Excerpt from lag

Similar Questions

• excerpt from the previous version of create

  Hello!

  Is there a way to create and save a snippet of the block diagram for an earlier version? I realized that even if I save my VI for the previous version and open, the excerpt from png created by this version sooner is always LV 2014 version.

  Is it possible somehow?

  Thanks for the info!

  It should not conflict with those, but there was a bug in VIPM which caused the CTC to enter in conflict with itself in certain circumstances. You can read about it in the CTC support thread starting here. According to the changelog, the latest on the LAVA (3.2.3) should solve this. If you got all of the network tools, it's probably not the updated, so you should get the lava. If this isn't the case, I've also posted a temporary for the support wire, in order to get that one.

• Excerpts from continuous data acquisition

  Hello

  I want to make an acquisition of continuous data with a NEITHER-6133 @ 1ms per channel. The data must be stored on hard disk. At the same time, I want to take excerpts from acquisition to calculate different values. The acquisition of the extract must be triggert by an external digital trigger.  Are there examples, which combine continuous data collection and collection excerpts?

  Thank you very much.

  Best regards

  Michael

  System

  Windows 7

  LabVIEW 2012

  NOR-6133

  Thanks to the support of NOR-Germany, I found a solution for me:

  1.) continuous trigger switch

  Connect 2) the trigger for the signal to a digital i/o

  3.) synchronize AI and DIO

  Excerpt 4.) the samples needed by the search within the digital waveform pattern

  Result:

  The example shows 4 IA channels Cup (tested on Win7, NI PCI-6115, 4 channels each 5. MECH / s) and calculation on extracts from each channel signal triggered parts.

  

• Excerpts from a list or a block of text using

  Is this possible in 2015 of HR? Don't seem to be able to operate without the extract indicated below my list or paragraph

  for example

  1 step

  2 step

  excerpt from the code snippet

  3 step

  OR

  This is my introduction new fancy, but I can't put a clip in the middle of those words.

  excerpt excerpt excerpt

  What I want is to be part of step 2 or fall in the sentence that I have the extract. I saw old issues from years ago, that's not possible... hope that is not always the case.

  Thank you

  Nick

  Code snippets are blocks and can not be defined inline in a paragraph. (Although you can add it to a list item or a table cell.)

  In your case, you probably want to use the user-defined Variable. They are for shorter content, and you can add in a sentence running.

• I've set up a website in Muse. Any excerpt from fine to preview in a browser. When I download the file to make it live I am getting this error some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the

  I've set up a website in Muse. Any excerpt from fine to preview in a browser. When I download the file to make it live I am getting this error some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author. Art seems to be fine and the host site says it's probably coding error. What should I do?

  Hello

  Have you tried a few steps in the following article

  "Some files on the server may be missing or incorrect" Warning Message

  See if that helps. Let me know if you have any question.

• Excerpt from forcing to check the point/single looking for archive_log 5 - days years

  Hey guys, I'm having some strange problem and cannot figure out what is the issue. I believe that theoretically I tracked down but can't prove it.
  
  Here is what is happening, I have an excerpt from process running for a specific schema, now, this diagram is inserted in every 4-5 days. CDC is able to transfer data and runs correctly.
  
  Here's the question, when I stop the cdc (finishing or maintenance) and restart it lets say 20-30 minutes more late it error.
  The error message says its looking for a newspaper archive, the odd part is his looking for a newspaper archive that is aged 4 to 5 days. We keep only 1 day drive at about 2-3 days in RMAN. (and up to 6 months on tape)
  
  I can't understand why the extraction process would a newspaper of archiving aged 5 days? The only explanation that I have is because this scheme is only written too (specifically inserted) every 4-5 days since the last time the extraction process in fact obtained data from a newspaper of archiving (or redo-log) were about 4-5 days ago, and somewhere in the table control station is this info. Now, if this is the case and I am on the right track, what can I do? Do I need to have somehow the extraction process "checkpoint"(ne sais pas sinon comment décrire) every day? ".
  If my theory is wrong, any ideas of what might be the cause?

  What do you mean by "fix" it?

  OGG still provides ongoing transactions.

  So with these commands before you can see the oldest open transactions.

  with the showtrans command you can see what's open... (so always run that you stop before)... If you do this you can avoid stopping in the middle of a transaction.
  Now, if you mention... it does not solve it... (and could not)

  You can decide to rolllback this transaction... :) (of course you should talk to your people of app to see what are the consequences of this)

  Here's a test case for you:

  Insert into Table A

  Go home

  Tomorrow make the order trans show.
  You should see the open transaction and that extracted OGG is looking for archiving from today newspapers.

• Excerpt from ClickToGoToWebPage does not

  Hello

  I'm having a problem with the excerpt from ClickToGoToWebPage because it works while I'm in a preview mode, but once I have publish my file, nothing happens when I click on the button.  I tried to created a simple file to test the problem.  I chose actionscript 3.0 with flash player 11.4.  I wrote a text and then converted to a symbol with the name of the instance as: test.  I joined the go to Web page snippet with the name of the appropriate forum and it works perfectly in the preview, but not when published as a HTML file.

  I'm working on a recently purchased flash cs6 and doubt that an update would help (which I don't know how to do).  the version is 12.0.2.529.  I use windows 8.

  Here's what's in my layer actions:

  Stop()

  test.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage);

  function fl_ClickToGoToWebPage(event:MouseEvent):void

  {

  navigateToURL (new URLRequest ("http://www.adobe.com"), '_blank');

  }

  on an unrelated note, why can't I just write some text and then put the web address in the text box 'Link' in the text options?  I tried this, but it does not work as well.  What is the function of 'Link '?

  If someone has seen, it would be appreciated.

  Thank you

  You probably have a problem of security sandbox with your link and navigateToURL.

  Download your files on a web server and the test, or add some flash to your list of trusted files, http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l

• Excerpts from contour

  Hi all
  
  An excerpt from a corrupted database plan will be used to rebuild a new application and the new database.
  
  Entries will be very useful.
  
  Concerning
  Prom.

  If this is the outline you're after you can could easily just create a new database and copy the existing schema, or open the outline and save as on the new database.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• copy excerpts from DW MX to DW8

  Can you tell me how to copy my excerpts from DW MX to DW8?
  
  Thank you!

  You are probably looking in the wrong folder. Do NOT look into the program
  Hierarchy of files...

  Find the folder-

  C:\Documents and Settings\\Application Data\Macromedia\Dreamweaver
  MX\Configuration

  (these files are normally hidden - you may have to use Explorer > tools >)
  To view the Folder Options)

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "SisAndi" wrote in message
  News:f1sksi$24G$1@forums. Macromedia.com...
  > When I look in the folder "snippets" in DW MX record I'm looking for
  > with
  > My snippets isn't here. I created a folder named 'andi', and when I'm in
  > DW
  > MX glancing my excerpts of the foldr comes alphabetically between
  > 'accessible' and 'comments '. However, when I find the snippets folder
  > help
  > Windows Explorer, there is no folder "andi" appear anywhere. Any
  > ideas?
  >

• An excerpt from the sqroo-up memory

  Let's see if that messages without profanity (although Apple's music forums are full of the f-word...)

  

  An hour or there (that's how long it took me to get these forums to work under OS 10.4.11) I opened a 13 MB PDF in preview, did a search for a particular word... and everything froze. Could not kill an excerpt, couldn't leave the other apps, the Finder can not pass for a minute. Then I got the pop up "your startup disk is almost full.

  

  Indeed, the boot disk WAS full - getinfo showed ZERO MEGS AVAILABLE. It is seriously messed up. Can someone tell me what happened? And, who wrote an app (preview) that would do something like that? This is beyond sick.

  

  Fill my boot drive (there was about 1 GB free before that) included writing thousands of files, of which many were stored on a temporary 300 MB RAMdisk. Why... ? BECAUSE I DIDN'T DEVELOP THOUSANDS OF SMALL FILES ON A PHYSICAL HARD DRIVE!  Use of the RAM (in Activity Monitor) went from 302 MB to about 4 MB, and a free space on my boot drive went from 900 MB 0 MB. It is ZERO. That's why Preview himself used somehow 600 MB.

  

  At this point I * could * have answered my own question - opening a small PDF in preview and search for the letter 'e' has seized about 30 MB (5813 occurrences of 'e'). Incredible, but it is conceivable that in a PDF 10 times this size, it might have caught 300 MB or maybe 600... ??  If this is the cause, which is the pathetic MacOS Preview application in which she begins searching as soon as you start typing, problem solved. Type faster, or well cut and paste your search term (how sick is it to have to do that?). Because if you are a slow typist, or start typing right now hurt, it's going to start looking for an own f * kin' letter, e.g. 'e' instead of the word "elephant".

  

  But found again shouldn't take more than 600 MB and I am not convinced that was the cause. Has anyone else had this problem (I guess)?

  

  

  Mac OS X, like all modern operating systems, has a virtual memory system that uses space on the startup disk.  The amount of storage space used for this virtual machine "pagefile" depends on whether the system is.

  1 GB of free space on your startup disk is MUCH too low.  You must have at least 10% free space (or more).  In addition, as the available free space goes down lower and lower, which is always available free space becomes more fragmented.  This can severely affect performance because the system tries to write to its VM file spread (into small pieces) all over your hard drive media.  It can even speed up hard drive failure.

  Thus, it is unlikely that the Preview (the application) used up to 600 MB of disk space by opening a PDF file.  The overall operating system was what she does and allocated more space for virtual memory, according to the needs.  When you start up the Mac, the amount originally used by the virtual memory is low.  But it can reach several GBs in size that you use your Mac for different tasks.  If your Mac has low physical RAM, still more disk space gets used by virtual memory.

  You need to free more space on your startup disk, to allow the BONE function effectively.  Get an external drive, to unload rarely used files.

• Cannot create an excerpt from the DVD - unspecified error. What can I do?

  Trying to create a DVD from windows DVD creation.  When I try to listen to excerpts, video the error screen appears: unspecified error.  What should I do?

  Hello

  ·         Were there any changes made to your computer until the problem occurred?

  ·         What version of Windows is installed on your computer?

  Reference: http://windows.microsoft.com/en-US/windows7/help/which-version-of-the-windows-operating-system-am-i-running

  I suggest you to follow a few troubleshooting steps and check if that help in the issue of the attachment on your computer.

  Method 1:

  Try to change Windows DVD Maker DVD-Video settings and check.
  Reference: http://windows.microsoft.com/en-US/windows7/Change-Windows-DVD-Maker-DVD-Video-settings

  Method 2:

  Check if the audio and video filters are causing this issue.
  Reference: http://windows.microsoft.com/en-US/windows7/Video-filters-in-Windows-DVD-Maker-frequently-asked-questions

  Also, please take a look at the article.
  Solve problems with creating a DVD-video using Windows DVD creation
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Method 3:

  Clean boot your computer performance.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to set the computer to start as Normal mentioned in step 7 in the above article.

  Method 4:

  Try to perform a SFC scan on your computer and check to see if that fixes the problem on your computer.

  Click on the link below and follow the instructions in the article.

  http://support.Microsoft.com/kb/929833

  Use / scannow command from the command prompt.

  Note:

  ·         You must be logged on as administrator to run sfc.

  ·         /scannow: Scans all protected system files immediately.

  ·         If sfc detects that a protected file has been replaced, it retrieves the correct version of the file from the %systemroot%\system32\dllcache folder, and then replaces the incorrect file.

  If the %systemroot%\system32\dllcache folder is corrupt or unusable, use sfc/scannowto repair the contents of the Dllcache directory.

  Provide us additional information, as appropriate. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• Cannot find excerpts from IE in Dreamweaver CM³

  I am going through the tutorials in Dreamweaver CC line. There are often differences between my UI and what is stated in the tutorial, which so far has not been a problem. However, towards the end of the Tutorial 4, it shows the procedure to add a snippet of code in comments file in the Panel code fragments called "Less than or equal to IE 7 conditional comment." My list of extracted files seems very different from what's in the tutorial, and I can't find this excerpt

  How can I find this and other extracts that I don't see in my files extracted?

  -Stuart

  

• Excerpt from the hours between two dates

  Hello

  This is the value stored in the table of my database.

  I want to extract betwwen hours two dates. How can I extract it.

  I try to run like this

  Select to_timestamp('27-JAN-14 05.30.00.000000 PM')-to_timestamp('26-JAN-13 08.20.00.000000 PM') double, but it gives the answer as the format 21:10:00.000000000 + 000000365

  I want simple hours, minutes, and seconds

  What is the format of this value as "dd-MON-yy."

  27 JANUARY 14 01.30.00.000000 PM

  26 JANUARY 14 06.22.32.170033 PM

  Use the Extract function. Like this.

  () AS T1 (C1)

  Select to_timestamp('27-JAN-14 05.30.00.000000 PM')-to_timestamp('26-JAN-13 08.20.00.000000 PM') of double)

  SELECT EXTRACT (DAY OF C1) | ' DAYS '.

  EXTRACT (HOUR OF C1) | ' HOURS '.

  EXTRACT (MINUTE OF C1) | ' MINUTES '.

  EXTRACT (SECOND C1) | ' SECONDS

  FROM T1;

  OUTPUT:

  365 DAYS 21 HOURS 10 MINUTES 0 SECONDS

  If not try it.

  SELECT EXTRACT (DAY OF to_timestamp('27-JAN-14 05.30.00.000000 PM')-to_timestamp('26-JAN-13 08.20.00.000000 PM')) | ' DAYS '.

  EXTRACT (HOUR FROM to_timestamp('27-JAN-14 05.30.00.000000 PM')-to_timestamp('26-JAN-13 08.20.00.000000 PM')) | ' HOURS '.

  EXTRACT (to_timestamp('27-JAN-14 05.30.00.000000 PM')-to_timestamp('26-JAN-13 08.20.00.000000 PM') MINUTE) | ' MINUTES '.

  EXCERPT ((SECOND from to_timestamp('27-JAN-14 05.30.00.000000 PM')-to_timestamp('26-JAN-13 08.20.00.000000 PM')) |) ' SECONDS

  DOUBLE;

  Post edited by: Parth272025

• Include any presentation and excerpts from separate chapter?

  Let me state ahead once again that I am quite new to this. In my first draft, I wanted to include a "scène Sélection" menu with video animation of buttons, but I did not see how to connect the buttons to each chapter using just a long clip as a feature film. So, I created separate clips of each chapter and related to those. That worked very well. I read another thread here where the guy said that it always includes his feature cut by chapter, so I've linked to each chapter in the next chapter and the last chapter of back to the main menu. It works well, but there is a long lag between an end of chapter, and the next departure. He's not really playing smooth as a long movie.

  So my long-term question is, you all include a presentation of the feature video and clips from separate chapter if you want to use the video in a scene selection menu? It's like including the film twice, a waste of space, is not? How you guys would connect a video button to a chapter in a video feature when it is all a clip?

  Now, I normally edit with a workflow a little different and have each of the sequences (in PrPro) as a timeline of separate rather than as a long timeline with markers of chapter, but for your purpose, I would like a link buttons in the selection Menu of scenes, to the various chapters. So, for your Play All, just do a chapter Playlist and set the order, if necessary, for this.

  In my case, I bind my scene for each scenario selection buttons and then make a Playlist (not a Playlist of chapter, but similar) for my Play all.

  In regards to your animated buttons, I think that you can choose the good chapter marker and then select the thumbnail of movement to properties each button > Motion Panel. Maybe I'm wrong, but then I do not use chapter markers who often, so is NOT the best source of info on them.

  Good luck

  Hunt

• How good my trigger & Create Sequence are written review my excerpt from PL/SQL

  I have a CustomerHistory table.
  
  Here's a sequence I created for the table:
  

  CREATE SEQUENCE customerhistory_id_seq
  START WITH 90
  INCREMENT BY 10
  MAXVALUE 90000
  NOCYCLE
  NOCACHE;

  I created a trigger example the primary key of the history table:
  
  

  CREATE OR REPLACE TRIGGER cushistory_bef_insert
  BEFORE INSERT ON CustomerHistory
  FOR EACH ROW
  BEGIN
        SELECT customerhistory_id_seq.NEXTVAL INTO :NEW.CustomerHistoryID
        FROM DUAL;
  END;
  /

  After each update, or delete, insert the old record in the history table:
  

  CREATE OR REPLACE TRIGGER cushistory_aft_upddel
  AFTER UPDATE OR DELETE ON CUSTOMER
  FOR EACH ROW
  BEGIN
        IF UPDATING THEN
              INSERT INTO CustomerHistory
                       *
              (
                   SELECT
                           :OLD.c.customerID,
                           :OLD.c.firstname,
                         :OLD.c.lastname,
                         :OLD.c.email,
                           .
                           .
                           .
                           :OLD.mr.roomtype,
                           .
                           .
                           .
                           :OLD.b.checkout,
                           'UPDATE',
                           SYSDATE
                 FROM Customer c JOIN CustomerFamilyMember cf ON c.customerID = cf.customerID
                       JOIN Phone p ON c.customerID = p.customerID
                       JOIN ThirdParty t ON c.thirdpartyid = t.thirdpartyID
                       JOIN BookedRoom b ON c.customerID = b.CustomerID
                       JOIN MotelRoom mr ON b.roomID = mr.roomID
                       JOIN Motel m ON mr.motelID = m.motelID
            );
       
        ELSIF DELETING THEN
        
              INSERT INTO CustomerHistory
                       *
              (
                   SELECT
                           :OLD.c.customerID,
                           :OLD.c.firstname,
                         :OLD.c.lastname,
                         :OLD.c.email,
                           .
                           .
                           .
                           :OLD.mr.roomtype,
                           .
                           .
                           .
                           :OLD.b.checkout,
                           'DELETE',
                           SYSDATE
                 FROM Customer c JOIN CustomerFamilyMember cf ON c.customerID = cf.customerID
                       JOIN Phone p ON c.customerID = p.customerID
                       JOIN ThirdParty t ON c.thirdpartyid = t.thirdpartyID
                       JOIN BookedRoom b ON c.customerID = b.CustomerID
                       JOIN MotelRoom mr ON b.roomID = mr.roomID
                       JOIN Motel m ON mr.motelID = m.motelID
            );
       
        END IF;
  END;
  /

  1 are structured correctly 3 pl/sql code snippets?
  2. in the last example, which is an alternative using the JOIN? If know join 5 tables is not a good
  long term solution. Any idea?

  Hello

  Here are the bugs I find in your code.
  Please view the description of test table and features for more information.

  1 cushistory_aft_upddel is a level trigger line on client.
  Querying the table inside the trigger would give the error table mutation.

  ERROR at line 1:
  ORA-04091: table XXXXX.CUSTOMER is mutating, trigger/function may not see it
  ORA-06512: at "XXXXX.TEST_TRG", line 2
  ORA-04088: error during execution of trigger 'XXXXX.TEST_TRG'
  

  The only way you can acccess them using: old.col_name and: new.col_name.

  2 table the customer is the only updated and so the new and the old mke sense only for the customer table. the old.b.col_name and old. XXX.col_name for all other tables mean nothing and will result in error;

  Here is an excerpt of small test with tahe customer table and another table called check_in. You can extend the same thing for your problem.

  sql> create table customer(
    2    cust_id number,
    3    cust_name varchar2(20));
  
  Table created.
  
  sql> create table check_in(
    2    cust_id number,
    3    check_in date,
    4    check_out date
    5  );
  
  Table created.
  
  sql> create table cust_history(
    2    cust_id number,
    3    cust_name varchar2(20),
    4    check_in  date,
    5    check_out date);
  
  sql> insert into customer values (100, 'Rajesh');
  
  1 row created.
  
  sql> insert into customer values (200, 'kumar');
  
  1 row created.
  
  sql> insert into check_in values (100, sysdate-2, null);
  
  1 row created.
  
  sql> insert into check_in values (200, sysdate-3, null);
  
  1 row created.
  
  sql> commit;
  
  Commit complete.
  
   create or replace trigger test_trg
   after update on customer for each row
   begin
     insert into cust_history
     select :old.cust_id,
            :old.cust_name,
            ci.check_in,
            ci.check_out
       from check_in ci
       where ci.cust_id = :old.cust_id;
   end;
   /
  
  sql> select * from customer;
  
     CUST_ID CUST_NAME
  ---------- --------------------
         100 Rajesh
         200 kumar
  
  sql> select * from check_in;
  
     CUST_ID CHECK_IN  CHECK_OUT
  ---------- --------- ---------
         100 25-DEC-09
         200 24-DEC-09
  
  sql> select * from cust_history;
  
  no rows selected
  
  sql> update customer set cust_name = 'Rajesh2' where cust_id = 100;
  
  1 row updated.
  
  sql> commit;
  
  Commit complete.
  
  sql> select * from customer;
  
     CUST_ID CUST_NAME
  ---------- --------------------
         100 Rajesh2
         200 kumar
  
  sql> select * from cust_history;
  
     CUST_ID CUST_NAME            CHECK_IN  CHECK_OUT
  ---------- -------------------- --------- ---------
         100 Rajesh               25-DEC-09
  

  You can use the other tables to select as I used the check_in above. You don't need to access the customer table that you have values in the: old. and: new. variables for them.

  Thank you
  Rajesh.

  Published by: Rajesh Chamarthi on December 26, 2009 21:30 added example.