everything also distribute video clips on way...

Similar Questions

• Mask containing video clips

  Hey guys

  I creates a "shimmer" above an object using a mask as follows:

  Layer 1: mask

  Layer 2: Effect of shimmer with a motion tween

  Layer 3: Object that has the shimmer effect applied to this

  The layer mask is composed of three drawing objects and the shimmer effect behaves exactly as it should either applies only when the objects are.

  However, I have also five video clips on the stage I want the effect of applied shimmer to the - but not when the clip has been clicked. If the answer is simple, create five instances of clip said in the mask and when the user clicks on the instance on the stage, set the visible property of the instance in the false mask or use removeChild...

  Laughing out loud

  Whenever I have add instances of the clip to the mask, the shimmer effect is not applied to them, and yet if I will break them and use them as objects drawn, they work fine (but obviously drawing objects can be animated using AS).

  My question is - is this even possible, and if so, how would I go to do it?

  Thanks in advance

  the contours and all the squares in a new movieclip and claimed that movieclip "_mask"

  If your motion to the effect of shimmer twenn is already in a movieclip call this movieclip "_mask".

  Use then these three lines:

  _MASK.cacheAsBitmap = true;

  _maskee.cacheAsBitmap = true;

  _maskee. Mask = _mask;

  'ActionScript' your mask

  to do this _mask and _maskee must live in 'normal' layers (which are neither mask nor a hidden layer)

  to illustrate the difference:

  This is how a treaty cache mask complex (nested objects / your problem):

  

  This is how a treaty cache mask complex (nested objects / your solution):

  

  The scenario looks like this:

  

• Best way to adjust the lighting in the video clips

  Is there a 'best' way to adjust the lighting conditions in a video clip?  I have a clip with terrible lighting conditions and can not remove the scenario.

  While I don't expect a perfect solution, I hope that there are approaches better than those I serve.  If the recommendations include third-party plugins, I would appreciate hearing about them, as well.

  I have been using the corrector, gamma and luminance correction filters.  Adjustments of corrector gamma in higher values, but seems to only work by discrete steps.  So, if the gamma should be entered upwards or downwards in a clip, there is a very visible and sometimes jarring visual effect.  The luma corrector seems to only be able to increase the brightness level (thanks to a combination of all the variables of 5 or 6, including brightness, gain, gamma, etc.) before the clip appears washed out.

  Thank you

  Steve

  All the CC and grading should begin with 'levels '.

  You could then enter the 3 - Way Color Correction.

  You can also watch a more powerful CC such as 2 Colorista

• Why observed my windows Media Player flat mpeg-4 video clips of my nokia n7 momile? Ive tried also nokia ovi suite, without success. What are the alternatives to play my clips on the pc

  Why observed my windows Media Player flat mpeg-4 video clips of my nokia n7 momile? Ive tried also nokia ovi suite, without success. What are the alternatives to play my clips on the pc

  Might be interesting to try to download and install a
  the following freeware media players:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)
  (name of the file to download: vlc - 2.0.1 - win32.exe)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)
  (name of the file to download: MPC - HomeCinema.1.6.2.4902.x 86 .exe)

• Is there a way to clear all event listeners, to stop all the video clips, etc.?

  Is there a syntax for that?

  I have a movie that has 15 images. Each image has integrated video clips in video clips, tons of entertainment and event listeners. None is needed except when they are on the scene, on the frame. However, the animations continue even when the frame is left.

  For example, I have a framework that shows a rendered animation dynamically the leaves that fall from the tree. When the frame is left, the leaves continue to decline.

  There are many cases of this kind of thing happens.

  
  Ideally, I'd like to just be able to erase everything when a new image is loaded, since no animations or postponed event from one image to the other listeners.

  
  Is it possible to do it without the thousands of lines of code it would take to manually remove all single animation and event listener and sounds, etc., of the scene?

  Thank you very much!

  Amber

  You must do it manually.

  or, you can convert each image into a swf file.  load each swf when necessary and, if you're publishing to fp 10 +, you can apply unloadAndStop() to kill all the flows in the SWF loaded and ready these assets to gc.

• Player Windows media poster video clip but I have no sound. Everything else on cumputer plays.

  None of my video clips to ring when shown on windows media player 11. speakers work for all applications. How can I turn on the sound. It is not on mute and as strong it goes upward.

  System probably lack you one or more audio codecs. Codec is short of compression and decompression of that particular video file and the correct audio part may be not available.

  I recommend one of the K-Lite codec packages available here to download and install. The regular package should be enough, but you can opt for the full package.

  Once you have downloaded the package on your computer, you can right-click on the installation. EXE and run as administrator to avoid any problems with the installation.

   

• I'm having problems to read video clips also can't send, reply, or forward in hotmail. Any suggestions? Thank you in advance.

  The message "internet explore has stopped working" keeps popping up whenever I want to play a video clip or

  Send, transmit or answer by hotmail.  Any suggestions?  Thank you in advance.

  Hello

  The question you have posted is related to Windows Live, and would be better suited in the Windows Live forum. Please visit the link below to find a community that will provide the support you want. http://windowslivehelp.com/product.aspx?ProductID=1

• try to export a video clip, but it's not compatible with flash player 17. Help?

  I'm trying to export a video clip, but it indicates that it contains features that are not compatible with flash player 17 and don't work every time, I tried exporting in different ways and using parameters different flash player, but nothing seems to work. It displays a message at the bottom of the screen, but I don't know how to solve this problem. Once I have try to export the adobe media encoder file opens and shows me a video file, but it lacks almost everything I did and is not what I'm trying to export. I hope you can help, thanks Caitlin

  You cannot export the integrated H.264 video. If you try to put animations on top of some videos, do export you already, but it does not send through Adobe Media Encoder. There is also a checkbox to ignore the color of the scene and to generate an alpha channel. Do it too. You should end up with a MOV file that can sit on top of the original video, click, in After Effects or Premiere.

• Video clips play in reverse in AS 3.0

  Hey all. I change all my files in AS 3.0 because of a few new elements, I would like to use in flash CS4.
  Here: http://www.iaw-atlanta.com/IvyLeague1-13-09.html I have the bottom navigation menu with 4 buttons. When the buttons are speckled on they go up and when they are mottled the film plays in reverse so they go down. Essentially in the clip, I stopped him, and the next frame gotoAndStop when the button is wriggle on and then have a script of saying things reverse when wriggle on. I know how to do this in AS 2.0, but how can I translate the script to 3.0?

  DjPhantasy5,

  > Ok thanks, I'll see what he also has to say as well.

  In fact, NedWebs pretty much nailed. :) The approach you have taken
  is an interesting question, because it evolves all the way back to Flash Player 5.
  has not yet supported the MovieClip.onEnterFrame event. Without
  event, you need something like your "controller" - a separate symbol
  a loop of timeline - to run the code that depends on the loops of the frame.

  Available from Flash Player 6, this event allows you to
  consolidate your code a bit by putting everything in a unique setting and avoiding
  the additional movie clip symbol. This does not mean that your approach is wrong, by
  any stretching. In fact, it's good to know your options, because if you always
  need to publish for Flash Player 5, you had probably better to use the installation program
  you took.

  I'll demonstrate onEnterFrame in just a bit, in case you want to take a
  Watch this.

  > There is no mention of _root in AS3, but you can use a
  > MovieClip (this.parent) (which replaces what _parent)
  (> used to do) to find something outside the immediate
  > movieclip.

  The term "parent" in this context, is technically a property of the
  The class MovieClip, which means all the clips in AS3 have access to the
  feature 'parent', which points to the timeline that contains the video
  in question. Buttons have also a property 'parent '. In AS2,
  property has done exactly the same thing, only it was preceded by an underscore.

  In fact, the proposed codification of the NedWebs works the same in your existin file.
  Instead:

  Your existing code...
  If {(_root.animation._currentframe>1)}
  _root. Animation.prevFrame ();
  this.gotoAndPlay (2)
  }

  If (_root.animation._currentframe<=1)>
  this.gotoAndStop (1);
  }

  ... you can use this:

  Alternative code...
  If {(_parent.animation._currentframe>1)}
  _parent. Animation.prevFrame ();
  gotoAndPlay (2)
  }

  If (_parent.animation._currentframe<=1)>
  gotoAndStop (1);
  }

  ... because this range - in other words, from this point of view - this
  MovieClip._parent property points to the same scenario as _root done.
  That changes, of course, based on how deeply nested the current scope are.
  The word 'this' in the code above is optional, because Flash understand
  What place you are in. From the point of view of the present code, _parent is
  interpreted as referring to chronology parent of the current, just as scope
  gotoAndPlay() is interpreted to the timeline of the current scope.
  You might precede either of those of 'this' or not.

  Many people will say that _root is probably best to avoid, only because
  It's a slippery slope. It does not always refer to the main timeline you
  think he does, according to whether or not your file SWF is loaded in another
  SWF when running. Meanwhile, _parent * always * refers to the immediately
  relative chronology.

  Then, when you look at this way, this perfectly valid AS2:

  If {(_parent.animation._currentframe>1)}

  ... is not very different at all from its counterpart of the AS3:

  If (MovieClip (parent).animation.currentFrame > 1) {}

  It would be nicer if you need convert the parent as a reference
  Movie clip here, but if you haven't, AS3 do not realize that the scope in
  This is a clip.

  > You can string them along like...
  > MovieClip (this.parent.parent)

  Exactly.

  > Your _currentframe in becomes the controller
  > currentFrame. That's all. The rest of what I have
  > saw will fly as is.

  Not quite. AS3 does not support on() or onClipEvent(), functions
  you will not be able to reach your management code for the button. Instead,.
  you will have to put in a keyframe - you can also do with AS2. There
  a good idea, anyway, because it allows to put all your code in a
  place, making it easier to find.

  Here's a quick word on the direct attachment:

  http://www.quip.net/blog/2006/Flash/museum-pieces-on-and-onClipEvent

  To convert your existing AS3 FLA structure, you could, for example.
  follow these steps:

  animation.buttonMode = true;
  animation.addEventListener (MouseEvent.ROLL_OUT, outHandler);
  animation.addEventListener (MouseEvent.ROLL_OVER, overHandler);

  function outHandler(evt:MouseEvent):void {}
  controller.gotoAndPlay (2);
  };
  function overHandler(evt:MouseEvent):void {}
  controller.gotoAndPlay (4);
  };

  That supports the code on (rollout) and executed in your current
  Version. The first line (buttonMode) is necessary because I got rid of
  the symbol button and, instead, handlers directly associated with
  your movie clip. (Video clips manage events of type button, too, if you)
  do not need the button.) In AS3, event handling is very simple:
  you are referencing the object (here, animation), invoke its hereditary
  addEventListener() method, then passes two parameters: a) the event to
  Listening and (b) the function to execute when the event occurs.

  You can see that noted above. In AS2, there are several ways
  to handle events, including one () /onClipEvent (), so it is harder to know when
  to use what approach. For the buttons and video clips, the principle works the
  same I just showed, but the syntax is different.

  Let's take a look to reduce all this code using the
  onEnterFrame event. First of all, check out this AS2 version:

  animation.onRollOut = outHandler;
  animation.onRollOver = overHandler;

  function outHandler (): Void {}
  this.onEnterFrame = reversePlay;
  };
  function overHandler (): Void {}
  this.onEnterFrame = null;
  This.Play ();
  };
  function reversePlay (): Void {}
  this.prevFrame ();
  };

  This code would appear in box 1. You don't need the controller
  video clip. The movie clip contains more an orb button, because
  We use the animation itself as the 'button '. (You can still see what)
  a feature that any object is looking toward the top of its class. If you are dealing
  with a clip, see the MovieClip class. See the position properties
  to find out what features of the object, see methods to know
  what the object can do and see events to find out what the object can respond
  (to).

  In the code above, it is prepared quite easily. It is AS2,
  don't forget. We have two events, we are listening to: MovieClip.onRollOut and
  MovieClip.onRollOver. these events are set up for the animated film
  clip using the name of the instance and associated to custom match
  functions. The outHandler() function associates a different function to the
  MovieClip.onEnterFrame event of the animation clip. Very simply, it
  load of animation to make the custom function reversePlay() whenever
  He meets an onEnterFrame event. The overHandler() function that kills the
  Association of suppression outside and saying animation to play, via the
  MovieClip.play () method. Finally, the reversePlay() function simply calls
  MovieClip.prevFrame () on the movie clip.

  Here's the AS3 version:

  animation.buttonMode = true;
  animation.addEventListener (MouseEvent.ROLL_OUT, outHandler);
  animation.addEventListener (MouseEvent.ROLL_OVER, overHandler);

  function outHandler(evt:MouseEvent):void {}
  animation.addEventListener (Event.ENTER_FRAME, reversePlay);
  };
  function overHandler(evt:MouseEvent):void {}
  animation.removeEventListener (Event.ENTER_FRAME, reversePlay);
  Animation.Play ();
  };
  function reversePlay(evt:Event):void {}
  evt.target.prevFrame ();
  };

  It seems wordier, but if you look closely, you will see that there
  essentially the same thing. The main difference is the scope of operation in
  AS3. In AS2, there are many references to "it", because the event
  Manager operating in the same scope as the object to which the
  Association is formed. In AS3, the references are not to "that", but rather to
  the same movie clip by his * name *, because in AS3, the scope
  works in the same scenario in which the code is displayed (IE, in this)
  case, the main timeline).

  In the function reversePlay(), in order to emulate a 'this' kind of
  the installer, I refer to the parameter that is passed to the event handler all the
  functions in AS3. I happened to name "TTE" (for the event), but you can call
  it what you like. In the case of reversePlay(), the evt parameter refers to
  an instance of the event class, which has a property to target. The target
  property refers to the object that sent the event - is be
  animation, in this case. Then evt.target, in this context, refers to
  animation, that's what I call the MovieClip.prevFrame () method on.

  I downloaded some FLA files to my server. I keep them
  it for always... maybe a few weeks, from this post:

  http://www.quip.NET/RewindTestAS3.fla
  http://www.quip.NET/RewindTestAS3_new.fla
  http://www.quip.NET/RewindTestAS2_new.fla

  David Stiller
  Co-author, ActionScript 3.0 quick reference Guide
  http://tinyurl.com/2s28a5
  "Luck is the residue of good design."

• A project that I created is no longer works.  All video clips .mpg who ask to be reimported, and when I try to import from its original folder, all the files are slim.

  I currently have iMovie 10.1.2 and OS 10.11.6.  All except a video clip in a compilation of long hours are black with an exclamation mark.  They have the error statement, that the file is missing, re-import the original source media.  The clips are all .mpg and had imported fine when I created the film project of the month of May.  When I try to use the function "Import Media" drop, and I go in the folder on the desktop files located in, all the original .mpg files are low.  The two pictures that were in the project appear on the lower part.  Oh, and I did all that stored on the cloud.  I also wanted to start a new project, part II, but all the source files show a similar dim for all .mpg files.  Apple decided not to allow the .mpg files in iMovie?  If so, what is my next step?

  iMovie accepts more mpg files. The easiest way to work with them is in the finder do a right-click on the mpg file and select "encode the selected video files. In the dialog box that appears, choose the desired conversion. The converted file appears in the import iMovie window, and you can import it.

• Combine all the video clips in a new clip

  Not exactly necessary for my workflow, but something I'd expect to see. In a main element with many intermittent faults, which I clean, either in the viewer or the timeline, my clips unique original becomes a series of video clips. With this master clip now cleaned, I couldn't want to change in a way that maps the changes done to eliminate imperfections. Kinda like having a $5, $4 1 s and the spare change to raise to $10 and preferring to have a single $10 bill, instead, another handful.

  The manual says no way to do it within the FCE. If I export the standalone series of clips as .mov, QT hit the resolution from 1080 to 720 (no thanks). If I export to QT conversion, the 1080 can be maintained, but the only file that results has its image reduced by 20% (?), surrounding it with black borders. When brought within the CTF, the clip is still listed as 1080. But I still have to resize it with success, as the means for it apparently do not allow borders to trim.

  TIA

  Try this:

  Re: Export in best quality

  Also, check the project properties are what you think they should be.

  Al

• Can I change several non-contiguous single video clip segments and the remaining segments together in a functional element?

  I have a second video clip 90 I want to reduce to 50 seconds by removing 10 seconds at the beginning, 5 seconds to end & 25 seconds on average. This means that I use two non-contiguous segments in the middle. The use of 'The Start Trim Point value' a second time eliminates the segment previously created with this command. Is there a way to create the first segment, save it, create the second segment, save it, and then combine the two?

  Windows XP

  Movie Maker 5.1 (2.1.4028.0)

  I have a second video clip 90 I want to reduce to 50 seconds by removing 10 seconds at the beginning, 5 seconds to end & 25 seconds on average. This means that I use two non-contiguous segments in the middle. The use of 'The Start Trim Point value' a second time eliminates the segment previously created with this command. Is there a way to create the first segment, save it, create the second segment, save it, and then combine the two?

  Windows XP

  Movie Maker 5.1 (2.1.4028.0)

  ============================================
  The cartel command only works if the video has been imported
  in segments (this only happens when "create Clips for video
  Files are checked in the import screen.) or if the files are divided
  in the timeline with no editing. If the files are changed or re -.
  organized the handset command will not work.

  You can save segments individually if all other files are
  removed from the timeline. The original file must be
  adding to the timeline and edited for each successive change and
  record.

  Easy solution... you can combine edited clips by registering the
  the project in the. WMV format. The result will be a single. WMV
  video file.

  XP Windows Movie Maker 2.1...
  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  Personally, I prefer to split video files and remove the
  unwanted part instead of use the trim option.

  "Split a Clip in MM2.1.

  Drag the video/audio clip to the
  Timeline.

  Read the video/audio by clicking on the
  "Play" button under the display screen.

  You will see the playback indicator
  (vertical line), advancing through the
  timeline.

  Click on the button "Pause" to the point
  where you want to split and type...
  CTRL + L or click the "Split" button to the
  at the bottom of the display screen.
  (you can also make adjustments to)
  Drag the playback indicator)

  Make splits as much as you want and
  remove unwanted in law clips
  Click on / delete.

• In Movie Maker 6.0 can a video clip (with mute) be spliced in another video clip so it seems to work with the original sound of the first video?

  Hi, I put a video together for my MOM to 70th and one of her friends has provided a video clip of her playing a classical piece on the piano for several minutes.  I would like to cover this clip with other video sequences (landscapes, etc.) whereas the way piano since the main video track in the background.
  I tried to let fall the piano video file directly in the audio editing panel and then cut a second 20 segment in the video editing and insert a 20 second video (mute) images of landscape. However, the piano audio from the first video stops as soon as the strike chronology inserted piece landscape and picks up again when it ends, even if the audio scenario shows the audio piano continuously?  Am I missing a step or is this not possible?   Thank you very much.

  It should work quite as much as you described in Windows Movie Maker 6.0 (WMM 6.0), then maybe there is a step that is missed.  Let me describe how I could do and see if there's something you overlooked.

  First of all, I assume that you have already imported the clip of piano and your other clips of landscape in your collection then you can drag the there where necessary.  First, drag the piano music to the track Audio / Music in the timeline panel.  Note that if you have your video extended timeline, it will show video, Transition & Audio, but you want to get off- below that, to the Audio / Music , to follow.  At this point if you play your 'film', you should not to see any picture but just to hear the sound of the piano.  You should also only see a waveform on the audio / music.

  Now you can put anything you want on the video track.  Let's start by putting another copy of the original video of piano, but this time on the video track.  If you have developed the video track (to see the Vidéo/Audio/Transition) you will see the video piano and its associated audio waveform.  However, in your case, since you already have the audio separated, you want to cut that his partner.  Right-click on the Audio (attached to the video) track and select Muteor use the menus (Clip > Audio > Mute).

  When you preview the project, you have synchronized video browsing with the original copy of the audio piano.  At the point in the video where you want to replace the video with another piano play, making a split (key M).  Make another split at the end of the section.  It is very import that select you the video track when you add new divisions and you have not also be divide the track Audio / Music .

  Important: You want to make sure this divide the part that has the exact duration as well as landscape images, you want to replace.  So if you have 20 seconds to add, you divide 20 seconds piano images.

  Right-click on the part of piano footage (video track) and choose Remove.  Then, insert the part of sequences of landscape (also on the video track) in its place.  Once again, you will have need put this added sequence muted landscape (Clip > Audio > Mute).

  You should now see and hear the piano play.  Without any change in the audio playback in the preview window should implement the landscape images, then returns to piano images.

  If you find that your project is not behaving correctly after these splits, but are you sure that you have followed these steps, it could be a problem with your video file types.  If in doubt, try to convert all your videos to .wmv format using something like Freemake Video Converter (freemake.com)

  In any case, I hope that you are able to achieve, because it is certainly possible.  Good luck and post back with further questions or information, you can have.

• I get an error COOD11B1 code when you try to play a video clip. __

  I get a COOD11B error code when I try to play a video clip.

  Hi Pat dubois,

  1. what type of video file that you are trying to play?

  If you receive error C00D11B1 code,

  Cause one. It may be a problem with the components of security of your digital media player to play the files on your computer

  Follow the instructions in the article given below, because it can help you solve the problem

  Windows Media Player C00D11B1: http://Windows.Microsoft.com/en-us/Windows7/C00D11B1

  Go to http://drmlicense.One.Microsoft.com/Indivsite/en/indivit.asp , then you will need to get the update. You need to download this patch to remove the error code and everything works again.

  Also take ownership of the files you are trying to play by right clicking on the file and taking possession.

  B cause. If you are probably trying to play a file that uses a codec that is not on your computer. I suggest you to download and install the latest pack of codecs for Windows Media Player 12 on your computer. Search using your search engine preferred for the third-party codec packs.

  Codecs, frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  NOTE: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Organize video clips in a sorted manner

  Original title: video clips
  I use windows 7, when I click on the Start button, then my documents, then the videos, I have my last vacation there, 383 individual clips, some how they are all caught up, ive tried their organization. in date and time order, but ended up in such a mess, I gave up, ive been at it for 3 days now and ive got no case, is it a quick and easy way to get them in date and time order please, ready for me change can put it on a disk.

  Ive used Director in xp, but this live version in windows 7 gives me a headache, any help much appreciated.
  Thank you very much.

  I have 383 video clips in a folder, they came on the record, when I transferred from my stringing cam, but now I want to change them and put them on a disk, but they are not in order. IE first 19th day of holiday but some clips are at the bottom of the file and say that June 30 is the first, in other words just everything involved, I want to that they in order so that when I drag them to the edit window, they are at the correct date and time sequence, I don't have start by clicking on each of them and looking at the properties and see the date and time , then their numbers as a result, 1 2 3 etc, but I ended up with just a mess, so have essentially just slung the in the video folder, I can access by clicking on documents, then videos, all I want is to get them in the order as fast and simple as possible.
  Thank you much for the help expected.

  ===========================================
  Something to try...

  Windows normally sorts filenames first alphabetically and numerically.

  If you open the folder the videos are in and go... View / details...
  You can choose the Date Modified column and it can sort them.

  To maintain this order for Movie Maker, the files must be
  numbered while in the order you prefer.

  This can be done in a batch...

  Navigate to the folder in which the files are saved... (not in the photo gallery
  but in the actual file)...

  OK when the videos are sorted... Reach... Edition / select all... Right-click
  the first video in the selected list and choose... Rename... to enter a
  a descriptive word for the Group and the number (10001)... do not forget the
  extension (.?) is included... leaving a space between the last
  letter and the first parenthesis.

  Birthday (10001). ???

  When you press on... Come in... Windows should rename other
  files. If it works as it should... When you import into Movie Maker...
  the files will be in order.

  Good luck...