Exadata as repository for ODI

Similar Questions

• Upgrade OEM repository for 12 c of 11.2.0.4 get the error of dbua

  We want to improve our repository for our 12.1.0.4 EM 11.2.0 environment. to 12.1.0.2 I have installed Oracle and applied the last CPU (. 3) now I need to my instance of rman and the EM repository but when I go to run dbua I get this error.  Any ideas?

  UnsatisfiedLinkError exception loading native library: njni12

  java.lang.UnsatisfiedLinkError: njni12 (rtld: 0712-001 CreateIoCompletionPort symbol was referenced)

  module u01/app/oracle/product/12.1.0/dbhome_1/lib/libnjni12.so (), but a definition of runtime

  the symbol could not be found.

  rtld: 0712-001 GetMultipleCompletionStatus symbol was referenced

  module u01/app/oracle/product/12.1.0/dbhome_1/lib/libnjni12.so (), but a definition of runtime

  the symbol could not be found.

  rtld: 0712-002 fatal error: leaving.)

  Exception in thread "main" java.lang.UnsatisfiedLinkError: oracle/net/common/NetGetEnv.get (Ljava/lang/String ;) Ljava/lang/String;

  at oracle.net.config.Config.getNetDir (unknown Source)

  at oracle.net.config.Config.initConfig (unknown Source)

  to oracle.net.config.Config. < init >(Unknown Source)

  to oracle.sysman.assistants.util.NetworkUtils. < init > (NetworkUtils.java:298)

  to oracle.sysman.assistants.util.step.StepContext. < init > (StepContext.java:388)

  to oracle.sysman.assistants.dbma.backend.CompManager. < init > (CompManager.java:986)

  to oracle.sysman.assistants.dbma.wizard.view.WizardCompManager. < init > (WizardCompManager.java:95)

  at oracle.sysman.assistants.dbma.wizard.view.WizardCompManager.getInstance(WizardCompManager.java:112)

  at oracle.sysman.assistants.dbma.Dbma.getCompManager(Dbma.java:199)

  at oracle.sysman.assistants.dbma.Dbma.execute(Dbma.java:141)

  at oracle.sysman.assistants.dbma.Dbma.statusMain(Dbma.java:241)

  at oracle.sysman.assistants.dbma.Dbma.main (Dbma.java:225)

  Thanks for the reply... I realized I missed a step in the installation of oracle... I've never last updated Port endpoint of e/s in smitty, once I am past that and rebooted, it was good.

• How to generate documentation for ODI 12 c?

  Hello

  How to generate documentation of cards for ODI 12 c?

  Hugs,

  Rafael

  Hello

  Please go through the links below

  Oracle Data Integrator solutions: Generate Documentation of Oracle Data Integrator (ODI)

  http://docs.Oracle.com/CD/E28280_01/integrate.1111/e12643/organizing_documenting.htm#ODIDG517

  Thank you

  Pratik

• Please let me know the weblogic version support for ODI 12 c J2ee ganet

  
  Hello

  I need to install the j2ee for ODI12c agent. I did the instalation for ODI 11 g with weblogic 10.3.5.

  Please suggest me what weblogic version (weblogic 12 c or 10.3.5) for ODI 12 c Java Agent.

  Concerning

  Naren

  Hi 1875213,

  The Certification for the Fusion Middleware 12.1.3 matrix are there: System Configurations supported in Oracle Fusion Middleware

  12.1.3 ODI he supports weblogic 12.1.3.

  Don't forget to close your previous question, if we respond.

  Kind regards

  JeromeFr

• When we have to go for ODI

  Hi all

  I worked in ODI for short time, so I don't know much it. I have a question when someone go for ODI.

  I have a problem I have to recover data of customers and for each customer, I have to send a service request.

  I am confused should I use ODI for that because I think that ODI should not be used for these little problems.

  What do you think?

  If you don't have a single process - to read the customer records and then send some kind of request - then I suggest that you may be able to write a script (for example in Python) to achieve this without the need for an ETL tool.

• Suggestions for best practices for ODI

  Hello
  
  We need some general indications for ODI best practices inplementations, regardless of the design and implementation, etc.
  
  Thanks for your suggestions. :)
  
  Mahesh

  Hello
  This document could be useful for you http://www.oracle.com/technetwork/middleware/data-integrator/overview/odi-bestpractices-datawarehouse-whi-129686.pdf (ODI 10 g)

• Certification for ODI

  Hello
  
  I was just curious to know if there is no accreditation for ODI of Oracle databases, java, etc there?
  
  Thank you
  Mahesh

  In 'Oracle 11 g Essentials (1Z0-515) data warehousing' OWB and ODI review comes as a party under the "Data Integration".

  Take a look.

  http://www.Oracle.com/partners/en/knowledge-zone/database/Oracle-data-warehousing/DW-exam-168611.html

  Thank you
  Fati

• Can I use the same Oracle repository for the new application of FDM

  Hi all
  I have uninstall FDM and install and reconfigure FDM still and then restore FDM Apps present previously.
  
  To do this, I can resue the same Oracle repository for the restoration of the FDM application on newly installed instance.
  
  As far as I know, I need to make the backup of this repository then file repository and create it again and use it for the new application
  
  Please suggest, are there other ways to do this...
  
  Thanks in advance
  
  J

  You can reuse the repository. You will need instead of

• Cannot create domain for ODI

  Hello
  
  I'm trying to create a new domain to the console of the ODI and try to follow the instructions in the post below:
  
  http://odiexperts.com/tag/Oracle-data-integrator-11g
  
  However, when I start the Setup Wizard WLS the second screen does not come upwards with the option for ODI, etc..
  
  Can someone guide me what should I do to display options?
  
  I see only two options outside the base, to select the Source field, namely, Weblogic Advanced Web JAX - RPC ext and JAX - WS services.
  
  It has nothing to do with where is installed the Middleware of home? Because my house of Middleware is located on D:\Oracle\Middleware and ODI is installed on
  
  D:\app\oracle\product\11.1.1\Oracle_ODI_1
  
  I am quite new to Oracle/ODI and absolutely a novice on WLS.
  
  Any help is very appreciated.
  
  Manish

  Large. Please close the message that your problem is solved.

• Utility of creating repository for 64 bit?

  Hi Experts,
  
  I try to install OBIEE 11 g Windows 7 64 bit, I haven't seen any repository for 64-bit Windows utility... can I use 32 bit one? or we have no need for 64-bit? If you have any links where I can find it please let me know, I'm stuck at this point... Please help.
  
  
  Thank you
  DK

  Hi DK,.

  There is not a particular installation of 64-bit. I think it works like this: If you are using a 64 bit JDK application server runs also 64-bit.

  Here you can find the generic jar: http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html and take the generic (http://download.oracle.com/otn/nt/middleware/11g/wls1033_generic.jar)
  You install this by a command like this (it should look at the documentation): java - m wls1033_generic.jar
  Then a Setup program appears.

  It's so my steps:
  -installed RCU
  -installed 64-bit JDK (jdk-6u21-windows - x 64 .exe)
  -Weblogic installation (wls1033_generic.jar)
  -installed OBI 'software only '.
  -configured OBIi (config.bat you can find in \Oracle_BI1\bin)

  All together it takes not much longer then install the 32-bit. Only a few extra steps to do.

  Hope this works for you also.

  Concerning

• Variable repository for the last month

  Hi gurus,
  
  I have a requirement to create a repository for the last month variable first day. We have no dimension of the day.
  
  i, e I should get 1 day last month.
  
  example: today is 29/07/2009 the variable repository should give me on 01/06/2009.
  If I am on 08/01/2009 the repository variable should give me 01/07/2009.
  
  Thanks adavance.

  Hello

  There are several ways to find it,
  The following query in the initialization block gives you the result want.

  Select last_day (add_months (sysdate-2)) + 1 double

  Concerning
  Kishore Guggilla

• Cannot set a specific repository for a machine

  I tried many ways to change/set a specific repository for a specific computer and it always goes back to the original.  I removed from the basic machine (saved restore points) and created a new repository. When I added the rear machine automatically resumed inside the restore points, etc. and back have been started.

  I removed again (guarded restore points), pushed the agent to the machine and selected the new repository and he said the agent on this computer is the same as the agent on this computer and reset it with the changes. Rebooted the machine.  However, he still picked up points of restoration on the core and attached to the old repository.

  I tried a total of 5 different ways to get this machine to see a new repository, but no luck.  The only thing I did is remove the machine & points of restoration out of the nucleus and the Constable and I tried.   Archiving is a joke to say the least and takes 20 hours to around 2.2 to has failed or * the rest of the system (as he did last night).

  I used several different backup systems, but AppAssure is by far the worst, slower and less reliable I've seen.  Even my old band system Veritas has been 100% reliable and I spent less time to manage.

  I'm only protect three machines on it so it can't be that difficult.  Any thoughts?

  Thank you. Russ

  Hi Russ,

  AppAssure has a relationship one between the agent and the repository.  You can have data from an agent in a repository at the same time.  Because Wes pointed out you can follow this KB support.software.dell.com/.../117750 . to migrate from the agent and he gave repo from one to the other.

  There is another option to move an agent to a new repository.  You can change the Unique ID of the Agent and then restore it.  By doing this, the kernel will see it as a new agent and allow you to define any repository on your heart, as is the master repository.  If you take this approach, you can keep the old restore points for the agent in the first repository and have all new backups to go to the new repository. Please note that you can never match these two sets of recovery points together once again, because the kernel identifies as a different agent data.  Then they will be displayed always separately.

  To make this change:

  1. Change the display name of the current agent to something different (usually I just add - old for it)
  2. Stop the agent service
  3. On the agent, remove the HKEY_LOCAL_MACHINE\SOFTWARE\AppRecovery\Agent\AgentId registry key
  4. Start the agent service and the registry key and the subkeys will be regenerated
  5. Run the wizard of protection on the basis of protecting agent and be sure to select the right repository
  6. Delete the former agent of protection and keep the recovery points
  7. You have now - former agents like recovery Points only and agent under protection.  A new base image is taken as there is still no data for this agent, but once the base is taken all subsequent backups should be incremental.

  As for your statement about archiving is a joke, I would need to learn more about your configuration to make a statement. What storage do you use for your storage space?  What speed, the size and the number of disks are used?  What RAID configuration? Is it directly attached, NAS or CIFS? Personally, I always found AppAssure as reliable when repository storage is reliable.  Regarding speed, AppAssure runs how fast on your database server resources are capable. I saw TB of data archived in just a few hours.  I've also seen take days.  It depends on the material used.

  Tim

• Repository for the ODI work discount

  Hello
  
  I would like to 'Refresh' of my filing work dev with what is in production.
  
  Can anyone tell me the best way to blow the current models of projects/data etc and create a repository of costs by using the same SQL Server database? Number of objects have different IDS between the environments. So, once I have the shell, I want to start by importing the production in synonymous fashion.
  
  I can run the migration of objects, but need advice on how to clear the SQL repository.
  
  See you soon

  Remove the SQL Server tables, recreate your rest work by ODI Studio (with a different ID to the production) and import away...

• Repository for all users connection

  Hello
  
  I have following question. I ODI studio installed on a machine. Many users use this remote machine via Office.
  I created repository connection and I can't connect a. However, other users of this PC so try to connect to the repository do not this connection in the connection name list and can not connect. How vissible to all users? I can't create a repository connection on all of their user accounts and do not want to share the maste password repository db.
  
  Best regards
  Greg

  Why don't you share the file snps_login_work.xml to everyone and tell hem to put in the userlib directory. Each user has many record userlib.

  For XP: C:\Documents and Settings\nom_utilisateur\Application Data\odi\oracledi
  For W7: C:\Users\USER_NAME\AppData\Roaming\odi\oracledi\userlib

  http://dwteam.in/security-concern-with-ODI-snps_login_work-XML/

• Installing the remote control for ODI

  Hello
  
  IAM, creating repositories using RCU.bat.
  
  http://docs.Oracle.com/CD/E14571_01/core.1111/e16453/install.htm#CHDFIECA
  
  to 'Figure 2-2 deposit creation utility Custom Variables screen' step
  
  I provided the supervisor password like ODI12345 and also the same for the repository of work too... and installed it successfully
  
  But while configuration ODI and become step 'configure repository '... I mentioned such details as SUPERVISOR
  
  ODI username: SUPERVISOR (default)
  ODI password: ODI12345 (as above)
  
  but in error as no references where am doing wrong, please help me
  
  Thank you very much

  Hello

  Because if you gave work repository password as ODI12345, and then re-ran RCU and remove the table from the ODI (table DEV_ODI_REPO) and re-create the ODI repository with password SUNOPSIS using RCU

  This day there you will get no error because SUNOPSIS is a standard password for user SUPERVISOR

  Kind regards
  Panikanth

  Published by: Phanikanth on December 22, 2011 04:55