Exception of HAL VA error

Similar Questions

• Windows root > \system32\hal.dll error on a laptop without cd player or cd when bought

  Hello

  Got a problem. My daughter has a laptop HP with Windows xp. She did a disk defragmentation and clean last night... today, when she turned her on she received a Windows root>\system32\hal.dll error message. We do not have a CD to restart from... and it has a CD drive in the laptop. I can't find how to get to the system restore point... Ive tried f10, f12, f9... r. I also went into the BIOS and there is only one option it to boot from... any ideas? any help would be great.  17 am very angry. Thank you!

  Hello

  Got a problem. My daughter has a laptop HP with Windows xp. She did a disk defragmentation and clean last night... today, when she turned her on she received a Windows root>\system32\hal.dll error message. We do not have a CD to restart from... and it has a CD drive in the laptop. I can't find how to get to the system restore point... Ive tried f10, f12, f9... r. I also went into the BIOS and there is only one option it to boot from... any ideas? any help would be great.  17 am very angry. Thank you!

  Fortunately, not all is lost here for you. You have several options. You will need to create a CD of the utility. (1), you can boot from a usb flash drive and run utility Cd or 2) you can buy a removable usb device cd rom and there. It's the best option, but instructions differ radically, so I need to know which is your choice of boot options to help you. You won't have a windows disk to perform the procedure.

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• Help start the old computer system32/hal.dll error not installed bugs not working-

  I want to transfer files from your old computer to new computer with Vista Easy Transfer.  In an attempt to start former computer, received the system32\hal.dll error.  I followed the instructions to fix proglem reboot, press / hold down f8, etc., but that has not worked.  I could reinstall the operating system Microsoft Windows XP Professional, including Service Pack 1. But if I do then I lose all files, documents, photos, everything from the old computer... at least, I think it's going to happen.  Can you tell me what are my options to ensure that I don't lose any of my data.

  This behavior can occur if one or some of the following conditions are true:

  By default in the [Boot Loader] section of the Boot.ini file is missing or invalid.

  Windows XP is not installed in the location specified in the Boot.ini file.

  The Ntoskrnl.exe file is missing or damaged.

  The path of partition in the Boot.ini file is not set correctly.

  General failure.

  The article below should help you solve this problem.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  You must have a Windows XP installation disk to perform the steps listed in the article above.

  Hope this helps

  Post back if necessary

  ___________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 1. Server error messages generated an exception 2. Internal error 0x800400FF to start Windows.

  Original title: 1. Server error messages generated an exception 2. Internal error 0x800400FF

  Running Win7 on Toshiba P500 SP1. During the installation of Paragon system backup 11, which allows me to designate a backup (z) USB drive, he made a full backup. Then, every time I start up Windows this program does not start with the error above, sometimes only one message and sometimes both. This program (always installed with disc manufacturers) worked fine until my C:/D: main needed to be replaced. Can anyone help?
  I think that maybe a Win7 program is may be damaged.
  zanadu1251

  Hi Zanadu,

  It could be a problem with the backup USB drive that you created by using the Paragon Software.

  I suggest you to contact Paragon as it appears after taking the backup. You can check the link to contact Paragon support team:

  http://www.Paragon-Software.com/support/

  Let us know if you have more queries on Windows.

• Does anyone know if reinstalling Windows 8 will correct the unhandled exception (eanomn.sys) kmode error

  Original title: KMODE

  Does anyone know if reinstalling Windows 8 will correct the unhandled exception (eanomn.sys) kmode error?

  This accident was connected to your ESET.  I delete the version current (2013) and install the latest available version.

• I get an Fatal Exception on start up error, and I can only run in safe mode on my dv6

  I get an Fatal Exception on start up error and I can only run in safe mode on my dv6, can someone please help?  I don't really want to reset to the factory settings I have to reinstall everything.  I tried to go back through the system restore, but it keeps telling me that there is no restore point?  I'm running Windows7 64 bit OS

  Thanks in advance.

  Hi Hazel,

  Start in Safe Mode, open windows control panel, open programs and features and uninstall Comodo Firewall (this will probably be listed as Comodo Internet Security depending on the version).

  Once completed, restart the laptop in Safe Mode .

  As before, open all programs, open accessories, right-click on command prompt and select "run as Administrator".  In the command prompt type the following commands and press enter after each one.

  Drivers CD                (Note that there is a space between cd and drivers)

  del cumon.sys           (Note that there is a space between the led and cumon.sys)

  output

  NOTE: If you get an error after entering del cumon.sys as the "specified path cannot be fouund", it's Ok.

  Restart the computer and see if Windows starts normally.

  Kind regards

  DP - K

• com.sunopsis.tools.core.exception.SnpsSimpleMessageException: ODI-17517: error in the interpretation of the task.  Task: java.lang.Exception 2: the application script threw an exception: com.sunopsis.core.SnpsFlexFieldException: ODI-15068: code unknown fl

  Hi Experts,

  I have a get the following error while SAP_ECC6 engineering reverse. RKM SAP ERP Connection Test is not poop to the top of the box of JCo, but I tested the SAP stand alone connection test. Please, any suugestions would be great. I changed I tried to change each flexfield but still the same error.

  com.sunopsis.tools.core.exception.SnpsSimpleMessageException: ODI-17517: error in the interpretation of the task.

  Task: 2

  java.lang.Exception: the application script threw an exception: com.sunopsis.core.SnpsFlexFieldException: ODI-15068: code unknown flexfield. Info OSB: Initialize line: column 0: columnNo

  Kind regards

  Anubhav

  Hello

  have you applied last patch of the FDMEE-SAP adapter?

  It will create the additional flexfields in ODI for you. Otherwise, you will need to create them by running sql insert statements.

  You will see them in the guide of BristleCone V4.0.

• Why I'm not able to associate the user defined exception with ORA-01403 error code

  why I am not able to

  Associate a user defed exception with ORA-01403 error code?

  declare
   myException Exception;
   pragma exception_init(myException ,-1403);
  
   begin
   raise myException ;
  Exception
  when myException  then
   dbms_output.put_line('raised due to myException ');
   end;
  /
  

  exception of ABC;

  *

  ERROR on line 2:

  ORA-06550: line 2, column 4:

  PLS-00701: ORACLE error-1403 of PRAGMA EXCEPTION_INIT illegal number

  ORA-1403 is an outgoing BOF NO_DATA_FOUND exception. And we used to NO_DATA_FOUND in pragma exception_init + 100.

  Thus, instead of the you can used this different exception code which is not associated with any exception.

  For example:

  declare

  Exception myException;

  pragma exception_init (myException,-7856);

  Start

  raise myException;

  Exception

  When myException then

  dbms_output.put_line ('high due myException');

  end;

• Windows xp sp3 system root of the Hal.dll error or not found after auto update of windows system corrupt does not load.

  12/07/2011 my system automatically downloaded a system update and rebooted when it restarted, it wouldn't load windows and gave this error message. What should I do? I tried to remove the hard drive and put it on another computer if I could look at the problem but I don't know what to do to fix. My backup information are on another hard drive in the original computer. I use Norton 360 for my backups.

  It is extremely unlikely, there is nothing wrong with your file hal.dll despite what says the error message (do not try to replace).

  It is extremely likely that XP just cannot find the fine hal.dll where it says to look for.

  XP is maybe not able to find the file, it's file system is corrupted (Norton that sometimes), or if your c:\boot.ini has somehow become corrupted and told XP to find files in never never land.

  You must first run a chkdsk /r on your distressed HARD drive and if that does not do it, you have to redefine your boot.ini file.

  If you have the drive in another machine, you can open the file c:\boot.ini with a text editor and copy/paste the content back here for analysis.

  You can also rename your file c:\boot.ini to something like c:\boot.ini.bak (so now you do not).  In a single partition installation, XP is not even a file c:\boot.ini to start.  He'll complain briefly, but always begin (unbelievers - try it).

  t can take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  I'll keep an eye on your Norton since when your charge again, Norton System may corrupt your file system again and you will have to repeat the chkdsk/r to repair (so you can set Norton).

  I put the drive in the original system and fix it there with the XP Recovery Console.  After all, it's where he has to work, right?

  If you have any bootable XP installation CD authentic where you can start the XP Recovery CD of Console, you can make a bootable CD from the Console of the Recovery XP (no XP media required).

• While booting XP, do "Windows - no disk Exception Processing message c0000013" error

  During the first part of loading Windows, I get "Windows - no disk Exception processing message c0000013; Parameters 75b6bf7c 4 75b6bf7c 75b6bf7c ".  Then I have the options "Retry, Cancel, continues.  Will work only "continue."  Windows will not load until I have deal with this message.  The message reappears while other applications are loading.  Simply, this started happening about 2 weeks ago and have tried everything, except food.  I don't know what caused this error, but I want to fix it.

  Thank you. Until I'm your response that I tried my PC Doc Pro ver 5 and it seems to solve the problem.  However, I went into the registry and made the proposal to change anyway.  Then, I created a restore point and restarted. Thanks again.

  todrico

• Receive the Exception on a TokenID errors

  I use the workflow in this link: http://www.vcoteam.info/articles/learn-VCO/176-how-to-retrieve-workflow-execution-details.html to retrieve the details of execution workflow. Thanks Burke. I want to be able to print any error "Exception" which has produced also to System.log. How can I do this?

  Here is the same code with fixed bracket:

  var tokens = requestFlow.executions; // Each execution is a "workflowToken" object
  for each (token in tokens) {
    try {
      if (token.isStillValid) {
        System.log("");
        System.log("==== Checking token ====");
        System.log("Start Date: "+token.startDate);
  
        if (token.endDate != null) {
          System.log("End Date: "+token.endDate);
        }
        if (token.exception != null) {
          System.log("Exception: "+token.exception);
        }
      }
    } catch(ex) {
      System.log(ex)
    }
  }
  

  I also added a few lines to print the property exception to the workflow token (see the last statement in System.log () above). I guess that's what you want.

• Subsidiary ledger of the Exceptions narrow period report ERROR

  Hi all
  When I try to close the period April 10. Demand is filled with the ERROR.
  Please find below the log file output.
  
  It clearly mentions
  WARNING! Due to the high volume of data, out of memory exception... *.
  but this means that if she runs in the rush hour not because it ends successfully.
  
  
  
  
  
  ---------------------------------------------------------------------------
  Subledger accounting: Version: 12.0.0
  
  Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
  
  Module XLAPEXRPT: State of Accounting Assistant close period Exceptions
  ---------------------------------------------------------------------------
  
  Current system time is May 30, 2010 12:04
  
  ---------------------------------------------------------------------------
  
  OPE data engine Version No.: 5.6.3
  Resp: 50559
  Org ID: 101
  Request ID: 3423858
  All Parameters: P_APPLICATION_ID=101:P_JE_SOURCE=All:P_LEDGER_ID=2021:P_LEDGER=KGL_Ledger:P_PERIOD_FROM=Mar-10:P_PERIOD_TO=Mar-10:P_DUMMY_PARAM_1=:P_EVENT_CLASS_CODE=:P_EVENT_CLASS=:P_DUMMY_PARAM_2=:P_JE_CATEGORY_NAME=:P_JE_CATEGORY=:P_MODE=W
  Data model code: XLAPEXRPT
  Data model Application Short Name: XLA
  Indicator of debug: N
  {P_JE_CATEGORY =, P_EVENT_CLASS =, P_JE_CATEGORY_NAME =, P_PERIOD_TO = Mar 10, P_MODE = W, P_DUMMY_PARAM_2 =, P_DUMMY_PARAM_1 =, P_EVENT_CLASS_CODE =, P_LEDGER_ID = 2021, P_PERIOD_FROM = Mar - 10, P_APPLICATION_ID = 101, P_LEDGER = KGL_Ledger, P_JE_SOURCE = All}
  Calls the engine data OPE...
  WARNING! Due to the high volume of data, out of memory exception... *.
  Please try again with scalable option or modify the data model runs in evolutionary mode... *.
  ********************************************************************************
  ---------------------------------------------------------------------------
  Beginning of the FND_FILE log messages
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  End of the FND_FILE log messages
  ---------------------------------------------------------------------------
  
  
  ---------------------------------------------------------------------------
  Options, AutoComplete, the request for enforcement.
  
  (1) PUBLISH.
  Post-processing of application 3423858 on node DEVTS as of May 30, 2010 12:07:50.
  Post processing of request 3423858 failed at May 30, 2010 12:07:52 with the error message:
  Failure of one or more shares of post-processing. For more details, see the OPP service log.
  --------------------------------------
  
  
  End of query options AutoComplete.
  
  ---------------------------------------------------------------------------
  Simultaneous request ended
  Current system time is May 30, 2010 12:07:52
  
  Concerning
  Musaddaq
  
  Published by: mustuq81 on May 30, 2010 02:21

  Hello

  Please see these documents.

  Note: 737311.1 - how to configure the crawl account report in version 12 for important statements
  Note: 838810.1 - error in the accounting period auxiliary end exception report
  Note: 952747.1 - R12 XLAPEXRPT great book auxiliary period close relationship Exception error - out of memory exception
  Note: 726984.1 - R12: Performance problem with the auxiliary accounting closing period exception report

  Thank you
  Hussein

• Exception [fault], information = TypeError: Error #1009: cannot access a property or method of a null object reference.

  I create a 2D game and I created an event for when my character affects a gem, that she "sees" the jewel and the image is removed. However, when playing the game and the character key the jewel the game crashes and I am presented with the error.

  This is the code I added:

  public void collect (): void

  {

  If (FireBoy.hitTestObject (Green))

  {

  Green.parent.removeChild (Green);

  }

  }

  
  

  I checked where the error comes from and apparently the error lies on the line Green.parent.removeChild (Green);

  What should I do to fix the error and allow my character always collect the gem?
  

  What is the execution engine, the collect function?  If she is involved in some form of treatment EnterFrame, it could be a case where you always try to remove green after it has already been deleted.  Try to put something in just before this line to see what the status of the Green is before you delete it.

• Installation of WIN 7 update 12/11/2014 destroyed Dsktop layout and remove all icons from the taskbar except one - major update error

  I just installed 22 updates, the previous update is maybe a week... and when the machine rebooted WIN 7, all my icons to the taskbar disappeared, the wallpaper was different and all but some desktop shortcuts have been removed. It is a disaster.

  Sounds like your user profile has become corrupted:

  Corrupt user profile:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• Animate - Exception of edge "an error has occurred. "Please save your work and restart edge animate.

  . 0.322.27519 version 3.0(Windows 7 x 64)

  

  When I try to duplicate or copy/paste any what div or something simple as text box, image, etc. With any project (big or small).

  Why? heeeelp!

  How can I clear my preferences? Regedit maybe? with 2014.0, the same thing happens.

  Edit: Oh, mean you the workspace, Yes now! window menu,-->--> Reset Workspace and perfect, thank you!