I have istalled security code on my router and now I can't print.

Similar Questions

• I got a new modem and the router and now I can't print wireless.

  I have a Photosmart 8450 printer.  My operating system is Windows7.  I tried to follow the Scan doctor, but I guess I'm not tech savy enough to understand.  It worked fine before the new modem and the router.  She is 'offline' and I can't understand how to put line.  Thanks for any help and easy enough for me to follow.

  Hello raedene715.

  Thanks for the transcript, it was useful.

  Please, check the network cables and connections (side of the printer and router). If possible, try a different network cable.

  See you soon!

• Changed router and now I can't print

  BT have changed my router.  I use a Mac 10.9. My printer is an officeject 4620. It worked fine before the change in router. I can print to the printer itself, I can print using the HP software (but it ask me to enter the IP address and then enter the router password) but cannot print from any software, that is to say the word. I don't get an error message and the computer seems to try and send it to the printer, but it does not. Someone at - it ideas?

  Hi lynneseymour,

  Welcome to the HP Forums!

  I read your post about not being able to print wireless from the evolution of your router, and I'd be happy to help!

  With regard to the new router you use, what's his name, and model number? How far is the router of the printer? There is a parameter called "Multicast" router, and it must be enabled for printing from a Mac.

  To connect the printer to the new network, you will need to restore the default network settings on the front panel.

  This can be done by following these steps:

  (1.) by clicking on the key icon on the lower part of the front panel

  2.) click the arrow on the button down to network and press Ok

  3.) scroll down to wireless settings and then click Ok

  Scroll 4) to the network by default and press Ok

  5.) click Yes and the default network will be restored

  Then, the printing system needs to empty the old print queue. To do this, follow this document about the reset printing system.

  Do not click on the button to add another printer, the next step is to run the HP installation wizard to perform an automatic wireless connection.

  The next step is to run the HP Setup Assistant to start an automatic wireless connection with a usb cable.

  Follow the steps under "optional: I installed my printer... to move to a wireless network connection" to install the software of the printer for a wireless network connection.

  I will be looking forward to meet you and thank you for visiting the HP Forums!

• I have been connected to the internet (wireless), then I unplugged the router and now I can not connect to internet. I tried diagnose the problem, but he said that he could not.

  I have a wireless internet connection for my laptop. I was connected to the internet, and it worked very well, so I had to unplug my router and all of a sudden I can't connect to the internet more. When I open the available networks, I hit connect on mine and he said: it does not work then I hit "diagnose the problem" and then, he says he can't. Also it is not even give me the option to set my password to connect to my network, but it does when I try to connect to any other.

  I suggest to unplug all your network cables and unplug the adapter from your modem AND router. ONLY plug your modem back power adapter in. Wait until you get a steady green light on your router, which indicates that it is ready. Then, connect the ethernet cable from your modem to your router INTERNET port. Connect the ethernet cable from your computer to any other ETHERNET port on your router. Finally turn the monitor for your router.

  If you do not do so in this order, the router can not connect properly to the internet because it doesn't have the correct IP address of your modem.

• I have reset my etec router and now I can not past the prompt 192.168.1.1. My pc is 8 years old and very, very slow

  I tried for two days now to restore my internet connection.

  I tried for two days now to restore my internet connection.

  192.168.1.1 is probably access your router's IP address and it could be a Linksys.

  If you reset your router, we help can'r you. You will need to access the router and configuring PPPoE username and password.

  Call your service provider.

  Why in the world would you reset your router if you didn't know how to put in place a new or know what to do then? It's like taking something apart and not knowing how to wind again.

• I had a change in router and now I can not connect wireless network printer

  HP Deskjet 3050 has

  Windows 7

  I got a router change and now can not conect my printer on the wireless network. What should I do?

  Hi MaggieS, this support document provides suggestions for the correction of a reliable wireless connection. Try to work through them in the order of presentation and do not hesitate to post back if you are still not able to get connected http://support.hp.com/us-en/document/c02817031

  All the best.

• Hi, I changed my router today and now I can't print

  any help appreciated

  Hello

  Thank you

  First of all, you need to remove or reset the old setting on your printer by following the steps mentioned below.

  Steps to reset:

  On the front of the printer, go to network Menu > default network > Yes.

  Once you have reset the network settings on the follow-up to the printer steps mentioned below to connect your printer to your wireless router

  1. go in the control panel of the unit NETWORK > select the Wireless Menu > Select wireless configuration wizard

  2. Select your network and enter the necessary information which will be asked to enter and you will get connected to your home network.

  3. Once connected, you must add a new printer using the software on your computer.

  * Say thank you by clicking on the "Bravo!" Star"located on the left *.

  * Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your issue.*

• I have Apple TV gen 1. I changed my iTunes password and now I can't the Apple TV in the House. It will connect to iTunes. I type my Apple and a new password. My phone Gets a text with a verification code, but the Apple TV says wrong user

  I have Apple TV gen 1. I changed my iTunes password and now I can't the Apple TV in the House. It will connect to iTunes. I type my Apple and a new password. My phone Gets a text with a verification code, but the Apple TVsaybadusername password or.

  Your ATV1 has an old software system not updated for years.  You have 2 factor (6 digits) or authorization of step 2 (4 digits) enabled for your Apple account.  Here are the characteristics of the latter.  I disable these on your Apple account and try again.

  For Apple ID - Apple Support two-factor authentication

  Frequently asked questions about the audit in two steps for Apple ID - Apple Support

• I have a serial number and request code when I bought Adobe Acrobat of TechSoup. For some reason, I can't post it after the download, and now I can't use it yet at all. Please notify.

  I have a serial number and request code when I bought Adobe Acrobat of TechSoup. For some reason, I can't post it after the download, and now I can't use it yet at all. Please notify.

  What is the exact error you get when you enter your serial number?

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Can someone help me? Here's my problem, I typed my redemption code and got my serial number, but as I get a pen and crushed paper my computer and now I can't have my serial number for the 14 items

  Here's my problem, I typed my redemption code and got my serial number but as I get a pen and crushed paper my computer and now I can't have my serial number for the 14 items.

  All can help me please!

  First, check your Adobe account to see if the serial number is Adobe ID

  Otherwise, you need to contact Adobe directly

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

  Hello

  I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
  Any suggestions?
  original title: connectivity Limeted

  The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

  Your messages are a bit terse, but if I understand correctly

  • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
  • All but one of these computers can reach successfully from the Internet via the router.
  • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
  • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
  • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
  • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

  Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type the following lines and press ENTER after each line

  Netsh reset winsock catalog
  netsh int ip reset c:\resetlog.txt

  Close the command prompt window and restart the computer.

• I paid to have access to Photoshop, and now I can't open the app.

  I paid to have access to Photoshop, and now I can't open the app. He says I need to repurchase or serial number code, that I have received. I downloaded the app and it won't let me.

  I just want to make a f * king photo. Jesus christ is so easy to use

  cbrehmes

  Make sure that you have signed with correct email address

  Sign out, sign in | Creative cloud desktop application

  If the e-mail address is correct, then I suggest refer you your guests entered the file once.

  You can see the steps on

  Log, activation, or connection errors. CS5.5 and later versions

• I have download 12.1 and now I can't make a new playlists

  I have download itune 12.1 as he said, and now I can't make a new playlists to my voice memo on cd can anyone help me?

  The current version is 12.4.

  Download it directly from Apple.

  http://www.Apple.com/iTunes/download/

• I have a macbook pro 13 early 2015. Now I can here a clicking sound when I move the lanes on the side mac. Feels like some hardware is loose inside. But my mac works well as well. I left about 80 days of warranty. I'd give to repair? suggestion pls

  I have a macbook pro 13 early 2015. Now I can here a clicking sound when I move the lanes on the side mac. Feels like some hardware is loose inside. But my mac works well as well. I left about 80 days of warranty. I'd give to repair? Someone had this problem? Suggestions please...

  nidgp wrote:

  I left about 80 days of warranty. I'd give to repair?

  Absolutely, examined her!  There is some kind of hardware problem.

  Ciao.

• Hello, I have a problem with Mozilla Firefox 14 and now also Firefox 15. When I click on .html files on my desktop, firefox will open a new window twice. Where is the th

  Hello, I have a problem with Mozilla Firefox 14 and now also Firefox 15. When I click on .html files on my desktop, firefox will open a new window twice. Where is the problem? Thank you

  That may be a problem with the DDE.

  Try to undo and redo Firefox as default browser.
  
  Make a different browser like IE browser by default and then let Firefox do it again.
  
  See:

  • http://KB.mozillazine.org/Default_browser
  • http://KB.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox