Excel series

Similar Questions

• GS752TS SSH connection

  Hello world!

  I had a GS752TS switch and I want to manage it remotely using SSH.

  But I can't find information on the SSH connection.

  I use Putty and it cannot connect. I also looked for the switch configuration: maintenance-online troubleshooting, but I can't find option diagnosis remotely.

  Is it possible to manage this remote switch and if so, how?

  Thanks for your response!

  Hi Ahiro

  Welcome to the community!

  You can't manage a Smart Switch managed using SSH or command line. Instead, a smart switch is managed Web interface (GUI) through HTTP used.

  Command-line (CLI) and Telnet/SSH are one of the differences between Smart switches and managed fully managed.

  If you need SSH on Putty, you should take a look at our excellent series M4100, profitable L2 + fully autonomous here managed switches:

  http://www.NETGEAR.com/managed

  Kind regards

• I want to add a 3rd monitor to my laptop HPdv6700, but my graphics card does that 2 screens

  I want to add a 3rd monitor to my laptop HPdv6700, but my graphics card allows 2 screens to buy a new graphics card to allow 3 screens

  Hey titanman78,

  I certainly understand where you come from. I am a player myself and it would be great to be able to use 3 monitors, but unfortunately, it is simply not cost-effective. The graphics chip of your laptop is soldered to the motherboard. To upgrade your graphics chip, you need to buy a new motherboard and I hope that it fits within the confines of the works and with other components such as the WiFi card, USB card, card reader SD and the power button. It would be difficult to find if it is available to all. The other option might be if you could find a repair business card mother who would be willing to guarantee their work enough to unsolder your old graphics chip and solder on a new graphics chip. There still no guarantees with that however, that he would work with the chipset, processor, and the HP Framework software.

  Generally for an 'Advanced' like that game, a customizable desktop computer is a better option. I had to break myself and save money to build my own recently. Carey Holzman has an excellent series of tutorials on creating your own gaming PC on Youtube. That's if you're an amateur. If not, look for pre-made desktop computers with AMD Eyefinity - what is AMD Eyefinity?

  Let me know if you have any questions

• Terrible problems of conversion of the site to meet the new version of Muse (and other important observations)

  Dear all

  I was very pleased with the new version of sensitive Muse.

  I had downloaded the pre-release version and tested it and presented my comments as a good obedient of Muse Web site designer, after all, we must all contribute to get the best system that actually works.

  Is the day of release and I've updated Muse via my desktop CC application.

  I watched videos Adobe make reference to liberation, that everything online and even read through the excellent series of video training sensitive to themes of Muse.

  Only some of my clients gave me their business with the understanding that I would like to convert their sites Adaptive desktop, Tablet and phone versions to fully responsive as soon as the new version is out.

  A customer has a big launch very soon which also requires the contents of the site changes so I decided to tackle this site first.

  I made a copy of the site and opened it and it converted or whatever Muse only when you open an existing site in the new face.

  I changed all the settings, site, properties etc etc in the offline version of the page.

  Then, I have worked to make the Master suited page.

  It is then that my nightmare began.

  Nothing seemed to work as described and the biggest problem was the clamp that was so slow, late, dried, etc., it was almost unusable.

  In any case, after 18 hours, the page master has been made and when you preview in the development tools Google Chrome seemed reasonable enough.

  Why 18 hours you might ask, well partly because of the clamp problem mentioned previously, but the entire system is extremely inefficient in the way it works with so many questions to consider whether to apply or not apply to each object and a constant in Google Chrome preview as you could not trust what has been is displayed on the screen of Muse.

  Next challenge was to convert the content of the home page. It wasn't a page complex and only consists of 6 pieces - pictures, text and a button on the State.

  I have applied all the settings and slide the clamp to slightly reduce the width of the browser, that when I had to move showed major problems on the page immediately:

  • Huge empty spaces appeared
  • The objects did not adapted as it should and that I had seen in so many videos - so, for example, if a block of text was next to an image they immediately went massively out of alignment when you drag the clip
  • The finished status button on the margins of the page
  • Etc etc.

  In any case, after 6 hours of tearing my hair that I give up and contacted Adobe.

  They began a session remotely and said I had everything set correctly and that Muse wasn't as the developers had planned.

  Finally, they said by e-mail on the .muse file, which I did, and of course I'm sitting here with a looming deadline and still no answer on how to solve the problems, which no doubt all my other existing sites will not have when I come to convert.

  Other problems discovered during my tests to date are:

  • Right click for very slow service
  • Slow to open library (more despite being told you can download several items from the library when you try to load too, a lot (by Muse) everything freezes Muse and you force a fence via the Task Manager)
  • Adjusting the position of the breakpoint by right clicking on the breakpoint window very slow, late development and jerks (IE just like the clip)

  In addition, I was absolutely horrified to see that there were other issues, especially since many objects react at all:

  • Image do not respond in the envelope
  • Compositions of
  • Slideshows
  • Forms
  • Google maps has only reactive width no height as well
  • Google Map inserted via insert HTML while I updated sensitive width, there is not (I guess the code must be added to make all insert sensitive html and some guidance on what could be this code would be useful Adobe, including a video on the subject feature Muse is so limited you must add a large number of html).
  • YouTube has only reactive width no height so completely useless
  • No effect of scrolling on Muse reactive
  • In addition, virtually all 3rd party widgets Muse themes et al. do not work with response as they say they are waiting for Adobe to undertake the necessary work on base first. So any site that uses widgets cannot be converted (and almost all do so because of the lack of functionality of Muse)

  This Muse is not really sensitive and it is useless to creation or conversion of sites until it is.

  Also, I was extremely disappointed to see that despite me and a lot of other designers asking some features via the Forums Muse he had not been included. This includes, but is not limited to:

  • Draw ellipses (& circles) and polygons that you can in InDesign in forms or frames of image
  • Site search function
  • Images do not clearly appear in the Muse until preview
  • No password protection function
  • Form always using reCAPTCHA 1 not 2
  • No installation on the forms file upload
  • Slideshow of legends still not discoloration with images
  • No idea if all the SEO issues as I cannot finish a site and scan

  What a disappointment is complete.

  So, for me, sorry Adobe not usable as a form builder free site responsive until much more work has been done, hopefully very soon.

  Kind regards

  Mike

  I just spent two weeks, putting in place a sensitive muse site. I am gray, tired and frustrated. I was so excited to make this project work.

  I wish I had read these articles earlier.

• No export to interactive PDF fonts

  I made a document in indesign, and when I export to interactive PDF, fonts, etc key... changes.  EX I use leading font 18 Arial Black with12PT in indeign and when I export the document and open it in Acrobat reader or Acrobat Pro police police 12Pt Arial (NOrmal) and 14.4 (Default) leader.  Any ideas on that?  How can I keep the fonts that I use in indesign?  The Dungeon of pieces interactive no fonts that I use her does not affect the interactive elements.

  The problem is not InDesign, that's the limitation of fonts in PDF Forms. If you open the properties of the text field for your text field in Acrobat, you will see something like this:

  

  While you can choose any font on your system, you should take those above the line. I just looked excellent series of videos of Claudia McCue on Acrobat DC on Lynda.com. Here is what she said: "the fonts that are above this line are the fonts that will be accessible to anyone with Acrobat Reader or Acrobat Pro and Acrobat Standard. All policies below this line are the fonts that are active on your system. And that they are not active on someone else's system. And which may result in text that is not displayed or does not match. She asked type of disorder, so even if it looks dull, go ahead and take one of the dull fonts above the line. »

  Also note that there are no options for line spacing at all. If it's really not for lack of InDesign, but a limitation in PDF Forms.

• New vCenter Server install fails - SSO

  I use a new system nested for a lab at home.  I'm under Workstation 9 with the latest version of vCenter.  I have the ms SQL all set up and verified.  The clocks are set to the same time a few seconds apart.  However, during installation when I get to vCenter single sign on Information, he returned with the error:

  Incorrect entry - a command line argument is wrong, a file is not found or the spec file does not contain the required information or the clocks on the two systems are not synchronized. Check vm_ssoreg.log in the temporary folder of the system for more details.

  I checked the two KB with information about this,

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2033880

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2033875

  and after the steps, I still can't pass it.  Then, I found this blog, http://blogs.vmware.com/kb/2012/09/vcenter-server-5-1-installation-fails-with-a-wrong-input-and-certificate-already-expired-error.html#.UWZSkJOThyI and reading, I get the assumption this isn't a big deal, however, I still can't complete the installation until it is fixed, at least as far as I know.

  I'm pretty new to this forum and to implement vmware but learn a lot, but this one left me speechless right now.

  Reflections on how to solve this problem, other things to test, etc.?

  David Seaman playing excellent series of blog on the configuration is

  http://derek858.blogspot.com.au/2012/09/VMware-vCenter-51-installation-part-1.html

  Michael Webster on his blog also has a great serise on certificates

  www.longwhiteclouds.com

• The labels inserted with form elements?

  The excellent series Missing Maual says DW CC 2014 that: creating forms, DW will also write label code when you ask him to insert the entries as a text box.  My CC DW 2014.1.1 (on Mac) does not, definitely.

  What is done?  The Missing Manual is simply wrong?  This feature has been removed?  Or...

  Appreciate the help, to understand where we are on that.

  Thank you, David Allen

  See if this video helps to clarify.

  Make the HTML5 forms in DW CC (video)

  http://TV.Adobe.com/watch/learn-Dreamweaver-CC/HTML5-forms-workflow/

  
  

  
  

  Nancy O.

• Synchronization of a song to the question of the video (installation of game)

  Hi all, before I ask for help, I hear deep.

  I use hearing aids to help me hear sounds (noise background, so not 100%, especially) but I can listen to kind of songs with lyrics. As when you normal people listen to music, you feel good. I feel it too.

  AAE or PP, I can see the Audio waveforms and I can tell where the beats. I can create keyframes based on some time and create effects based on these key frames.

  These things kind of helps me, but... since I save gameplay of slow (it usually takes 2 to 5 seconds for a player to die) in this game.

  So I cut the clips on my gameplay, but each clip is long enough. And as far as I know, most of the songs I like a lot of beats... Literally.

  I don't know what is the ideal approach to do this. I would like to create a good editing so that the public love him. So, here's a nice challenge for me...

  You can speed up your clips using the time remapping effect.  If you have not used before, you you read up on it a little before it makes sense.  It is in aid of the AE.

  I wouldn't be surprised to learn that the first can do it too, but I'm a guy FCP/Avid; not well versed in the first.

  And since many video tutorials for After Effects are not of great use to you - people are talking a lot in them - I recommend googling Chris and Trish Meyer, or go to their website, the Coalition video Pro.  They publish an excellent series of books on learning After Effects.  You might find them useful.

• Reservations and their effect on memory in 4.1

  All the:

  I read up on top of the excellent series of Frank Denneman on oversized VM and their impact.  I started to read more in-depth VMware documentation on it, and I came up with a question that I can't find the answer to yet.  Maybe someone here knows the answer.

  If I have a Windows VM with a large reserve, given that the zeros the memory at startup of Windows, it will take the entire booking at the front.  My question is how does the GST and zero-page effect sharing only the affected memory?  I understand that once a machine has been attributed to his full booking, that memory will not be inflated, but these other features will reduce the impact on the memory of my physics?

  Thank you!

  
  Brandon

  Hey Bradon,

  Thanks for the add-in.

  Online reviews:

  If I have a Windows VM with a large reserve, given that the zeros the memory at startup of Windows, it will take the entire booking at the front.

  Good thing to know is that reserved memory is not equal to the memory allocated in all cases. If a page is shared between two vm of the allocated space is 0.5 pages, but the two or a single virtual machine will have a dedicated page.

  Yes, it will reduce the amount of memory without reserve in the host\cluster. Unreserved memory is used by CAC to determine if it can market a virtual machine with a reserve of memory. It has nothing to do with active memory real or affected memory.

  My question is how does the GST and zero-page effect sharing only the affected memory?

  Normally, GST will collapse and share each identical to the host page. Unfortunately, if the virtual machine uses HW MMU (because of IVR AMD and Intel EPT) the VMkernel uses large pages. A great page (2 MB) is not shared by TPS. vSphere 4.1 uses zero page sharing, Duncan will display a very interesting post soon on zero page Thunder, so I don't want to steal the Thunder.

  Small pages supported by large pages have precomputed tips for GST, so in case of real memory contention (less than 6% of free memory space of the host) the VMkernel might Exchange pages. But the VMkernel has a share before the swap and a compress before the exchange policy. If ESX breaks the large page and subsequently share all the same pages using precomputed indicators before they are swapped.

  Because of this policy, sound very likey see page very little share in vSphere 4.1 on systems using IVR AMD or Intel EPT when the memory of the host is under committed themselves. Only when memory pressure is reached, mass page sharing occurs. Contrary to popular belief, the ability of reclaimation of memory page sharing in esx is not diminished, it's just postponed until free memory is really low.

  I understand that once a machine has been attributed to his full booking, that memory will not be inflated, but these other features will reduce the impact on my physical memory

  Correct, and that's exactly what you want. A reserve is a warranty of physical resources, if the system knows the claim or not.

  Please read http://frankdenneman.nl/2009/12/impact-of-memory-reservation/ for more information on memory reservations.

• AWR report analysis

  DB version: 10 gr 2
  
  After watching Top 5 wait events and SQL Statistics, what is the next most important thing I should look for an AWR report?
  

  It would depend on the top events of the page you saw. For example, if you saw the events of 5 waiting albums, he had very high DB file scattered read, this means that there are statements that go mainly to access the complete table. You must search on these queries. Or if there is a high Contetion lock, for example, Shared Pool latch Conteions, this means that there are many sttement that is intended for hard analysis and dispute this lock of. So, you should look for these sql who are cnstants more and do not bind variable.
  So this isn't a standard way, but it's according to what you see. On the blog of Jonathan Lewis, there is an excellent series of how to read the Statspack report. I suggest to read. This would make a good base to cross with AWR report also.
  HTH
  Aman...

• F2200 SERIES PILOT CLASHES WITH EXCEL 2010

  When I plug my HP F2280 printer, the driver that is installed is series F2200.
  The printer works fine.

  However, Microsoft5 Excel 2010, crashes after that, whenever I try to open a document...

  When I remove the device, Excel files open fine. However, of course, I can't print.

  This will not occur with Microsoft Word or powerpoint etc.

  You let Windows automatically installs the driver, or if you have installed the drivers from the HP website. If you have not installed the drivers from HP, I suggest you:

  1. disconnect the printer from the PC and check that it no longer appears in devices and printers in Control Panel.

  2. download your printer drivers / software * HP here:

  http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3390947#N191 .

  (Make sure that get you drivers 32 or 64-bit according to your version of the Windows)

  3. install the drivers/software from HP.

  4 reconnect the printer to your computer.

  * To see if you're running 32-bit or 64-Bit Windows click:

  Start-> Control Panel-> system

  Then look at where it says, "System Type".

• How can I create a series of blocks of text using the Excel list values?

  It is first of all, the first script I am trying to write from scratch. I'm completely green at the script and I picked up a few bits of ID Adobe scripting guide, but nothing has really stuck still relating to this particular goal.

  My supervisor maintains a master list of advertising space, with the name of the account, is the width of the space, and how space is the height, in an Excel sheet. These spaces can number in the hundreds, and I'm stuck manually drawing a rectangle for each space, which takes a lot of time.

  I would like to create / helped to create a script that will take these values and "magically" to draw these spaces in the form of blocks of text, with the width (in columns) and the height (in inches) defined by the values in the main list, as well as the name of each account in the subsequent text frames.

  The script didn't necessarily need to be able to pull the values directly from the Excel sheet; Can I transfer a file text if necessary, or directly in the script, values he change because I need it. A great thing (if she is not able to pull directly from an Excel sheet) which is the number of spaces a week changes, and so do the accounts and the width and height. Accordingly, it would be ideal that values of the sheet could be modified easily, in order to create a new set of spaces as necessary.

  Positioning for each space is not crucial, only the height and width. If they were all on top of each other on the same page, it is a result for me. The main idea is to not have to draw them all manually, one by one.

  For me, this looks like a command, but I hope that some experienced there Scripting Guys can help me, because I want to become experienced as well.

  Thus, the TL; DR version:

  -Script to draw a series of text blocks.

  -Size of the text boxes should be defined by the values width and height of spreadsheet Excel.

  -Text blocks must have the account name as content (from account in the Excel worksheet names).

  -Accounts, width and height changes every week in the Excel sheet, so must be relatively easy to exchange all values.

  -Width values on the Excel worksheet columns. It would be ideal that the script could turn those numbers into multiples of columns as necessary.

  -Script (optionally) can take values directly from Excel sheet.

  -Script (option) can set the fill color for the gray text frame. (If it works as I think, I could just select all the resulting images of the text myself and put them all to grey at the same time... I'm not lazy as )

  Thanks in advance to anyone who can help in any way possible, even if it's just a little push in the right direction. This script will save 1 to 2 hours of boredom every week.

  Look like the perfect thing for the InDesign scripting.

  I copy content from Excel to a text file, for a format easily read in InDesign, and there will automatically be a TAB for each 'cell', just using copy and paste.

  Here is a piece of code, perhaps you could go on with (the addition of variable to change pages and the location on the page and other things).

  The readFileLineByLine function, can be easily reused with any function using "recall". You simply tell the function what you want to be executed for each line of text that reads:

  const COLUMN_WIDTH = 2; // Define the column width in inch
  
  var pageIndex;
  var textFramesExported; // not implemented.
  
  // Add a new dokument. Set myDoc to app.activeDocument to use
  // the current document instead of creating a new one.
  var myDoc = app.documents.add();
  
  // The doSomethingWithTextRow function is called upon for every line of text read.
  readFileLineByLine('c:\\test.txt', doSomethingWithTextRow);
  
  function doSomethingWithTextRow(row){
      // We expect the text line to be TAB separated (\t = TAB). We get that from just copying the contents of an
      // excel file into a text document.
      var cells = row.split('\t');
      var companyName = cells[0]; // The Company name in the first slot of the array
      var width = COLUMN_WIDTH * cells[1];
      var height = cells[2];
  
      // Create a new text frame for every row handled
      if (pageIndex==undefined) pageIndex = 0; // Count up when you have exported a number of texts, I leave this for you to do.
      var newTextFrame = myDoc.pages[pageIndex].textFrames.add();
      newTextFrame.contents = companyName;
  
      // The text frame is created in the top left corner.
      newTextFrame.geometricBounds = [0, 0, height + ' in', width + ' in']; // Top, Left, Bottom, Right 
  
      // You might want to move the textframes to other positions, keeping track of how many you put out per page.
      newTextFrame.move( [10, 10] );
  }
  
  function readFileLineByLine(path, callbackFn){
      var myFileIn = new File(path);
      if (File.fs == 'Windows'){
          // This was probably added to recognize UTF-8 (even without its start marker?)
          myFileIn.encoding = 'UTF-8';
      }
      myFileIn.open('r');
      var myEncoding = myFileIn.encoding;
      try{
          if (!myFileIn.exists){
              throw('Missing file: ' + myFileIn.fsName)
          }
          var ln = '';
          while(!myFileIn.eof){
              // Read the lines from the file, until an empty line is found [now as a remark].
              ln = myFileIn.readln()
              // if(ln !='' && ln!='\n'){
                 // Call the function supplied as argument
                 callbackFn(ln);
              // }
          }
      }catch(e){
          alert(e);
          gCancel = true;
      }
      finally{
          myFileIn.close();
      }
  }
  

  The file in C:\ in my example was recorded in UTF-8 format and looks like this (showing hidden characters):

  

  Post edited by: Andreas Jansson

• Dreamweaver / excel or access - how to get the series of html files

  Hello

  IM pretty newbe to dreameaver, any advice is appreciated.

  I have prepared a web page layout using dreamweaver. I also have a list of 200 lines with 4 columns in excel.

  I d like dreamweaver automatically create series of clean html files (no java or other technologies) only html and css, and use the data from the excel file.

  I d like dreamweaver to 'take' each of the cells of a row in the excel file and put it in its place for the layout (description3, description1, description2, description4). as the output, I d like to get 200 html files.

  I was sleeping me with options of database in dreamweaver for a few days and I had the feeling that the features are rather designed for someone who creates dynamic web pages and a database installed on a server. in one such case dreamweaver inserts... java, ajax and spry... (I don't know m) code that I don't want.

  Thanks in advance.

  I have the

  This may seem a little too complex, but you "could" export your Excel files to xml format and built pages by using spry data sets.

  In this way, you wouldn't need a database and the learning curve is perhaps easier.

  "Look at the demos of spry on the following link and the previous link to connect to the developers for ' how - to of.

  http://www.Adobe.com/devnet/Dreamweaver/?view=samples

  Using spry and export your data from Excel to xml format would mean just update your xml file to reflect changes you need for data to Web sites.

  HTH

  Note: in this way, you can use any server provider and there is no specific requirement.

  Post edited by: pziecina

• DeskJet 1050 J410 series does not Excel files print

  My printer does not print Excel files.  I have read some other posts that suggest to reinstall the printer driver I did.  My printer print Excel for awhile and then a few weeks later, it will not print again.  There is no error message.  The print queue displays a document to print, then just disappears.  I guess I will upload once againprint driver, but I don't understand why it keeps doing it.

  Hello

  Please uninstall the driver first by going to control panel-> programs--> programs and features, and then UN-installing from there.

  Download the latest driver full features software (please correspond to the version of the OS system pilot & 32 bit / 64 bit with the system and the PC OS).

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=Al-109412-2&mode=4&IDX=1&JumpID=reg_r1002_usen_c-001_title_r0003

  Re-install the software downloaded and see if the problem still persists.

  I hope this helps.

• want to 4500 all-in-one series

  I bought an envy4500 all in one series and after all tests and installation correctly, I had only one problem: when I print from excel files including 'grid' the printer will print all the lines in files. Sometimes jump the line grids, then print two or three grids correctily and back to the grid (lines). I made a copy of old copies and the copy was perfect.

  Thank you

  jbtpa

  Impression in 'best' or 'quality' mode should solve your problem.

  Alternatively, you can also use any other border style in Excel and it should print correctly.

  I would be grateful if this does not resolve your problem, or a problem on something other then Excel, border 'Style 2' in mode 'Normal' or 'Draft' hearing.

  Thank you!