every click goes into real tool pen tool

Similar Questions

• Cannot click successfully to many tools/options in InDesign CS6

  I am a member of creative cloud and I have a problem with InDesign CS6.  Outwardly, it seems to install fine, but when I start it up I can't click on a large number of options.  I can create a new document, and I can add a text box.  However, when I click to change all elements of the police, nothing happens.  It's like I'm not really clicking.  I am able to click and use the pen and text tool, but not the tool arrow travel.  Interestingly, if I use the hotkey (V), I am able to move arrow.  Also, I can see the pages palette, but I can't click on any aspect of it successfully.  Similarly, I can view the palette layers, but I can't click on the triangle next to layer 1 to open its contents.    I am convinced that it is not a problem with my mouse because I can always click on the type tool successfully, and also because all my other programs are functioning normally.

  I am a frequent user of Illustrator CS6 and Photoshop CS6, which work perfectly.  I downloaded all updates for InDesign.  I use a PC with Windows 7 64 bit and 6 MB of RAM.

  Thanks for any advice you can offer,-Kate

  There are a few problems with high DPI and theme Aero on Windows 7 with InDesign.

  Click on the link: -.

  http://helpx.Adobe.com/InDesign/KB/InDesign-tools-panels-Don ' t - respond.html

  I hope this helps.

• About every hour, without any warning or action by me, my PC suddenly goes into Shut Down and restart immediately.

  About every hour, without any warning or action by me, my PC suddenly goes into Shut Down and restart immediately.  Everything is as I left it.  But all this takes time.

  original title: How can I stop my PC restarted on every hour.

  still having problems?

• I can't open the speech recognition in Word 2003 - I click on Word under Tools, nothing helps. What's wrong?

  I can't open the speech recognition in Word 2003 - I click on Word under Tools, nothing helps.  What's wrong?  If I go to the Control Panel, under regional and Language Options, the button is grayed.

  Hello Stephen,

  Please see the following articles:

  How to install and configure speech recognition and handwriting in Word 2003

  Using speech recognition for the first time in the Office

  Frequently asked questions about speech recognition for office functionality

  How to install and configure speech recognition in Windows XP

  How to use speech recognition in Windows XP

• How can 13 Photoshop elements in Expert mode, I stop a control panel appeared at the bottom of every time I pass the tools?

  In Photoshop elements 13, in Expert mode, how can I stop a control panel appeared at the bottom of every time I pass the tools?  I'm just trying to compose by switching between the zoom and hand tool tool. Whenever I pass, a control panel appears. I have to manually hide the Panel each time. Which seriously disrupts the flow of what should be a task simple, zoom / move. I don't remember this annoying behavior in my previous versions of the software...  Can someone please advise me how I can stop? I thank very you much in advance!

  Lingyaiyai wrote:

  In Photoshop elements 13, in Expert mode, how can I stop a control panel appeared at the bottom of every time I pass the tools?  I'm just trying to compose by switching between the zoom and hand tool tool. Whenever I pass, a control panel appears. I have to manually hide the Panel each time. Which seriously disrupts the flow of what should be a task simple, zoom / move. I don't remember this annoying behavior in my previous versions of the software...  Can someone please advise me how I can stop? I thank very you much in advance!

  What you see is the tool options palette.

  The interface has been changed from 11 items on.

  It seems logical to view options when a new tool is selected. If you don't want to, look at the upper right of the tool options palette. You can open a menu in which you remove the check mark in the box to automatically display the tools/options.

  When you're accustomed to older versions of elements, it is a good idea to read the section on areas of work and the environment, in particular on the bins.

  Photoshop elements help | Photoshop elements help

• In my old photoshop, I clicked on the rectangle tool and then left click on image free transform and tilt.  my new photoshop does not allow this.  I tried edit - free transform, but it does not have to be.  What should I do?

  In my old photoshop, I clicked on the rectangle tool and then left click on image free transform and tilt.  My new photoshop does not allow this, I tried edit - free transform as well, and this is also not allowed.  What should I do?

  Thank you Trevor.  Discovered that I tried to tilt the bottom and not a new layer.  All sorted now.

• Have installed Acrobat Pro. I want to create a document of my scanner, when I click on 'File' or 'Tools', of "create" - it does not give me the ability to create a PDF from my scanner. " It gives me the ability to create a PDF from a document online

  Have installed Acrobat Pro. I want to scan a document and create a pdf file. When I click on 'File' or 'Tools' and then click on 'Create', it does not give me an option 'Create PDF from a Scanner. It gives me the opportunity to convert web pages or documents already on my computer in PDF format. I tried through Adobe Reader as well as Acrobot have installed and uninstalled the toolbar a few times. Thoughts?

  Hi all

  For me, it seems that you use Adobe Acrobat Reader, if this is the case, please try use Acrobat Reader cannot create documents from a scanner.

  Concerning

  Utkarsh

• Why my cursor does not change when I click on the selection tool?

  When I open any file, the object - in this case, an image - is already selected.

  
  

  I want to enlarge the image, so I click the buttons to do that. Normally, I would choose 125% or 150%, but menu drop-down does not open. I tried clicking on the arrow up/down of the arrow buttons. Nothing happened. I tried a double-tap on the numbers to enter a percentage; small blue horizontal bars appear on either side of the default value '100' as if the machine tries to highlight the number, but can't.

  
  

  I click on the text tool, get the I-beam and can click in a text box.
  

  
  

  After all this, I click on the selection tool. Nothing happens. My cursor is an i-beam. I can't change it to something else.

  
  

  I have installed and uninstalled InDesign several times to correct this and related problems.

  1. Installed since the problem of media - original - met - uninstalled and reinstalled disks - unresolved problem.
  2. Installation files downloaded from Adobe. Same result.
  3. Uninstalled and reinstalled InDesign only. Still no go.
  4. Updates computer back to factory settings, created Office for CS4 installation, point installed CS4 from there. Still no go.

  
  

  Is it possible that there is some sort of incompatibility between CS4 and my computer? It's a new laptop Acer Travelmate (a week). Obtained from TigerDirect, a trustworthy trader.

  
  

  My OS is Windows 7, but this should not be a problem; CS4 works fine with Windows 7 on another computer in my house (which, unfortunately, is busy most of the time, or I would use only).

  
  

  Any ideas at all?

  
  

  Help, please. I have a deadline for the upcoming project and really need this computer to work.

  
  

  Thank you thank you thank you.
  

  Set your font size in the o/s to 100% or to disable the aero theme.

• 64 bit Vista crashes when the system goes into Sleep Mode. Have cold start. Simultaneous began with the June 8 patches.

  This problem started a week ago, say at the time of the June 8 fix release. I think the relevant in case the log message is 'detected bad event COM + a system code back during internal processing. HRESULT is C 8007043 line 45 of d:\longhorn\com\Complus\src\events\tier1\eventssystemobj.epp. Error report, please contact Ms Product Support Services. "However, when I contacted MS, they would not help without paying the fees because it was an OEM installation. The system remains upward after the stabilization of the system going on in SafeMode after cold start, close and then switch to normal mode. However, once launched, it seem (ed) as the hard drive light was permanently. I did a restore to June 8, most early I could continue.  The hard drive worked without interruption after that.  I did a forced sleep and restart and the system froze again. With this in mind, I wonder if .NET patches that were released were running somehow at the time of sleep and that he could not recover.  OR, during sleep, the system was made of updates and the system has been disabled, corrupting the updates.  I looked at the Windows Update settings and it has been set to automatically install updates.  It is quite possible that the user did not know and did not recognize there are pending updates.  Maybe updates were not correctly packed in order to manage a system from going into Sleep Mode, while they were installing. In any case, any who would provide help on how to identify the problem and fix it.  There may be registry entries need to be corrected?

  Duane G. Leet, Ph. d. 45 years of experience in technology

  Microsoft support has provided a solution.  Here is the procedure:
   
  We can run reset Windows Update Tool and system update tool to detect incorrect manifests, files or data from the registry. Please follow the steps below.
   
  Step 1: Launch the tool to reset Windows Update and the update of the system tool
  ====================================
  1 download and run reset Windows Update Tool from the link below:
   
  http://go.Microsoft.com/?linkid=9665683
   
  2 download and run the update tool of the system from the link below depending on the Type of system:
   
  Update for Windows Vista 32-bit system tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b4d90b06-c27d-4483-bc1f-04d43fa7b293&displaylang=en
   
  Update for Windows Vista 64-bit system tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=f6f353c0-d00e-43e7-97EF-0feefc7ff064&displaylang=en
   
  Note: It may take an hour or more time to detect and replace the erroneous data, please be patient. When it is finished, restart the computer and reinstall Windows Vista SP2.
   
  If Windows Vista SP2 can not always be installed, I suggest to download the stand-alone Installer and install it in clean boot Mode.
   
  Step 2: Download the installer of Windows Vista SP2 Standalone
  ===========================================
  1 download the installer of Windows Vista SP2 Standalone from the link below depending on the Type of system:
   
  Windows Vista Service Pack 2 - version independent ALL languages for Windows Vista 32 bit (KB948465) (475,5 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d&displaylang=en
   
  Windows Vista Service Pack 2 - version independent ALL languages for Windows Vista 64 bit (KB948465) (745,2 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3&displaylang=en
   
   
  Step 3: Install Windows Vista SP2 in clean boot Mode
  =========================================
  Please disable all startup items and services of third parties at boot to avoid conflict when installing Windows Vista SP2.
   
  1. click on 'Start', type: MSCONFIG in the search box and press ENTER.
   
  Note: Click 'Continue' if the "User Account Control" window appears.
   
  2. click on 'Services', check "Hide all Microsoft Services" and click on 'Disable All' (if it's not gray).
  3. click on 'Start', click 'Disable all', click 'OK' and restart the computer.
   
  Note: Disable temporarily the startup group only prevents the start up programs from loading at startup. This should not affect the system or other programs. We can manually run these programs later.
   
  4. double-click the downloaded standalone installer and follow the instructions to install Windows Vista SP2.
   
  To restore the computer to a Normal startup, repeat step 1 above. Then click "Normal startup" in the general tab, click on "OK" and restart the computer.
   
  If there are any questions or concerns, feel free to let me know. It is my pleasure to be useful.

  +++++++++++++++++++++++++++++++++++++++
  The cause was not determined, but evidence tends to a disturbance in the download or installation process, with one of the errors in the event log is an error in checksum on one of the modules. With a large file, 745 meg, the mean time to failure on a LAN network is probably shorter than the download time.  The installation process was probably longer than the time that the system has increased...  Corrective actions for Microsoft could include more small download / install, not allowing an automatic installation for automatic download over a certain size, or deal with the best controls during installation to intercept the checksum error.  Duane G. Leet, Ph. d. 45 years of experience in technology

• I had this problem for a few days now, everytime I turn on my computer, it immediately goes into recovery.

  OK, so I've had this problem for a few days now, everytime I turn on my computer, it immediately goes into recovery.

  It says: "Please choose an option:

  Start the repair Microsoft Windows environment

  Reinstall Windows

  Advanced options

  "Exit and restart the computer"

  I tried all the options, the demand for my keyboard and language input method, and then he says: "use recovery tools that can help solve the problems of Windows startup. Select an operating system to repair. If your operating system isn't listening, click Load Drivers and then install the drivers for your hard drives. »

  There is no operating system listed and when I click Load Drivers, everything that happens is a folder called "System32".

  There is another option, which is "Restore your computer using a system image you created earlier."

  This does not work either.

  So now the second option has two ways to sort, 'Start Windows System Restore' I tried before and now does not work. There are also "Start Full destructive recovery" which I also tried, but there passed the first hurdle, even if she says it should take 30 to 60 minutes.

  Advanced Options I can't use, because I'm not a user of advanced computing. It offers 3 options, although "Chkdsk", "Notepad" and "Command Prompt".

  Even when I put in the Windows 7 disc, it does nothing.

  This has all started after I had a few problems with the Sims 4 and since I changed my keyboard, but I don't know that could be the problem.

  Hello

  Thank you for the update.

  You can use the Bootrec.exe tool in the recovery Windows (WINRE) environment to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)

  • A boot sector

  • A Boot Configuration data (BCD) store

    Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

    
    Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  Let us know the results.

• Portege M400: screen power save after going into power saving mode

  When my monitor goes into power saving mode sometimes, it is not be able to save, I solved this stopping mode energy saving, but it means that I have to drain the battery much faster help!

  I'm sure it's just the screen as I can hit the power button and it seems closed, (it crashes out of sleep mode and I only managed to get it to go into hibernation, once with success (he complains that there there not enough wealth, but there a lot 33 GB of free hard disk! that's a lot to store 2 GB of ram) it is really annoying and I have yet) the laptop over a week!

  Is it possible to find a solution or a way to find what is causeing these issues?

  -
  Garthark

  Hi Oliver

  I read your messages carefully and I'm really a bit confused. As far as I know all the tools pre-installed on each unit of Toshiba are tested. Sleep mode and standby extended too and I can't really understand what is happening in your case.

  The problem may be caused by the use of some third-party software of the part. In my opinion, do not do some experiments with non-Toshiba (driver chipset or display) software, because the software is adapted to the architecture of the unit and equipment.

• When the computer is turned on, it goes into the Windows Boot Manager and it says File\Boot\BCD status: 0x00001c.

  Original title: 0x000014c File: \Boot\BCD

  I have a Dell Latitude E5400 running Vista Basic. Just replaced disc and ran all the diagnosis is good. When I turn on it goes into the Windows Boot Manager and it says File\Boot\BCD status: 0x00001c Info: an error occurred trying to read the boot configuration data. After I ran the diagnostics, he said that all tests passed but and if I wanted to continue with more, I said no and we say "Error" "SYSTEM_ERROR this system is not recognized as a Dell PC support. These diagnostics cannot be run on unsupported systems. "Then there's an OK box. How can I possibly fix. It is laptop of my child and I would like to fix it for him for the school. I have restore Dell custom factory integration CD that came with his laptop. It is said that "it is the Dell CD of CFI restore disc. I really don't want to ruin it. I don't want to run this disk and then was not the driver for it and she will not be able to surf the net or something like that. If anyone has an idea please let me know. Thank you!

  Hi Maddy,

  This problem may occur if the Windows startup files are damaged or missing.

  If your computer has integrated system recovery options, you can try to perform the Startup Repair and check if it helps.

  If it fails, you must have a Windows Vista installation disc and try to parade Startup Repair boot from the disc.

  If the problem persists, try the steps in the article to rebuild BCD, boot from the installation disc.

  Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  Because you replaced the hard drive, you can also get in contact with the Dell helpdesk for assistance.

  Hope the helps of information.

• My printer interrupts communication with my PC when the P.C. goes into Standby Mode. Why?

  Until yesterday, the printer worked fine.  There is no cable or hardware change any.  I am running Windows XP with a jet of Lexmark color printer.

  When I restart the printer works fine.  However when the order goes into standby or hibernation mode, I can print is no longer when the box comes back active.  I get a message that "there is a communication error with the printer.  To correct this problem, a box appears I should go to start/settings/printer and make sure the "Enable bidirectional support" box is checked.  Unfortunately, I can't access the settings of the printer directly from the start menu.

  However, if I click on 'Options' that is displayed when the printer stops and I click "Troubleshooting", I don't see that the "enable bidirectional printer media" is more verified.  If I check, I get a message saying "printer is busy".  If I click on start again I get the same message and the "enable" box is unchecked.  If I hit Cancel, the box is also disabled.  I enter a loop that does not end.

  Any ideas how I can access the printer directly from the start menu settings?  Or how to prevent the impression of no longer communicate with my PC when it goes into sleep mode?

  Thank you much, long in advance for any suggestions you may have.

  It is a Lexmark Z-52.  After 8 hours of trying many different, including the link ideas that you suggested, I have determined that as a result of some recent Microsoft Download, the printer would work only if I used the Dell printing device incorporated in the installation software.  If I tried to install the Lexmark printer from the installation disc, I got the persistent problem.  I deleted all but access to the printer through the installed also origin and everything of fine.

  When I need to change the cartridges and align the jets, I install the Lexmark program, align the print cartridges and then remove the program Lexmark, using the default value of Dell for the printer remaining.

  It works, but why I had a problem, I don't know.

  TNX for the comments!

  Big Phil1

• Automatic update of Vista MS has stopped working 10 August 2016; It goes into an endless search.

  August 9, 2016 is shown in my last update of Windows Vista when Windows Defender - KB915597 (definition 1.225.3489.0) has been installed successfully.  When I opened the Windows Update window it shows "Windows is up to date" from the last control on 09/08/2016.  When I click on "Check for Updates", it goes into the endless search.  I tried different options already listed on this site without success.  I tried a 'system restore' back to August 7, but restored him failed because of an unspecified error.  I removed a number on startup package programs that may have affected the system such as Java and CCleaner, but nothing helped.

  Try the following: KB3185911 to install it manually. Download links:

  http://Wu.krelay.de/en/

  The value "never search for updates' automatic updates and reboot before installation manual.

  Best regards, VZ

• external unknown device after device, hard drive or the printer goes into sleep/hibernation

  I guess that the problem occurs when each device goes into sleep/hibernation because this is happining to only my external hard drive and printer.  All other devices connected by USB have never no problem and will not go to standby or Hibernate. Difficulty I should close down then cold restart without connected device. then after the system is installed and running reconnect the device then it is recognized and works. I tried to just the printer powerdown (cables power and usb for printer peripheral but comp still running while still not recognized after that repower printer and then usb connection get 'unknown device'.)  The only way to obtain a recognized device, DHM or printer is as above full stop and then reconnect.  Any help would be greatly appreciated because it really is a pain and has cost me a printer that I threw out the window, luckly the window was open.  Thanks again for your time and your help very frustrated JK

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  I suggest for the link and try to run the Troubleshooter:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2:

  Try to update the device drivers and check if it helps:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Check out the link for more information:

  Looking for drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/finding-drivers-what-to-do-when-your-hardware-wont-work-with-Windows-Vista

  Method 3:

  I suggest you to disable and re-enable the USB controllers:

  a. click Startand then click run.

  b. type devmgmt.msc, and then click OK. Device Manager opens.

  c. expand Bus USB controllers.
  Note: You need to scroll the list to find this point.

  d. right-click the first USB controller under USB Bus controllersand then click Uninstall to remove it.

  e. Repeat step 4 for each USB controller is listed under Bus USB controllers.

  Note: restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  Let us know if it helps.