Excel Report Builder error

Similar Questions

• excellent report generation does not close Excel

  I use the excel Report Builder to save test reports.  I can create the report using a template and writing if necessary without any problem.  After each test step, I add data and save the report.  I continue to Excel closed using the modification of the parameter of the State of the window.  I don't want the user to see Excel or even know it is there.

  The question is, when I'm done test and use features, report vi, it leaves an open excel instance that you see in the Task Manager.  And the only way to close that instance is to open one of the files that was created and close it and then exit excel.  The memory used by this instance develops a little every time that a new file is created.

  LabVIEW 2011 SP1 (32-bit 11.0.1.F2)

  Excel 2007

  How can I close excel completely after each test?

  You're just sorry.  Attached is an improved version which works, but again not sure if there is a better way.

  This will get the HWND before disposing of it, has it as usual, then given the HWND get PID (it was the bad terminal last time) and then kill based on that.  It seems to work and I tested this time.

• conversion of the error of date / time when using easy excel reports

  I export a 2D array to an excel file using Excel reports easy vi. I have no problem with that. My data has a number of areas with different formats (text and date/time). My problem is the following:

  * some (in other words, not all data is in the same worksheet) the veiled values of date/time to mm/dd/yyyy format whereas they should be in mm/dd/yyyy (is the excel format it is y in!). Essentially, I have 30/09/2008 (September 30, 2008) in a cell. After ticks on Oct. 1, it will display the date as, 01/10/2008. Excel thinks that this date is in the format dd/mm/yyyy.

  This is a known error in earlier versions of Excel (2002), in particular when you convert a .csv, .xls file. The solution, it was not to add "Local: = True ' at the end of the vba command string (see here: MS Knowledge Base). Here, in LabView I'm not sure how to proceed.

  I tried to change the format of the column in question to the 'text' by calling an Excel Macro in LabView, but do you think I can find the vba command to do? No, not so much.

  LabView saves the Excel file in 97-2003 format (I use MSOffice 2007) and I wonder if the version they are using does not consider the time correction, as described in the knowledge base (or if it applies).

  Any suggestions, I'd love to hear from you.

  Kind regards

  David.

  Hi LaRisa,.

  I was able to find the cell Format Excel set vi and successfully change the format of the value of the cell. It wasn't until I had found the vi that I realized that I've been down this road before. Change the format after the table has been created does not change values dd and mm switching that has already occurred. However, if I did before I "created the table" (or vi Excel table) and set the format to be '@' then it displays the string like 'Text' in the Excel file. That's nice. I can control what cell, row, or column to format now. If I want to be in a date format then I must apply the Format of cell vi after the easy Excel table vi.

  It sounds like a stupid race around me...

• How do I exit my a plain text, column 2 'page' of the CF Report Builder 10?

  FIRST

  I have a cover page in the Report Builder 10, report header and the size is 11 x 8.5.

  The footer contains labels for the display of the name of the company, all rights..., straight copy..., report name, and date.

  I would like to show it, so I know it will work. The cfoutput tag works only on queries... so is there a CF method to display "header and footer"?

  This experience contains a file with the request .cfm and .cfr files, using Crimson I see the file (test1.cfm)

  test1.cfm:

  SELECT

  tblStateProvince.State, tblStateProvince.Name, tblFacility.Name such as FName, tblFacility.City, tblFacility.PostalCode, tblFacility.Address,

  tblFacility.OID, ContractNumber, ContractEffectiveDate

  Of	tblFacility INNER JOIN tblStateProvince ON tblFacility.OIDStateProvince = tblStateProvince.OID
  WHERE	(((tblFacility.OID) = 37667));

  Here is where I tried to assign the string to the "labeling" of the report header.

  tblFacility.Name = "Yosemite Valley, LLC"

  TReportStaticText104 = ' #tblFacility.Name # '.

  ------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ ----------------------------------------------------------------------------------

  SECOND

  tblFacility.OID = "#tblFacility.OID #Session.» (initially, I had this in the query, but the "Builder objected (SEE 10 runs this query).") Why is - what the "builder" can't solve this assignment?)

  ------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ ----------------------------------------------------------------------------------

  THIRD

  
  

  In (CFeclipse - Browser View) test works except that it displays the query... so that means if there is no field/tblFacility.Name data referred to on my first page, I can't load the label... Right?

  The 'controls' are not something I can program?

  Do not ColdFusion syntax include in the text of the query in the query designer.

  The error message said you that MS Access does not recognize the text of your query.

  Note that the example code I posted must be entirely contained in one. CFM file.

  See you soon

  Eddie

• Safari, Chrome report different errors in Javascript includes on board. Sudden death syndrome Javascript.

  I get Javascript errors all the time, if I try to add the code. I call it sudden death Syndrome Javascript. SJDS comes from nowhere with reports of bad code in the Edge file includes.

  Currently, I'm trying to work errors that EA seems to lie all the time and some time. I have rebuilt some symbols from scratch. Clean, pleasant and attentive. Nothing extra, no multi Add/Remove. No code.

  During the recording of the iterations and wishing to display version 9, suddenly, nothing appears in the browser preview. I save, close, reopen, erased, rebooted... you name it. Reopening of EA, I get message "Please check your page Javascript errors. I'm very practical, so I looked in the registers of the browser and got these 2 VERY DIFFERENT ratings of error: I am a designer. I don' t know the first thing about solving a TypeError Eception. However, I discovered the referenced, minimized file in Edge includes, is the same in all projects. I replaced it with a known good, but without effect.

  
  

  HOW can animate dashboard damage its own code - Edge Includes? I don't understand. JSDS is apparently at random, and it is fatal that I can tell.

  
  

  How can I get these errors Javascript from the past?

  Reports of chrome:

  Eception SyntaxError: Duplicate the property data in literal object not allowed in strict mode GV - 9_edge.js:12 / / I deleted the duplicate but - uh - how what can happen. Def. the user error not.

  Eception TypeError: Cannot read property 'scene' of undefined edge.5.0.1.min.js: 133 / / The Stage? How can that even be?

  Eception TypeError: Cannot read property 'stage' undefined edge.5.0.1.min.js: 126

  Safari reports:

  [Error] SyntaxError: attempted to redefine the property 'comfortaa, sans-serif'. / / What IS TOTALLY NEW, AFTER HUNDREDS of ITERATIONS USING THE SAME ADOBE PROVIDED FONTS. (facepalm)

  (anonymous function) (GV - 9_edge.js, line 12)

  [Error] TypeError: undefined is not an object (assessment 'this.data [this.name]')

  init (edge.5.0.1.min.js, line 133)

  (anonymous function) (edge.5.0.1.min.js, line 66)

  G (edge.5.0.1.min.js, line 69)

  loan (edge.5.0.1.min.js, line 65)

  load (edge.5.0.1.min.js, line 62)

  reminder (edge.5.0.1.min.js, line 62)

  (edge.5.0.1.min.js, line 38) n

  (anonymous function) (edge.5.0.1.min.js, line 38)

  p (edge.5.0.1.min.js, line 34)

  OnLoad (edge.5.0.1.min.js, line 41)

  [Error] TypeError: undefined is not an object (assessment 'a.data [b.SID]')

  h (edge.5.0.1.min.js, line 126)

  s (edge.5.0.1.min.js, line 127)

  _getTimeline (edge.5.0.1.min.js, line 138)

  O (edge.5.0.1.min.js, line 69)

  rR (edge.5.0.1.min.js, line 65)

  (anonymous function) (edge.5.0.1.min.js, line 69)

  e (edge.5.0.1.min.js, line 43)

  K (edge.5.0.1.min.js, line 69)

  V (edge.5.0.1.min.js, line 92)

  [Error] Could not load the resource: the requested URL file:///Users/hellofuture/Documents/Ideaful/GV-GrammarVision/dev2/GV-9/edge_includes/edge. 5.0.1.min.map was not found on this server. (edge.5.0.1.min.map, line 0) / / It is also strange way.

  Background:

  Frankly, I spent * a * many times things reconstruction. I uninstalled and reinstalled EA, too. I got other errors

  I have not upgraded anything, etc. I am adopting EA as a new user.

  MacOS Yosemite - cloud creative - edge animate CC 2014.1.1

  Safari Version 8.0.4 (10600.4.10.7)

  Chrome Version 41.0.2272.104 (64-bit)

  Other details:

  Project consists of some SVG files imported, bunk with text.

  External library: no

  I am ready to share by PM.

  Other errors:

  I get many kinds of error messages all the time - too 'out of the blue ".

  For example: path not taken in charge... of a file that has been no problem in the past.

  C++ errors

  I really, really, really want to use PhoneGAP Build so I suffer through this.

  How can I get these errors Javascript from the past?

  Thanks for any help.

  Post edited by: Grace Bollmann

  I can open it again after the deletion of the reference to police in double.

  Hello

  2 errors can be explained as follows:

  [Error] TypeError: undefined is not an object (assessment 'this.data [this.name]')

  [Error] TypeError: undefined is not an object (assessment 'a.data [b.SID]')

  (1) API of the reading edge:. data() is missing.

  Dashboard API: Adobe Edge animate API JavaScript CC

  

  (2) solutions.

  • You can replace. data() by. attr(),.
  • or you can add jQuery through the edge (the library panel) user interface.

• Report Builder is not not as forms of fusion middleware & installation reports

  Dear all,
  
  I installed oracle fusion middleware forms & services ofm_frmrpts_win_11.1.2.1.0_64_disk1_1of1 report.
  
  generator of form is there, but the Report Builder is not there? Why? where is the generator of reports?
  
  Kind regards.

  Hi Maahjoor,

  Try from Report Builder using the rwbuilder.bat in the directory % ORACLE_INSTANCE%\config\reports\bin\.

  If you still have questions to
  (a) save the file rwbuilder.bat to %ORACLE_INSTANCE%\config\reports\bin\
  (b) now change file rwbuilder.bat the file % ORACLE_HOME%\bin\rwbuilder.bat, by manually hard code the correct paths for:

  $$Instance.directory$$\config\reports\bin\reports.bat
  $$Instance.oracle_home$$\bin\rwbuilder.exe

  In other words, if your instance is C:\Oracle\Middleware\as_inst1, then change the rwbuilder.bat to take into account:
  C:\Oracle\Middleware\as_inst1\config\reports\bin\reports.bat
  C:\Oracle\Middleware\as_inst1\bin\rwbuilder.exe

  (c) and then re-run the file updated the rwbuilder.bat to the % ORACLE_INSTANCE%\config\reports\bin\.

  If it still does not work...
  Follow these metalink 2 ID, they will be useful

  * REP-50125 "rwbuilder.conf:java.lang.NullPointerException" try to Open Report Builder [Article ID 1532120.1] *.

  * 11g on MS Windows error generator with: REP-50125 [Article ID 1059638.1] *.

  Concerning
  Fabian

• Report Builder charts of Oracle in Oracle Developer Suite 10 g

  Hi everyone, please, help me.
  
  I'm working on Oracle 10 g (10.1.2.0.2). I need to insert graphs (pie, bar etc).
  I browsed the forum and I fell on the thread below:
  Report Builder charts of Oracle in Oracle Developer Suite 10 g
  
  He suggests that we should download demos 11g (http://www.oracle.com/technetwork/developer-tools/forms/downloads/index.html)
  and discover the BI graph.
  
  BUT the problem is that the installation in the zipped folder guide says very prerequisites for installation of the demo is to have 11g. and it will not work for 10g.
  If this is the case then how I insert charts. I need to complete this work as soon as possible.
  
  In my research, I also found the thread below where people say that this will work also for 10g.
  http://CN.forums.Oracle.com/forums/thread.jspa?threadID=2247043
  
  And if possible can anyone explain in brief or detailed steps. It will really help a lot of people.
  
  I hope that you understand what exactly I wanted to say. Let me know if any questions... Please help me and many others who are struggling.

  You can ignore this error at design time.
  When running, display the Java console to see if the errors are triggered.

  François

• still reports an error

  Hei!

  
  I made a DVD with a menu and everything was fine when I preview it,.

  I wanted to build the DVD, again didn't report all workplace issues

  bulding began and after a while the process stopped, again was reported an error unknown and collapsed to a dvd

  and when I then tried to preview the project itself, it reports an error again

  If someone could explain this?

  Thank you very much United Nations advance

  Aurélie

  First thing to do is to say to create an ISO hard disk file, and then use the free http://www.imgburn.com/ to burn this image to a disc

  If it works, it means that you have installed software that 'took over' communication with the DVD drive, and still won't

  I don't have this problem, so I don't really know what software does that... but I don't know the work around is to my first line

• CF8 Report Builder is duplicative with the subreport parameters

  I encounter this problem to launch Report Builder Windows XP:
  
  1. create a report.
  2. create a subreport that has input parameters.
  3. Add the subreport to the main report and set the parameters to the subreport.
  4. Save and close both files.
  5. open again the main report file.
  6. look at the list of parameters to subreport to the linked subreport
  
  Regularly, I find that in this scenario, any subreport parameter that I initially set was duplicated, such as if, I started with:
  
  varOne - #query.foo. #
  varTwo - #query.bar #.
  
  As soon as the reopening of the main report and the subreport parameter list insepcting I'll see:
  
  varOne - #query.foo. #
  varTwo - #query.bar #.
  varOne - #query.foo. #
  varTwo - #query.bar #.
  
  Which causes errors when I try to run the report.
  
  What the patch schedule for Report Builder?

  This problem seems to be fixed in build 181436 reports generator

• How to publish a report created by the Oracle Report Builder

  Hello world
  
  My colleague and I have tried to use the Oracle Report Builder to replace our existing report builder of our ERP system. We have already created the report in Report Builder from the suite of development.
  
  What we are looking for is a similar solution such as Microsoft reporting services;
  (1) create models of corporate report
  (2) and then download the template files to a location (for example, the folder on the server)
  (3) then all users in the company can access it through a web browser with a few fields which they can enter certain critiria (e.g. order number).
  (4) then send it to the printer and print out must stand exactly as the model.
  
  
  Unfortunately, we had very hard time trying to find out what it takes and how to publish this report in Oracle we have created. We spent 15 hours on it, but no results.
  
  15 hours we tried to install the 'Oracle' service, but finally, my colleague said that it was not what we are looking for you, "report Oracle service" is used to the error of the hosted application on the server, not to publish the report of company created by the "Oracle report bulider.
  
  
  We use Oracle Database 10 g for the LES quite a long time already. We had setup the Oracle Developer and the installed Application Server.
  
  Could someone tell us please what kind of service Oracle we are looking actually. Other guides any suggestion and installation are also the most welcoming.
  
  
  Best regards
  Bryan

  Hello

  If you want to be able to run your reports on the web, the best solution is to use the 'Oracle Application Server'

  http://www.Oracle.com/technology/software/products/IAS/htdocs/101202.html

  For example, the stand-alone edition of 'forms and reports Services '.

  Then, use the reports Servlet to submit applications for running a report server:

  http://download-UK.Oracle.com/docs/CD/B14099_17/bi.1012/b14048/pbr_run.htm
  Application server Oracle® reports Services publishing reports to the Web
  10g Release 2 (10.1.2)
  B14048-02

  13 queries in race report

  http://www.Oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwwhthow/HOWTO/runPrint/deploy_rpt.htm
  Deploy a report

  Concerning

• Whenever I open Firefox, I had a small window to appear and reports following error "TypeError; Components.classes['@ [' softage.ru/Skype FeExtensions; 1] is undefined

  Whenever I open Firefox, I had a small window to appear and reports following error "TypeError; Components.classes['@ ['softage.ru/Skype FeExtensions; 1] is undefined

  Remove/disable Skype add-on

  Uninstalling the modules

  • https://support.Mozilla.com/en-us/KB/uninstalling%20add-ons

  Cannot uninstall an add-on

  • https://support.Mozilla.com/en-us/KB/cannot%20uninstall%20an%20add-on

  Check and tell if its working.

• Firefox answers more frequently. I have several reports of errors but don't know what to do with them.

  I have several reports of errors, but I don't know how to reach them. I hope someone can help me with this all out.

  Have you checked this thread?
  https://support.Mozilla.com/en-us/questions/859406

  I had a similar problem, and he treated this thread.

• Toshiba 55VL963 - TV USB function reports write errors

  Hello

  I have 55vl963 TV with latest firmware 6.9.MD.1

  I'm trying to get lists of channels and other settings using the function of the cloning Hotel.

  However, it seems the TV to USB function often reports write errors (or sometimes ends successfully, but generates corrupted files).

  I tried different media USB, formatted in FAT16 or FAT32.

  Thanks for any help to solve this.

  > I'm trying to get lists of channels and other settings using the function of the cloning Hotel.
  The TV seems to support two USB 2.0 ports.
  Have you checked this Clone Mode using different USB ports?

  However, I guess that data write the problem could be related to the used USB flash memory key.
  Even if you have tested some different USB media, I guess that there are no other possibilities as to test another stick of memory.

• website valid W3C, initially no error reported by the developer toolbar. But by right clicking (giving the menu validation), the toolbar reports two errors: width and height. Despite the fact that each page is posted! The forum for the toolbar, this i

  website valid W3C, initially no error reported by the developer toolbar. But by right clicking (giving the menu validation), the toolbar reports two errors: width and height. Despite the fact that each page is posted! The forum for the toolbar, it's supposed to be a browser error. So, how can it be fixed? I use FF 3.6.6

  This has happened

  Each time Firefox opened

  is after upgrade to 3.5?

  http://chrispederick.com/forums/viewtopic.php?PID=8239#p8239

  You create a new profile and install only the extension Web Developer, as recommended Chris?

• Photosmart 7510 everything works except the scanner. scan reported an error Impossible to open the sessio

  scan reported an error "Unable to log on to the device" I really need to get access to the whole reason for this purchase scanner.

  I downloaded the updated HP for Mac drivers and the printer has been installed without any additional problems. Thank you