Repository for the ODI work discount

Similar Questions

• Profile of user runs as an administrator for the daily work and this account is corrupt and switch every time on a portable temporary file is opened (created)

  User profile runs as an administrator for the daily work and this account is corrupted and switch every time on my laptop, just open a temp file (created), I downloaded a driver to run my cell phone as a modem while he is on vacation. and the problem started after downloading this software,

  Hi johnnyroque

  Thanks for posting on Microsoft Answers.

  Try to use the following steps to enable the built-in Administrator account and further, then the steps and links to fix a corrupted profile.

  Please start on the mode of the Windows recovery environment (WINRE).

  -To start the computer into WinRE mode, insert the Vista CD in the CD tray, restart the computer.
  -When you are prompted to "press any key to boot from the CD-ROM..." Press ENTER.
  -Select the language by default, click Next.
  -Select "repair your computer".
  http://www.Flickr.com/photos/freeed/363935713/in/set-72157594490796701/
  -Select command prompt, and then type the following commands:

  NET user administrator / Active: Yes
  NET user {user account name} {new user password}

  Note: Please enter the user name and the password without the braces of the flower.
  
  -Restart the computer normally.

  //////////////////////////////////////////////////////////////////////////////

  To fix a see corrupted profile link below:
  http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Please post back and let us know if it helped to solve the problem - thanks Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I tried to delete some unused programs of my had drive and the PC deleted wlidcl.dll. How can I get this program for the PC works as before?

  I tried to delete some unused programs of my had drive and cleared PC wlidcl.dll How can I get this program for the PC works as before? The PC works now as slow as a snail climbs.  What do you suggest me? Thank you

  Norman.--

  E-mail address is removed from the privacy *.

  original title: wlidcl.dll

  Hello

  I suggest to follow the steps below and check if the problem persists:

  Not one:

  Uninstall Windows Live essentials followed the procedure described in the link:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Step b:

  Download and install Windows Live essential from the link:

  http://explore.live.com/Windows-Live-Essentials?OS=other

• Can I use the same Oracle repository for the new application of FDM

  Hi all
  I have uninstall FDM and install and reconfigure FDM still and then restore FDM Apps present previously.
  
  To do this, I can resue the same Oracle repository for the restoration of the FDM application on newly installed instance.
  
  As far as I know, I need to make the backup of this repository then file repository and create it again and use it for the new application
  
  Please suggest, are there other ways to do this...
  
  Thanks in advance
  
  J

  You can reuse the repository. You will need instead of

• I'm looking for the 1st working day of the week.

  Hello
  
  I'm looking for the 1st working day of the week except Saturday, Sunday and holidays. I have vacation, the name of the table that contains the columns HolidayDate and HolidayDescription.
  
  Ex:
  
  01/10/2011 is monday (i.e) 1st company day.check if it is in the host table, then return the result as 01/11/2011 other returns the output as a 11-1-2011(which is the first business day of this week).
  
  
  Can someone tell me the query to solve?

  Hello

  If dt is any DATE, it is the first day of work in the same week as dt:

  WITH     all_week     AS
  (
       SELECT     TRUNC (dt, 'IW') + LEVEL - 1     AS a_dt
       FROM     dual
       CONNECT BY     LEVEL <= 5
  )
  SELECT     MIN (a_dt)     AS first_work_dt
  FROM     all_week
  WHERE     a_dt     NOT IN (
                    SELECT  holiday_dt
                    FROM    holiday
                   )
  ;
  

  This assumes that you have never 5 consecutive days. (Where I work, holidays are always at least a week apart, so that's fine.)
  If you have a week's holiday, increase the number of 'magical' in the CONNECT BY clause.

  It also means that holiday.holiday_dt = TRUNC (holiday.holiday.dt).

• Variable repository for the last month

  Hi gurus,
  
  I have a requirement to create a repository for the last month variable first day. We have no dimension of the day.
  
  i, e I should get 1 day last month.
  
  example: today is 29/07/2009 the variable repository should give me on 01/06/2009.
  If I am on 08/01/2009 the repository variable should give me 01/07/2009.
  
  Thanks adavance.

  Hello

  There are several ways to find it,
  The following query in the initialization block gives you the result want.

  Select last_day (add_months (sysdate-2)) + 1 double

  Concerning
  Kishore Guggilla

• Keyboard shortcuts for the buttons works irregularly - why?

  When you use the access key for the button attributes, they work sometimes and not others. Three behaviors are observed:

  -use the accesskey times moves the focus and click on the button (correct behavior)

  -use the access key moves the focus only - do not by clicking on the button

  -use the accesskey does nothing

  These problems occur without change installation, restart, etc..

  What could cause this?

  Moreover, 3.6.28 works very well with the exact same web application.

  It might be useful to have a small script for conducting a census of the keyboard shortcuts page. You can open the web console (Ctrl + Shift + k), paste the following options next to the circumflex accent ("' >" ") and press ENTER. A new element is added at the end of the body with the results.

  var aks=document.querySelectorAll("a[accesskey], button[accesskey], input[accesskey]"); var out=document.createElement("pre"); for(var i=0; i<aks.length; i++) out.appendChild(document.createTextNode("Tag:'"+aks[i].nodeName+"'; id:'"+aks[i].id+"'; name:'"+aks[i].name+"'; key:'"+aks[i].getAttribute("accesskey")+"'\n")); document.body.appendChild(out);
  

• Will be a docking station for the earlier works to connect with the lighting cable, if I have a match?

  I have a really great dock I want to use it with my new iPhone. but he has the old type of connector. If I buy an adapter, it will only load, or it will play music from the phone as well?

  If you buy an authentic Apple adapter, this should work, although I saw some errors with a 30-pin lamp CAP in my car for the connection of the iPod.

• k8u03pa #acj: the drivers to install for the best work

  I just bought a new laptop and got installed in windows (Win 7 64 bit). I want to know that all drivers should I download to make it work at its optimal performance. There are many big here and all good pilots. But I don't want to spoil things. So, I want to notice. Help, please!

  Thanks in advance

  PRK.

  prakhar_93 wrote:

  I just bought a new laptop and got installed in windows (Win 7 64 bit). I want to know that all drivers should I download to make it work at its optimal performance. There are many big here and all good pilots. But I don't want to spoil things. So, I want to notice. Help, please!

  Thanks in advance

  PRK.

  Hello

  Get the latest version (look for the last date that it has been updated) the necessary drivers.

  Try to download, save & install them in the following order:

  First-

  Driver and Intel Chipset Installation utility

• Full screen for the entire work area (not 1 module)

  Hi guys,.

  Is it possible to activate the mode full-screen for the work in first Pro CC, as well as Shift + F area how for Lightroom? Tilde and ctrl + tilde does full-screen for the selected module. I want just the complete workspace in sight.

  CTRL + \.

• is it to qualify for the Malaysian student discount?

  To QUALIFY FOR the Malaysian students?

  Hello

  Yes, the student & teacher discount is available in Malaysia.

  Go directly to the store URL here - http://shop.adobe.com/store/adbestap/list/categoryID.63641600/ThemeID.30575200?id=HomeOffe rsPage & SiteID = adbestap

  ^ Ani

• Solution for the ODI function call

  Hi Experts,

  I'm using ODI 11 g.

  Currently I use oracle procedures to call a function in ODI.

  just like "Select package_name.function_name from dual" I use this query in the variables of ODI. The output of the function
  I use in the mails from the ODI.

  So, for this... Assume that for any change that I have to go to an Oracle package and change the logic of operation... and then promote this
  production... which takes a moment for me.

  So I want to write this function inside the variable of the ODI and send the output to mail ODI... While I don't need DB side to promote
  the production code on all the changes.

  Please let me know if this solution is good or not.

  
  Thank you
  Lony

  Hello

  in my opinion is good have any logic inside the ODI. But it depends on the complexity of the logic and the frequency of your change. If you change the logic once for the year, it is completely unnecessary to do inside your ODI.

  A good compromise would be to put a step in package_name.function_name in your parcel.

• Location of the repository for the link (EAL) Essbase Analytics settings?

  In Essbase Analytics link (EAL), where are the Repository EAL parameters stored?  I think I saw a param or .ini file, but I can't seem to locate it in the application directory.  I try to find it, because I've reconfigured EAL to use another database for the repository, but that it always points to the original database in spite of what the configuration tool shows.

  You must update the JDBC information stored in WebLogic if the web application is not redeployed, you can change the source of data through the weblogic administration console or go to \user_projects\domains\EPMSystem\config\jdbc\EAL_Repository-xxxx-jdbc.xml

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• How to pass variables to repository for the title of obiee 11 g

  all I am trying to create a reprot and format of this report is
  
  TEST REPORT
  range of month: 04/01/2012-04/30/2012.
  
  How can we get this date range in view of the title.
  Any suggestions?

  Hello

  For session variables:
  @{biServer.variables ['NQ_SESSION.variablename']}

  For variables of repository:
  @{biServer.variables ["variablename"]}

  Try this syntax in the view title it should work.

• Recurring problems with flash, please help Urgent for the University works

  Hello, Im having problems, my 1st chassis code is

  Stop();
  import flash.events.MouseEvent;
  sync_btn.addEventListener (MouseEvent.CLICK, onClick);

  function onClick (e:MouseEvent): void {}
  gotoAndStop (2);
  }

  This seems to work very well and get my in box 2, which is where I have problems, my goal is to make a button to proceed and a button to return to the first image I p much copied what you used.

  Stop();
  SyncMusic_btn.addEventListener (MouseEvent.MOUSE_DOWN, mouseDownHandler1);
  function mouseDownHandler1(event:MouseEvent):void {}
  gotoAndStop (3);
  }

  BktoConfig_btn.addEventListener (MouseEvent.MOUSE_DOWN, mouseDownHandler2);
  function mouseDownHandler2(event:MouseEvent):void {}
  gotoAndStop (1);
  }

  Instance names were copied directly from where I named them so they're right, it makes me crazy because ive been working in cs5.5 in college and on cs4 at home and my cs4 does not work my cs5.5 work, that I had made a start on (when it worked)
  I get the error message:

  TypeError: Error #1009: cannot access a property or method of a null object reference.
  at Untitled_fla::MainTimeline/frame2()
  at flash.display::MovieClip/gotoAndStop()
  at Untitled_fla::MainTimeline/onClick()

  And the button will back does not work, Im urgently need help because this assignment is due next week, and Ive been working on it for at least 2 weeks now and nothing I can seems to work.

  1009 error indicates that one of the objects targeted by your code are out of reach.  This may mean that the object...

  n ' is not in the display list

  n ' is not have an instance name (or the name of the instance is misspelled)

  n ' is not in the frame where this code tries to talk to her

  -is animated in place, but is not assigned the name of the instances of each keyframe for her

  -is one of the two or more consecutive keyframes of the same objects without a name assigned in the image previous (s).

  If you go to your section to publish the Flash settings and select permit debugging option, your error message should have a suite of line number the number of the frame that will help you to isolate the object that is involved.