Example: Pavilion g6: usb taken don't work that usb2 and usb3

Similar Questions

• I use developer preview windows in my acer aspire one netbook... a job well done, but the winstore apps don't work... and I do not see my bios settings also... helpme

  I use developer preview windows in my acer aspire one netbook... a job well done, but the winstore apps don't work... and I do not see my bios settings also... helpme

  Windows Developer Preview: OS General Questions:

  http://social.msdn.Microsoft.com/forums/en-us/windowsdeveloperpreviewgeneral/threads

  The Developer Preview of Windows is a pre-beta version of Windows 8 for developers. These downloads include beta software that may change without notice. The software is provided as is, and bear you the risk of using it. It may not be stable, work properly or work the way that the final version of the software will be. It should not be used in a production environment.

  Netbook screen

  If you have a netbook with a screen 1024 x 600 Metro applications will not work. 1024 x 768 is the minimum for Metro applications.

  Several people have reported that Metro apps can be run if you connect an external display that is 1024 x 768 or more.

  You can try this modification to allow higher resolutions:

  http://www.netbooklive.com/how-to-get-better-resolution-on-your-standard-10-inch-NetBook-2772/

  BIOS - disable hybrid startup:
  http://www.sizzledcore.com/2011/04/21/enable-disable-hybrid-boot-in-Windows-8-for-faster-startup-time/

• USB ports don't work, help!

  It all started when I followed the advice to uninstall usb ports because I wanted to put back front usb midi or usb keyboard. But Windows 7 64 bit not acknowledged on the back usb port, so I uninstalled usb ports and now system always tells me it can't find the driver for any usb ports 7. Now Win can not install any usb device and the keyboard or the mouse wireless, I also tried another mouse. In the work of bios mouse and keyboard.

  Just don't tell me to install the new copy of Windows.

  I tried really many solutions: remote connection I tried, again uninstall usb and install asus motherboard drivers, no luck.

  He acknowledged I usb controller but always after I connect it will automatically try to install the mouse driver and it says "Unknown device" "device driver software was not properly install.

  Restore point has tried, without success because of the mistake, that he can't go back.

  Recovery Console has tried, all solutions of no repair no chance.

  Watched a lot of solutions on the net, could not find the right answer.

  Tried to delete usbstor and usb recording

  Open gpedit to prevent Windows to automatically search for driver software, no luck.

  I finally got from nearby ps2 mouse then tell me how to fix the usb ports!

  Maybe is something deeper in the Windows system or is it something so simple?

  Help, please.

  Yes, but I think it's good now, I knew it was something simple ridiculous, feeling so stupid now, I almost tried everything.

  Seems I was missing USB.inf in the Windows inf folder, but it was just half task. When I tried again to install the USB drivers in Device Manager that I manually navigate to composite usb and usb root hub driver automatically generated list so before Windows search and found nothing. Everything works now, so happy, tried 24 hours to solve this problem and on the end it's always something simple :)

  Thanks for trying to help, really appreciate it!

• Why all the mini-usb Chargers don't work with my pre! Grumble, boo-hiss...

  I forgot to take my charger with me for what was supposed to be a quick trip.  After many postponements, flights cancelled, calls for the family and a 'help' of the airline office... I noticed that my battery was low so I decided to buy a charger at the airport.

  Here comes my problem with my Pre and Palm...

  1st stop, I have overall love this phone and understand that a new version can not have all the features I want/need.

  What I don't understand, is why any mini-USB charger does not work!

  I visited a few shops and kiosks where NONE of the generic Chargers would work and they did not offer Palm products.

  I've certainly limited technical knowledge these things here, but can someone please explain to me why there are standards (USB, Mini-USB, etc.) but Palm makes their mini-usb special requirements or unique so only some products work?

  I have used several brands and everybody has worked so far for me. I have even a mini - mic adapter that adapts to any standard mini-usb and works fine.

  Just to clarify, you said you have mini-usb, the pre uses micro usb.

  Micro-usb is also going to be the standard.

  http://www.Engadget.com/2009/02/17/GSM-Association-sets-2012-target-date-for-universal-cellphone-ch/

  Message edited by tagz on 09/30/2009 15:48

• My USB Ports don't work, but they still have the power to impose measures.

  I have a Toshiba laptop (A205-S5859) and all 4 of my USB ports do not work.  I am running Vista Home Premium.  Sometimes they detect an 'unknown device', but it is not very useful.  They also always charge my blackberry.

  In my efforts to fix it, I have:

  * disabled/enabled all 4.

  * uninstalled/installed all 4

  * Made some USB ports are initialized in my BIOS

  * some thing I have updated BIOS updated

  What can I do else?  Help, please!  I'm desperate to be able to sync my new blackberry with my previous all my info is on my computer.  I also want to be able to sync my blackberry on my computer in the future...

  Hello

  Even if you did some of them previously please follow these steps in this order.

  --------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
  as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
  Is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• USB ports don't work... flash drive, no mouse, do nothing

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  all the USB ports does not work; There is no error message. Have tried to disable/enable, stop and restart and the curse. None of these work:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Is to check the settings/settings (BIOS/CMOS) often F2 as you start so watch the display for
  access key - do well sure edge USB is activated if there is a parameter.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ++++++++++++++++++++++++++++++++++++++

  Possible hardware USB badly shot - if a PC you can disable the onboard USB and use a
  3rd party card extension that are not expensive. If a laptop then you will need technical assistance
  a real computer store (not the leeks and the glances at a big box BestBuy or othe stores) or system
  Support from the manufacturer.

  Also check with the manufacturer of system and their forums support (as appropriate) for known problems and/or
  solutions.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite L655 - USB connectors don't work after hibernate or restart

  Hello world

  Using Windows 7 Home Premium SP1 on my Satellite L655. After prolonged or even standby restart if the devices (such as an external mouse or speakers etc.) are always connected, the USB slots does not seem to work, stay inactive.

  Even when plugging on and dragging new custom USB devices work. Only if I start the laptop when the devices are not blocked and after the laptop are running that I plug them in they work. And it applies to all 2 USB slots

  Help, please
  Thank you
  LON

  Hey Buddy,

  I m not very well, but this problem could be linked to the USB/Chipset driver. So I recommend you a chipset driver update that you can download from the official page of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  In my opinion, it has something to do with the OS or drivers. I mean the USB ports work physically because you wrote that everything works if you plugin the devices after Windows starts.

• USB ports don't work at all nothing

  My usb ports stop working after a viruis took over my computer so I just left it there for 1 year or 2 years past so I decide to solve the problem I did I start my system and then I tried to put in my mouse and nothing happen after I went ahead and put it in my usb key to check if it works and it does not so I went to check the States discs and they all say they are good job so I decide to uninstalle all drivers and install them back but still nothing works and they still say they are working properly please help if you understand my problem how to fix

  Hi JoseArredondo,

  ·         What happens when you try to access the USB port?

  ·         You receive an error message/code?

  I suggest you follow the provided items and check if it helps.

  http://support.Microsoft.com/kb/310575

  http://support.Microsoft.com/kb/817900

  http://support.Microsoft.com/kb/885624

  http://support.Microsoft.com/kb/314634

• My USB ports don't work. I followed steps everythings is recommended for microsoft and nothing

  installation of USB, updated

  Hello

  ·        What are the steps that you took to resolve the problem?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        What happens when you try to plug in external devices on the system? You get the error message?

  It could be that the USB drivers have not corrupted. I suggest you to uninstall the drivers from Device Manager and let windows when the system boots reinstall it. Follow the steps mentioned below.

  a. click on Start menu and type device manager in the search box of start and press ENTER.

  b. click on the USB (Controller Universal serial bus) to develop the list and remove the drivers that are installed on the system.

  c. close Device Manager, and then restart the computer.

  d. let windows install the drivers for the USB ports automatically.

  e. Once you have reinstalled the drivers, connect the camera and check if you're able to connect to the system or not.

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion dv6000, some letters don't work not

  I posted a yahoo answers it.  http://answers.Yahoo.com/question/index;_ylt=AqAsPybFI.ijsfKBW_26gQrsy6IX;_ylv=3?QID=20130715082508A...

  Help, please.

  Thank you for the input, but it did not really help. I didn't buy a new keyboard off of ebay and it works perfectly fine.

• Exception 0xc0000005 (access violation) peripheral USB connection; My Computer works, shared VMs and ESXi VM does NOT work

  Hello

  Running VMware Workstation on Windows 7 64 bit 9.0.2.

  Created a machine virtual 64-bit of Windows 7 at the workstation to VMware Workstation, I am able to connect a USB device and it is accepted within the virtual machine.

  Clone of this virtual machine using Workstation Drag & Drop in the shared VMs that throws the Exception when I click on the USB device:

  ---------------------------

  VMware Workstation error

  ---------------------------

  Fatal error VMware Workstation: (vmui)

  Exception 0xc0000005 (access violation) occurred.

  A log file is available in «...» ».

  You can request support.

  To collect the data to submit to the VMware support, choose "Collect load data" in the Help menu.

  You can also run the script 'vm-support' in the folder my computer directly.

  We will respond on the basis of your entitlement to support.

  Same Exception I get when I start this VM on ESXi and use via VMware Workstation.

  Journal of the fasteners.

  MKS. Enable3D true or false doesn't make any difference

  Thanks for the help, Philipp

  Hi PhilippD!

  It seems that you have reached a vice that crept into the manipulation of workstation s 9.0.2' of remote USB devices.  We have fixed the problem in our internal versions of workstation, but until an updated version is made public, it seems that you need to roll back to the workstation 9.0.1 if you need to work around the problem.

  Sorry for the inconvenience!

  --

  Darius

• PC notebook Acer Aspire 5734Z... What are the USB ports... USB2 and USB3? Thank you

  About to buy 500 GB 2.5 "HDD USB in order to create a System Image (& also to store back ups).

  Seems the type of USB connection makes a big difference of speed of transfer of information?

  Anyone know that USB is mounted in the ACER ASPIRE 5734Z? 2 USB or USB 3?

  Thank you

  USB 2.0

• USB ports no longer work after upgrading Windows 8.1

  I have upgraded to windows 8.1 and from that moment, my USB ports don't work anymore. tried to check them, but does not (uninstall,...);

  I have a HP Pavilion 15-B050EB; I can't find the drivers for the USB ports on the HP site. can someone help me?

  called them; very friendly guy, but the only solution is a total recovery.

  which means a working day to do backups and re - install software programs...

  Thanks for your kind help anyway!

• USB ports do not work on my pc windows 7

  I had installed windows 7 os newly but the usb ports do not work.

  and ports work in windows 8.

  while trying to install the usb driver its showing already installed on your pc.

  I don't understand what the problem is.

  If you are From India call 180030005366 and ask to Lenovo Tech person to take the remote control system to check, seems like a patch required on their side

• Pavilion 17-g113dx: USB hub does not work on Pavilion 17-g113dx after intallation of win 7

  Hi, I have a 17-g113dx Pavilion, which was originally to gain 10 on it, but I'm frustrated with it and installed win 7.  After the driver installation failed for the USB hub.  Is there a driver that is compatible with this machine and the operating system that I can download?  The hardware ID are listed below.  I have several other questions, but it is the largest.  Thank you.

  PCI\VEN_8086 & DEV_9CB1 & SUBSYS_8094103C & REV_03
  PCI\VEN_8086 & DEV_9CB1 & SUBSYS_8094103C
  PCI\VEN_8086 & DEV_9CB1 & CC_0C0330
  PCI\VEN_8086 & DEV_9CB1 & CC_0C03

  Hello:

  For the first unit, download and install the 2nd driver on the list from the link below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  For the 2nd device, install you the driver of USB3 has not ended.

  See if it works.  Download and unzip the driver Intel USB3 lasvegaswireman posted.  Do not run it.

  Go to Device Manager and click on the USB hub root of problem.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and navigate to the Intel USB driver you have unzipped.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart the PC.

  The third device... you run the patch from the link below to activate the TPM on W7 2.0 device.

  https://support.Microsoft.com/en-us/KB/2920188