Eve stop applying the archivelogs

Hello

yesterday, in order to purgering flashback logs (it occupy much space FRA) in standby mode, I am a past "restore point" waiting for database and journal of a return of flame 'rm - r' (because not very sure, then rm only back log).

That's what I did

CC:
To remove the eternal Flashback Logs, you must do the following:
(1) file restore Points guaranteed that you don't need (e.g. drop restore point = > done in standby mode)
(2) set the init DB_FLASHBACK_RETENTION_TARGET adequately = > done in standby mode
(3) log as root and run the following statements:
ls - lrt .../flashback|tail - 100 = > only "rm" a flashback, log (asm)
prepare the delete statement for each file that you want to remove
(rm - f)

then this morning, I found last applied log is stuck yesterday afternoon. the stanby database does not apply archivelogs.
SYS > change recover managed standby database disconnect log file using current;
change recover managed standby database using current log file is disconnected
*
ERROR on line 1:
ORA-01153: an incompatible media recovery is active


Any idea to solve this problem?

Thank you

Hello again;

I'm not an abandonment of the judgment.

You want to avoid that because Oracle can bark loud and you could make your problem worse.

Check the last 100 lines of your alert standby of warnings and error log and display the results.

Best regards

mseberg

Tags: Database

Similar Questions

  • How to stop the bridge to automatically apply the profile to images?

    Adobe Bridge (CS6) seems always automatically apply the profiles of lenses (vignetting correction) my photos. I don't want to do that, I want the images have no correction applied by default. How can I do this?

    Thank you

    Dave

    Assume that you are talking about Camera Raw.  Depends on what you have set to the defaults in ACR.  You can set your own preferences and make sure the default value.

    There is also an Ant raw camera at http://forums.adobe.com/community/cameraraw if you have more in-depth questions.

  • iPod has stopped playing the music-now will not turn on / reset

    So I got this ipod as a month or two. The last of its kind in the store, except if I supposedly online. It's a 160 GB classic and it works fine so far. At all my 1500 songs on it so far and he was playing them very well yesterday. Put it on the charger, yesterday evening, and all of a sudden after I took it it stopped working. Tried to play a song about him and he just wouldn't it kept making a sound as he wanted to start up, but it didn't. Tried to change the song, in which case it was that, and he didn't play anything. Tried to reset it and by plugging it back into the computer and now it loads the apple logo, but he ends up to a screen with an o and an x in the Middle saying to go to apply the support... I don't know what to do I want just my ipod to work again :/ It won't even load on the charger more

    See iPod displays an icon 'X' Red - Apple Support. Apple may not have much interest in the classic iPod service. The line was removed some time ago. See also Re: corrupted iPod classic. You can try to get the stats, but my guess is that it will fail open player.

    TT2

  • HP 7525 causes my internet connection to stop when the 7525 is on

    I use:

    PC _ HP Pavilion P7-1451

    64-bit Edition of Windows 8

    Cisco WRT400N router

    Printer HP 7525

    I just bought the 7525 yesterday. No problem installing it through my router. When the printer is powered but not in use, my PC (3 ones separated in different rooms) lose the internet connection after a few laps short irregular time. I have to unplug the router and the modem and then reconnect them to re-establish the internet connection. The recommendation of this group, I have reset the printer to a x.x.x.250 IP static. The printer connects very well and I can print from the PC.but meant few PC again lose the internet connection. I then set the modem and the router. When I turn ther printer off, the PC stay connected to the internet.

    I had zero connect problems with this router since I bought it a few years ago. The problem only occurs when the printer is on.

    Obviously, it's a royal pain in the anus. Help!

    We will set a static IP address AND an external DNS for the printer:

    -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
    -Enter the IP address in a browser to reveal the internal settings of the printer.
    -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
    -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
    -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
    -Enter the IP of your router (on the Page of the Network Config) for the gateway.
    -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
    -Click 'apply '.

    Now, stop the router and printer, start the router, wait, and then start printing.

  • Fatal error C0000034 applying the operation update 282 117809 (_00000...)

    While improving a W7 x86_64 installation in VirtualBox, virtual machine crashed (not associate Windows) after the update has been downloaded and installed, but before stopping and restarting.

    Now I get "fatal error C0000034 applying the update 117809 (_00000...) 282 operation" error every time I start up the virtual machine. Startup Repair and Safe Mode, last good known Configuration did not help (impossible to find problems, suspended and hung respectively). I believe that I have also disabled the system restore.

    If I not mistaken, the vm crash caused the installation of MS in missing a step that was supposed to be done so that the closing.

    Help me!

    The Solution:

    http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/1c9a7151-b48c-4a98-aae7-a4b82682ea8e/#bcabda57-7338-499F-aee2-d708e76df315

  • apply the patch for acs unit

    I was wondering if someone can help me to update my ACS camera with patch 4.1.1.23.4 - SW. It's simple to apply it in a normal server, 2000. The ACS unit according to me is different because we can access through normal terminal, keyboard and mouse.

    Some I had to read it is necessary a tomcat server?

    Help, please

    ADI

    Hello

    ACS v4.1.1.23 patch 5 is available then go for this new patch.

    You should have a pc that can access the ACS through the web interface. Keep the file of fix on the PC.

    Follow the steps below on the PC:

    [1] extract zipped file

    [2] get? Autorun.exe? file and double-click it

    [3] it will start a server tomcat on your desk and you? 'll see a web page asking ACS

    IP SE:

    Provide the IP ACS SE and the press? Install?

    [4] he will ask for ACS admin username and password as shown below:

    Specify the user name and the password and connect.

    [5] then he raise ACS GUI, then go to

    System configuration > device upgrade status > download,.

    Then we? 'll get a screen where it will ask for the ip address of the server to install:

    Provide the ip address of the system where we apply this patch, in our case our

    ip address of office, and then click on connect.

    [6] he will show us after screen:

    Click on? Download now?

    Then he? show us this screen:

    Press? Refresh? Until we see the following screen:

    [7] now, press on? Apply the update? Then he? He wants confirmation:

    Press? Update?, then we? 'll get information about the patch.

    Click on? Yes?.

    It? LL take a few minutes to apply this hotfix on the device.

    Then he? show us a confirmation message:

    Press? Fact?, then the system will restart.

    To confirm that the patch has been applied successfully, goto

    System configuration > status upgrade unit

    After all right, stop the tomcat server by clicking on? stop server distribution? or

    If you want to apply this hotfix on a device more click on? Install following?

    I hope this helps.

    ~ Rohit

  • How to apply the patch to power supply in an environment of dataguard

    I need to apply a patch of power supply in an environment of dataguard. I would like to know the sequence of steps I must follow.

    Can someone please help me on this? DB version is 11.2.0.4 and I need to apply 11.2.0.4.3 PSU.

    In order to apply the fix, you must first carefully read the "Readme" of the patch for instructions.

    To give an overview of the sequence of steps to follow to apply a patch in environment dataguard, here it is:

    1 reporter on the primary to the standby log shipping.

    2 cancel the MRP on the standby database.

    3. apply the patch of power supply on the standby server. -See the Readme for instructions.

    4. ensure that the standby db is mounted and the earpiece is in place on the standby server.

    5. do not run any script correction on the standby database.

    6. apply the patch of power supply on the principal server.

    7. make sure that your primary database and the listener on the primary server is running.

    8 turn on the primary to the standby log shipping.

    9 start the MRP on the standby database.

    10. run the script of correction (catbundle.sql) on the primary database and monitor the progress of the eve of the resumption.

    Please refer to this

    How do you apply a group of patches, the power supply or the CPU in a configuration of data secondary physical custody (Doc ID 278641.1)

    Applying the fix to power supply in a dataguard environment (physical Standby). Shivananda Rao

    HTH

    -Jonathan Rolland

  • How to apply the patch in oracle 12 c

    Hello

    Is there a correct way to apply a patch in oracle 12 c.

    Database is up and running (in open mode / read, write)

    No application is connected to the database

    But it seems that his is not successful.

    [oracle@localhost 19504744] $ opatch apply

    Setup Oracle interim Patch version 12.1.0.1.10

    Copyright (c) 2015, Oracle Corporation.  All rights reserved.

    Oracle home: /home/oracle/app/oracle/product/12.1.0/dbhome_1

    Inventory Center: / home/oracle/app/oraInventory

    from: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc

    OPatch version: 12.1.0.1.10

    YES version: 12.1.0.2.0

    Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

    Check the environment and performing preliminary controls...

    Skip patch 19504744 list of patches to apply: this patch is not required.

    After ignoring the patches with missing components, there are no patches to apply.

    OPatch Session is complete warning.

    Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log


    cat /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

    [December 7, 2015 02:06:59]     OPatch invoked as follows: «apply - invPtrLoc /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc»

    [December 7, 2015 02:06:59]     Could not make central inventory using NGOUI; oracle.sysman.nextgen.utils.NextGenInventoryUtil

    [December 7, 2015 02:06:59]     YES-67077:

    Oracle home: /home/oracle/app/oracle/product/12.1.0/dbhome_1

    Inventory Center: / home/oracle/app/oraInventory

    from: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc

    OPatch version: 12.1.0.1.10

    YES version: 12.1.0.2.0

    YES location: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oui

    Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

    [December 7, 2015 02:06:59]     History of patch file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/opatch_history.txt

    [December 7, 2015 02:07:01]     [PRRO-MEMORY-1]: after call to installInventory.getAllCompsVect (): 23 (MB)

    [December 7, 2015 02:07:01]     [PRRO-MEMORY-2]: before loading cooked a stop: 23 (MB)

    [December 7, 2015 02:07:01]     [PRRO-MEMORY-3]: after loading before loading minipatch and rawOneOffList list in a cooked off: 23 (MB)

    [December 7, 2015 02:07:01]     [PRRO-MEMORY-4]: after completing cookedOneOffs and when the inventory is loaded...: 23 (MO)

    [December 7, 2015 02:07:01]     Check the environment and performing preliminary controls...

    [December 7, 2015 02:07:01]     Checking for conflicts between the colonies...

    [December 7, 2015 02:07:01] checkConflictAmongPatchesWithDetail start-> Mon Dec 07 02:07:01 PST 2015

    [December 7, 2015 02:07:01]     Mon Dec 07 02:07:01 PST 2015

    [December 7, 2015 02:07:01]     Adapter can go list: 19504744

    [December 7, 2015 02:07:01]     Not need adapter list:

    [December 7, 2015 02:07:01]     List of self-catering maps:

    [December 7, 2015 02:07:01] checkConflictAmongPatchesWithDetail thin-> Mon Dec 07 02:07:01 PST 2015

    [December 7, 2015 02:07:01]     Intra-conflict control PASSED

    [December 7, 2015 02:07:01]     Checking whether Oracle Home has components required by tasks...

    [December 7, 2015 02:07:01]     Check if the "19504744" patch is a patch of no-op.

    [December 7, 2015 02:07:01]     Opt. comp. not in inventory OH: oracle.rdbms, 12.1.0.2.0

    [December 7, 2015 02:07:01]     [oracle.rdbms, 12.1.0.2.0]

    Skip [7 December 2015 02:07:01] patch 19504744 list of patches to apply: this patch is not required.

    [December 7, 2015 02:07:01]     CheckMissingComp: hash match, re - build SWFs

    [December 7, 2015 02:07:01]     YES-67124:

    After ignoring the patches with missing components, there are no patches to apply.

    [December 7, 2015 02:07:01]     UtilSession: N-apply is.

    [Dec 7, 2015 2:07:01 AM]     --------------------------------------------------------------------------------

    [December 7, 2015 02:07:01]     The following warnings occurred during execution of OPatch:

    ([7 December 2015 02:07:01] 1) YES-67124:

    After ignoring the patches with missing components, there are no patches to apply.

    [Dec 7, 2015 2:07:01 AM]     --------------------------------------------------------------------------------

    [December 7, 2015 02:07:01]     YES - 67008:OPatch Session is complete warning.

    [December 7, 2015 02:07:01]     Finishing UtilSession in Mon Dec 07 02:07:01 PST 2015

    [December 7, 2015 02:07:01]     Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

    [December 7, 2015 02:07:01]     YES - 67008:OPatch Session is complete warning.

    1. not a correct way to apply the patch

    2. you must stop your database - instance. Since patch applies it would execute a re-release of links (as the binaries are access it would apply)

    Look in your current patch its not needed

    Skip [7 December 2015 02:07:01] patch 19504744 list of patches to apply: this patch is not necessary. (if you can't find the question)


    Please refer to the documentation opatch 12 c, atleast see the patch readme.txt (Please spend some time this basic thing every DBA should do - do not jump).


    Update:


    Check the environment and performing preliminary controls...

    Jump list of patches to apply 19504744 patch : this patch is not necessary.


    Clearly it indicating information

    -Pavan Kumar N

  • Apply the Patch IE11

    Hello

    I use JDev 11.1.2.4.0 in windows 8.1

    I want to run my ADF application locally my JDeveloper and run in IE11. Here are the steps I followed:

    I closed JDeveloper and weblogic Server embedded

    1-DOWNLOAD patch 18277436 as in https://blogs.Oracle.com/jdeveloperpm/entry/oracle_jdeveloper_and_adf_patches

    2 - this patch has 2 patches (18277436/Yes & 18277436 / his). I opened me read file and I found that I have to use 18277436 / her for 11.1.2.4.0.So JDev, I'll use the patch 18277436 / his

    3 - I opened the folder of his and I follow the steps in the readme file.

    4. I downloaded the OPatch p5912518_111000_GENERIC.zip.

    5. in C:\Oracle\Middleware\jdeveloper I extracted the folder OPatch

    6. I open cmd and write ORACLE_HOME = C:\Oracle\Middleware\jdeveloper

    7. I go to the patch path and then apply the patch as C:\18277436\sa\18277436 > C:\Oracle\Middleware\jdeveloper\OPatch\opatch apply - jdk C:\Oracle\Middleware\jdk160_24

    Citing O Patch 11.1 .0.0.1

    Setup Oracle interim Patch version 11.1.0.0.1

    Copyright (c) 2011, Oracle Corporation.  All rights reserved.

    Oracle home: C:\Oracle\Middleware\jdeveloper

    The Oracle Home Inventory: C:\Oracle\Middleware\jdeveloper\sainventory

    OPatch version: 11.1.0.0.1

    Product information: C:\Oracle\Middleware\jdeveloper\product.xml

    Location of the log file: C:\Oracle\Middleware\jdeveloper\cfgtoollogs\opatch\opatch2015-06-19_12-29 - 03 PM .log

    History of patch file: C:\Oracle\Middleware\jdeveloper\cfgtoollogs\opatch\opatch_hiMobyDick.txt

    Fix provisional application '18277436' ApplySession to OH ' C:\Oracle\Middleware\jdeveloper'

    Prior running check...

    Please stop Oracle instances miss this ORACLE_HOME on local system.

    (Oracle Home = "C:\Oracle\Middleware\jdeveloper")

    The local system is ready for the patcher? [y | n]

    There

    The user responded with: Y

    Backup of files and inventory (no self-catering) for the Oracle home

    Backup of files affected by the patch "18277436" for the restoration. It may take a while...

    Backup of files affected by the patch "18277436" for the restoration. It may take some time...

    Patching component oracle.jdeveloper, 11.1.2.4.0...

    Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\adf-richclient-api - 11.jar '

    Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\adf-richclient-automation - 11.jar '

    Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\adf-richclient-impl - 11.jar '

    Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\adf.oracle.domain.webapp.war"

    Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\dvt - faces.jar '

    Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\trinidad - api .jar '

    Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\trinidad - impl.jar '

    ApplySession adding temporary patch '18277436' to the inventory

    Checking for update...

    OK stock check: Patch ID 18277436 is part of the spirit of the inventory of Oracle Homemetadata good h.

    Files check OK: Patch ID 18277436 files are present at Oracle.

    The local system has been fixed, and it can be restarted.

    OPatch succeeded.

    If Opatch is successful.

    8 clear the tmp folder in [MW_HOME] / user_projects/domains / [domain_name] [SERVER NAME] /servers/ /tmp/

    9. I start my JDeveloper using C:\ > C:\Oracle\Middleware\jdeveloper\jdeveloper.exe -own

    10. I run my ADF JDeveloper application the IE11 open to access the application I got "browser not supported message.

    Why I got 'browser unsupported message' y at - it something missing?

    Is there an apply patch 18277436 in JDev 11.1.2.4.0 and run the application in IE11?

    Thank you.

    Try to follow the same steps that you did but set ORACLE_HOME = C:\Oracle\Middleware\oracle_common and extract oracle_common folder instead of the folder jdeveloper OPatch.

    If you get errors while applying the patch in oracle_common try to remove the middleware House and re-JDeveloper Setup again.

  • v13.0.3.495 - cannot change the tab stops in the paragraph Designer

    Don't know whether or not it was a problem in recent versions (haven't adjusted the tab stops in a while).

    I have a paragraph format with:

    -First = 0.25 "

    GCH - 0.5 "

    -Tab stop = 0.375 "L

    I tried to change the tab stop on a 0.5 "W, went into the designer of paragraph, under the direction of tab stops, changed the value, you click on continue.

    Paragraph designer reappeared, stop tab value appeared as 0.5 "L for a while, and then returned to 0.375".

    No idea why this is happening or how to fix?

    Thank you.

    I had almost the same problem (also FM 13.03.495) a few weeks ago. I tried to change a tab stop from left to right, aligned. If I remember correctly, I clicked on apply in the paragraph Designer, and then the tab stop setting is returned to its original state.

    I have not noticed that in a single file. Since I couldn't reproduce this with other files, I ignored this problem. I think I've changed this tab stop in another file and copy the paragraph format in the problematic file.

  • Apply the fix of the ASM

    Hi all

    Recently, we have applied the patch on one of our instance ASM, we've reached ORA-04031 on ASM instance. Oracle, we propose to apply the patch and one of my colleague came with these steps and

    We have applied the fix successfully. I have a few questions about these steps. I would be grateful, if you could offer your expert advise on my questions.

    In step 1, we use SRVCTL to stop all the instacnes running on a single box. We have about 46 instance that is running on this node

    My question is, setp 1, mean-o and s flag done.

    In step 2, this makes sudo for < GRID_HOME > is to use the rootcrs.pl - unlock.

    On step 4, we have applied the patch to GRID_HOME, but must understand usage - oh flag

    New on stp 5, why we need to perform step number 5

    It starts at step 6, all instances by using srvct, but just curious, by the way, why we need to provide the file ampxt1d1_status with flag - n.

    1. this task is to apply the patch of the ASM

    2. stop all the instance running on ampxd1d1.

    srvctl stop immediate home o < ORACLE_HOME > s/u01/patches/tmp/ampxt1d1_status n < nide > t

    3. run the script in root of pre.

    sudo /u01/app/11.2.0.3/grid/crs/install/rootcrs.pl-deverrouiller

    4. apply the patch using opatch

    opatch apply - oh local /u01/app/11.2.0.3/grid-/u01/patches/tmp/13951456

    5 run the suite.

    sudo /u01/app/11.2.0.3/grid/crs/install/rootcrs.pl-patch

    6 start the instance.

    srvctl start House o /u01/app/oracle/product/11.2.0.3/dbhome_1 s/u01/patches/tmp/ampxt1d1_status n

    Concerning

    Hello

    (1) the o Specifies the oracle House and s specifies a path for the command "srvctl stop home" store the State of the resources. in this case, command (srvctl stop home - o) stops anything running oracle home.

    (2) rootcrs.pl with - unlock flag unlocks the CRS home and make it ready to patch.

    (3) the - oh indicator command opatch specifies oracle home to work on. This takes precedence over the ORACLE_HOME environment variable

    (4) - patch flag of the rootcrs.pl command specifies the oracle home is upgraded and lock it.

    (5) control of House o srvctl start will start the oracle home and all service runs from this House.

    Kind regards

  • How to apply the PSU on Oracle RAC?

    Hello guys,.

    How about the Oracle RAC database without any stop PSU? (patch only database, not clusterware).

    Lets say I have 2 CCR node on different hosts with separate houses oracle/grid (no shared resources). What are the steps to avoid blackouts? I simply apply the last OPatch on grid/oracle homes, and then generate the oracle user ocm.rsp file and simply run as root: opatch auto/patch/path /-oh oracle_home - ocmrf /path/ocm.rsp and he will do everything for me on this node? then move service on node patched and do the same on another node? Oh, and there will be no interruption of service? Thank you!

    Gytis

    Hello

    Yes, the concept of a rolling patch is that the DB will always be upward, albeit on a node or another (or maybe 2 of 3, etc.)

    Check out this doc, spec 14.2.4 reduce planned downtime Maintenance

    Essentially an instance will come down in time. You can either manually a node patch or another, or well let Oracle patch bearing (but make sure you test it in the configuration of test first, if you have one, or else we put up with the same group of patches just in case).

    The idea is that the VIP relocate Node2, or if you use SCAN apps will detect node1 down.

    If possible, it is good to do this with a team Apps - ask them to move the connection with Betclic / application servers to the next node in the cluster, then the first patch (rolling patch), then exchange all node1 and make the node 2.

    The same steps apply for clusterware.

    See you soon,.

  • Purge the Archivelogs Dataguard

    Hi all

    11.2.0.3

    How can I set up my database PRIMARY and STANDBY auto purge all archivelogs (both primary and standby) already applied in waiting?

    While I don't have to worry about full archivelog in my FRA.

    Thank you all,

    pK

    Hello

    You should not care about people not confident in this respect.

    See the blog post I linked above. There is a bug in 11.2 and there is a solution. And there is a request to check when the archivelogs recoverable or not.

    I put in place that to several customers, where there is no 'archivelog delete' at all and Oracle manages the FRA. Just be sure that one of the following is executed frequently

    either RMAN > sql "begin dbms_backup_restore.refreshagedfiles; end; « ; or rerun the CONFIGURE ARCHIVELOG

    In any case, it is good to monitor the use of FRA of space, then you should be alerted if they are not purged as you want.

    Kind regards

    Franck.

  • After you apply the custom in admin_server weblogic keystore, server is not starting

    Hi all, (thanks in advance)

    I have a big problem today. I applied the SSL configuration for weblogic and OBIEE. It worked very well with the Keystore demo. After selfsigned keystore is created and applied to weblogic admin_server, the server will stop and now it does not start. Here is the log, I checked the name of user and password several times. also I removed the boot.properties file and it is generated again when starting.

    I used the following commands to generate custome keystore.

    $JAVA_HOME/jre/bin/keytool - genkey - keyalg RSA-alias selfsigned - keystore identity.jks.

    -dname "CN ="hostname", OR = my Department, O = my company, L = Birmingham, ST = West Midlands, C = en".

    -storepass password1-validity 3600 - keysize 2048 - keypass password1

    $JAVA_HOME/jre/bin/keytool - selfcert - v-alias selfsigned - keypass password1 - keystore identity.jks.

    -storepass password1 - jks-validity 3600 stores

    $JAVA_HOME/jre/bin/keytool - export - v-alias selfsigned-file ""hostname"- rootCA.der ' identity.jks - keystore------»»

    -storepass password1

    # Trust? Yes

    $JAVA_HOME/jre/bin/keytool - import - v - trustcacerts-alias selfsigned-file ""hostname"- rootCA.der".

    -keystore trust.jks - storepass password1

    ####<Apr 28, 2014 6:46:00 PM GST> <Info> <WebLogicServer> <MYHOSTSERVER> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1398696360069> <BEA-000000> <WebLogic Server "AdminServer" version:
WebLogic Server 10.3.5.0  Fri Apr 1 20:20:06 PDT 2011 1398638  Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.> 
####<Apr 28, 2014 6:46:00 PM GST> <Notice> <Log Management> <MYHOSTSERVER> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1398696360215> <BEA-170019> <The server log file /u01/app/obiee/user_projects/domains/bifoundation_domain/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.> 
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Log Management> <MYHOSTSERVER> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1398696360232> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.> 
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Diagnostics> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360426> <BEA-320001> <The ServerDebug service initialized successfully.> 
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360522> <BEA-002622> <The protocol "t3" is now configured.> 
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360522> <BEA-002622> <The protocol "t3s" is now configured.> 
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360522> <BEA-002622> <The protocol "http" is now configured.> 
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360523> <BEA-002622> <The protocol "https" is now configured.> 
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360524> <BEA-002622> <The protocol "iiop" is now configured.> 
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360524> <BEA-002622> <The protocol "iiops" is now configured.> 
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360525> <BEA-002622> <The protocol "ldap" is now configured.> 
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360526> <BEA-002622> <The protocol "ldaps" is now configured.> 
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360530> <BEA-002622> <The protocol "cluster" is now configured.> 
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360531> <BEA-002622> <The protocol "clusters" is now configured.> 
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360536> <BEA-002622> <The protocol "snmp" is now configured.> 
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360536> <BEA-002622> <The protocol "admin" is now configured.> 
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360536> <BEA-002624> <The administration protocol is "t3s" and is now configured.> 
####<Apr 28, 2014 6:46:00 PM GST> <Info> <RJVM> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360571> <BEA-000570> <Network Configuration for Channel "AdminServer"
 Listen Address         :7002 (SSL)
 Public Address         N/A
 Http Enabled         true
 Tunneling Enabled     false
 Outbound Enabled     false
 Admin Traffic Enabled     true> 
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Server> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360611> <BEA-002609> <Channel Service initialized.> 
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Socket> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360633> <BEA-000415> <System has file descriptor limits of - soft: 4,096, hard: 4,096> 
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Socket> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360633> <BEA-000416> <Using effective file descriptor limit of: 4,096 open sockets/files.> 
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Socket> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360634> <BEA-000406> <PosixSocketMuxer was built on Apr 24 2007 16:05:00> 
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Socket> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360658> <BEA-000436> <Allocating 4 reader threads.> 
####<Apr 28, 2014 6:46:00 PM GST> <Info> <Socket> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360659> <BEA-000446> <Native IO Enabled.> 
####<Apr 28, 2014 6:46:00 PM GST> <Info> <IIOP> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696360842> <BEA-002014> <IIOP subsystem enabled.> 
####<Apr 28, 2014 6:46:09 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696369085> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.> 
####<Apr 28, 2014 6:46:09 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696369777> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT> 
####<Apr 28, 2014 6:46:10 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696370127> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_POF2C8zjWtAwo24sMoFyQ+Komsg=> 
####<Apr 28, 2014 6:46:10 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696370185> <BEA-090074> <Initializing Authenticator provider using LDIF template file /u01/app/obiee/user_projects/domains/bifoundation_domain/security/DefaultAuthenticatorInit.ldift.> 
####<Apr 28, 2014 6:46:10 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696370328> <BEA-090075> <The Authenticator provider has had its LDIF information loaded from: /u01/app/obiee/user_projects/domains/bifoundation_domain/security/DefaultAuthenticatorInit.ldift> 
####<Apr 28, 2014 6:46:10 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696370690> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find /u01/app/obiee/user_projects/domains/bifoundation_domain/servers/AdminServer/data/ldap/XACMLAuthorizermyrealmInit.initialized, will load full LDIFT.> 
####<Apr 28, 2014 6:46:10 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696370716> <BEA-090074> <Initializing Authorizer provider using LDIF template file /u01/app/obiee/wlserver_10.3/server/lib/XACMLAuthorizerInit.ldift.> 
####<Apr 28, 2014 6:46:11 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696371107> <BEA-090075> <The Authorizer provider has had its LDIF information loaded from: /u01/app/obiee/wlserver_10.3/server/lib/XACMLAuthorizerInit.ldift> 
####<Apr 28, 2014 6:46:11 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696371736> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find /u01/app/obiee/user_projects/domains/bifoundation_domain/servers/AdminServer/data/ldap/DefaultCredentialMappermyrealmInit.initialized, will load full LDIFT.> 
####<Apr 28, 2014 6:46:11 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696371737> <BEA-090827> <LDIF template file /u01/app/obiee/wlserver_10.3/server/lib/DefaultCredentialMapperInit.ldift was empty. The WebLogic provider CredentialMapper has been bootstrapped but has not been initialized with any LDIF data.> 
####<Apr 28, 2014 6:46:11 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696371753> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find /u01/app/obiee/user_projects/domains/bifoundation_domain/servers/AdminServer/data/ldap/XACMLRoleMappermyrealmInit.initialized, will load full LDIFT.> 
####<Apr 28, 2014 6:46:11 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696371753> <BEA-090074> <Initializing RoleMapper provider using LDIF template file /u01/app/obiee/user_projects/domains/bifoundation_domain/security/XACMLRoleMapperInit.ldift.> 
####<Apr 28, 2014 6:46:11 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696371787> <BEA-090075> <The RoleMapper provider has had its LDIF information loaded from: /u01/app/obiee/user_projects/domains/bifoundation_domain/security/XACMLRoleMapperInit.ldift> 
####<Apr 28, 2014 6:46:12 PM GST> <Info> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696372038> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server AdminServer for security realm myrealm.> 
####<Apr 28, 2014 6:46:12 PM GST> <Notice> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696372038> <BEA-090082> <Security initializing using security realm myrealm.> 
####<Apr 28, 2014 6:46:12 PM GST> <Critical> <Security> <MYHOSTSERVER> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1398696372064> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.> 
####<Apr 28, 2014 6:46:12 PM GST> <Critical> <WebLogicServer> <MYHOSTSERVER> <AdminServer> <main> <<WLS Kernel>> <> <> <1398696372067> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:959)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
    at weblogic.security.SecurityService.start(SecurityService.java:141)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User weblogic javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User weblogic denied
    at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:261)
    at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
    at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
    at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
    at java.security.AccessController.doPrivileged(Native Method)
    at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
    at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
    at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
    at $Proxy36.login(Unknown Source)
    at weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceImpl.login(WLSJAASLoginServiceImpl.java:89)
    at com.bea.common.security.internal.service.JAASAuthenticationServiceImpl.authenticate(JAASAuthenticationServiceImpl.java:82)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
    at $Proxy54.authenticate(Unknown Source)
    at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)
    at weblogic.security.service.PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:348)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:929)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
    at weblogic.security.SecurityService.start(SecurityService.java:141)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
> 
####<Apr 28, 2014 6:46:12 PM GST> <Notice> <WebLogicServer> <MYHOSTSERVER> <AdminServer> <main> <<WLS Kernel>> <> <> <1398696372142> <BEA-000365> <Server state changed to FAILED> 
####<Apr 28, 2014 6:46:12 PM GST> <Error> <WebLogicServer> <MYHOSTSERVER> <AdminServer> <main> <<WLS Kernel>> <> <> <1398696372143> <BEA-000383> <A critical service failed. The server will shut itself down> 
####<Apr 28, 2014 6:46:12 PM GST> <Notice> <WebLogicServer> <MYHOSTSERVER> <AdminServer> <main> <<WLS Kernel>> <> <> <1398696372147> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN> 
####<Apr 28, 2014 6:46:12 PM GST> <Info> <WebLogicServer> <MYHOSTSERVER> <AdminServer> <main> <<WLS Kernel>> <> <> <1398696372164> <BEA-000236> <Stopping execute threads.>

    ####

    > <> <1398701431045>

    Can you check if SSL is listening on the port is enabled.

    Now that you cannot start the server administrator, check the file config.xml.

    You should see the following topics:

    AdminServer

    true

  • What happens if RMAN has stopped in the Middle?

    How can manage us if RMAN being stopped in the Middle?

    Restart RMAN backups

    With the reusable backup feature, RMAN backs up only files that were not saved after a specified date.

    bootable backup

    The feature that allows to RMAN back up only the files that have not been backed up since a specified date. Restart unit ended last backup set or copy of the image. You can use this feature after a backup fails to save the parts of the database behind the backup failed.

    On redemarrables backups

    The minimum unit of restart is a data file. However, if a backup set contains a backup piece, and this piece contains blocks of several data files, then restart unit is the backup piece. The reboot to get copies of the image unit is a data file.

    The advantage of redemarrables backup is that if the backup generates multiple backup sets, then backup completed successfully sets do not be rerun. However, if the entire database is written in a backup set, and if the backup fails to halfway through, then the whole of the backup should be repeated.

    IO errors that RMAN meets when reading files or writing for the backup pieces or copies of the RMAN image put an end to the current backup task. For example, if RMAN tries to save a file of data, but the data file is not on the disk, then RMAN complete backup. If several channels are used or redundant backup copies are created, then RMAN can however be able to continue the backup without user intervention.

    RMAN can back up only the files that have not been backed up since a specified date. Use this function after a backup fails to save the parts of the database behind the backup failed.

    You can reboot a backup by specifying the SINCE TIME clause on the BACKUP command. If the SINCE TIME is later than the time of execution, then RMAN backs up the file. If you use BACKUP DATABASE NOT BACKED UP without the SINCE TIME parameter, then RMAN backs up only files that have never been backed up.

    Restart a backup after having partially completed

    Use of the SINCE TIME parameter of the BACKUP command to specify a date after which a new backup is necessary. If the SINCE TIME is later than the time of execution, then RMAN backs up the file. If you use BACKUP DATABASE NOT BACKED UP without the SINCE TIME parameter, then RMAN backs up only files that have never been backed up.

    To back up only files which have been saved after a specified date:

    1. Start RMAN and connect to a catalog of database and recovery target (if used).
    2. Run the BACKUP ... NOT BACKED UP SINCE TIME command.

      Specify a valid date in the SINCE TIME parameter. The following example uses the default channel configured to back up all database files and logs archived recovery that have not been backed up during the last two weeks:

      BACKUP NOT BACKED UP SINCE TIME 'SYSDATE-14' DATABASE PLUS ARCHIVELOG;

Maybe you are looking for