every meter of precise timestamp 6608 with gps, irig-b

Similar Questions

• How could a routine walk-run? Inside, Indoor walk or another run? I do this routine outdoors with Gps first so that I'm not kidding my calibration data? Help please and thank you!

  How could a routine walk-run? Inside, Indoor walk or another run? I do this routine outdoors with Gps first so that I'm not kidding my calibration data? Help please and thank you!

  Hello

  Choose indoor walk or run Indoor (it does not matter which) to an indoor walk-run routine.

  Even if Apple Watch does not currently offer as a workout interval training, choose one of these allows the most appropriate data sources (which are the same for market and short) to use to track your training.

  If walking or running, the accelerometer is used to estimate pace and the distance (allow your arms swinging naturally) as well as the frequency heart sensor for the estimation of calories burned.

  Run or walk inside will not affect your calibration data. Calibration is based on the GPS of the iPhone data and is only held during the outdoor walking training or race outdoors when the iPhone combined is taken along.

  More information:

  Use of the workout on your Apple Watch - Apple Support

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

• Highway with GPS Locator 2013

  Hello... Highway 2013 with GPS Locator accepts the format longitude and latitude to find addresses in continental Europe. Also will it store tagged and entered multiple, as does Google Earth in this format?

  It is my intention to travel throughout Europe in my camper and want to connect ALL gites recognized beforehand. When I'm a useless to refer to a book for this information area.

  The highway 2013 forums are here: http://social.microsoft.com/Forums/en-US/home?forum=streetsandtrips

• Cannot install Microsoft Streets & Trips with GPS 2011 error: your registry settings for this application were not copied correctly.

  Original title: Registry loading problem streets & trips

  I bought the MicroSoft Streets & Trips with GPS 2011 disc. After the loading and activation, I get the message "your registry settings for this application were not correctly copied. I uninstalled and reinstalled 3 times. I even thought that it might be a computer problem, so I bought a new computer, but same result. Should I simply a damaged drive? What is my solution?  Russ B, Mt Laurel NJ.

  Hello

  1. where did you buy the disc?

  I suggest you to send your request in the below link.

  Support for Microsoft Streets & Trips: http://social.Microsoft.com/forums/en-us/streetsandtrips/threads

  Reference: http://www.Microsoft.com/streets/en-us/community-and-news.aspx

  Hope this information is useful.

• I have Windows XP. I am trying to download Microsoft Streets & Trips 2009 / with GPS Locator.

  I have Windows XP. I am trying to download Microsoft Streets & Trips 2009 / with GPS Locator. A notice appears stating (format not supported). Help, please.

  Hello

  Check with the streets and the support of the TRIPS Agreement.

  Streets & Trips
  http://www.Microsoft.com/streets/en-us/default.aspxp

  Streets & Trips - help and Support
  http://www.Microsoft.com/streets/en-us/support-and-training.aspx

  Streets and travel community
  http://www.Microsoft.com/streets/en-us/community-and-news.aspx

  Streets and travel Forum
  http://social.Microsoft.com/forums/en-us/streetsandtrips/threads

  Support for MapPoint, streets & trips and Highway
  http://support.Microsoft.com/ph/851

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• You want to run the software RAID (more precisely 5) included with Windows Vista Home Premium. Do you know where I can find documentation and how - in?

  You want to run the software RAID (more precisely 5) included with Windows Vista Home Premium.  Do you know where I can find documentation and how - in?

  Hello

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
  Please post your question in the below link:
  http://social.technet.Microsoft.com/forums/en/IECs/threads

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can I switch to Streets & Trips with GPS Locator 2010 free if I already have the version of 2005?

  Can I switch to Streets & Trips with GPS Locator 2010 free if I already have the version of 2005?

  Hi Little rebel,

  To upgrade Microsoft Streets & Trips with GPS Locator 2005, you just buy the new version of the software, streets & trips 2010. Hardware (GPS Locator) is continuing to function.

  Review: Streets & trips

  Community of users of streets & trips

  Tips & tricks for streets & trips

  Laptop GPS World

• Crazy slider with GPS connected

  I am running Windows 7 and when I restart my computer with GPS plugged into the cursor goes crazy.

  I loaded the latest garmin driver and the driver for the new serial port usb converter. (I just bought that the previous one was not compatible with windows 7). However the problem persists.

  I did not have this problem with XP or vista.

  This behavior is caused by the GPS being misidentified as a modem or trackball series or a mouse series. Misidentification is made in the module serenum.sys, an enumerator of plug-and-play device, which is called by default by most drivers series, including the serial of Windows default drivers. Among other things, this module detects the incoming data to try to identify the various devices series using identification techniques which have been developed in 1995 for pre-existing modems and pointer devices. See: http://technet.microsoft.com/en-us/library/cc767877.aspx for example, or http://msdn.microsoft.com/en-us/library/windows/hardware/ff547451(v=vs.85).aspx.

  The more discreet way to solve this is to change the your series driver .inf file specify that serenum.sys should not be invoked during initialization of the driver for your particular device. Unfortunately, as far as I know, there is no standard method to do this. The option may or may not be available for your particular driver.

  There are ways to disable serenum.sys in earlier versions of Windows, but Windows 7 is so good that "fix" himself, it beats many of these old techniques.

• 2013 Street & trips with GPS?

  How to connect the 2013 streets & trips with GPS function to the GPS Portable unit?

  Hello

  You can ask your question in the forums of streets & trips dedicated from Microsoft here:

  http://social.microsoft.com/Forums/en-US/streetsandtrips/threads .

  It may be useful

• Insert data to TIMESTAMP (6) WITH ZONE SCHEDULE

  Hi team,

  I am facing problem will insert in the other sample table (the Timestamp data type Date) as

  Oracle Version A_SCHEMA, B_SCHEMA are PL/SQL Release 11.2.0.2.0 - Production

  Name of the table:-A_SCHEMA. DATA1

  create table A_SCHEMA.DATA1(
  PLAN_CODE_V varchar2(12 byte),
  ITEM_CODE_N number(10,0),
  START_DATE DATE);
  
  insert into DATA1 values('11p',12,sysdate);
  insert into DATA1 values('12p',12,sysdate);
  
  
  

  Insert 2 records I'm moving the table to the other schema B_SCHEMA. Data1

  create table B_SCHEMA.DATA1(
  PLAN_CODE_V varchar2(12 byte),
  ITEM_CODE_N number(10,0),
  START_DATE TIMESTAMP(6) WITH TIME ZONE);
  
  
  

  and I based ON a NORMAL FUNCTION index on table on B.SCHEMA. DATA1

  CREATE UNIQUE INDEX B_SCHEMA . PRC_PLN_DTLS # PLN_COD$ PK ON B_SCHEMA . Data1
  ()PLAN_CODE_V ITEM_CODE_N SYS_EXTRACT_UTC ('START_DATE'))

  and

  INSERT INTO B_SCHEMA. Data1 )

  PLAN_CODE_V,

  ITEM_CODE_N,

  START_DATE

  )

  SELECT

  PLAN_CODE_V

  ITEM_CODE_N

  actors (start_date timestamp)

  OF A_SCHEMA. Data1

  SQL error: ORA-00001: unique constraint (B_SCHEMA. PRC_PLN_DTLS # PLN_COD$ PK) violated

  Let me know how to overcome this constraint. ?

  (Can not use more than one diagram here)

  Changing to START_DATE end_date gives me:

  SQL > desc data1

  Name                                                  Null?    Type

  ----------------------------------------------------- -------- ------------------------------------

  PLAN_CODE_V VARCHAR2 (12)

  ITEM_CODE_N NUMBER (10)

  START_DATE                                                     DATE

  SQL > desc data2

  Name                                                  Null?    Type

  ----------------------------------------------------- -------- ------------------------------------

  PLAN_CODE_V VARCHAR2 (12)

  ITEM_CODE_N NUMBER (10)

  START_DATE TIMESTAMP (6) WITH TIME ZONE

  SQL > select * from all_indexes where index_name = ' PRC_PLN_DTLS # PLN_COD$ PK ';

  OWNER INDEX_NAME INDEX_TYPE

  ------------------------------ ------------------------------ ---------------------------

  TABLE_OWNER, TABLE_NAME TABLE UNIQUENES COMPRESS PREFIX_LENGTH

  ------------------------------ ------------------------------ ----- --------- -------- -------------

  NOM_TABLESPACE INI_TRANS INITIAL_EXTENT NEXT_EXTENT MIN_EXTENTS MAX_TRANS

  ------------------------------ ---------- ---------- -------------- ----------- -----------

  MAX_EXTENTS PCT_INCREASE PCT_THRESHOLD INCLUDE_COLUMN FREELISTS FREELIST_GROUPS PCT_FREE LOG

  ----------- ------------ ------------- -------------- ---------- --------------- ---------- ---

  BLEVEL LEAF_BLOCKS DISTINCT_KEYS AVG_LEAF_BLOCKS_PER_KEY AVG_DATA_BLOCKS_PER_KEY

  ---------- ----------- ------------- ----------------------- -----------------------

  CLUSTERING_FACTOR NUM_ROWS SAMPLE_SIZE LAST_ANALYZED STATUS

  ----------------- -------- ---------- ----------- -------------------

  DEGREE INSTANCES BY T G S BUFFER_

  ---------------------------------------- ---------------------------------------- --- - - - -------

  FLASH_C CELL_FL USE PCT_DIRECT_ACCESS ITYP_OWNER TERM

  ------- ------- --- --------------- ----------------- ------------------------------

  ITYP_NAME

  ------------------------------

  PARAMETERS

  ----------------------------------------------------------------------------------------------------

  GLO DOMIDX_STATU DOMIDX FUNCIDX_ JOI ITO DRO VISIBILITY DOMIDX_MANAGEM SEG

  --- ------------ ------ -------- --- --- --- --------- -------------- ---

  HOEK PRC_PLN_DTLS # PLN_COD$ PK BASED ON A NORMAL FUNCTION

  HOEK DATA2 SINGLE DISABLED TABLE

  2 255 65536 1048576 1 USERS

  2147483645                                                                              10 YES

  0           0             0                       0                       0

  VALID 0 0 0 12:52:56 11/12/2013

  1                                        1                                        NO  N N N DEFAULT

  DEFAULT DEFAULT NO.

  UNACTIVATED NO. NO. VISIBLE YES NO.

  1 selected line.

  SQL > INSERT INTO data2)

  2 PLAN_CODE_V,

  ITEM_CODE_N 3,.

  START_DATE 4

  5           )

  6. SELECT

  7 PLAN_CODE_V

  8, ITEM_CODE_N

  9, mount (start_date timestamp)

  10 FROM DATA1;

  2 rows created.

  SQL > select * from Database2.

  PLAN_CODE_V ITEM_CODE_N START_DATE

  ------------ ----------- ---------------------------------------------------------------------------

  11 12 12 - NOV - 13 12.49.53.000000 p h + 01:00

  12 12 12 - NOV - 13 12.49.54.000000 p h + 01:00

  2 selected lines.

• I want to know if it's possible in Adobe Muse to have a section on a Web page that updates every 30 seconds or 30 minutes with a URL for the snapshot of a live webcam feed

  I want to know if it's possible in Adobe Muse to have a section on a Web page that updates every 30 seconds or 30 minutes with a URL for the snapshot of a live webcam feed

  You can do this using Insert HTML, you must use the direct power code on the page of Muse.

  Thank you

  Sanjit

• Dell Precision Workstation 690 with Win7-64 final. -3 TB hard drive?

  I have a Dell Precision Workstation 690 with Win7 64 Ultimate installed.  I want to use a 3 TB drive.  How will I know if the SATA controller is compatible with a 3 TB drive. ???

  How to know what Board motherboard or the SATA controller module I have?  When the computer starts first the BIOS detects SAS 5 Host Bus HBAO (?)  I forgot the exact name of disks while he finds the SATA drives.

  Greetings Tenoc,

  Thanks for posting your question on the community.

  The integrated SAS controller that comes with the Precision 690 name: 1068 LSI PCI - X - SAS 3 Gb/s controller. He is old enough, at this stage, and I'm sure that it only supports MBR (limit UP to 2 TB).

  You can try adding in a newer card, like the Perc H710. Not sure if it works or not. There are various other cards you might try there.

• Precise timestamp on the graph of the band with scrolling

  I have a user interface with a set of synchronized graphics that operate in mode scrolling stripchart.  The elevator of the x-axis is visible on one of the cards, and the operator has the ability to take a break from the update of this table (essentially locking the entrance to the chart) and scrolling in a bit of history.  The width of the graph is about one minute of data, the number of points has been set to allow about an hour to scroll of history.  Other maps which are synchronized with the main chart have the x-axis property nodes attached, so that they follow the scrolling of the main graphic.

  Everything works fine with the current configuration, except for one small detail: the timestamps.  I put date and time stamping visible on the x-axis of the main graphic, so that operators know exactly when any aberration in the data actually took place.  I have seen a few entries in how add real timestamp, but none of them seemed to work properly.  They work very well on a standard sight, but fail miserably once the scrolling action is activated, so I have to do something wrong.

  Any suggestions on the best way to get this accomplished timestamp?  It's absolutely crazy to me how much pain is to put a timestamp to the real real world in a graphic...  As someone who constantly defends LabVIEW against colleagues who claim that it is "too difficult" to use it, it's kind of embarrassing when a thing so simple becomes so complicated in LabVIEW!

  The short answer is that this is impossible with a graphic if you add the requirement to be able to take a break. The reason is simple - a chart stores data on its own, but it saves all the values of X - you give only values Y and for the X values he simply uses the index of the value and the most you can do is set a t0 and delta t for the X scale. This works normally, but does not work when you stop feeding data to the chart, because the value of X is not stored. I heard someone say once a waveform graph does not allow this, but I've never looked into it and I'm not sure that's true.

  What you can do is use a graphic instead of a chart - in a graph, you provide values X and Y for each point, so you can have absolute time for the x-axis values. The key point is that, to a chart, you must provide all the data to draw, you must maintain a circular buffer of the data yourself. You can do this by using a queue with loss, when you preview the queue to get the data, but there are also some examples online, as well as in the finder of the example, if you search for 'XY Chart'.

• He had with GPS acuraccy

  I gave up trying to get the GPS working properly, it is always several streets off. At least, it puts me in the right city = p
  I've been really close back to the pre, but I really like the webOS and its great to have a tactile keyboard (iPhone former user). Love the fact that I can drag and drop music and images on the device.
  
  So what I ended up doing was to buy a tom tom yesterday lol, works very well and its nice to follow within a few feet instead miles.

  Try not to be a wise guy... but have to ask. You use it outside OK? With a view sky facing? And you have the GPS enabled, not only Auto location? Mine is literally as acurate as my dedicated Delorme GPS. Also did you run the device Info/More of information / preferences-> interactive Tests / GPS?

  Also of the dialer type ##GPS # and see what it says for your precision, after return what your getting with all this. As I said, mine is very accurate but still once make sure you've done everything above first. If its while I'm driving in a car I can zoom in on the satellite view and its dead, even on what side of the road I'm on.

• Smartphones blackBerry with GPS problems

  Hello

  I have problems with applications that use the gps with my bold 9780, I'm in os 6 v. 0.0.285

  GPS location that works as when I update location in gps options I have the new values for latitute and longitude, although satellite number is zero and the precision is 1098 meters according to me (which is a kilometer!)

  I tried different applications such as google maps, garmin, lifeinpocket and in zero gps is workin

  any idea?

  Thank you

  To obtain a more accurate reading, activate your phone to use the network as GPS settings.

  Go to Options > device > do site settings, scroll to the place making it easier to choose Enabled for adjustment.

  With the network (the cell tower information) parameters and GPS working together, your accuracy should improve.  I have no explanation why your GPS alone is not very accurate (very strange), but try what I suggested.