every day computer requires me to take to remove the data screen and start Recovery

Similar Questions

• When I turn on my computer it tells me that I need to activate windows. I click on 'YES' it takes me to the activation page and says that Windows is already activated.

  Windows XP Activation loop.

  When I turn on my computer it tells me that I need to activate windows. I click on 'YES' it takes me to the activation page and says that Windows is already activated. All I can do is, click 'OK' and he takes me into a log on screen with my name on it and goes through the same process, as described at the beginning of this statement. I'm in a loop. The only way out is to wipe my hard drive and reload windows new who, within 30 days, it will do no doubt once again. How to do this?
  For 3 years I rebooted my computer. That's why I reloaded it in the first place. I sent this version of Windows XP by Microsoft and have recharged the system at least 4 times in the past 10 or 11 years.

  Ken

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to see link below and check if it helps.

  You are prompted to activate Windows XP or Windows Server 2003 every time that you start the computer:

  http://support.Microsoft.com/kb/312295

  Hope this information is useful.

• By pressing the home button does not take me to the home screen of iOS 9.3.3

  I have recenly updated upgraded to iOS 9.3.3 and I noticed that pressing the home button does not take me to the home screen. The only way to get there is by using the creature of multitasking. (double pressing the home button) Also, some applications seem to freeze if turn my phone off and then turn it back on, or when I access it via the multitasking function. Can someone please help?

  Try a forced reboot. Hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears. You won't lose anything.

  If a force restart does not help, try a system restore. First save your device via iTunes. Also import your photos on your computer and copy all the important data. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

  https://support.Apple.com/en-us/HT201252

• Only, I restored my iPod Touch 4 G. After restoration and reach the homepage, I chose restore backup. Which seems to work but now when I connect the iPod it takes me to the Welcome screen once again. Ideas?

  iPod Touch 4 G, 32 GB, BONE 6.1.6 help with iTunes on a computer Windows 10.

  I restored it and restore selected backup from the Welcome to your new iPod screen. That seems to work, except that it takes back me to the Welcome screen. I tried choose "restore from backup" again, disconnection and reconnection of the iPod, iPod off the coast and back, restart the computer and put the iPod into recovery mode to force it to restore a second time. Whenever I plug in the iPod, it takes me to the Welcome screen. How do I get past the Welcome screen so I can sync the iPod?

  Thanks for your help!

  Try DFU mode, then restore to factory settings / new iPod via iTunes

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  Do not restore sauvegardΘ yet. See if it works when the factory reset. It could be that there is corruption of the backup that is causing the problem.

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• Internet Explorer starts and displays a web page saying the PC is locked and requires £100 to unlock, this page covers the entire screen and if there is no way to get away from this

  our laptop has two users. A user can log in and use internet via internet explorer or firefox. the other uses when connecting.  Internet Explore starts and displays a page web teling them in locked PC requires £100 to unlock, this page covers the entire screen and there is no way to get away from her. You must change user to operate using laptop computer

  * Original title - performance and security in Internet Explorer *.

  Hi Anthony,.
  Your computer is probably infected by a virus. Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
  Brian

• I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

  Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

  I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

  I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

  Any help would be welcome.

  Thank you!

  So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

  Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

  Adobe Lightroom - find moved or missing folders and files

• HI everyone, I paid almost 10 days ago, my supcripcion to plan for all the app elements, and after u date of my latest plan, any program is runing, always appear, your time taking, is late, please by the app with my adobe ID works correctly?

  HI everyone, I paid almost 10 days ago, my supcripcion to plan for all the app elements, and after u date of my latest plan, any program is runing, always appear, your time taking, is late, please by the app with my adobe ID works correctly?

  Photoshop Elements and Premiere Elements are NOT part of the cloud... you buy a serial number, not a subscription, and you enter the serial number during installation

  If you don't want to say things, read below

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• X201T tablet - cannot lock the computer or press ctrl + alt + delete to the Security screen

  Hi guys.

  Sometimes, when the X201T is in the mood not close correctly (and having the light of HARD drive shuts down for an infinite period of time), I find that I can't lock my computer with windows-L.  Also, I can't hit ctrl-alt-del to bring up the Task Manager.  Finally, I can't run any software which shows a UAC prompt, as consent.exe will be backgrounded and I am never offered the chance to hit Yes.

  I believe that it is related to the central issue-that, for one reason or another, the machine won't let something to support the display.  Consent.exe would require half black machine out for the guest screen.  Lock would send you to the lock screen, and Ctrl-Alt-Del displays the Security Menu of Windows.

  I run Windows 7 x 64.

  I installed the operating system from scratch, and I took care to follow the instructions in "installing OS from scratch" Lenovo on their Web site.  Entirely, I realize that the order of the driver and the software install issues with Thinkvantage stuff.

  I do IT doesn't work and I have deployed a lot of laptops Lenovo to employees over the years.  I don't think it's something I am doing wrong, but you never know!

  Just to see if it was a problem with my windows install, I reinstalled Windows yesterday, and I get the same behavior.

  Sorry for all the posts, everyone.  As you can see, I have many questions.

  Finally solved this problem.

  You must make sure that the following Windows 7 hotfix is applied:

  Windows 7 (32-bit, 64-bit) update Module KB976755 (WW) - ThinkPad X 200, X 201 tablet.  You can get this information from the Lenovo support and download site.

  Although the writing on this hotfix does not refer to this problem, this eliminated the problem for me.  I found that Lenovo System Update didn't install the fix.

  My assistance spent a little time with the support of Lenovo to identify this problem.  My understanding is that the fix is included in the preload image Lenvo the camera comes with, so you will get this problem if you do a clean installation of Windows 7 and Lenovo system update does not install the fix.

• How can I remove the Bing screen? I uninstalled Bing, but it appears again every time as I start Mozilla Firefox.

  How can I remove the Bing screen? I uninstalled Bing, but it appears again every time as I start Mozilla Firefox.

  original title: Bing appears when I start firefox

  Hi RowingRVer,

  ·         The issue is only with Firefox?

  ·         What are the States of pop-up message?

  You can try to use Internet Explorer and check to see if the problem still persists.

  If the issue is only with Firefox so you can contact Firefox Support for assistance.

   

  Firefox Support Forum

  http://support.Mozilla.org/en-us/questions

  Let us know the results.

• How to use transfer windows for xp to xp. When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  How to use transfer windows for xp to xp.  When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  Hello, welcome.

  The process is automatic and the maximum transfer rate should be about 20 GB/HR. If the process crashes during that long of a time, it's probably because of something internal rather something you're doing wrong.
  For reference purposes, I included this link. It goes into the details of the migration from XP to Vista (and the basic steps you follow). The instructions are for migrating to Vista via the network, but you can easily follow the steps and choose a different option for your specific installation.
  http://www.windowsnetworking.com/articles_tutorials/migrating-Vista-using-Windows-easy-transfer.html
  For both machines, I recommend you to prepare for the transfer using the following procedure:
  1. click on START > run

  2 type "msconfig" (without the quotes) and press enter

  3. go to the "Startup" tab and uncheck all the entries displayed

  4. click on 'Apply' at the bottom right

  DO NOT RESTART YOUR COMPUTER AGAIN

  5. click on START > run

  6. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.

  7. type chkdsk /r and press enter

  8 allow the system to attempt disassembly of the volume

  9. allow the system to plan restarting

  10. restart your computer

  11 let checkdisk analyze the file system on your hard drive

  12. Once completed, perform the same steps on the other machine

  13. Once completed, repeat the transfer

  
  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lost password: I recently had to do a restore to factory on my computer dell laptop. It went well until he took me to the login screen and I entered my password is not working

  I recently had to do a restore to factory on my computer dell laptop. It went well until he took me to the login screen and I entered my password is not working. I can't get past this login screen. I have seen a lot of messages that say to insert the disc of vista and re - install. I tried to do, and nothing happened when I put the disc.

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

  See you soon.

  Mick Murphy - Microsoft partner

• When turning on my computer always error message "drive: c / on the Neurofibrillaire degeneration and is currupted.__How can I solve this problem?

  When turning on my computer always error message "drive: c / on the Neurofibrillaire degeneration and is currupted.
  suggest how to check the disc I have to press a key before 6 second, try that, but nothing is coming.

  How can I solve this problem?

  http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html

  See if help above.

  See you soon.

  Mick Murphy - Microsoft partner

• I would like to know if there is any way I can remove the 32-bit and keep the 64-bit without harming my computer

  I ran windows 7 installation on my computer using DVD who had 32 and 64-bit data and for that I currently have 32-bit and 64-bit installed in my computer. So I would like to know if there is any way I can remove the 32 bit and keep the 64 bits without harming my computer or stored data because now both bits is eating space on my C drive/partition!

  OT:

  Windows

  Why do you think you have "32-bit and 64-bit" versions of Windows 7 installed?

  If you installed the 64-bit version (which you will need if your computer has more than 4 GB of RAM and you want to use all of this RAM), you can see a few references to 32-bit architecture.  The 64 bit version of Windows needs these files in order to run software that is designed for 32-bit architecture.

  Perhaps the most obvious instance is the presence of the following two directories:

  C:\Program Files and C:\Program Files (x 86).  It is normal for both of these directories present in a 64-bit system.

  Maybe this will help--> 32-bit and 64-bit Windows: frequently asked questions

• Transfer all of the data files and program from old computer (Vista) to new computer (Windows 7)

  I've been using a Dell xps 420, 32-bit Vista since 2008. I just bought a new Dell xps-8700, 64-bit with windows 7 preinstalled. I would like to transfer all THE DATA, SETTINGS AND PROGRAMS from my old computer to the new computer. I bought a cable easy transfer of Dell for windows, xp, vista, windows 7 and 8. I read somewhere that the method of cable will transfer all my installed programs. Is this true?

  Can someone give me the better, easier and faster method available. At least give me a step by step procedure for this task.

  I am 81 years old and not too computer savvy. Any help you can give will BE appreciated.   bobnancy

  From Internet Explorer

  Original title: Transfer all data and program files from old computer to the new computer

  I've been using a Dell xps 420, 32-bit Vista since 2008. I just bought a new Dell xps-8700, 64-bit with windows 7 preinstalled. I would like to transfer all THE DATA, SETTINGS AND PROGRAMS from my old computer to the new computer. I bought a cable easy transfer of Dell for windows, xp, vista, windows 7 and 8. I read somewhere that the method of cable will transfer all my installed programs. Is this true?

  No, it won't, it will transfer personal files and settings. You will have to reinstall your applications from the original installation files or install CDs and DVDs.

  Can someone give me the better, easier and faster method available. At least give me a step by step procedure for this task.

  If you really want to move your applications to the Vista computer, you will need to buy a commercial programs such as Laplink PC Mover that will allow you to move your programs:

  Laplink PCmover® | Laplink.com

  I am 81 years old and not too computer savvy. Any help you can give will BE appreciated.   bobnancy

  From Internet Explorer

  Original title: Transfer all data and program files from old computer to the new computer

• I would like to change my subscription to a new laptop computer. Can I just disconnect on the old laptop and upload the new or should I uninstall on the old?   I also installed on my desktop that will not change. Thank you!

  I would like to change my subscription to a new laptop computer. Can I just disconnect on the old laptop and upload the new or should I uninstall on the old?   I also installed on my desktop that will not change. Thank you!

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 can help

  -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  -or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0