New Essbase with old Informatica

Similar Questions

• Get "Licensing for this product has stopped working" error on my new Mac with old Adobe software

  Hi people, recently I bought a new machine and can not work how to get Illustrator cs3 or photoshop cs5 working on it...

  Photoshop says "license for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contact your COMPUTER administrator or Adobe customer support for help", which is strange, as they say some different before I tried to ask adobe support about this...

  Illustrator, said the same thing.

  customer support said that I have to ask here because they cannot provide support for these products.

  First, you try to use a very old product on the latest operating system. So, who can create problems.

  CS3 has never been tested with Mac 10.9. Thus, it may or may not work. You can always give it a try.

  CS5 should work well on Mac 10.9.

  Speaking of the license error, now seems that you have backed up your data using Time Machine from your old Mac and who have restored this new Mac. If so, which damaged the licenses of Adobe products.

  This should help. Error "Licensing has stopped working". Mac OS

  Let me know how it goes.

  ~ David

• New remote with old iMac?

  Can I use the new Apple Remote (from the new Apple TV) with my iMac G3/500 DV - SE running 10.4.11?

  Yes, you can control the music on your iMac with the remote control of Siri.

• Create new project with old project vi

  So I have this 'project' I have worked since for quite awhile. I know I couldn't do it, but to save time, I reused a lot of code from the original project for a few other tests. So I just continued to add directories to this project.

  Now I need to take some of the best level vi and make a separate project, so I can store the source with the other files on our network in real engineering project folder.

  The high level vi is easy, but how do I make sure I get all down level vi and dependencies?

  I mean besides from the top level and moving it, then run to see what is missing?

  Is there an easy way?

  Use a 'Source' Distribution in the project that contains the high level of page VI (s) and configure it to "preserve the hiarchy."

  When the distribution the rest it will pick up the upper level screw and and all the screws under move them to the new location and link to point to the new location.

  Ben

• Installation on a new computer with old serial numbers

  So I had to CS6 Production Premium installed on some older computers, which now do not work. I want to install on my new computer, but the serial numbers have obviously been used. How can I reinstall it? Please help because Adobe is absolutely terrible to provide assistance.

  If you have used both your authorized activations and you are not able to disable this function on non-working computers, you will need to contact Adobe directly for your activation Reset counter

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• Example: HP251-105: new tower with old monitor

  I bought a new hp251-105 a round running Windows 10.  I use my hp ZR30w monitor.  After all the fine tuning display it is always pixelated.  I have to change my graphics card?  I love my big monitor, I read a lot of architectural drawings.  Appreciate any comment.

  Hello

  No driver available for Windows 10:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4194579

  Please try drivers for Windows 8 or 8.1

  Good luck.

• Just bought a new computer. an old crashed. How can I sync my iphone with the new computer?

  just bought a new computer. an old crashed. How can I sync my iphone with the new computer?

  Original title: sync

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• have xp backup file of the old pc would like to put on new pc with vista, how can I do?

  have xp backup file of the old pc would like to put on new pc with vista, how can I do?

  Vista backup and restore tools are distinguished by the backup program provided with Windows XP and if the backup files would be incompatible.

  Perhaps you should look at is:

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-transferring-files-and-settings-from-another-computer
  You can transfer files and settings from one Windows computer to another by using a calledWindows Easy Transfer tool. To use this tool, your computer must be runningWindows 2000, Windows XP or Windows Vista, and your new computer must be Vista runningWindows.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• New PC with Windows 7 and a 'old' and apparently compatible, Canon scanner LIDE 90.

  New PC with Windows 7 and an 'old' Canon scanner LIDE 90.  Compatibility of Windows gives the all clear gun site, but I'm unable to operate as Twain cannot be opened "following all my attempts to load after several uninstalls. Whatever Windows compatibility assurance, I downloaded a driver from their site, but nothing helped. Is it me?

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Migrate Windows XP to Windows 7 with old C: drive with new C: drive

  Help is requested for the following migration.

  Current configuration:

  • C: drive 34 GB PATA HDD<-- old="" hdd="" (with="" windows="" xp="">
  • D: CD/DVD disk drive
  • E: drive 425 GB (data) (1 of 2) partition on 500 GB SATA HDD
  • F: drive 40 GB (vacuum, bootable) partition (2 of 2) on 500 GB SATA HDD

  The target configuration:

  • C: disk 500 GB (bootable) partition (1 on 1) on 500 GB SATA HDD<-- new="" hdd="" (with="" windows="" 7="">
  • D: CD/DVD disk drive
  • E: drive 500 GB (data) (1 of 1) partition on 500 GB SATA HDD

  Process of :

  1. Current configuration running on Windows XP, clone Windows XP for drive F:
  2. Remove and uninstall PATA HDD (old drive c :))
  3. Install Windows 7 Upgrade (clean install) on Windows XP on drive F:
  4. Install a new HDD SATA (new drive c :))
  5. (Now have the target hardware running Windows 7.)
  6. Clone Windows 7 drive C: to F: drive
  7. Remove partition 2 (drive F :) to create the partition (drive E :) of 465 GB (data)
  8. (I've already migrated a disk HARD SATA 2 x 500 GB Windows XP system to Windows 7, so I am familiar with the necessary details of process level below).

  Issues related to the:

  1. This process works?
  2. Maybe the step 2 of the process should follow step 3?
  3. If this process is going to work, it is recommended to perform all actions of clone?
  4. If this process doesn't work, what is the recommended procedure?

  Thanks for the help and support!

  Sincerely,

  Stripeman

  Hello

  Thank you for your response.

  I wish to inform you that you will not be able to move from Xp to Windows 7. It has a Custom
  install.

  See upgrade paths

   

  Windows 7 upgrade paths

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

   

  Installing and reinstalling Windows

  http://Windows.Microsoft.com/en-CA/Windows/installing-reinstalling-Windows#1TC=Windows-7
  You can refer to step 2 ( move files and settings and collect your )
  ( program records) link and check if that helps following:
  Upgrade Windows XP to Windows 7
  http://Windows.Microsoft.com/en-in/Windows7/help/upgrading-from-Windows-XP-to-Windows-7#T1=Tab03
   
  I hope this helps.

• Old broken computer and new computer with Windows 7, cannot load the Office 2003 old Pro upgrade. Any help out there?

  Due to a computer crash (bought in 2004 with Windows xp and Office 2003 Professional), I bought a new one with Windows 7 and I try to install my old version of Microsoft Office 2003 Pro (bought around 2004 update).  However the installation process does not recognize the older versions of Office (which were on my old machine and allowed me to exploit OP 2003).  Is it possible to load my OP03 bought and already active on my new computer?

  According to this page, it can be used as a product calling it:
  http://Office.Microsoft.com/en-us/suites/FX101754511033.aspx

  According to amazon.com, work 8 should also be eligible:

  Upgrade eligibility

  Determine if your current version of Microsoft Office qualifies you for the upgrade price. The following products are eligible:

  • Microsoft Office XP: Developer of Office XP, Office XP Professional with FrontPage, Office XP Professional Special edition, Office XP Professional with Publisher, Office XP Professional, Office XP Small Business Edition, Office XP Standard
  • Microsoft Office 2000: Office 2000 Developer, Office 2000 Premium, Office 2000 Professional, Office 2000 Small Business Edition, Office 2000 Standard
  • Microsoft Office 97: Office 97 Professional, Office 97 Small Business Edition (version 2), Office 97 Small Business Edition (version 1), Office 97 Standard
  • Microsoft Works: Works Suite 20061, Works Suite 2004, Works Suite 2003, Works Suite 2002, Works Suite 2001, Works 2000, Works 8.0, Works 7.0, Works 6.0

  Try saving to see if she will recognize. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• Windows Easy Transfer will not work for me between my old laptop with Windows XP and my new laptop with Windows 7.

  I am trying to transfer my files to my new laptop with Windows 7 for my old laptop with Windows XP Professional, using the Windows Easy Transfer, that I found on my old laptop.   I tried to make the transfer through my home wireless network and when that did not work...  I connected the two laptops with a cable (the same style of cable, used to connect his computer to a modem or router, not a cable SSB).

  So in summary, I just want to transfer all my files from my old laptop to my new laptop.   I copied the master file of my data from my old laptop on a "stick" assuming that I could download just to stick to the new laptop.  (I have a lot of "sticks" here.)   The idea did not work, of course, results otherwise wouldn't ask this question now.

  If you had previously copied simply data (documents folders) via a key files should be no problem during the copying of that stick to the library on win7 locations, and is there's this which is exactly the err MSG?

• Group residential with old computer as a server, want to set up the new homegroup

  I had a group residential, put in place with an old computer is no longer used. How can I do die so I can put in place a new homegroup with another computer as a server/administrator?

  Hello

  As long as a single computer is configured to use the homegroup, other computers should still be able to join. Homegroup is not dependent on the computer that originally created it.

  If you want to recreate if you have fair to all other computers is to leave the Group residential then they will be able to create again.

  Why I can't join a homegroup?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-join-a-HomeGroup

  Homegroup: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

• Hello, my computer down and I bought another. How can I install Adobe Acrobat XI pro on the new computer with my license? In fact, it's already used with my old computer which is broken...?

  Hello, my computer down and I bought another. How can I install Adobe Acrobat XI pro on the new computer with my license? In fact, it's already used with my old computer which is broken...? !

  you are allowed to two facilities/activations.  If you want / need to restore those, contact adobe support and application and activation count reset.

  Use a browser that allows cookies and pop-up windows, please contact adobe for hourly pst support by clicking here and, when it is available, click "still need help," https://helpx.adobe.com/contact.html

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 pro extended exe,7z extended pro 9 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6,7. 5.7.1|  4.4 | 3.6
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• I have a new computer with Windows 10 and will use Acrobat 9.0 Standard of my old computer (Windows 7). I download the program for Adpbe and when I install it so I put my serial number and get the answer, it is not a number valid serial. What it takes

  I have a new computer with Windows 10 and I use Acrobat 9.0 Standard of my old computer (Windows 7). I download the program from Adobe, and when I install it then I put my serial number and get the response "is not a number valid serial. What should do? I have an account at Adobe with all my serial number

  Hi rolfb13339293,

  I would like to inform you that acrobat 9 is not compatible with windows 10.

  You can check system requirements here: Adobe Acrobat required configuration

  The latest version is Acrobat DC.

  Please let us know if you need additional assistance.

  Concerning

  Sarojini