Exclude results by using the WHERE statement in the query

Similar Questions

• Retrieve and display a result set using the dynamic sql?

  Hi all
  
  How would display a result set in Oracle using the dynamic SQL? Reason being, the table where I'd retrieve and display the result set is a GLOBAL TEMP TABLE created in a stored procedure. If I try to use the loop as usual, the compiler complains that the table does not exist. This makes sense because the compiler does not recognize the table because it is created dynamically. Here is an example:
  
  create or replace PROCEDURE maketemptab IS
  sql_stmt VARCHAR2 (500);
  OutputString VARCHAR2 (50);
  
  BEGIN
  -create temporary table
  sql_stmt: = ' CREATE of TABLE TEMPORARY GLOBAL globtemptab (id NUMBER, col1 VARCHAR2 (50))';
  EXECUTE IMMEDIATE sql_stmt;
  dbms_output.put_line ('... created table ');
  
  -Insert a row into the temporary table
  sql_stmt: = "INSERT INTO globtemptab values (1, 'some data of a test')';"
  EXECUTE IMMEDIATE sql_stmt;
  dbms_output.put_line ('... inserted row ');
  
  -Insert a row into the temporary table
  sql_stmt: = ' INSERT INTO globtemptab values (2, "some more test data");
  EXECUTE IMMEDIATE sql_stmt;
  dbms_output.put_line ('... inserted row ');
  
  -Select the row on temporary table
  sql_stmt: = 'SELECT col1 FROM globtemptab WHERE id = 1';
  EXECUTE IMMEDIATE sql_stmt INTO outputstring;
  dbms_output.put_line ('... selected line: ' | outputstring);
  
  -drop temporary table
  sql_stmt: = 'DROP TABLE globtemptab;
  EXECUTE IMMEDIATE sql_stmt;
  dbms_output.put_line ('... moved table ');
  
  -display the result set
  for tabdata loop (select col1 from globtemptab)
  dbms_output.put_line ('... test of recovered data are' | tabdata.col1)
  end loop;
  end;
  
  
  In short, how to rewrite the SQL below the comment "to display the result set" using the dynamic sql?
  
  Thank you
  Amedeo.

  Hello

  Try this:

  CREATE OR REPLACE PROCEDURE maketemptab IS
     sql_stmt     VARCHAR2(500);
     outputstring VARCHAR2(50);
     v_cursor     SYS_REFCURSOR;
     v_col1       VARCHAR2(30);
  BEGIN
     -- create temp table
     sql_stmt := 'CREATE GLOBAL TEMPORARY TABLE globtemptab(id NUMBER, col1 VARCHAR2(50))';
     EXECUTE IMMEDIATE sql_stmt;
     dbms_output.put_line('...table created');
  
     -- insert row into temp table
     sql_stmt := 'INSERT INTO globtemptab values (1, ''some test data'')';
     EXECUTE IMMEDIATE sql_stmt;
     dbms_output.put_line('...row inserted');
  
     -- insert row into temp table
     sql_stmt := 'INSERT INTO globtemptab values (2, ''some more test data'')';
     EXECUTE IMMEDIATE sql_stmt;
     dbms_output.put_line('...row inserted');
  
     -- select row from temp table
     sql_stmt := 'SELECT col1 FROM globtemptab WHERE id=1';
     EXECUTE IMMEDIATE sql_stmt
        INTO outputstring;
     dbms_output.put_line('...row selected: ' || outputstring);
  
     OPEN v_cursor FOR 'SELECT col1 FROM globtemptab';
  
     LOOP
        FETCH v_cursor
           INTO v_col1;
        EXIT WHEN v_cursor%NOTFOUND;
        dbms_output.put_line('...test data retrieved is' || v_col1);
     END LOOP;
     CLOSE v_cursor;
  
     -- drop temp table
     sql_stmt := 'DROP TABLE globtemptab';
     EXECUTE IMMEDIATE sql_stmt;
     dbms_output.put_line('...table dropped');
  END;
  /
  

  Kind regards

• the search for empty cells by using the query designer

  Hello

  I'm trying to exclude empty cells in a field (by using the Query Builder), and I did:

  xDocumentSource < match > "CDL".

  < AND >

  < NOT > (xRelatedMsgid < match > "" "")

  but it does not work. I tried "NULL", but it does not work either. Could someone tell me how to do it (or where I can find examples of queries).

  Kind regards

  Iwona

  https://blogs.Oracle.com/Kyle/entry/searching_for_null_values_ucm

• Problem in the export using the QUERY functionality

  Problem in the export using the QUERY functionality
  
  
  I'm trying to export some rows in a table using the query functionality
  and I have some errors... I'm using the syntax is
  
  system@orcl QUERY = scott.emp expdp: '"WHERE emp_no = 123455" '
  DIRECTORY = data_pump_dir DUMPFILE = data_pump.dmp
  LOGFILE = data_pump_12345.log INDEX = n
  
  Can someone tell me please the problem with that statement
  
  I also tried to use the simple export
  
  exp file system@orcl = orcl_export.dmp log = orcl_export.log
  tables = Scott.EMP index = QUERY = n------"WHERE emp_no\ = 123455\"
  
  and this error
  
  EXP-00008: ORACLE error 904
  ORA-00904: identify invalid
  
  My os is Solaris
  Please let me know what the problem

  Hello

  Try to create parfile and use that, otherwise, you will need to escape each clause correctly to run exp or expdp successfully.

  test.par

  tables=emp
  query="WHERE emp_no=123455"
  
  or
  tables=myobjects
  query="WHERE owner='SYS'"
  
  $> exp username/password parfile=test.par
  
  Export: Release 10.2.0.1.0 - Production on Thu Mar 19 10:17:48 2009
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
  With the Partitioning, OLAP and Data Mining Scoring Engine options
  Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
  
  About to export specified tables via Conventional Path ...
  . . exporting table                      MYOBJECTS      22650 rows exported
  Export terminated successfully without warnings.
  

  Concerning

  Published by: OrionNet on March 19, 2009 10:21

• Inserting data by using the query

  Hello

  In a book, I read the Sub statement:

  Inserting data by using the query (DML)

  If the user wants to transfer data from a table to another table in the insert statement are used independently of data that can be processed or not processed form.

  Can someone clarify what is the significance of this (processed or unprocessed form).

  
  

  Thank you.

  Why don't you ask the author of the book.

  How can we know what the author means when you take a quote out of context and don't provide any reference so that we can see exactly what is shown to you.

  I can only imagine that they are referring to data that are queried directly, "like what", another table, or who was interrogated and manipulated before be inserted.

• Using the QUERY parameter in exp/expdp

  Hi, I've faced a nite last question.
  IM currently using Oracle 10 g (10.2.0.4) OS - MS Windows Server 2003
  
  I want a dump of tables to export multiple schemas. say (acb.m1, pqr.b2, xyz.b1)
  
  Each table has a minimum lines of 2,000,000,
  
  And I want to just the initials 10 rows in each table of export
  
  Is it possible that I can do this...
  
  Please answer.
  Thanks in advance

  Export tables in multiple schemas is not supported in Data Pump until 11.1.0.7. So if you're on 10g, you will need to run multiple commands expdp. For only 10 lines of each table, use the query parameter

  Query = "where rownum"<>

  This will apply to all the tables you export.

  I hope this helps.

  Dean

  Published by: Dean WINS January 30, 2012 08:42

• DataPump import by using the query

  Hello
  
  I need to import data by filtering using the query. can anyone help?
  
  Thank you

  Hello
  example of

  expdp HR/hr = emp QUERY:'"WHERE dept_id > 10 AND sal > 10000"' NOLOGFILE = y DIRECTORY = dpump_dir1 DUMPFILE = exp1.dmp

  Impdp HR/hr DIRECTORY = dpump_dir1 DUMPFILE = expfull.dmp QUERY = departments:'WHERE department_id «»< 120"'="" nologfile="">

  See this link

  http://download.Oracle.com/docs/CD/B13789_01/server.101/b10825/dp_import.htm

• IMPDP | Possible using the query option

  HI PPL,
  
  I wanted to know if IMPDP is possible by using the query option, as I took full expdp dump of the mentioned table and want to import only select lines.
  
  Impdp arup/arup directory = demo_dir dumpfile = employees.dmp
  Query = employees:------"" where salary\ > 10000\ order of salary "tables used ="
  
  version: 10 gr 2
  platform: UNIX
  
  concerning

  Obviously, it will be slow if you are using the query option, because IMPDP must import only the data that meets the criteria; It of why we export only limited data (one or two tables as needed) and import them completely.

  Concerning
  Girish Sharma

• List of virtual machines in TIME using the query service

  Someone been able to use the query service to produce a range of virtual machines in a paralytic? I don't see all the attributes on the VclQueryadminVMField that reference the vApp.

  I log in the org of system.

  Any help would be appreciated.

  Name of the action: getVAppVms

  Entry: VAPP (vCloud:VApp)

  Output: Array / vCloud:VM

  Script:

  var vcdHost = vApp.getHost();
  var vms = new Array();
  
  var queryService = vcdHost.getQueryService();
  expression = new VclExpression(VclQueryVMField.CONTAINER, vApp.getReference().href, VclExpressionType.EQUALS);
  filter = new VclFilter(expression);
  params = new VclQueryParams();
  params.setFilter(filter);
  
  var resultSet = queryService.queryRecords(VclQueryRecordType.VM, params);
  while (resultSet != null) {
      var records = resultSet.getRecords(new VclQueryResultVMRecord());
      System.log(records.length + " VM records found");
      for each (var record in records) {
       var vmRef = new VclReference();
       vmRef.href = record.href;
       vmRef.name = record.name;
       vmRef.type = record.type;
       vms.push(vcdHost.getEntityByReference(VclEntityType.VM, vmRef));
      }
      resultSet = resultSet.getNextPage();
  }
  
  return vms;
  

  This is what made our team (more precisely - Christophe)

• Not able to change the password by using the query. Select APPS.fnd_web_sec

  Not able to change the password by using the query.
  Select APPS.fnd_web_sec.change_password ('username', 'password') 'RES' double;
  
  Can someone tell why and what privileges and subsidies have flexibility to the user non-apps while it can change the password using fnd_web_sec.change_password.
  
  
  
  Concerning

  the information above does not solve my problem, I get the message

  Because you do not have permission on all objects that are referenced by the API (see below).

  Select FND_WEB_SEC. CHANGE_PASSWORD ('MARSHAD', 'mohammad @123') "RES" of the double

  *

  ERROR on line 1:

  ORA-00942: table or view does not exist

  ORA-06512: at the 'APPS '. FND_CORE_LOG', line 25

  ORA-06512: at the 'APPS '. FND_CORE_LOG', line 432

  ORA-06512: at the 'APPS '. FND_PROFILE', line 110

  ORA-06512: at the 'APPS '. FND_SSO_MANAGER", line 227

  ORA-06512: at the 'APPS '. FND_WEB_SEC', line 1425

  ORA-06512: at line 1...

  can you please list me what are the grants and other Jules Destrooper I should give to a user so that he can change password.

  I don't have the list of objects and you should get yourself by consulting the site code and eTRM API.

  by changing the DDT in the user non-apps after the grant, will, it may be able to change the password.please tell this syntax is correct or not.
  Select applications. FND_WEB_SEC. CHANGE_PASSWORD ('user', 'pwd') "RES" of the double

  What is the point of using 'FND_WEB_SEC. CHANGE_PASSWORD' and not FNDCPASS or FND_USER_PKG API?

  Thank you
  Hussein

• Use the query results in subsequent query

  Is it possible to use a value is returned in the query number one in the number two of the query that the "where?" For example, the box number is returned in the query number one, and I want to ask again for additional information according to the number of the box.

  Found this... works great http://www.adobe.com/livedocs/coldfusion/5.0/Developing_ColdFusion_Applications/queryDB11. htm

• Using the query to get the group by rollup subtotal

  Hello

  Expected output is, for 'chris' each record must have subtotal row because it has different 'no' of the column values.

  For 'John' the subtotal came as planned because she didn't even.

  Could you please correct the query for "chris" below!

   select   
  case when nm is null then 'Total'  
       when no is null then 'Subtotal'  
       else nm  
  end nm,no,emplmt,profund,status,dt,sal,days,intrst,intrs1,intrs2  
  from   
  (  
      with t as     
          (select 'chris' nm , 10 no ,'FT' Emplmt, 'PF' ProFund , 'Reg' Status ,to_Date ('01/22/2014','mm/dd/yyyy') dt , 2456 sal, 10 days , 50 intrst ,55 intrs1 ,60 intrs2 from dual    
          union all    
          select 'chris' nm , 20 no ,'FT' Emplmt, 'PF' ProFund , 'Reg' Status ,to_Date ('01/03/2014','mm/dd/yyyy') dt , 1000 sal, 30 days , 50 intrst ,55 intrs1 ,60 intrs2 from dual    
          union all    
          select 'chris' nm , 30 no ,'FT' Emplmt, 'PF' ProFund , 'NonReg' Status ,to_Date ('01/01/2014','mm/dd/yyyy') dt , 20 sal, -5 days , 1 intrst ,1 intrs1 ,1 intrs2 from dual    
         union all
         select 'john' nm , 11 no ,'PT' Emplmt, 'PF' ProFund , 'Reg' Status ,to_Date ('05/02/2014','mm/dd/yyyy') dt , 1153 sal, 10 days , 50 intrst ,55 intrs1 ,60 intrs2 from dual    
          union all    
          select 'john' nm , 11 no ,'PT' Emplmt, 'PF' ProFund , 'Reg' Status ,to_Date ('05/16/2014','mm/dd/yyyy') dt , 1000 sal, 8 days , 40 intrst ,45 intrs1 ,50 intrs2 from dual    
  
  
         )    
      select nm,no,emplmt,profund,status,dt,sum(sal)sal,sum(days)days,sum(intrst)intrst,sum(intrs1)intrs1,sum(intrs2)intrs2  
      from t  
      GROUP BY ROLLUP (nm,no,emplmt,profund,status,dt)  
      order by nm,no,emplmt,profund,status,dt  
  )  
  where (no is not null and emplmt is not null and profund is not null and status is not null and dt is not null)  
  or (no is null and emplmt is null and profund is null and status is null and dt is null)  
  

  allows us to use grouping sets to produce just the totals you want.

  with t as

  (select "chris" nm1, 10 no1, "Pi" Emplmt, "PF" ProFund "Reg" Status, to_Date (January 22, 2014 "," mm/dd/yyyy") dt, 2456 sal, 10 days, 50 intrst, intrs1 55 intrs2 60 double)

  Union of all the

  Select No, the "chris" nm, 20 'ft' Emplmt, "PF" ProFund "Reg" Status, to_Date (3 January 2014 "," mm/dd/yyyy") dt, intrst 50, intrs1 55, 1000 sal, 30 days, 60 intrs2 of the double

  Union of all the

  Select "chris" nm, 30 no, "Pi" Emplmt, ProFund "PF", "NonReg" State, to_Date (January 1, 2014 "," mm/dd/yyyy") dt, 20 sal,-5 days, 1 intrst, 1 intrs1, 1 intrs2 of the double

  Union of all the

  Select "Jean" nm, 11 no, "PT" Emplmt, "PF" ProFund "Reg" Status, to_Date (May 2, 2014 "," mm/dd/yyyy") dt, 1153 sal, 10 days, 50 intrst, intrs1 55 intrs2 60 double

  Union of all the

  Select "Jean" nm, 11 no, "PT" Emplmt, "PF" ProFund "Reg" Status, to_Date (16 may 2014 "," mm/dd/yyyy") dt, 1000 sal, 8 days, intrst 40, 45 intrs1, 50 intrs2 of the double

  )

  SELECT

  CASE

  WHEN grouping (nm1) = 1

  THEN "Total".

  WHEN grouping (emplmt) = 1

  THEN "Subtotal".

  Of ANOTHER nm1

  END nm,

  CASE

  WHEN grouping (emplmt) = 1

  THEN NULL

  Of ANOTHER no1

  END no emplmt, profund, status, dt, sal SUM (sal), SUM (days) days, SUM (intrst) intrst, SUM (intrs1) intrs1, intrs2 SUM (intrs2)

  T

  GROUP BY Grouping SETS ((), (nm1, no1), (nm1, no1, emplmt, profund, status, dt))

  ORDER BY nm1, no1, emplmt, profund, status, dt

  NM               NO EM PR STATUS DT              SAL       DAYS     INTRST     INTRS1     INTRS2 chris            10 FT PF Reg    22.01.14       2456         10         50         55         60 Subtotal                                        2456         10         50         55         60chris            20 FT PF Reg    03.01.14       1000         30         50         55         60 Subtotal                                        1000         30         50         55         60chris            30 FT PF NonReg 01.01.14         20         -5          1          1          1 Subtotal                                          20         -5          1          1          1john             11 PT PF Reg    02.05.14       1153         10         50         55         60 john             11 PT PF Reg    16.05.14       1000          8         40         45         50Subtotal                                        2153         18         90        100        110 Total                                           5629         53        191        211        231 
  

• How can improve on the slow update using the query / * + NO_XML_DML_REWRITE * /?

  We have an update query recently brought to my attention that turns very slowly on Oracle 11.2.0.1 against a secure XML binary files table using
  
  Update / * + NO_XML_DML_REWRITE * / set object_value = croutreach.action: 1 where actn_id =: 2.
  I am told the majority/close to the majority of the ~ 16 fields are updated. This table has also many predefined virtual columns with index fn based on them.
  
  My first inclination was to this redesign using updatexml Oracle. I was told, the / * + NO_XML_DML_REWRITE * / index would also be required here.
  
  Update / * + NO_XML_DML_REWRITE * /.
  < tble_name > a
  Set a.object_value = updatexml (a.object_value...).
  
  Last year our dba have been mandated by Oracle Support to use this trick, as the update has not been updated off any msgs of error records.
  
  + 1. Hoping to find out if anyone met with this indication in some capacity and what has their experience been? +
  
  Trying to optimizie this update statement, I'll start from scratch is not using the / * + NO_XML_DML_REWRITE * / hint and will take effect in using the updatexml with establishing a xmlindex.
  
  + 2. Hoping to receive suggestions on creating the good xmlindex - find an informal index. If getting a few good performance with the xmlindex; in an attempt to remove some of the use of the virtual column. +
  
  + 3. Any suggestions on living with virtual columns in conjunction with xmlindexes? See the definition of table action and Associates ivirtual columns and indexes. This picture seems more indexed... +.
  

  REATE
    TABLE "CROUTREACH"."ACTION" OF XMLTYPE
    (
      CONSTRAINT "ACTN_ID_PK" PRIMARY KEY ("ACTN_ID") USING INDEX PCTFREE 10
      INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT
      1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1
      FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE
      DEFAULT) TABLESPACE "ACME_DATA" ENABLE
    )
    XMLTYPE STORE AS SECUREFILE BINARY XML
    (
      TABLESPACE "ACME_DATA" ENABLE STORAGE IN ROW CHUNK 8192 CACHE READS LOGGING
      NOCOMPRESS KEEP_DUPLICATES STORAGE(INITIAL 106496 NEXT 1048576 MINEXTENTS 1
      MAXEXTENTS 2147483645 PCTINCREASE 0 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT
      CELL_FLASH_CACHE DEFAULT)
    )
    ALLOW NONSCHEMA ALLOW ANYSCHEMA VIRTUAL COLUMNS
    (
      *"ACTION_DEF_URN"* AS (CAST(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
      'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                 
  /action/srvContextPointer/outreachActionDefInfo/@actionDefUrn                                               
  '
      PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
      16777216,0),50,1,2) AS VARCHAR2(50))),
      *"STAT_DT"* AS (SYS_EXTRACT_UTC(CAST(TO_TIMESTAMP_TZ(SYS_XQ_UPKXML2SQL(
      SYS_XQEXVAL(XMLQUERY(
      'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                              
  /action/@status_dt'
      PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
      16777216,0),50,1,2),'SYYYY-MM-DD"T"HH24:MI:SS.FFTZH:TZM') AS TIMESTAMP
  WITH
    TIME ZONE))),
      *"ACT_DEF_ID"* AS (CAST(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
      'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                              
  /action/srvContextPointer/outreachActionDefInfo/@actionDefId'
      PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
      16777216,0),50,1,2) AS VARCHAR2(20))),
      *"CORRL_ID"* AS (CAST(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
      'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                              
  /action/correlationId'
      PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
      16777216,0),50,1,2) AS VARCHAR2(50))),
      *"STAT_RSN"* AS (CAST(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
      'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                                  
  /action/statusReason'
      PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
      16777216,0),50,1,2) AS VARCHAR2(30))),
      *"ACT_APPNT_DT"* AS (SYS_EXTRACT_UTC(CAST(TO_TIMESTAMP_TZ(SYS_XQ_UPKXML2SQL(
      SYS_XQEXVAL(XMLQUERY(
      'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                  
  /action/actionAppointment/appointment_dt'
      PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
      16777216,0),50,1,2),'SYYYY-MM-DD"T"HH24:MI:SS.FFTZH:TZM') AS TIMESTAMP
  WITH
    TIME ZONE))),
      *"UPDT_DT"* AS (SYS_EXTRACT_UTC(CAST(TO_TIMESTAMP_TZ(SYS_XQ_UPKXML2SQL(
      SYS_XQEXVAL(XMLQUERY(
      'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                              
  /action/@update_dt'
      PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
      16777216,0),50,1,2),'SYYYY-MM-DD"T"HH24:MI:SS.FFTZH:TZM') AS TIMESTAMP
  WITH
    TIME ZONE))),
      *"CRET_DT"* AS (SYS_EXTRACT_UTC(CAST(TO_TIMESTAMP_TZ(SYS_XQ_UPKXML2SQL(
      SYS_XQEXVAL(XMLQUERY(
      'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                              
  /action/@create_dt'
      PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
      16777216,0),50,1,2),'SYYYY-MM-DD"T"HH24:MI:SS.FFTZH:TZM') AS TIMESTAMP
  WITH
    TIME ZONE))),
      *"ACT_SEQ"* AS (CAST(TO_NUMBER(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
      'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                    
  /action/srvContextPointer/outreachActionDefInfo/@sequence'
      PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
      16777216,0),50,1,2)) AS NUMBER(10))),
      *"SERVICE_DEF_URN"* AS (CAST(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
      'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03";                                                          
  /action/srvContextPointer/serviceDefUrn'
      PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
      16777216,0),50,1,2) AS VARCHAR2(100))),
      *"ASSIGN_TEAM_CD"* AS (CAST(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
      'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                  
  /action/assignment/@teamCategoryCode'
      PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
      16777216,0),50,1,2) AS VARCHAR2(50))),
      *"ASSIGN_STAFF_ID"* AS (CAST(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
      'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                  
  /action/assignment/staffProfileId'
      PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
      16777216,0),50,1,2) AS VARCHAR2(50))),
      *"ACTION_TYPE"* AS (CAST(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
      'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                      
  declare namespace xsi="http://www.w3.org/2001/XMLSchema-instance"; (::)                                                      
  local-name-from-QName(QName("http://www.cigna.com/acme/domains/actions/2010/03",/action/@xsi:type))                                                                  
  '
      PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
      16777216,0),50,1,2) AS VARCHAR2(50))),
      *"ACTN_ID"* AS (CAST(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
      'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03";/action/@id'
      PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
      16777216,0),50,1,2) AS VARCHAR2(50))),
      *"STATUS"*AS (CAST(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
      'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03";/action/@status'
      PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
      16777216,0),50,1,2) AS VARCHAR2(20))),
      *"ACME_MBR_ID"* AS (CAST(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
      'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03";/action/acmeMemberId'
      PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
      16777216,0),50,1,2) AS VARCHAR2(50)))
    )
    PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE
    (
      INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0
      FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT
      CELL_FLASH_CACHE DEFAULT
    )
    TABLESPACE "ACME_DATA" ;
  CREATE UNIQUE INDEX *"CROUTREACH"."SYS_C0014547"* ON "CROUTREACH"."ACTION"
    (
      "SYS_NC_OID$"
    )
    PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE
    (
      INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0
      FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT
      CELL_FLASH_CACHE DEFAULT
    )
    TABLESPACE "ACME_DATA" ;
  CREATE UNIQUE INDEX *"CROUTREACH"."SYS_IL0000082156C00003$$"* ON "CROUTREACH".
    "ACTION"
    (
      PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 65536 NEXT 1048576
      MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST
      GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
      TABLESPACE "ACME_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ;
  CREATE UNIQUE INDEX *"CROUTREACH"."ACTN_ID_PK"* ON "CROUTREACH"."ACTION" (
    "ACTN_ID") PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(
    INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0
    FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT
    CELL_FLASH_CACHE DEFAULT) TABLESPACE "ACME_DATA" ;
    CREATE
      INDEX *"CROUTREACH"."ACTION_STAT_RSN_IDX"* ON "CROUTREACH"."ACTION"
      (
        "STAT_RSN"
      )
      PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE
      (
        INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE
        0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT
        CELL_FLASH_CACHE DEFAULT
      )
      TABLESPACE "ACME_DATA" ;
    CREATE
      INDEX *"CROUTREACH"."ACTION_UPDT_DT_IDX"* ON "CROUTREACH"."ACTION"
      (
        "UPDT_DT"
      )
      PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE
      (
        INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE
        0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT
        CELL_FLASH_CACHE DEFAULT
      )
      TABLESPACE "ACME_DATA" ;
    CREATE
      INDEX *"CROUTREACH"."ACTION_CRET_DT_IDX"* ON "CROUTREACH"."ACTION"
      (
        "CRET_DT"
      )
      PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE
      (
        INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE
        0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT
        CELL_FLASH_CACHE DEFAULT
      )
      TABLESPACE "ACME_DATA" ;
    CREATE
      INDEX *"CROUTREACH"."ACTION_STAT_DT_IDX"* ON "CROUTREACH"."ACTION"
      (
        "STAT_DT"
      )
      PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE
      (
        INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE
        0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT
        CELL_FLASH_CACHE DEFAULT
      )
      TABLESPACE "ACME_DATA" ;
    CREATE
      INDEX *"CROUTREACH"."ACTION_MBRID_TYP_STAT_IDX"* ON "CROUTREACH"."ACTION"
      (
        "ACME_MBR_ID",
        "ACTION_TYPE",
        "STATUS"
      )
      PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE
      (
        INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE
        0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT
        CELL_FLASH_CACHE DEFAULT
      )
      TABLESPACE "ACME_DATA" ;
    CREATE
      INDEX *"CROUTREACH"."ACT_ACTDEF_URN_IDX"* ON "CROUTREACH"."ACTION"
      (
        "ACTION_DEF_URN"
      )
      PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE
      (
        INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE
        0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT
        CELL_FLASH_CACHE DEFAULT
      )
      TABLESPACE "ACME_DATA" ;
    CREATE
      INDEX *"CROUTREACH"."ACTION_ACT_DEF_ID_STATUS_IDX"* ON "CROUTREACH"."ACTION"
      (
        "ACT_DEF_ID",
        "STATUS"
      )
      PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE
      (
        INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE
        0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT
        CELL_FLASH_CACHE DEFAULT
      )
      TABLESPACE "ACME_DATA" ;

  Any suggestions much appreciated.
  
  Kind regards
  Richard Blanchard

  Hi Rick,

  Thanks for adding the sample.

  First note: you use namespaces by default, different in the example of XML and the request - this a misspelling due to your mask real names?

  In any case, I see two problems with the UPDATE statement:

  (1) unless it is really part of the id, do not double-cover the value:

  @id="'888a80be-d69f-464d-b3f7-85b6209f918e'"
  

  must be:

  @id="888a80be-d69f-464d-b3f7-85b6209f918e"
  

  or as a variable binding (see below)

  (2) just like other XML features, XMLExists supports the names. You must declare any namespace as you lower to use XQuery in the expression (in this case, the default namespace).

  It works for me:

  SQL> create table action of xmltype
    2  xmltype store as securefile binary xml
    3  ;
  
  Table created.
  
  SQL> insert into action
    2  values (
    3   xmltype('
    4  
   13     abcdefghijklmnop
   14     qrstuvwxyz
   15     
   16        urn:coderunner:Medical:Definition:ServiceService:11111:7
   17        
   18           Access Profile~Why did you access the profile?~Reason for access?
   19        
   20     
   21  ')
   22  );
  
  1 row created.
  
  SQL> commit;
  
  Commit complete.
  
  SQL> UPDATE action
    2  SET object_value =
    3      updatexml( object_value
    4               , '/action/@status'
    5               , 'triggered'
    6               , 'xmlns="http://www.xxxxxx.ddd/mmm/domains/actions/2010/03"' )
    7  WHERE XMLExists( 'declare default element namespace "http://www.xxxxxx.ddd/mmm/domains/actions/2010/03"; (::)
    8                   /action[@id=$action_id]'
    9                   passing object_value
   10                         , 'dfdfdfdfdfddfdfdfdfdfdf' as "action_id"
   11                   )
   12  ;
  
  1 row updated.
  
  SQL> SELECT XMLCast(
    2           XMLQuery('declare default element namespace "http://www.xxxxxx.ddd/mmm/domains/actions/2010/03"; (::)
    3                     /action/@status'
    4                     passing object_value returning content)
    5           as varchar2(30)
    6         ) as status
    7  FROM action
    8  ;
  
  STATUS
  ------------------------------
  triggered
  

• compose the query without using the query designer

  New on this BEEP 10.1.3.4.1 product,
  
  questions
  
  1. is there a way to compose a query without using query builder but still has a way to see the result of the query under the PIF?
  
  2. How is - a to compose a query prompt? I know that I can create parm after you create the data set, but at the stage of all data already call you query prompt as where employee id =? E_ID? or just not where clause
  
  
  Sorry if these questions are too rudimentary, but I did not see that what we have answered according to the user's guide.
  
  Thank you.
  
  
  WAN

  When you select the 'View' link, you should be able to see this option.

• Using the query, subtract two query components

  Hello
  I am a beginner of PL/SQL and have a problem that I couldn't solve:
  
  Table (op_list):
  -Amount - State
  Item1 - 10 - in
  Item2 - 12 - in
  Item3 - 7 - in
  Item1 - 2 - out
  Item2 - 3 - out
  Item1 - 1 - dmg
  Item3 - 3 - out
  Item1 - 2 - out
  Item2 - 5 - out
  Item2 - 2 - in
  Item3 - 1 - exp
  …
  I would like to get the result of the query (subtract the amount of ' out/dmg/exp' from 'in'):
  Article - quantity
  Item1 - 5
  Item2 - 6
  Item3 - 3
  
  I wrote the code that returns the sum of all the incoming and all components of output/dmg/exp, but could not resolve how to subtract part of the querry on the other. Or maybe there is a better way. Also worried what will happen if there is no "out/dmg/exp" just "in".
  
  
  Select item.name, sum (op_list.item_amount)
  of op_list
  inner join point
  On op_list.item = item.item_id
  where op_list.status = 'en '.
  Item.name group
  Union
  Select item.name, sum (op_list.item_amount)
  of op_list
  inner join point
  On op_list.item = item.item_id
  where op_list.status = 'out '.
  or op_list.status = "dmg".
  or op_list.status = "exp".
  Item.name group
  Return:
  Item1 - 10 [10 in.]
  Item1 - 5 [2 + 1 + 2]
  Item2 - 14 [12 + 2]
  Item3 - 7
  Item3 - 4 [3 + 1]
  …
  Thanks in advance

  select item.name, sum((case when op_list.status='in' then 1 when op_list.status in ('out', 'dmg', 'exp') then -1 end)*op_list.item_amount) balance
  from op_list inner join item on op_list.item = item.item_id
  where op_list.status in ('in','out', 'dmg', 'exp')
  group by item.name
  

  It was missing a couple of kwywords...

  Max
  http://oracleitalia.WordPress.com