s]
-edit - added msg of error screen after using '(1) disc 1 of 1 (32 bit) "and"(2). "Applications: disc 1 of 2 [64].
OK, SOLVED...
Lenovo send me ill-defined DVD
They put a 32 bit DVD version (1: 1) to the pack, and they must give me 64 bit (cd1/2)It looks like:
(1) system: ('start your recovery with this one')
Disc 1 of 1 - operating system recovery disk Win 7 Pro 32-bit SP1 (P/N 0B 737,89)
Disc 2 of 2 - operating system recovery disk Win 7 Pro SP1 64 bit (P/N 0B 73809)(2) apps:
Disc 1 of 2 - Applications and drivers recovery disk (64-bit)
Disc 2 of 2 - Applications and drivers recovery disk (64-bit)And should look like:
Disk 1 of 2: operating system Recovery Disc Windows® 7 Professional SP 1 disc 1 of 2 (P/N 0 B 73798)
Disc 2 of 2: operating system Recovery Disc Windows® 7 Professional SP 1 disc 2 of 2 (P/N 0B 73809)
Now I have to wait once more.
-
problem in the recovery of the database!
Hi all
I created a new database and wanted to restore the backup to a different database in it, I created the required tablespaces and began the restoration of RMAN backup by
Run {}
allocate channel 'dev_0' type 'sbt_tape '.
parms 'ENV = (OB2BARTYPE = Oracle8, OB2APPNAME = orcl OB2BARLIST = DAILY_HISDBS01_ORACLE-DB_ONLINE_5W, OB2BARHOSTNAME = hisdbs01.kfmc.med)';
Restore controlfile from "c-1179279249-20090511-02';
change the editing of the database;
free the channel "dev_0;
}
The obtained controlfile restored successfully, then I tried to restore and recover the database
Run {}
allocate channel 'dev_0' type 'sbt_tape '.
parms 'ENV = (OB2BARTYPE = Oracle8, central = OB2APPNAME, OB2BARLIST = DAILY_HISDBS01_ORACLE-DB_ONLINE_5W, OB2BARHOSTNAME = hisdbs01.kfmc.med)';
restore the database;
recover the database;
free the channel "dev_0;
}
The restoration was successful, but when I tried to open the database with the resetlogs option
SQL > alter database open resetlogs;
ALTER database open resetlogs
*
ERROR on line 1:
ORA-01194: file 1 needs a recovery more match
ORA-01110: data file 1: '+ DATADG/orcl/datafile/system.295.686609187 '.
SQL > restore database using backup controlfile until cancel;
ORA-00279: change 1136286903 September at 2009-05-11 02:08:22 for thread1
ORA-00289: suggestion: */arch/archivelog/1_8493_651861624.dbf*
ORA-00280: change 1136286903 thread 1 is in sequence #8493
Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
Cancel
ORA-01547: WARNING: RECOVER succeeded but OPEN RESETLOGS would get below error
ORA-01194: file 1 needs a recovery more match
ORA-01110: data file 1: '+ DATADG/orcl/datafile/system.295.686609187 '.
ORA-01112: media recovery not started
The recovery process is looking for */arch/archivelog/1_8493_651861624.dbf* this archivelog, but this archivelog file is not present at this location, the restore process should have restored all archivelogs as well, in fact any archivelogs didn't get restored, how can I recover the database without newspapers archivelog? It is not possible at all.
Please tell me how can I do the database work?Have you tried to restore the Archivelogs through RMAN manually, using "RESTORE ARCHIVELOG FROM TIME ="datestring "?
See if RMAN can detect the ArchiveLogs tape.
-
Hello
My Macpro 2.1 suddenly cannot start. When turned on, it shows the Apple logo, and
whirlly movement, then the screen becomes white lost the signal from the graphics card.
This could be the problem with the graphics card? Or the hard drive or CMOS?
Thanks in advance.
Probably a graphics card especially if yo have the original still installed map.
However
-Try to reset memory NVRAM/PRAM and SMC
MacIntel: Reset of the controller (SMC) system management
https://support.Apple.com/en-us/HT201295
Subject of memory NVRAM and PRAM
https://support.Apple.com/en-us/HT204063
-Try to start safe mode
OS x: what is Safe Boot, Safe Mode?
https://support.Apple.com/en-us/HT201262
-Start to recovery and repair the startup disk
OS X: on OS X Recovery - Apple Support
https://support.Apple.com/en-us/HT201314
-If it is repairable reinstall the OSX
How to reinstall OS X on your Mac - Apple Support
https://support.Apple.com/en-us/HT204904
-If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.
Format the boot disk and then do a fresh install of Mac OS x
Select a replacement if necessary graphics card, see:
Tip: Mac cards replacement Graphics Pro money Tour (2006-2012)
-
Satellite A100: Does not start a recovery DVDs
Hi guys.
First timer here.
I have read some of the Q & A on reboot problems the A100 since the recovery DVDs.
It seems I have the same problems as keith.I want to start all over again the OS and my laptop does not start from the DVD.
Tried the standard f12 boot from cd option. tried her "hold C on the boot option.
Both options end with no joy.The screen that says "loading ramdisk image", loads the machine breaks, asks me to wait, then every time the same thing.
The screen goes black, flashes very quickly and white and then loads from the hard disk as normal.Now try to hold my frustration and do something radical.
I know that in the Q & A previous, the subject is considered as replied...
other options?My following thoughts are to delete/uninstall almost every thing and try and force the thing to boot from the DVD.
have also copied the dvd and tried to boot from the copy, always with no joy.Are there any other suggestions?
Is it possible to put a partition in the existing drive and start the recovery dvd in there, then delete the junk of the original section of the drive, and then delete the partition?
is it possible to close all essential processes and format the HARD drive?
is it possible to reset the HARD drive somehow?
see you soon,
MartinHello Martin
To be honest, it's pretty strange question. There is one thing I am interesting for:
Is - this first time, you try to use a recovery media for the installation of the OS?If possible, try to get the Microsoft CD/DVD facilities to see if the same thing will happen.
In any case, I will try to give you answers to your questions.
> Is it possible to put a partition in the existing drive and to start the recovery dvd in there, then delete the junk of the original section of the drive, and then delete the partition?
It will not work. On the recovery of the media it is recovery image and this image must be installed correctly. You cannot "recover DVD in there. Not question> is it possible to close all essential processes and format the HARD drive?
I would like to know what you understand under the 'essential processes?> Is it possible to reset the HARD drive somehow?
You can't do this somehow. If you want to 'reset' HARD drive, you must delete the existing partition or delete any OS installation. After having done that, you need to install new OS. All this will be done at the beginning of the recovery procedure.I really don't understand what's wrong there. Please answer to my first question, and we will continue this discussion. ;)
-
Re: Satellite A300D-13 has: problems starting - starts not or only black screen
Hello, I have a Satellite A300D-13 has and the problem is, when I try to start the laptop for most, he tries to boot from the hard drive or the DVD drive but then he just stops and starts again immediately to do the same. In this case 4 or 5 times. Once it seems that it starts well, but the only thing I see is a black screen. And the keyboard does not work either.
If I try several time with closing by pressing the power button (you know who I mean), I managed it starts normally (but such a situation is always annoying). Moreover, it seems that this happens only when I did use the laptop for a while. So maybe it has something to do with the temperature. But more or less 20 ° C in my room.
In the Bios I have change the boot order of the sources (I can't change it much more)
I am grateful for any kind of help.
Thank you for your cooments in advanceHello
The issue could be related to software, but also for the hardware problem.
But first, we have to check if it s a software problem.You are using the original operating system preinstalled by Toshiba. Is this good?
AFAIK the most recent series of laptop is equipped with HARD drive recovery option.
In this case, the Toshiba Recovery DVD has not been delivered with the laptop but there is an option to create a.
HARD drive recovery option can be used to reinstall and update the operating system.
I would recommend to repair the operating system and reinstall it again by pressing the F8 key. The Advanced Startup menu should appear and then you must choose to repair your computer.This option will start the recovery procedure and the BONES to relocate again.
Please check if a new facility will improve the situation with Notepad.
In addition, it would be desirable to update the BIOS, if a newer version of the BIOS is available on the European driver Toshibas page.If this suggestion won't help you then whole notebooks material must be check by a local ASP.
-
Re: How to start the recovery from the hidden partition?
Sorry for my English.
I reinstalled Windows from DVD Windows (win Vista) because I get blue screen sometimes. After the reinstallation, I had the same problem again.
Now the shop wants to charge me for the service because recovery F8 does not work. I still have this hidden partition, but I put t know how to do the recovery. Any chance of fixing the problem?I don t care about the data and the blue screen, I think than is hardware problem.
Thank youHello
Now you have the problem. You can start the recovery folder HDDRecovery facility just if your laptop has the factory settings.
When you use Microsoft facilities disk for the installation of the operating system, this option will be gone.You have created recovery DVD such as recommended by Toshiba?
-
Problem creating drive recovery for Satellite L550-10N
Hello.
I just bought a L550-10N and the first thing I tried to do is to create recovery discs using the Toshiba recovery disc creator.
Everything went well on the first creation of disc (4 must be created).
The problem starts with the second disk: about when it's half burned, decisions of the gauge, the DVD drive continues to function for hours and never stops.I tried the process again, but it was exactly the same.
Anyone an idea how to solve this problem?
Thank you!
According to my experience, the best thing you can do is to create a recovery media using DVD-R virgins.
I have created for several different models of laptops using TDK or Verbatim DVD-R media, and every time everything was fine. -
Windows does not start after recovery
Hey, satellite 1800 started son to have more and more slow to the point where it took close to an hour to boot in Windows. It got to the stage where it seemed that recovery from the CD was the only road - so we did. Everything had to look successful from the point of view of recovery but the installer of Windows XP displays "Please wait...". "with the normal activity of the disc looking for 20-30 seconds and then hangs - no disk activity, the mouse is not responding. I went through the recovery in "expert" mode and don't see any problems with the recovery process. Issues related to the:
1 no matter who else seen elsewhere?
2. what else can I do diagnosis-wise?
3 which, basically, the recovery process not / (fact he re - format partitions, could it have left a virus?)
4. I'm better h/w or s/w diags?Bitshifter
Hi Bitshifter,
topic of your question 3:
The recovery process replaces the whole HARD drive or even a partition with an image created by Toshiba. This image contains an operating system, drivers, and a few basic programs. All other data (including viruses) in this partition will be deleted.question 4:
I don't know the cause of your problem, but I think it's a hardware problem, because after recovery, there may be incorrect or missing software.Sorry I can't give you more information.
Good luck! -
Cannot start Toshiba Recovery Disc Creator on my Satellite A300 - 15K
Hello! I'm of the Poland if my English is a bit poor... (but I hope that's enough)
My problem:
I don't have a recovery (DVD) drive because I use earlier Recobery of Toshiba Disc Creator (when everything in my laptop was good).
Now, I didn't make this record because when I run Toshiba Recovery disc Creator I have an error:
"EWC program launch and create for DRC Recovery partition _przestaa INI files? Dziaa? ndmam§a? (has stopped working) _
Error details:
Zdarzenia problemu name: APPCRASH
Name aplikacji: TRORDCLauncher.exe
Wersja aplikacji: 1.0.0.1
Aplikacji czasowa Sygnatura: 4682674e
Name Modua? u z Ba? ? Dem: WIMGAPI. DLL
Wersja Modua? u z Ba? ? Dem: 6.0.6001.18000
Sygnatura czasowa Modua? u z Ba? ? Dem: 4791a7a6
Kod Wyja? tku: c0000135
Przesunia? Wyja cie? tku: 00009cac
Wersja systemu operacyjnego: 6.0.6001.2.1.0.768.3
Identyfikator Ustawiea? z: 1045
Information 3.Dodatkowe 1: 9 day 13
3.dodatkowe information 2: 1abee00edb3fc1158f9ad6f44f0f6be8
3.dodatkowe information 3: 9 day 13
3.dodatkowe information 4: 1abee00edb3fc1158f9ad6f44f0f6be8Read our przypadku PBN Poufnoa? This informacji:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0415"
Hello
Have you changed anything on your laptop?
I mean if your HARD drive recovery partition has been changed or the data partition thin o has been removed?To be honest, for me, it looks like the issue of the BONE. I think that it s not a question of simple tool, but I think that the operating system was confused
Maybe you should try to recover the laptop using Toshiba HDD recovery and after the new installation of operating system on your laptop, you can try to create the recovery disk again.
To start the recovery, you must press the F8 key immediately after the laptop has been powered. Then, you choose the first option called fix my computer.
This would lead to a new window and there, you could choose Toshiba HDD recovery.But note; This recovery would format the whole HARD drive then perhaps you need to back up data before you start this procedure.
Maybe you are looking for
-
new url appears in the address bar when you click on a link
There is a particular question, that I just noticed. Since upgrading to FF v4.0 RC1, it seems every time I click on a link in a Web page or in a google search (even open a bookmark link), when the new page opens, the url of the new page does not appe
-
New T410 - Windows7 - not active SLEEP
Just got a T410 with Windows 7. Cannot get active SLEEP. In the menu START there is RESTART and HIBERNATE (I found how the right) but the SLEEP is not active (and gray). I did some research but in vain. Help, please!
-
Keyboard and mouse do not work
I have a HP Media Center M7100e. I have just completed a system recovery. After reboot, the screen indicates that I click next to complete the installation. The mouse and keyboard do not work. Work on the initial startup of hp screen, but are disa
-
I was the proud owner of the new X 1 thinkpad notebook for a few weeks. I even ordered the battery slice that came last week. I used my X 1 last night, then I stopped and left charge (with the battery slice installed too) during the night I had to
-
Cannot delete or rename a file Word via Windows Explorer
Windows 7 - Word 2007. Modification of a file .doc (compatibility mode) where the word went into a loop where it ignored all the entries. I waited for half an hour and finally had to stop the word with the Task Manager. The file that was opened at th