Event Viewer: the initializer for type for 'advancedsetttings' threw an exception

Similar Questions

• System.TypeInitializationException: The initializer for type for 'NationalInstruments.UI.Internal.WaveformPlotElement' threw an exception.

  Hello group

  I currently have a problem with an application I developed. I use VS2008 and c# with Measurement Studio Version 8.6.0.189. My application uses OR controls to display the tables and diagrams.

  I tested my application on my desktop and on other computers and virtual machines (including Windows 7 Beta, XP) and it works as I expected. For the installer, I used the normal generation of Microsoft tool in VS 2008.

  Now, my client has problem to run the application on a laptop with windows XP. The Setup works very well and install .NET 2.0 and my request as I expected. The customer can start the app, but when the program gets to a point where I intern create and initialize the elements of an WaveformGraph, I get the following exception:

  System.TypeInitializationException: The initializer for type for 'NationalInstruments.UI.Internal.WaveformPlotElement' threw an exception. ---> System.TypeInitializationException: the initializer for type for 'NationalInstruments.PrecisionTimeSpan' threw an exception. ---> System.IO.FileLoadException: could not load file or assembly 'NationalInstruments.Common.Native, Version = 8.6.35.131, Culture = neutral, PublicKeyToken = 18cbae0f9955702a' or one of its dependencies. Sharp application konnte nicht gestartet werden, weil Anwenungskonfiguration kreatin ist nicht die. Zur Problembehebung should die neu installieren application. (Exception from HRESULT: 0x800736B1)
  File name: 'NationalInstruments.Common.Native, Version = 8.6.35.131, Culture = neutral, PublicKeyToken = 18cbae0f9955702a'---> System.Runtime.InteropServices.COMException (0x800736B1): sharp application konnte nicht gestartet werden, weil Anwenungskonfiguration kreatin ist nicht die. Zur Problembehebung should die neu installieren application. (Exception from HRESULT: 0x800736B1)
  to NationalInstruments.PrecisionTimeSpan... ctor (Int64, UInt64 fractionalSecondTicks wholeSeconds)
  to NationalInstruments.PrecisionTimeSpan... cctor()

  -End of the exception stack trace internal-
  NationalInstruments.PrecisionTimeSpan.FromSeconds (Double value)
  to NationalInstruments.UI.Internal.WaveformPlotElement... cctor()

  -End of the exception stack trace internal-
  to NationalInstruments.UI.Internal.WaveformPlotElement... ctor (Object obj)
  at NationalInstruments.UI.WaveformPlot.CreateElement)
  to NationalInstruments.UI.ControlEntity... ctor()
  to NationalInstruments.UI.Plot... ctor()
  to NationalInstruments.UI.XYPlot... ctor()
  to NationalInstruments.UI.WaveformPlot... ctor()
  to MosesVideo.SchreiberControl... ctor (AnzeigeObjekte obj, index Int32, Globals g)
  at MosesVideo.MainWindow.CreateNewAnzeigeObjekt (Int32 & iObjektIndex, iType Int32, Boolean bReload)
  at MosesVideo.MainWindow.MainWindow_MouseUp (Object sender, MouseEventArgs e)
  at System.Windows.Forms.Control.OnMouseUp (MouseEventArgs e)
  at System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons, Int32 clicks button)
  at System.Windows.Forms.Control.WndProc (Message & m)
  at System.Windows.Forms.ScrollableControl.WndProc (Message & m)
  at System.Windows.Forms.ContainerControl.WndProc (Message & m)
  at System.Windows.Forms.Form.WndProc (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  This exception is thown, when I run the line

  plot [i] = new NationalInstruments.UI.WaveformPlot ();

  The same runns code on each machine, I have access to.

  What happens here?

  Concerning

  Stephan Gerhards

  Hi all

  Finally I found a solution. I had to manually add the "Microsoft_VC90_CRT.msm" and the MICROSOFT_VC80_CRT to my Installer and then it also works on all of my client.

  Concerning

  Stephan Gerhards

• My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

  My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

  Right-click on the header at the top of the list of messages and select from the list of options.

• I have an error in my event viewer: the fault bucket + 45216 0xD1_athr, type the name of the event 0: BlueScreen. Can someone please explain to me how to solve this problem.

  I have an error in my event viewer: the fault bucket + 45216 0xD1_athr, type the name of the event 0: BlueScreen

  Can someone please explain to me how to solve this problem. My computer shuts down whenever I get on the internet. I need some answers please.

  You have a problem with a driver Atheros.

  It could be the network card is bad or the driver is damaged.

  If it is a wireless card, try to connect to the router with an ethernet cable. See if you can get an updated driver from the computer manufacturer's website.

  http://msdn.Microsoft.com/en-us/library/ff560244 (v = VS. 85) .aspx

• How to view the settings for the sequence (info that is displayed when you open the first sequence)?

  Hi, I would like to ask how to view the current settings of the sequence, I'm already working the same information that is displayed when you open for the first time a new sequence

  for example.

  General

  Editing mode: QuickTime DV PAL

  Time Base: 25.00fps

  Video settings

  Image size: 720: 576v (1.4587)

  Frame rate: 25.00 FPS

  Format of the pixels: PAL D1/DV widescreen 16:9 (1.4587)

  Fields: Bottom field first

  Audio settings

  Sample rate: 48000 samples/second

  Default sequence

  Total of the video tracks: 3

  Master the track type: stereo

  Audio tracks:

  Audio 1: Standard

  Audio 2: Standard

  Audio 3: Standard

  I forgot what setting I chose for my current sequence and tried to look under project settings , as well as the sequence settings

  but do not show the news that you see when you open a new sequence for the first time, especially if the edit mode is PAL or NTSC etc.

  How can I find this information which my current sequence is on?

  Thank you

  Sequence / sequence of setting you will find all the information.

  If his pal, you're on 25 or 50 fps.

  the rest is ntsc.

• Event inside the loop 'for' confusion

  Hi all

  I have an event inside a N = 2 for the loop, which generates an array of 2 elements (auto-index mode). The first value is a first event, the second of the second round. The events are the mouse clicks on a front panel with many buttons control.

  Am I able to access the i counter inside the front loop of 2 elements output table? He does not appear.

  Maybe I want just 2 events in the order I should put two copies of this event in a sequence of 2 image... but it creates the need to set up the event twice... a concern, because it contains many possible sources.

  Ive tried everything in loops, by the way I like a local variable, tunnels, shift... registers but I don't seem to be able to access I have during the loop.

  Can anyone suggest a method or a better structure/approach for this issue.

  In any case, it seems that the program is blocked waiting for the second round, so I can't do anything with the value anyway?

  I want to take action after the first test and before that I'm waiting for the second event.

  Thank you

  Carloman

  OK, you're much too complicated things dong.

  • Use a unique event for all low Boolean mice, then use the ctrlref of output event to detect only one. For Boolean values, you can use an array of Boolean instead of all these individual buttons.
  • Don't do the "table of cluster... unbundle" songs and dances. It's just ridiculous! 'array Index' is sufficient.
  • You need an event for the stop button.
  • The structure of your outdoor sequence has no purpose.
  • The coloring is registered with VI, no need to recolor with each race.
  • Do not reproduce any of this code. Your internal matter differs only in a constant of the diagram, it's everything that belongs inside the case. The "subset of table to replace" belongs to the outside.
  • Now, simply do the processing in a new event and ignore if the State isn't fair. Modify if needed.

• view the code for two different pages at a time

  HI - in other editors I've used I've always been able to implement the code for two different pages so that I can watch side by side to compare. I can't find a way to do this in Dreamweaver. Anyone know if this is possible?
  Thank you

  Found. Always after asking for help! This is the "cascade" in the Windows menu.
  Thanks anyway!

• Event Viewer: the newspaper of the clearing system

  I want to erase all my system logs to remove old errors corrected headlines.

  In any case, I have cleared all the logs in the event viewer, but the administrative events has still some OLD critical errors in it.  It seems there are two SOURCEs, I can't find logs for:

  1 Dhcp-Client
  2 PrintService

  Are they in the observer of events somewhere?
  If not, how can I make them disappear.

  It's OK, I thought about it.

• How to add events at the bean of type Date

  Hello
  
  I created two date items - start date and end date.
  
  now, I want to add the event in these points?
  
  How can I add event at the bean type date?
  
  Pls help...
  
  Thank you
  Amit

  Hello

  Try code below

  Import oracle.cabo.ui.action.FirePartialAction;

  FireAction firePartialAction = new FirePartialAction ("updatedate");
  StartDateBean.setAttributeValue (PRIMARY_CLIENT_ACTION_ATTR, firePartialAction);

  Thank you
  Pratap

• When adding new events to the calendar for Thunderbird lighting plugin, the application refreshes and removes recently added events.

  I have three calendars ICS (network) in lightning. All have offline support checked in the settings.
  Yesterday I opened TB and lightning to find all events that I had entered disappeared (there for a split second then it regenerated).

  My Calendars online are in the electronics/Pim 'Horde' mail system provided by my Web host.

  I tried several tests and disabled the Auto-Refresh feature (a solution proposed by another article), however the entries created in lightning disappear spontaneously. However, these events that I create in the online version of the calendar persist. So it would seem that they never actually get downloaded (synchronized) in the online master calendar.

  I use ICS as the online master calendar access method.

  Any help solving this would be appreciated, otherwise I'll have to remove the light and find a replacement.

  Concerning

  Adam

  ICS is a file format and are not really suitable for a network schedule. Apple cannot do anything more than read only works on their Ical calendars and for reading writing recommend CalDav. Horde maybe has a similar problem.

  Their web site, I noticed that they support CalDav. This is a calendar designed from scratch like this network protocol.

  This seems to be instructions on how to locate the URL caldav in the Horde, but knowing nothing about the product I don't really know. http://wiki.Horde.org/CalDAV

• How can I color code my events on the calendar for Windows 8 App?

  Hello

  I'm trying to color code the events on my calendar app, but I can't understand it. In my case, it's for my class so I can tell by the color automatically. Thank you

  Hi Xapitapalitos,

  I see that you want on the application of the calendar of events to color code. I'll help you with this problem.

  Let us, follow these steps to check the status.

  1 - Open calendar app, press the windows key + C.

  2 - Click settings and click on options.

  Refer to this article.

  Calendar: frequently asked questions: http://windows.microsoft.com/en-US/windows-8/calendar-faq

  Hope the above information is helpful. If you have any question back to us, we are happy to help you.

  Thank you.

• is this allowed? materialized view the log for the remote database (via db lin

  : Hi guys.
  
  try to do
  
  create materialized view log on user@xxx with sequence, rowid (col1, col2), including the new values;
  
  
  where xxx is a remote db link
  ------
  
  had this error
  
  ORA-00949 - illegal reference to the remote database
  
  Google but do not know whelther this error is an internal error or not allowed for mviews characteristic.
  
  help pleaase!
  
  Rgds,
  Noob

  do you mean that the materialized log should be created in the same location where the main table

  YES. Of course, it must be there! Any update to the main table should also update the MV log that is created against it!

  Hemant K Collette

• view the diver for my hp laptop 15 - r074TU

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=in&DLC=en&sw_lang=&product=7308... I downloaded this driver for my win7 64bbit, but when I try to install it shows that my computer does not meet the minimum requirements. where to find this graphics driver for my computer laptop 15-r074TU in support of windows 7 ultimate 64-bit

  Hello:

  I would just use the driver directly from Intel...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24245

• View the calls for papers

  I'm content Chair EMP/BI for the Kscope16 Conference in Chicago. I would like to publish a call for contributions in the concerned areas.

  It of nothing that specifically prohibits this as far as I can see in the rules, FAQ or rules of conduct documents. The moderators have no problem with that? I don't really want to have my deleted messages simultaneously in eight areas and become a topic of conversation in the mod space...

  I do not think that a post from me on OTN involves any kind of support of the Oracle, but for what is interesting (and for those who don't know) Kscope is a 100% Oracle conference that enjoys the support of several "branches" of Oracle, OTN no less.

  I post here in order to achieve the OTN community managers (moniquevdb-Oracle, Laura Ramsey-Oracle and so on) for an 'official' answer and not to interview all the members, and very respectfully, I ask that someone don't not corresponding to the old description that wants to offer an opinion in a separate discussion. I'm sure that won't work.

  Thanks for your time.

  Product areas would not be the right place for this, but we can probably find a reasonable way to publish a call for contributions in a general area. I added you as a friend if you can me message directly. In the meantime I'll connect with Hocinebelatreche-Oracle and Oracle-valeriesimpson to make a recommendation.

• view the settings for windows?

  My Windows screen changed by me, I'm sure.  However, it is not fair!  Could you tell me the default settings if I change it back?  Restoring to the previous... does not work.

  http://answers.Yahoo.com/question/index?QID=20080912171907AA0wP10

  http://msnblog.MSN.com/blogpost.aspx?post=00000065-0000-0000-319e-140000000000&_p=30ab996c-0880-4ceb-90d1-e4b371254555

  Read these, it might be because MSN has changed their homepage web design.

  You can flip through the preferences and see if you can go back to the old homepage