Everyone looks when you first start?

Similar Questions

• can I delete login page so that windows starts automatically when you first start?

  can I delete login page so that windows starts automatically when you first start?

  Yes, you can.

  See http://windowsxp.mvps.org/Autologon.htm

• Batteries for portable computers are dead when you first start!

  About 14 months ago I bought an ACER ASPIRE 6930 a Best Buy in the Canada. On the car driving home, I removed the laptop box, he turned and he began the installation of Windows Vista. The battery is dead (DOH!) until installation has been completed, and when I got home, I have plugged into the wall and tried to continue the installation/Setup program. The laptop does not start and Acer people said that I must refer to them (all the way to Texas) for redress. I asked my friend who is a technician to have a peek to see if he could solve the problem. He was able to successfully install Windows XP Pro on my laptop using a serial number provided by the college. After a year, the serial number being exhausted, and my office is now posted a message on the bottom right "you can be a victim of software counterfeiting." So my question is:

  Is there a way I can install a version of Windows Vista (FREE) that was supposed to come with the laptop? I have my certificate of authenticity, serial numbers, etc. on a sticker on the bottom of my laptop. Can download the installation of Vista, then the installation files it will allow me to connect these information for a successful installation?

  Thanks in advance for any help you may be able to provide. This laptop uses an Intel Core 2 Duo T5800 (2.0 GHz L2 cache memory, 800 MHz FSB, 2 MB). If I remember correctly, it was a version of Vista 64-bit.

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• How do I activate the calendar when you first start, I chose disable

  I can not activate the calendar. On the first run, I chose 'Disable sockets calendar' and now I can not activate.
  How to activate?

  I try to reinstall Thunderbird and add addons Lightning, but even now calendar options.

  We managed to solve the problem of:
  1. Uninstall addition
  2. restart Thunderbird
  3. search for the site of the add-on and reinstall.
  4. restart Thunderbird and once the question arose as to the introduction of the calendar.

  Problem has been resolved.

• I find it difficult to open certain files when you first launch; It takes four or five attempts until they finally open

  Original title: slow to open files

  I find it difficult to open certain files when you first launch; It takes four or five attempts until they finally open

  Hello

  -Did you change on your computer due to which the question has begun?

  Follow these steps and check if they help.

  Step 1:

  Test the issue in safe mode.

  Step 2:

  If the problem does not persist in safe mode, you can start your computer in a clean boot State.

  Note: Follow the steps in the article to restart your computer as usual.

• I made a mistake in my email address when you first register. How can I fix it because all my emails are sent to an address that doesn't exist and I can't change it.

  I made a mistake in my email address when you first register. How can I fix it because all my emails are sent to an address that doesn't exist and I can't change it.

  Hi Bethany,

  Please check the help below document:

  Change the e-mail address associated with Adobe ID.

  Kind regards

  Sheena

• HOW TO STOP ANNOYING BOILIES WHEN I FIRST START MY COMPUTER FOR MOST OF A SOFTWARE ON MY COMPUTER.

  How can I stop annoying pop ups when I first boot my computer for most of the software on my computer.

  Hello

  There are different ways to do

  1. open the particular program and under its tools then Options see if you can stop it when loading load windows

  2. you can get out of startup entries

  but be careful what you do if you disable an essential service

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Windows 7, CS4 Media Encoder of freezing and crashing when you click "Start Queue" - each sequence!

  Windows 7, Media Encoder CS4 crashes when the queue starts with firstsequences. However, open export sequences 'Add sequences' of Media Encoder very well. Have re-installed (without first uninstalling), question is underway. I have several important deadlines approaching soon, please help! Media cache has been cleared (automatically or in the past), computer has been defragmented and scanned for disk errors... I'm absolutely stumped!

  Create a new user account on your computer.  Give administrator privileges.  Launch RP and trying to send a sequence to the SOUL.  It work?  If so, the trash your preferences of Pr in your user account.

  In addition, if you do not use your account as an administrator, you should.  At the very least, set the Premiere Pro executable file to run as administrator.

  Jeff

• How can you put a missing dll file when you cannot start

  system32\hal.dll on windows xp home sp3

  system32\hal.dll on windows xp home sp3

  1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
    
  2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
    
  3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
    
  4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
    
  5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
    
  6. at the end of the output of scan type > press ENTER.
    
  7 restart your computer.

  If you do not have a Windows Xp disk, follow the instructions HERE to create a drive of the Windows Xp Recovery Console.

• I have a HP F 4280 printer who suddenly started to shake when you first put it later it begins to print what is causing that.

  I have a HP - F 4280 (copy 1) who started doing a click when turned on and just before starting to print, what causes it and what is the solution to fix it?

  copy printer 1) who all of a sudden started making a snap, it does when it is turned on and before you start printing, please tell us what is the cause and what the solution is.

  Hi Vince Mc Quade,.

  I see that you are facing problems with your printer. The printer gives a snap once on startup and printing once previously.

  Quick questions:

  1. You did changes to the computer before the show?
  2. Printer works fine except the noise?
  3. The problem occurs whenever you try to print?

  You can try the steps from the following link:

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  This seems to be a hardware problem; You can contact the manufacturer of the printer to check what they have to say about it.

  http://h30434.www3.HP.com/

  I hope that helps!

  If you encounter problems with windows, please keep us informed.

• Application of the terms of registration parent when you use START WITH / CONNECT BY FRONT

  Hello
  
  I'm trying to understand how to apply when only apparent conditions when using records to begin with... connect by prior logic.
  
  Here is an example...
  
  Table:

  CREATE TABLE TEMP_BTL
  (
    TRANS_ID               NUMBER(22,20),
    PARENT_TRANS_ID  NUMBER(22,20),
    TYPE_ID                 NUMBER,
    STATUS_ID             NUMBER
  );

  Records:

  SET DEFINE OFF;
  Insert into TEMP_BTL
     (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
   Values
     (1, NULL, 1, 2);
  Insert into TEMP_BTL
     (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
   Values
     (2, 1, 2, 1);
  Insert into TEMP_BTL
     (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
   Values
     (3, 2, 3, 4);
  Insert into TEMP_BTL
     (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
   Values
     (4, 3, 4, 3);
  Insert into TEMP_BTL
     (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
   Values
     (5, NULL, 2, 3);
  Insert into TEMP_BTL
     (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
   Values
     (6, 5, 4, 1);
  Insert into TEMP_BTL
     (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
   Values
     (7, 6, 5, 3);
  Insert into TEMP_BTL
     (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
   Values
     (8, 7, 6, 2);
  Insert into TEMP_BTL
     (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
   Values
     (9, NULL, 1, 3);

  If my query rules are:
  
  PARENT_TRANS_ID IS NULL = parent_record
  
  I have to limit my results so that only considered hierarchical groups are groups that record the type_id of the parent = 1 (single parent record limit to this condition, no children)
  
  Then I need to find the max (trans_id) of each subset for groups where the parent record type_id = 1
  
  Thus, according to the data from the example above, would be results that I would look:
  
  TRANS_ID = 1 group parent, I don't want to return trans_id = 4
  
  I would not return anything for the trans_id = 5 parent group because the type_id of that parent is not 1
  
  For trans_id 9, is the parent and the only record for this group so it is type_id = 1 I'm not going back 9 as the max (trans_id) for this game.
  
  And then, eventually, I'll limit my results to the place where the max id batch trans = 3.
  
  Any help is appreciated...
  
  Thank you
  Christine

  Hi, Christine.

  cad0227 wrote:
  Hello

  I'm trying to understand how to apply when only apparent conditions when using records to begin with... connect by prior logic.

  In your example of data 2 is the parent of 3, and 3 is the parent of 4.
  Use 'root' to describe nodes (for example, 1 and 5) that have no parents.

  Here is an example...

  Table:

  CREATE TABLE TEMP_BTL ...
  

  Thank you for including CREATE TABLE and INSERT statements. It's very useful!

  If my query rules are:

  PARENT_TRANS_ID IS NULL = parent_record

  I have to limit my results so that only considered hierarchical groups are groups that record the type_id of the parent = 1 (single parent record limit to this condition, no children)

  The START WITH clause is where to put the conditions that apply only to the roots.

  Then I need to find the max (trans_id) of each subset for groups where the parent record type_id = 1

  Thus, according to the data from the example above, would be results that I would look:

  TRANS_ID = 1 group parent, I don't want to return trans_id = 4

  I would not return anything for the trans_id = 5 parent group because the type_id of that parent is not 1

  For trans_id 9, is the parent and the only record for this group so it is type_id = 1 I'm not going back 9 as the max (trans_id) for this game.

  And then, eventually, I'll limit my results to the place where the max id batch trans = 3.

  Any help is appreciated...

  It would be useful that you reported the exact output desired. Describing the output is great, especially when it is as clear as your description, but describe the results, in addition to, not instead not to display.
  Here are the results you want?

  `  ROOT_ID MAX_TRANS_ID
  ---------- ------------
           1            4
           9            9
  

  Here's a way to get them:

  WITH     got_root_id     AS
  (
       SELECT     trans_id
       ,     CONNECT_BY_ROOT trans_id          AS root_id
       FROM     temp_btl
       WHERE     status_id     = 3
       START WITH     type_id          = 1
                   AND     parent_trans_id     IS NULL
       CONNECT BY     parent_trans_id     = PRIOR trans_id
  )
  SELECT       root_id
  ,       MAX (trans_id)     AS max_trans_id
  FROM       got_root_id
  GROUP BY  root_id
  ;
  

  Published by: Frank Kulash on 13 August 2012 13:58

• When I create the domain user, I used option user must change when you first connect, but am unble to get this

  When I create the domain user, I used option user must change at the first logon, but am unble to get it.

  Hi RadhamAravind,

  Thanks for posting in the Microsoft Community.

  As you create a domain user, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 security TechNet Forums

• Use of high by FORMS (9000 port) when you first login after the CPU connection network

  Hi all

  Oracle E - biz: 12.1.3

  Database: 11.2.0.3

  OPERATING SYSTEM: AIX 6.1

  We applied the last week we have applied CPU July 13 for the first time in our environment Ebiz.

  Patches applied:

  11.2.0.3 SPU database Patch 16742095

  Apps: R12.1 16772121

  10.1.3 home: 9173038

  10.1.2 home: 12837860

  After the application of the hotfix, when the user is connected for the first time, FORMS cmdlet takes too long to open, and during this time network use was very high.

  This happened for the first connection, we have more than 300 + users and recording everything at the same time, created a failure almost because of the high network utilization.

  
  

  Guys, any reason for this behavior. This will happen for the future application of CPU?

  
  

  Moreover, we're on the DECISION-MAKING of FORMS mode.

  Thanks in advance

  Hello

  I'm not sure whether the cache can be copied from one machine to another and the same process, a lag in time should be tolerated in this case that it is reasonable.

  But anyway, you can also lift an SR to check whether the technical support engineers can provide a workaround solution.

  Thank you &

  Best regards

• Button refresh does not appear in the address bar and Favorites bar is empty when I first start FF30

  When I launch Firefox 30, my favorite bar is empty. I have to deselect in view > toolbars, and select new it and they appear.
  Also, my refresh button at the far right of the address bar has disappeared and all I see is a magnifying glass.
  Another question, I now have is that when I copy and paste the URL of any page in the location bar, this then triggers a Google search and go directly to the page associated with the URL.
  I tried to rename the profile FF and uninstalling/reinstalling FF, but this has not resolved.
  Pointers as my next step should be would be appreciated.
  IM using Windows 7 Professional 32-bit SP1

  Hi Tora Bisu,
  Thanks for the reply, but that did not help me because you didn't tell me where to find the ' Stop/reload button Hide URL' parameter, and I couldn't find myself.
  However I have addressed myself in addons successively disabling and re-enabling them until I discovered the culprit.
  The culprit that I discovered was the classic theme restaurateur, who has now been duly disabled and will not be used again.

• INTERNET SPADES. WHEN YOU CLICK START... ACCESSORIES... GAMES... ETC.

  My asset stings on the internet does not come up anymore. All other games will not appear as internet, checkers, backgammon, etc., but not the Pike! What is going on?

  Have you tried by pressing the "Start" button and typing Spades ? Microsoft Student Partner