Example: HP251-105: new tower with old monitor

Similar Questions

• New XPS13 with external monitor is not able to get plenty of 3840 x 2160 at 60 fps

  I bought this monitor and cable.  For some reason, I can't get resolution of 2560 x 1440. If I use a docking station and display port go to display port I get 3840 x 2160, but at 30 fps.

  In case it makes a difference - I upgraded to win 10 Technical preview (from 8.1 to Windows that has been installed in the factory).

  Any ideas on what could be bad?

  Thank you

  .. Paresh...

  Hello

  The above is not correct because have now the external monitor works to full 3840 x 2160 @ 60 Hz but I couldn't do it by using one of the Dell accessories (i.e. mini-Display port, HDMI, or VGA adapter).

  I had to buy a new mini-Display port display cable for port - I went with this an Alogic brand (search Alogic Mini Display Port) to display port v1.2.

  The important thing is that it must be version 1.2 or the forthcoming 1.3.  I tried initially a ver1.1 and conly only to 3840 x 2160 @ 30 Hz which looked terrible.  There was also a setting on my screen so that it's new, it was a cable versus v1.1 v1.2.

  Everything works fine.  I think what I've discovered, is that an HDMI cable cannot physically handle the volume of data required to drive a monitor UHD.

  For anyone that mentions windows versions - I'm on 8.1 and drivers were very good.

  Hope that helps.

  L

• Get "Licensing for this product has stopped working" error on my new Mac with old Adobe software

  Hi people, recently I bought a new machine and can not work how to get Illustrator cs3 or photoshop cs5 working on it...

  Photoshop says "license for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contact your COMPUTER administrator or Adobe customer support for help", which is strange, as they say some different before I tried to ask adobe support about this...

  Illustrator, said the same thing.

  customer support said that I have to ask here because they cannot provide support for these products.

  First, you try to use a very old product on the latest operating system. So, who can create problems.

  CS3 has never been tested with Mac 10.9. Thus, it may or may not work. You can always give it a try.

  CS5 should work well on Mac 10.9.

  Speaking of the license error, now seems that you have backed up your data using Time Machine from your old Mac and who have restored this new Mac. If so, which damaged the licenses of Adobe products.

  This should help. Error "Licensing has stopped working". Mac OS

  Let me know how it goes.

  ~ David

• New remote with old iMac?

  Can I use the new Apple Remote (from the new Apple TV) with my iMac G3/500 DV - SE running 10.4.11?

  Yes, you can control the music on your iMac with the remote control of Siri.

• Create new project with old project vi

  So I have this 'project' I have worked since for quite awhile. I know I couldn't do it, but to save time, I reused a lot of code from the original project for a few other tests. So I just continued to add directories to this project.

  Now I need to take some of the best level vi and make a separate project, so I can store the source with the other files on our network in real engineering project folder.

  The high level vi is easy, but how do I make sure I get all down level vi and dependencies?

  I mean besides from the top level and moving it, then run to see what is missing?

  Is there an easy way?

  Use a 'Source' Distribution in the project that contains the high level of page VI (s) and configure it to "preserve the hiarchy."

  When the distribution the rest it will pick up the upper level screw and and all the screws under move them to the new location and link to point to the new location.

  Ben

• Installation on a new computer with old serial numbers

  So I had to CS6 Production Premium installed on some older computers, which now do not work. I want to install on my new computer, but the serial numbers have obviously been used. How can I reinstall it? Please help because Adobe is absolutely terrible to provide assistance.

  If you have used both your authorized activations and you are not able to disable this function on non-working computers, you will need to contact Adobe directly for your activation Reset counter

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• New Essbase with old Informatica

  Hi guys,.
  
  Is it possible to use Informatica Power Center 8.1.1 with new version of Essbase (11.1.2.2)?
  
  Best regards
  Greg

  The latest adapters released for SUN (Power Center 8.1.1 SP3) were 11.1.1.1 but I believe that they still work with 11.1.2.2, you probably also updated the essbase client as well as the latest version on the SUN server.
  Should also be worth to ODI if possible like SUN is really a dead product with Oracle.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• dc5850: DC5850-SFF transfer to a new tower/case components

  I have a HP DC5850 SFF and I am wanting to transfer all the internal elements to a new tower with a new power supply.   This motherboard will be mounted in an ATX case?

  Hello

  What is your plan to manage the connections of propriety feeding?

• I have a problem of my catalogs of PES 10 displacement and the photos attached from my old computer with Windows XP on my new computer with Windows 10.  The problem is that I can't remember the arrangement of the original tree of my photo folders when I r

  I have a problem of my catalogs of PES 10 displacement and the photos attached from my old computer with Windows XP on my new computer with Windows 10.  How can I keep my original photo folders tree arrangement when I restore backups of catalog on the new machine?

  The problem arises because Windows 10 is equipped with a new tree structure with new names for many of its branches.  Tree of Windows XP starts to Local Disk (C), and then does the following: Documents and settings, Susan [it's me the user], My Documents, SusanPhotos (the folder that I created that contains my photos) and then several subfolders and subfolders with my photos grouped by theme, for example the Puglia Italy and Italy-Roma.  My new computer Windows 10 has a different tree and different names for a large number of branches from early on: OS (C) [instead of Local Disk (C)], users, Susan, Documents [instead of the old My Documents], SusanPhotos [what I created] and then the subfolders and so on.

  Because of the new tree and the new names of the branch, I can't find a way to restore my PES 10 catalogues and photos attached to them to where I want to that they.  What I want to do is put the files from SusanPhotos to the Windows 10 Documents folder so that I find myself with the following tree, essentially the same as what I had on my old machine: OS (C), users, Documents, Susan, SusanPhotos, then the original subfolders with my photos.  Apparently 10 PSE does not allow me to move folders of photos in the Organizer, so that the pictures stay connected.

  PES 10 offers 3 options for restoration: Original, personalized and customized, keeping the original structure of the file.  Here's what happens to each:

  (1) original creates new folders with the old names and the structure of the tree, parallel to the tree Windows 10 has instead of inside the tree Windows 10.

  (2) custom with the original structure of the file is the restaurant where I want (within the SusanPhotos) but retains all branches superfluous-instant initial tree of Windows XP, production: BONES (C), users, Documents, Susan, SusanPhotos, Documents and settings [carried over from the old computer], Susan, My Documents, SusanPhotos, Roma-Italy and Italy-Puglia and so on.

  (3) custom (without checking the original file structure box) makes every SusanPhotos but without any organization: OS (C),..., SusanPhotos, Italy-Puglia and Italy-Roma and all other folders at the same level instead of in their original nested groups with subfolders.

  The first two methods you end up with a tree that is chaotic with two parallel trunks or a single trunk but with several redundant layers carried over from the old computer.  The third ends with no tree at all.

  One solution would be to make a Custom Restore with the original structure of the file and then use PSE10 to move the folders that I would like.  However, AFAIK, PSE10 I cannot move entire folders of photos, only of individual pictures.  With thousands of photos in hundreds of cases, the time required for the movement of individual pictures is prohibitive.  PSE10 allows me to move the catalog folder, but apparently not the folders containing the photos.

  The result is that at this time I have no solution to my problem.  Can you help me find a way to restore my photos while keeping their original organization?

  One solution would be to make a Custom Restore with the original structure of the file and then use PSE10 to move the folders that I would like.  However, AFAIK, PSE10 I cannot move entire folders of photos, only of individual pictures.

  You simply use the 'Files' Panel on the left. Your folder tree appears. Simply, you drag and drop the folder to move with all its subfolders in the desired master file. That works exactly as in Solution Explorer, so be patient, you receive no message of progress until it is completed.

  You did a good job to understand the situation. I think that might help you is to understand that changes in the way default folders are created in a different version of Windows can be ignored if you do not use these structure 'default', from the shortcuts to your main folder of the user.

  I create a master folder 'My Photos' directly under the C: root.

  When I restore, I use the "custom" choice, as you have discovered, I only specify this folder in the restore process, and I completely ignore the default shortcuts to 'Documents' or 'Image '.

• How to compare the new values with the old values in triggers.

  Dear all,
  
  Please tell me how to compare the new values with the old values in triggers.

  Hi, the employee example is in the document. You'd better read yourself.

  CREATE OR REPLACE TRIGGER Print_salary_changes
    BEFORE DELETE OR INSERT OR UPDATE ON Emp_tab
    FOR EACH ROW
  WHEN (new.Empno > 0)
  DECLARE
      sal_diff number;
  BEGIN
      sal_diff  := :new.sal  - :old.sal;
      dbms_output.put('Old salary: ' || :old.sal);
      dbms_output.put('  New salary: ' || :new.sal);
      dbms_output.put_line('  Difference ' || sal_diff);
  END;
  /
  

• I am trying to connect a Macbook Pro with Retina display for a new monitor Dell Ultrasharp 3014. I tried to connect via HDMI and DVI cable supplied with the monitor but the monitor says "no cable dvi - d".

  How to connect a Macbook Pro with the (just bought) Retina display for a Dell Ultrasharp U3014's new? I tried to connect with HDMI and DVI cable supplied with the monitor but the monitor says "no dvi - d" cable. I never tried to do that before so I'm lost.

  Use a mini-displayport cable. Connect to one of the ports Thunderbolt the MacBook Pro to ultra-compact monitor entry.

• Just bought a new computer. an old crashed. How can I sync my iphone with the new computer?

  just bought a new computer. an old crashed. How can I sync my iphone with the new computer?

  Original title: sync

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• have xp backup file of the old pc would like to put on new pc with vista, how can I do?

  have xp backup file of the old pc would like to put on new pc with vista, how can I do?

  Vista backup and restore tools are distinguished by the backup program provided with Windows XP and if the backup files would be incompatible.

  Perhaps you should look at is:

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-transferring-files-and-settings-from-another-computer
  You can transfer files and settings from one Windows computer to another by using a calledWindows Easy Transfer tool. To use this tool, your computer must be runningWindows 2000, Windows XP or Windows Vista, and your new computer must be Vista runningWindows.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Try to format and do a clean install of Windows Vista on an old my computer HARD drive at home to be placed in a new Tower. The installation does not start.

  Try to format and do a clean install of Vitsa on an old my computer HARD drive at home to be placed in a new Tower. DVD starts up fine and then goes into an endless loop of the repair system that continues to check the c: / drive to find errors. Why is the installation does not start? I know that the folder c: / drive has Vista OS on it from my old compuetr. I want to wipe off immediately and start cleaning up.

  original title: try to install clean vista

  You must set your BIOS to start on the DVD from the beginning to the top.

  You have a good DVD of Vista (OEM/upgrade or full version) and NOT only a recovery disk provided by the manufacturer of the PC (or you burn you).

  For a DVD upgrade, follow the method here and make sure you format your HARD drive thanks to the tools of "advanced install" on the DVD.

  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  If you have a full version of Vista rather than a version upgrade then just do the first part of the above procedure.

• New PC with Windows 7 and a 'old' and apparently compatible, Canon scanner LIDE 90.

  New PC with Windows 7 and an 'old' Canon scanner LIDE 90.  Compatibility of Windows gives the all clear gun site, but I'm unable to operate as Twain cannot be opened "following all my attempts to load after several uninstalls. Whatever Windows compatibility assurance, I downloaded a driver from their site, but nothing helped. Is it me?

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner