Example of authentication WEP

Similar Questions

• Authentication problem in example of java PAPI for BPM 10 g R3

  Hi people,
  
  I try to run the Group PAPI Java example but encountered the following error:
  
  {color: #ff0000} Java Cannot perform the requested operation
  Retrieved from " java ". OperationException_Exception: Participant could not be authenticated. A bad user name or password may have been specified.
  java at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (NativeMethod)
  java at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
  {color}
  . According to sources java the example uses authentication profile name token of the user with the login = test credentials and password = test.
  
  It doesn't seem to be an attribute of password for Participants, so I'm not able to create such a user in the process.
  
  Really appreciated your advice and counsel. Thank you
  
  see you soon,
  JM
  
  
  PS: My settings in the Console of Services Web BPM are:
  
  Style: Document literal wrapped
  SSO Enabled: false
  WS-Security UsernameToken Profile Authentication Enabled: true
  HTTP enabled basic authentication: false
  Preset of Authentication Enabled: false
  MTOM optimization for attachments Enabled *: false
  Endpoint: [http://au1r20080nb:8585/papiws/PapiWebServiceEndpoint]
  WSDL: [http://au1r20080nb:8585/papiws/PapiWebServiceEndpoint? wsdl]
  
  Published by: user831710 on January 7, 2009 20:07
  
  Published by: user831710 on January 7, 2009 20:09

  As far as I know, for BPM Studio, participants are not passwords. You will need to modify your example to have the password as «»
  Alternatively, deploy your BPM processes in the company and create a test/test user

  HTH
  Simart

• Example of application using json or xml

  Hello

  I am new to blackberry. can any body have examples of connection authentication code, in which we pass user name and password, once we get respone in json or xml.

  If sombody have runing code please help me...

  Mr President, in fact, I know there are two type of request is GET and other POSITIONS. In both we get respose, but if I want to send encrypted url, so I have to use the POST request. So I want to just how we can use the POST request. ? get a respone.

  Example connection authentication. in which we sends the user name and password if username and password (ask the waiter) is right, then his answer is true otherwise false.

• have encryption without authentication

  is it possible to have encryption without authentication? I'm poking around in the Security section of layer 2 of my wlan on my 4402 6.0.199 running

  can I have an encrypted network w / WPA2 AES, but do not authenticate to join? Strange question, but we have a campus of high school and we are concerned about data firesheep firefox plugin popular flight - so we currently have a large unsecured wireless network, but I would like to add encryption as wpa2, but then students will need to authenticate in a correct way? either with PSK or 802. 1 x?

  If I do the settings on the attached screenshot then students will have a correct pre-shared key?

  Hi Bryan,.

  You are right.

  With any security L2 mode, you will always need customer information will allow you on the network.

  A PSK, WEP key or user credentials.

  The only way to have encryption without authentication WEP uses, but you will still need to distribute the WEP key among clients in order to connect to the ssid WEP.

  HTH,
  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Authentication to the multi level in OAM - use authentication Plugin

  Hi all
  
  Please post your useful suggestion to reach the following requirement:
  
  The requirement must authenticate with username, password-I & II - password. To do this, so I need to customize the authentication form.
  I use OAM 10.1.4.3 wherein there is no auth plugin code example in the folder of the example mentioned in the developer's guide!
  
  So I try with the sample files available with OAM old version 10.1.4.1. There is a single file (makefile) DSP based window and I am working on Linux. Could someone help me to convert this file to a Linux compatible file?
  
  There is no clear instructions on customizing the authentication in the Dev guide scheme, so it will be great if someone could help me with this.
  
  See you soon,.
  Ashish

  Verification of authentication scheme - http://download.oracle.com/docs/cd/E10761_01/doc/oam.1014/b32420/v2authen.htm
  and for the creation of authorization plugins check - http://download.oracle.com/docs/cd/E10761_01/doc/oam.1014/e10355/authnapi.htm#BABJJFCE

  An example of authentication plugin is also present at-http://download.oracle.com/docs/cd/E10761_01/doc/oam.1014/e10355/authnapi.htm#BABFEAIA

  Create a makefile for linux should not be that difficult, here is an example of makefile you can use for your reference...

  #Make file for authentication and authorization plug-ins

  AUTHNAME auth =
  AUTH_SO_NAME = auth

  SRC_DIR =.
  Inclure_rep = include

  LIBNAME = auth.so
  SOURCES = auth.c
  OBJS = $(AUTH_SO_NAME) .o
  LIBS =

  INCLUDE_FLAGS = - I$ (INCLUDE_DIR)
  #ldflags case
  LD_FLAGS = - lodbc

  CC = gcc

  CC_CMD = $(CC) - D_REENTRANT
  LD_CMD = $(CC) - shared

  $(LIBNAME): $(OBJS)
  $(LD_CMD) $(OBJS) $(LD_FLAGS) o $@ $(LIBS)
  chmod + x $(LIBNAME)

  $(OBJS): $(SOURCES)
  $(CC_CMD) $(INCLUDE_FLAGS) $(CFLAGS) - c-o $@ $(SOURCES)

  clean:
  rm - rf $(OBJS) $(LIBNAME)

  #end

  Let me know if you need anything else, be it
  Sam

• Maybe clicked on something that I should not have... Advice please!

  A window appeared on my browser (latest version of chrome on a MacBook of 2015 using the latest OS) which resembles an investigation legitimate from my ISP. Recently I had problems with them and my alarm has not extinguished quickly enough. It is curious that this window has appeared without an email but it didn't fully if register because my ISP has pop-up warnings apparently. I have NEVER had a pop up - but - due to some questions by e-mail, my firewall is down and I forgot to put up again.

  Yes, as the fog cleared I had already clicked through the investigation and he offered a free gift and that's when I realized that I should immediately stop the window. I haven't entered ANY info, never filled out a form, or I don't have to download anything. I installed Malwarebytes for Mac and he came clean.

  My concern: could I have gotten something malicious as a key logger or some other identity stealing malware simply by clicking on the poll? I think they call it a drive by?

  I'm a meticulous time machine user, so I have a complete backup of 99% of my system hard disk external. I should burn the Earth just to be sure?

  ... I haven't entered ANY info, never filled out a form, or I don't have to download anything.

  Then you have no reason to worry.

  Could I have gotten something malicious, as a key logger or some other identity stealing malware simply by clicking on the poll?

  Keylogger No.. At for example requires authentication to install.

  The survey was a ruse to try to get you to reveal personal information. There are several varieties of this scam. They are remarkably successful, but you didn't fall for it. No further action is necessary or justified.

  Consider reading some of these tips to use:

  Effective defenses against software malware and other threats

  Phony 'technical support' / 'ransomware' popups and web pages

  Beware of fake Adobe Flash "installers".

  How to install the adware

• AAA router Config

  I found the following config on one of the routers. Are RADIUS server defined two groups as well as individually. That we can remove?

  AAA server Ganymede group + mytacgrp
  Server X.X.80.55
  Server Y.Y.126.50

  AAA authentication login default group Ganymede + local
  AAA authentication login relief group Ganymede + activate
  AAA accounting exec default start-stop Ganymede group.
  orders accounting AAA 0 arrhythmic default group Ganymede +.
  orders accounting AAA 1 by default start-stop Ganymede group.
  orders accounting AAA 15 by default start-stop Ganymede group.
  AAA accounting system default start-stop Ganymede group.
  AAA - the id of the joint session

  radius-server X.X.80.55 host
  radius-server Y.Y.126.50 host
  RADIUS-server application made
  RADIUS-server key 7 XXXXXXXXXXXX

  The AAA server-group feature introduces a way to group existing server hosts. The feature enables you to select a subset of the configured server hosts and use them for a particular service

  you use global "Ganymede +" group of servers so

  AAA server Ganymede group + mytacgrp can be deleted (its unused)

  If you for example 'aaa authentication login default group local mytacgrp', you would use it. What more this group has exactly the same servers that global is not necessary

  concerning

  Przemek

• Moving HP4780 printer all in one

  If I move my printer from one House to another don't need to reset the wireless information?

  The printer should reconnect as long as wireless information remains the same.

  I am recommending network and running before turning on/off the printer if possible.

  The only time wherever the network settings would need to be setup again is if something has changed.  For example, change the SSID would require the printer to be reconnected

  Change the following aspects have to be reconnected to the network printer:

  1. name SSID or network.

  2. type of encryption.  For example, changing from WEP to WPA.

  3. change the password.

• SSL and PCI compliance?

  I install a new 5520 with IPS for a client, and they ask on the SSL (WebVPN) being self-signed PCI compliance.  I don't know what document to find this information under the PCI DSS.  There was also mention on double authentication required, but without seeing the actual needs, I guess just to her.

  If anyone can point me in the right direction or explain the low down on what is needed to make SSL compatible PCI, I would be very grateful.

  I am not aware of a pure and simple ban against self-signed certificates, but personally would prefer those to a root of trust CA - PKI company or third party. For me, it shows a greater awareness to safety.

  PCI DSS 8.3 requirements requires two-factor authentication:

  8.3 incorporate two-factor authentication for remote access (access level network from outside the network) to the network by employees, administrators, and third parties. (For example, remote authentication and remote service (RADIUS) with tokens, access controller access control system terminal access (GANYMEDE) with chips; or other technologies that facilitate two-factor authentication.)

  Note: Two-factor authentication requires two of the three authentication methods (see 8.2 requirement for a description of the authentication methods) be used for authentication. Using a factor twice (for example, using two separate passwords) is not two-factor authentication.

  You can configure an ASA with two factors schemens (RSA SecureID and LDAP etc.).

• Filtering the access to the OSB proxies

  Hello

  Suppose you have 2 users X and Y and three different proxy services: 1, 2, and 3. I want that X can only access proxy 2 and Y only proxy 1 and 3. In addition, the entire communication should be in HTTPS.

  
  I did some research and I found two different methods:

  (1) configuration in the console of the OSB access of transport:

  But for some reason, it does not: every single request is rejected and no one can access the proxy.

  (2) using the certificates

  1. I tried using oracle/http_basic_auth_over_ssl_service_policy, but with this, I can't distinguish each service. For this reason, it is not feasible.
  2. A strategy using personalized. I'm not sure on this subject and how to write it.

  What is your opinion? What is the best option?

  Hi there user,

  You must use the OWSM strategy for:

  1. identify the user who calls the service (it could be, for example, the authentication policy for one user name)

  2. allow the user to access the service, i.e. authorization policy.

  In short, you need create a custom in GOSA combine strategy:

  1 HTTPs (possibly - you can use the transport/network encryption)

  2. identification of the user, e.g. the username token

  3 manage permissions - you have predefined patterns of assertion of strategy for this part.

  For more details, take a look at this - http://www.oracle.com//technetwork/middleware/webservices-manager/soa-component-role-authz-1555950.pdf.

  HTH,

  A.

• vCenter Linked Mode and Perl SDK

  Hello

  our VMware environment is divided into two physical places represented as two instances of vCenter. The two vCenters are interconnected. I think that its Mode called "related"?

  Is it possible to use the Perl SDK also bound mode? Currently, I have to manually interrogate both our vCenters and then sort out myself.

  (1) How to configure Perl SDK so I only authenticate once against our environment in Linked mode?

  (2) How can I build queries against the API so results will include objects in the two vCenters? That is to say. If I run a ' Vim::find_entity_views (view_type = > 'VirtualMachine') "I want to get all the objects 'VirtualMachine' in the two vCenters I can avoid running two separate queries and then later combining query results? ".

  Thank you!

  Thomas Willert

  It is not a published API method, but there is a way to get the vCenter server list in a group of related modes.  I have an explanation and sample code: http://www.virtuin.com/2012/12/querying-vcenter-linked-mode-with.html

  With respect to authentication, if your vCenter instances use the same permissions (which is recommended), then it's just a matter to authenticate each vCenter.  This is what the native client as well (if you have never installed vCenters with different permissions, you will see the login for each vCenter prompt).

  If you look at the blog post I linked earlier, you self an example of authentication each vCenter as well.  Basically you call Util::connect() two times, once for each of your URL for vCenter.  However, do not delete the global VIM uses the SDK package, or it will default to the last vCenter.  I show in the example script: LinkedModeExample.pl

  With respect to the combination of queries... not so easy.  You need to redesign each vCenter with $vim-> find_entity_views().  Now on a more advanced note, API is powerful enough to make custom inventory queries, you can usually pick up and keep the updates in your objects.

  What I would recommend as a simple approach is two calls to find_entity_views, then push them in a hash or an array.  You'll just want to use the UUID vCenter:

  $vc_uuid is $vim1-> get_service_content()-> {'about'}-> {'instanceUuid'};.

  The instanceUuid has been added in vCenter 4.x and later versions (do not have in the past 2.5 vCenter instances).  Then use this instanceUuid + moref as hash keys.  This is important because the morefs can be duplicated between vCenters.

  So, you can then create a hash:

  My % vm_hash;

  foreach my {$entity (@$vm_views)}

  My $moref = $entity-> {'mo_ref'}-> {'value'}; # will be vm-# for virtual machines

  $vm_hash {$vc_uuid.} "+". $moref} = $entity;

  }

  Then you can quickly research specific VMs and keep separate them between vCenters.

  You'll find it works for simple data queries, but you start to get more items of inventory (say for an inventory report), the relationship becomes more complex and the number of objects grow.  I did work to push these values in a database and files (including by running it on 5 or less than weight and WaitForUpdatesEx), excel, which works well if you have the time to build the DB and the work of database object schemas.  Just use instanceUuid + Moref value as primary key to prevent any moref vCenter cross reuse value.

  The other option is that the vim reference is added to each object, so you can just get the data of each entity:

  foreach my {$vm (@$vm_views)}

  Print "VM:". "." $vm-> {'name'}. "\n";

  Print "InstanceUuid VC:". $vm-> {'vim'}-> {'service_content'}-> {'about'}-> {'instanceUuid'}. "\n";

  Print "ServiceUrl VC:". $vm-> {'vim'}-> {'service_url'}. "\n";

  }

  I have a project that I tinker with in my spare time (which is rare these days) which aims to consolidate multiple vCenters into one database for queries and reports, but I didn't get far enough away from share it (very rude, but works for a subset of data at present, but it is very effective for collecting loose on<5s intervals).="">

  You can also look into VMware Orchestrator.  Orchestrator can connect to multiple vCenters and caches data for access by automation.  According to your WAN performance, he can work a geographic site and make sure that you need (just watch the moref, names of entities and other potential overlap between vCenters) aggregated data.

• ATG AutoLogin feature

  Hi all

  I finished with the autoLogin for profile feature we have in our repository,

  My Question is, if a profile checks in the autoLogin feature, means that he agrees to autoLogged in the future.

  But in the next time, when it comes, here, that verifies that this particular profile has put oneself for autoLogin... ??

  I mean, I would like to know the level of components that makes this review. ?

  Please keep your thoughts!

  Kind regards

  Sandeep-

  Hi Sandeep

  Profile autologin property is used to identify users back to your site, who are already registered. If securityStatus can be used in the case where a user attempts to access a page that is quite restrictive to check the type of audit, the user has already crossed and based on that you want to allow the user access to this page restricted or not. I hope that you would have gone through with explanation autologin and securityStatus respectively to

  http://docs.Oracle.com/CD/E24152_01/platform.10-1/ATGPersProgGuide/HTML/s0502trackingregisteredusers01.html

  http://docs.Oracle.com/CD/E24152_01/platform.10-1/ATGPersProgGuide/HTML/s0502securitystatus01.html

  Oracle, ATG trade Web - authentication

  The following example shows how to configure a servlet authentication and authenticator:

  AuthenticationServlet.properties:

  $class=atg.servlet.pipeline.BasicAuthenticationPipelineServlet realm=Dynamo6.0 authenticator=Authenticator nextServlet=SomeHandler
  

  Authenticator.properties:

  $class=atg.servlet.pipeline.BasicAuthenticator passwords=\         admin=jjxr2,\         hank=angry
  

  In this example, the authentication servlet sends a request to SomeHandler If the request is authenticated by a name and password is located in the passwords property of the authenticator. The realm property specifies what Kingdom must be displayed to the user in the window asking you name and password.

  Thank you

  Gareth

  Please indicate any update as "Good response" or "Useful answer" If this update help and answers your question, so that others can identify the correct/good update between the many updates.

• Changing attribute OEG

  Hello all;
  
  I want to copy the WSSE field username to another field as uname in the body of the message. How can I copy or change attributes. ?
  
  Thanks for the replies.

  Has taken place an authentication event? If yes then the username value will be included in an attribute authentication.subject.id. You can use this value in the 'Conversion' > 'Add an XML node' and give the content of the node value which will be expanded at runtime, for example:

  ${authentication.subject.id}

  If an authentication event has not appeared in an attribute using the 'attributes', you can extract the value of the username, then > filter "extract of the message" and run against the message xpath to extract the necessary value and store the value in an attribute.

• "How to make cookie and the headers of the incoming request during a" call "JSP?

  Hello

  I am very new to ColdFusion and have been experimenting with ways to "call" a JSP to CFML page. I am running ColdFusion 8 Developer deployed on GlassFish 3.1.1 (on Win2K3 64-bit).

  So far, I've been watching. forward() and GetPageContext () include and using < cfhttp >.

  I have some working test cases, but in my case, we use a single-sign - produced, Oracle OAM, and I would (should) be able to pass some of the cookies (for example, UNIQUE authentication cookie) located on the inbound (to the .cfm) query through the JSP 'called '.

  I know, for example, with < cfhttp > can I set the settings to set headers, but how to (1) get the (for example) "Cookie:" the head of the new request and then set it in a setting for < cfhttp >?

  I also have a similar question in case the GetPageContext () .include () is used, instead of < cfhttp >.

  Example/code snippets to do this would be greatly appreciated!

  Thank you

  Jim

  You can retrieve the cookie that is entering the scope of the cookie and add it to the query of cfhttp under another cfhttpparam

  Jason

• Select the security for the purposes of the ADF

  Hi, OTN,.
  Surprisingly could not select security for my ADF application.
  
  I tried set the name of the realm in the web.xml file, as it will:

  <login-config>
      <auth-method>FORM</auth-method>
      <realm-name>OIDRealm</realm-name>
      <form-login-config>
        <form-login-page>/login.html</form-login-page>
        <form-error-page>/error.html</form-error-page>
      </form-login-config>
    </login-config>
    <security-role>
      <role-name>valid-users</role-name>
    </security-role>

  But nevertheless the happenes authentication against the default domain.
  
  Could you please advice me?
  
  WebLogic 10.3

  If your application is an ADF Faces running on a WebLogic Server application, then you need to hear bad news. You can have defined several areas of safety in WLS, but only one is active (default) and the other ones that are not accessible. This is the way in which WLS works. The puprose to have several kingdoms WLS is being able to define different security schemes (for example, different authentication providers) and to be able to pass easily (by selecting another realm as the default value).

  Dimitar