Event listeners generate errors while the modal windows are shown.

Similar Questions

• Refresh the parent page while a modal window is open to the APEX 5.

  Does anyone know if there is an easy way to do this in APEX?  Here are more details:

  I have an APEX 5 page with a report that shows orders for a customer.  The user presses a button to open a popup that allows them to add commands to the State.  If we add a firm order the modal pop-up window and the report is refreshed.

  However, I also have an ' Add and add another "button that adds the command to the collection, the report is based on and then deletes fields on the modal to allow another order to be entered."

  The user can see the report in the background, but the controls are not added until they close the modal window.

  Is anyway to update the classic/pages in the background report to give the user a visual indication that an order has been added every time they press 'add and add another '?

  Thank you!

  Hello

  You can create a dynamic action with the following javascript code:

  parent. $('#id_standard_report'). Trigger ('apexrefresh');

  You must assign a static ID to your standard report. Replace "id_standard_report" in the code with your code.

  Sergio

• Getting errors on the 3 Windows updates: 2699988, 270162, 2685939. On the first try error codes were 0 x 80246007 and 0x8007010B

  Getting errors on the 3 Windows updates: 2699988, 270162, 2685939.  On the first try error codes have been 0 x 80246007 for all 3, try subsequent was 0x8007010B.

  Configuration is Windows XP SP3 with MSIE6 (test the system reads old browser).  Any suggestions?

  Original title: get errors on the 3 Windows updates

  Maybe: http://support.microsoft.com/kb/958042

  When you try to install the updates on the Windows Update Web site or the Microsoft Update Web site, you may receive a "0 x 80246007" error code

• Print the modal window

  Hello!

  Is it possible to add a "print" button that allows to print only the current modal window?

  Thank you!

  Found a solution...

  I created a button in the current modal windows with action "Redirect to URL" and the value "javascript:window.print();

  Now I press "print" its apears to only print the modal windows!

  Finally I will 'play' with css ( @media print ) to hide unwanted areas!

  See you soon!

• can not install the latest version of itunes, get the error msg: "the component you are trying to use is on a network unavailable resource."

  Can not install the latest version of iTunes.  Everytime I try I get this error msg: "the component you are trying to use is on a network resource that is unavailable."

  Then I click OK and get this msg: could not find the path C:\users\my name\appdata\local\apple\apple software update\itunes6464.msi.

  I need to sync my new iPad pro and because used to synchronize requires the latest update, I have my laptop but I never have syncd my ipad with this computer and if I try to backup if I agree to erase everything on my device and sync with the laptop.  Of course, I don't want to do what I want to see everything on the NEW ipad from the old version.

  I went through the troubleshooting and found a solution, but when I had finished making all this trouble report said, there was a pesky itunes shortcut file on the left and I can not delete this shortcut, regardless of how many times I try.  If I can't remove it, the Installation will be terminated.  How can I delete this file?

  For general advice, see troubleshooting problems with iTunes for Windows updates. Start by Missing MSI errors .

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• All locations of the project window are white - label color does not

  All locations in the project window are white! No color - not default same mango. Does not meet the new colors. The timeline is colorful. (Mac 8 core Pro Tour, Nvida 680 GFX, 16 G of ram etc..) I see nowhere else.

  DOH!

  The label box was not checked in the options of meta data. Now I feel stupid.

  However - Adobe - why make a separate column of the label? -Why don't you just give us the option instead, or more, to paint the tray of mango by default. I like mangos but not all the time.

• While using Windows Media Gallery, error message, the component you are trying to use is on a network resource that is unavaialble

  I used to get jump up while working on my system. Details of the pop up windows:

  «Pl waiting windows configures media gallery»

  If I have to cancel this once again it displays:

  "The feature you are trying to use is on a network resource that is unavaialble.

  -Click ok to try again or enter a different path to the folder that contains the installationpackage M.G. modulesX64.msi in the box below

  -c:\users\admin~1\appdata\local\temp\{2ACCE2B2-D3EF-430A-B766-8EA930489CCE}\{DD88F979-FA58-41AC-980-A6E1A82B61D9}\

  -An installation package for the product M.G. cannot be found. Try the installation again using a copy valid x 64 MSI installation package M.G. merge module.

  I already uninstalled the program Gallery media still the problem persists.

  Pl help.

  original title: how to block pop-ups «pl waiting windows configures media gallery»

  Hi Rajazc,

  It seems that the location that the software will search in the installation file has changed or disappeared. You can follow this path that he needs? When you re-installed, did you use the same exact path? You completely uninstall before you try to reinstall? Try this: uninstall the software, do a clean boot, and then reinstall making sure that you set in a different way.

  Here is a link that has a portico on the issue that you are running in (just another program) to watch what you deal with:

  http://support.Microsoft.com/kb/828376
  hope this helps,
  B Eddie

• Get the 'Message (unacceptable)' error while activating my Windows 7 product key.

  * Original title: product key

  When I want to active my windows 7 it ask me to enter the product key, but I can not enter the number (0) and I have this

  Message (unacceptable character)
  

  I've updated since an activated copy of Windows 7 or Windows 8/8.1, then I decided to reinstall using either the. ISO file, reset the player's PC or recovery, but I am prompted to enter a product key:

  Click on that later

  Windows 10 automatically reactivates in the coming days.

  Things you should know:

  • A Windows 7 or Windows 8/8.1 product key cannot Activate Windows 10. Windows 10 uses its own unique product key.
    
  • By default, the versions of Windows 10 are previously entered, which means, you don't have to enter a product key and should not be invited to enter one as long as you upgraded a activated License of Windows 7 or Windows 8 or 8.1 of Windows or Windows 10 Preview build.
     
  • If you perform a clean installation on the first attempt, you will have to start from an activated installation of Windows 7 or Windows 8/8.1.
    
  • If you are prompted to enter a product key, click on Do this later and give it a few days, 10 Windows will be activated automatically.
    
  • Activation servers may be overwhelmed at the time due to the volume of updates, so give it some time if you get an error of the type ()0XC004E003, 0x8007000D, 0x8007232b or 0x8007007B) 10 Windows will activate eventually as long as you upgrade by using the appropriate method.
    
  • It does not need to know your product key Windows 10, read "Understanding Product Activation in Windows 10:

  Figure 10 Windows Product Activation:

  In previous versions of Windows, when you have installed a version upgrade of Windows, if you want to reinstall the upgrade version, you had first reinstall permissible version where you upgraded, reactivate, then upgrade again and reactivate again.

  With Windows 10, this is no longer the case. Once you have upgraded to Windows 10 and enable, you can simply create a bootable copy on DVD or USB and reinstall all Windows 10 without having to reinstall the release candidate and it automatically reactivates.

  Quote:

  "10 keys Windows handles differently. When you migrate to Windows 10 via Windows Update to 8.1 Windows or Windows 7, the process saves your eligible hardware and OS computer with a Microsoft Product Activation Server. The device is considered as a device Windows 10.

  "Thereafter every time you re-install (or clean install) installation check in with these servers, concludes the unique installation ID and product validation.

  ZigZag3143 (MS - MVP)

  To learn more:

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-activate-and-resolve-common-product-key/33f31475-93B3-4D1C-812F-4b21fbd807a7

• Error code ' 57th unknown error "while the installation of security update KB2284695 & KB2289163 for Office 2003".

  Original title: what is 57F error code when updating windows do not install updates?

  Windows Update not installing the update of security KB2284695 & KB2289163.  Error code '57th unknown error. "  Any suggestions?  Thanks in advance.

  Hi newcomer8,

  1. have you tried to install the updates manually.

  Method 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  You can try to download and install the updates manually and see if it works well or not.

  Links:

  Update of security for Microsoft Office 2003 (KB2289163)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=976857e9-77fc-4667-88ca-7637e57536cd&displaylang=en

  Update of security for Microsoft Office Publisher 2003 (KB2284695)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=e600de65-3e9d-4e37-8906-8b7091ff523e&displaylang=en

  Also check out the following link and try the steps by Pradeep Soni on Thursday, April 23, 2009 15:41 and check if it helps.

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/691a9c92-624e-4BB9-847a-fe9fc6a51394

  Important: The above link contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "Get an error" "disable the native windows power management" when installing the APC's PowerChute Software.

  Original title: native Windows power management?

  I'm trying to activate my ups (APC Back-UPS1500) on my new xp windows desktop pc. APC told me to install the PowerChute Software and drivers. Installation stops with a statement of "disable the native windows power management. I can't understand how/where to do.

  Hi Patrick,

  Welcome to the Microsoft Community and thanks for posting the question. According to the description, you get an error during the installation of software provided by APC.

  Try these steps and check:

  Method 1:

  I suggest to create a system restore point before you perform the steps listed in method 2:

  Sometimes, a new program can make your computer behaves unpredictably, and uninstalling the program does not help. Windows XP provides a feature called that can help the system restore. You can use system restore to select a time when your computer is working as you wish.

  Visit this link and try the steps to create a system restore point:

  How to set a system restore point in Windows XP

  http://support.Microsoft.com/kb/948247

  Method 2:

  Can the service of Windows power. Try:

  1. click Start and click Run.

  2. type Services.msc in the box and click on enter.

  3. scroll down until you find the power, right-click on it and select Properties.

  4. in the menu drop-down select Diasbled. OK and quit Services.

  5. now try to install the PowerChute Software and check.

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• Error in the active window

  Hello

  I have a question about the active window in Adobe Muse. In a group of 'virtual' image, in this case called porfolio20.jpg (see screenshot), there are several images/thumbnails with a normal status. However, for the group itself, I get a warning (red circle on the screenshot). Can I just ignore this warning, because the images themselves don't cause any problems?

  

  Mouse over the icon to see what the error is... the most common is that the asset has been upsized and this error can be ignored because it is caused by sloppy coding

  

• Is there a way to clear all event listeners, to stop all the video clips, etc.?

  Is there a syntax for that?

  I have a movie that has 15 images. Each image has integrated video clips in video clips, tons of entertainment and event listeners. None is needed except when they are on the scene, on the frame. However, the animations continue even when the frame is left.

  For example, I have a framework that shows a rendered animation dynamically the leaves that fall from the tree. When the frame is left, the leaves continue to decline.

  There are many cases of this kind of thing happens.

  
  Ideally, I'd like to just be able to erase everything when a new image is loaded, since no animations or postponed event from one image to the other listeners.

  
  Is it possible to do it without the thousands of lines of code it would take to manually remove all single animation and event listener and sounds, etc., of the scene?

  Thank you very much!

  Amber

  You must do it manually.

  or, you can convert each image into a swf file.  load each swf when necessary and, if you're publishing to fp 10 +, you can apply unloadAndStop() to kill all the flows in the SWF loaded and ready these assets to gc.

• Error, while the creation and execution of stored procedure

  Hello

  I'm creating a procedure stored and discovered during the compilation and execution of procedure.

  CREATE OR REPLACE PROCEDURE procTEST
  AS
  BEGIN
  WITH
  AS Report1
  (
  SELECT * FROM Employee
  )

  SELECT * FROM REPORT1

  END;
  /

  ERROR when compiling

  -------------------------------

  PROCTEST update procedure

  Errors: Newspaper the compiler check

  ERROR when executing

  ---------------------------------

  PROCTEST update procedure

  Errors: Newspaper the compiler check
  Error from line: 15 command.
  EXEC procTEST
  Error report-
  ORA-06550: line 1, column 7:
  PLS-00905: object SYSTEM. PROCTEST is not valid
  ORA-06550: line 1, column 7:
  PL/SQL: Statement ignored
  06550 00000 - "line %s, column % s:\n%s".
  * Cause: Usually a PL/SQL compilation error.
  * Action:

  Hello

  user13360241 wrote:

  I want to insert values into the table tmpemployees.

  Insert into tmpemployees

  Select * from Report1

  CREATE OR REPLACE PROCEDURE procTEST
  AS
  BEGIN
  WITH
  AS Report1
  (
  SELECT * FROM Employee
  )

  Insert into tmpemployees

  SELECT * FROM REPORT1

  END;
  /

  I see.  Then, there is no need to use the PL/SQL.  All you need is:

  INSERT INTO tempemployees

  SELECT *.

  OF REPORT1.

  (assuming that the columns match Report1 tempemployees... It is best to explicitly list the individual columns, like this:

  INSERT INTO tempemployees (employyee_id, first_name,...)

  SELECT (col_1, col_2,...)

  OF REPORT1.

  )

  If you need to use the PL/SQL for a reason, you could use the exact same INSERT statement in PL/SQL:

  CREATE OR REPLACE PROCEDURE proctest

  AS

  BEGIN

  INSERT INTO tempemployees (employyee_id, first_name,...)

  SELECT (col_1, col_2,...)

  OF REPORT1.

  END proctest;

  /

  DISPLAY ERRORS

• Gettings error message: error in the non paged area error page

  I have a Satellite M45-S265 with Windows XP. Even if I moved abroad and then went home, I haven't lost my recovery CD!

  However, my computer went to compensation under a policy of service from Best Buy. She returned with a new card, new keyboard, new drive hard (in white), new CD player and I don't know what to another new. I guess the 3rd global environment was pretty hard on this (dust, moisture, heat) so it takes a lot of new things.

  Now, when I use the recovery CD, it seems to do everything OK, until he asks me my settings. After settings, it tells me it will reboot and it does, and when she returns to the top he gets a blue screen with the error 'page in the non paged area failure. "

  Technical information of the blue screen:

  Stop: 0 x 00000050 (0xA9A35A00, 0 x 00000000, 0 x 00000000, 0x805C52BA)

  win29a51.sys address A9A35A00, at A9A35A00, date stamp 00000000

  When I restart, the windows looks like it will start up. Can I get a pretty little box of windows with the message "the system is not fully installed. Please run Setup again. »

  I wonder if the restore CD will not work because there is perhaps now another brand of hard drive on CD here, or different, different determinants?

  Best Buy has something wrong or I have to take the computer to them?

  Original internet research indicates the problem could be faulty RAM?

  What should I do?

  Thank you
  Susan

  Hi Susan,.

  Looks clearly like a related problem of RAM. I recommend to put the machine to a technician and allow it to check the RAM memory, because this fault of page errors occur when something was written into RAM and then if the operating system asks files block in the module memory may not be accessible which causes the above error.

  Greetings

• Two of the application window are enabled at the same time when I click on an icon in the taskbar of an application.

  When I open a window of the application in Windows 7, and then press the keyboard windows, if I click on an icon in the taskbar to another window, I find that each of the two windows is activated. I use Spy ++ to monitor both windows messages in this scenario and esteem that both windows obtained the WM_ACTIVATE message. If I right click on an icon in the task bar of the window of the second just after press the windows key, I find that the first window will activate everything first and soon to be switched off.  What is a feature of the taskbar of Windows 7 or a bug in Windows 7?

  Hello

  The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the community of developers in the MSDN (Microsoft Developer Network) following the link:

  http://social.msdn.Microsoft.com/forums/en-us/categories