Example: Want 4500: I have Windows 10. On hp 4500 want I don't want to "print to PDF" as default. How to disable or change

Similar Questions

• I have Windows Vista - I'm a msge saying that the recovery disc (D) is almost full. How can I transer to OS (C) Disk that has plenty of room to the left?

  I have Windows Vista.  I'm a msge saying that the recovery disc (D) is almost full.

  How can I transfer to OS (C) Disk that has plenty of room?    Thank you.

  Hello

  I'm sorry, but you cannot move the D: Partition recovery or its contents; It will not work if you do.

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. If you want to reinstall Windows from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  See you soon.

• We have many laptops in our House that we want to print our primary computer. How to create a network?

  Four laptops and a main computer

  You have left out a lot of information, like how you get to the Internet and what systems of operation or Service Pack levels different computers are running, and if the printer is connected locally to a particular computer. So I'll give you some general tips and then if you have any questions you can come back with the lack of details and I can be more specific.

  General steps:

  1. do you have a router (or a combination modem/router). This will create the Local ("LAN") network. If all the computers are connected to wireless local area network, make sure that you configure the network wireless safely. See below for more details.

  2. best solution - to have a printer real network which is connected by cable (wireless only if it is not close to the router) to the router. Then all computers on the local network can print to it without the need of a particular computer to be turned on.

  3. If your printer can be connected locally (directly to a computer via a USB cable), then:

  a. set up the file/printer sharing on all computers (see below for more details);
  b. install the printer on every computer.

  Configuration of the router wireless safely:

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing.

  Network:

  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx
  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  (C) in Vista, turn on password protected sharing. Create accounts of users and corresponding passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  XP - set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  Vista - Start ORB > Search > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.
  MS - MVP - Elephant Boy computers - don't panic!

• I have windows defender and on Mcafee virus scan said to turn one apart from that which and how?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Who or what tells you to turn off one of them?

  If the McAfee program includes spyware protection, you can disable Windows Defender in Start > Control Panel > Windows Defender .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• I have windows 7 (64-bit) and my DVD - Rom drive does not work. For some reason, that I disabled it, how can I activate it? Thank you, Billy

  This issue should really be down here. There is nothing to add.

  Thank you
  Billy

  Hi Billy,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description provided, you have problems with activation DVD ROM.

  Have you tried the steps suggested by Sandeep V from the link below?

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/i-am-running-Windows-764-bit-and-my-DVD-ROM-has/0e7c6ec1-e61c-40af-8d88-af816681e1ba

  Answer to us if you have problems with activation DVD ROM or any other problem of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Example: Want 5532: print photos with red stripes through them

  I have a printer Envy 5532. If I print from an sd picture card print ok, copy a photo directly from the scanner prints perfectly, but if I print photos already stored on my computer they thin red lines randomly through them.

  Hello

  Thank you for your response. Now, I found that my problem was actually confused by a number of coincidences.

  I install the printer and run test print page & copied from the scanner and printing from an sd card until the problem of the "band" appeared. When I tried to print from a photo already stored on the computer, it was when he showed first really upward. I ran the Print Tool of doctor and no problems have been reported. Similarly, the printed test page seemed ok even though of course only small colored sections there. Finally, after running test after test, the ink ran out and I had to put in a new cartridge - Eureka! problem disappeared.

  I find, therefore, that I had a faulty cartridge that was causing the problem. I have since run a photo on the 'best quality' on Photo paper and it looks perfect. The high price of the cartridges, it was a costly exercise, but at least I'm now able to print my photos which is what I bought it for.

  Lagartija.

• I WANT TO PRINT THE PDF WITH AUTO BROKEN IN HER OPTION. I HAVE THE FILE THAT HAS 500 PATIENTS LAB REPORT WITH EACH PATIENT OF THE ID OF THE PARTICULAR SAMPLE. HOW CAN I AUTO DASHED THEM WHEN PRINTING?

  Dear Sir.

  I have the pdf of the folder that has report 500 in it. Each report a particular sample id written on it. But this file is merged. How can I print this file using discontinuous auto? I need auto clip per patient.

  Thank you

  Thomas Deslandes

  If you can auto discontinuous batches in a single file depends on the printer driver. Check the printer manufacturer's documentation, or the forum.

• Scanned a form and now want to print on the form. How?

  Scanned a form and now want to tap on the shape and maintain a blank form on file.  Operating system is Windows 7.  Digital is in the Windows Photo Gallery and I can't type on the blank form.  I intend to use the blank form scanned for about 50 different applications.  Need help.  Thank you

  Scanned a form and now want to tap on the shape and maintain a blank form on file.  Operating system is Windows 7.  Digital is in the Windows Photo Gallery and I can't type on the blank form.  I intend to use the blank form scanned for about 50 different applications.  Need help.  Thank you

  ===============================================
  If you have scanned the form as if it was photo and recorded in
  image as .jpg format... you will need to print it out and write about it
  manually.

  To create a form that can be edited in a word processor such as Microsoft
  Word for example... you need to scan with OCR (Optical Character
  Recognition software).

  Microsoft Document Scanning... for example... who with
  Microsoft Office would be a good choice.

• HP4500 want to print images mirror if so, how?

  You want to transfer T-shirt, option for paper transfer listed, but no mirror image will be created.

  Hello

  Please follow the instructions below:

  http://support.HP.com/us-en/document/bpu02032

  How easy and fast to print images in the mirror just needs support on them. In this way, you can print to a PictBridge compatible printer.

  I hope this helps!

• I have not been able to install updates of the player, can not print a pdf file. After several attempts, I uninstall

  I tried to install the update of the player when I could not print a pdf file. This failed. After that I uninstalled adobe, I can't re install. Download of timesout to 64%.

  The same thing is happening with the flash player. I read the instructions, tried several times but still nothing. can someone help me?

  You can try to use this tool first remove all traces of your computer:

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  Then you can download the complete player offline installer from

  http://get.Adobe.com/reader/Enterprise/

  After downloading, restart your computer and run the Setup program before anything else.

• How to send a Microsoft Word document using gmail (instead of Windows Live)? I have Windows 7.

  I have a gmail account - is it important that I have Windows Live?  or should I do somehow gmail my source of electronic mail "by default".

  I believe that if you download and install Mail GMail and GMail warning system can be defined as the default e-mail and you should be able to mail documents directly.

  See here for more information:

  http://mail.Google.com/support/bin/answer.py?hl=en&answer=10966

  http://email.about.com/od/gmailtips/Qt/et_default_prog.htm

• my new computer with windows 8 will not print my pdf files, print everything well.

  I have a new computer HP running windows 8. my printer works fine except when I want to print a pdf file. If I install the printer drivers, it erases all my Outlook folders.
   
  I'm so close pitch on this windows 8.
   
  Linda Hewett

  Got it to work.  I discovered that the updates have been downloaded, but the computer needed to restart to get them set up.  PDF does not open until this happened.  By chance, I noticed a message that says my computer will re-start in two days to config updates.  I chose restart and it took 40 minutes for an update installation and config.  Fingers crossed I checked my pdf and they ran.  problem solved.

• I try to print to PDF, but I can't access the print without a printer window >. <

  In the end, I am creating a PDF to print as a booklet, so that when I take her to somewhere in the impression, like the library, I can just double-sided printing files, and it will be properly implemented.  Unfortunately I can't able to get to the window print, because I don't have a printer connected.  But I'm wanting to print to PDF!  How can I get in print without an attached printer window?

  Acrobat Reader cannot create PDF files. You can create PDFs with Adobe Acrobat.

• I have istalled security code on my router and now I can't print.

  I recently put a password on my router, thinking that my broadband was stolen. Printer dosent my work now, and the router does not recognize that it is on the system.

  OK, you will need to re - install the printer.  If you have Windows you can go to start > all programs > Hewlett-Packard > [your printer model] > add a device.  Add a network printer or wireless when it asks.  You may need to temporarily use a USB cable to connect the new network settings on your printer.

• How to disable Yahoo and Windows Live to automatically run at startup to the top

  How to disable yahoo and windows live programs for not runing automatically at the turn on computer?

  * original title - how to disable yahoo and windows live programs for not runing automatically at the turn on computer? *

  Hello

  http://www.tech-recipes.com/Rx/2443/windows_live_messenger_prevent_starting_when_windows_starts/

  Windows Live Messenger: Prevent from starting when Windows starts

  1. open Windows Live Messenger and sign in.

  2. next to your name at the top, click on the arrow pointing down

  3. Select Options

  4. Select general in the left pane of the Options window.

  5. under Sign In, clear the check box automatically run Windows Live Messenger when I log in Windows .

  6. click on OK.

  http://answers.Yahoo.com/question/index?QID=1006022313620

  How can I stop Yahoo Messenger to load at startup?

  When you're connected go to messenger in the top menu bar, then Preferences and then to the general and uncheck the box for automatically start yahoo messenger when I start my computer and then apply ok your way out