Excluding the part of a video of chroma keying

Similar Questions

• I have a Sony HDR - HC3 HDV and want to download only the parts of a video

  I have been using a Sony HDR - HC3 Handycam HDV1080i VCR for many years and have been able to download parts of a video on the part of the band whenever I wanted to.  The camera recently died and I replaced it with an exact version that I still had the band to download videos, so I decided to buy a used recorder which manages the same MiniDV tapes.  When I go to download the only now allows me to download the whole band or nothing.  Someone can explain why this is and is anyway to download portions at a time?   I save machines under tension and can pass from one to the other before I had a chance to download them.

  Thank you

  Paul

  Hi Paul,.

  1 is that the question borders on any particular video?

  2. what version of Windows operating system is installed on your computer?

  Refer to the steps in the following article and check if it helps.

  Transfer video to your computer: http://esupport.sony.com/US/perl/support-info.pl?&info_id=64&mdl=HDRHC3

  http://eSupport.Sony.com/us/p/support-info.pl?info_id=1192&MDL=HDRHC3

  http://eSupport.Sony.com/us/p/model-home.pl?MDL=HDRHC3&template_id=1&Region_ID=1&tab=HOWTO#/howtoTab

  Note: If the problem persists, I suggest you to post the same question in the Sony support community and check if it helps.

  http://community.Sony.com/?XID=M:footer:eSupport

  Keep us updated on the status of the issue.

• Select the part of the video image and place it in the video

  Sorry to bother you all and I can't even be sure of what I want to do is first - I have the master collection and one of the reasons why I've finally graduated to Adobe with video creation is a coach showed me the a few years ago how to select the part of my video (in my case (, horse's head) and playing that clip in the corner of the main video at the same time - until the head (for example) is considered a close to the top in the corner and play at the same time. I now cannot locate the trainer and may not work on terminology appropriate to get a reasonable response on the research. When he showed me how do, he simply pointed out the top horses for the horse played and clicked on something in the menu and it was represented at the same time. If anyone can help - even with the terminology of search - I thought it was PIP but I can't seem to get what I want from these tuts. As you can see I'm not ready for the great film, but I'm learning better what I can create. Thanks in advance, Julie

  Julie,

  Place a copy of the clip on a higher video track above the original. Place an effect of cropping on this clip to keep only the part you want to use. Then use Motion/scale/Position to create a PIP effect.

• In Movie Maker, I want to place a photo on a part of a video without stopping the audio from the video.

  It's all in Windows Movie Maker (Windows Vista)

  Example:

  First of all, I want to have a video (with audio),
  change photo (with audio video) and then continue to the same as before (with audio) video

  I have a video with audio.
  I want to put an image instead of the Visual part of the video.
  But in doing so, I want to still the audio from the video to play while the image is on the screen.

  Please help me, I need the answer as soon as possible.

  Hi benlach,

  Welcome on the site of Microsoft Windows Vista Community.  I suggest you try these methods

  Method 1:

  1. drag a copy of the video on the audio / music.

  2. her completely to the left on the track.

  3. right click / Mute the Audio track... now the audio will be separated from the video but still play correctly.

  4. divide the video and to delete an article of the same duration as it turned again.

  Method 2:

  1 divide your video clip on each side of the area where will be the stills.

  2. now... drag the part cut on the audio / music. BTW... If you want to add a second 5 again... Remove 5 seconds of the video clip. (Info below on the separation if you need)

  3. slide your shots yet to the time line and drop them to the location where you have removed the video.

  4. the Audio clip on the audio / music can be dragged to the right or left to adjust its position.

  Info on splitting...

  "Split a Clip in Movie Maker 2.1"

  1. drag the video clip on the timeline.

  2. play the video/audio by clicking on the 'Play' button under the display screen.

  3. you will see the playback indicator (vertical line) to move forward on the scenario.

  4. click on the "Pause" button at the location where you want to cut and type... CTRL + L or click the "Split" button at the bottom of the display screen. (You can also make adjustments by dragging the playback indicator)

  5. as the many coves that you want and delete unwanted items by right click / Delete.

  And... Movie Maker 2.1 shows that all of the other images. To see all the pictures of Movie Maker 2 shows you all-other-frame. While you are editing project, Movie Maker Vista displays each image. It is generally not a problem ignoring middle managers, but sometimes you notice a flickering image in a clip that is a "stray", and you can not see or cut it out. If you apply the Slow - Down - half video effect to a clip in the timeline panel, see you then each image rather than everyone. You can see the frame problem and separate out. Remove the effect of the clamp to return to normal.

  Let me know if that does or does not work. Good luck!

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft Answers Feedback Forum and tell us what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Every time I go to MSN Video he shows videos that I watch, but the part where you watch the video is black and it says it is loading and it is there. I have windows 7

  Every time I go to MSN Video he shows videos that I watch, but the part where you watch the video is black and it says it is loading and it is there.

  I just installed windows 7

  Hello

  ·         What web browser do you use?

  ·         The issue is only with MSN videos?

  Follow these methods and check if that helps.

  Method 1:

  I suggest you install the latest version of Microsoft Silverlight and check if it helps.

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

  Method 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  The video problems with Internet Explorer

  http://support.Microsoft.com/kb/2532294

• Cut out the individual parts in a video

  Why can't cut us the different parts in a video?

  Hi eslamh,

  In order to use two of the same original video clips, just add the clip to your timeline twice - cut the two instances differently, and that should give you what you want.

  Mike

• "How to create the effect" disappears "as the last part of the Coldplay Viva Viva video?

  Check:

  https://youtu.be/dvgZkm1xWPE?t=3m43s

  They disappear with a pretty cool effect, how can I do? I know I have to use Chroma Key (color key) if I want to do the effect on a person. But please help.

  This other issue is not necessary to answer you, but I would if respond you. How to create the effect of water on an image?

  Can I do it with first or I also use After Effects?

  Thanks to you all!

  Hello boys, a guy in another forum told me this question and for you who want to know how to do it, I'll post his reply here.

  ------------------------------------------------------------------------------------

  First, After Effects is your best friend for the effects.

  The main effect is quite easy, really, as shown here:

  https://www.YouTube.com/watch?v=5ClY7f1c7D8

  Basically, look for a tutorial to dissolve particles.

  With regard to water:

  https://www.YouTube.com/watch?v=7DYe4hwmz6c

  ------------------------------------------------------------------------------------

  Thank you.

• The part of the address of the message writing window TB can cause its own adjustable frame in size as in previous versions of TB?

  In older versions of TB the part of the address of the message entry window had its own adjustable chassis. It was useful that you could develop the image to see all addresses at a time and avoid errors of sending emails to the wrong people, especially when you reply to all and to remove some addresses for example answering users in the company, excluding visitors to learn sensitive information.

  In the recent release you can only see three lines of e-mail addresses and use the scroll bar to see the rest of them, but you may miss the addresses during scrolling up/down. He needs more time to verify that the necessary addresses are there and it is not effective at all.

  Can someone restore the setting of the address in the window of writing? Is there a plan to change this in future versions?

  Please note that I use Thunderbird on Windows XP platform

  Yes! Just below the slider bar formatting changes and you can increase the size of the email address area to see more addresses.

  However, I liked the old style better which was more intuitive. Anyway, there is a way to do the job.

  Thank you very much!

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• RDXV59DTKB2: pause VCR or DVD to skip the part of the original HARD disk

  When dubbing from HDD to VCR or HARD drive on a DVD is possible to pause the VCR or DVD to ignore the part of the original recording to HARD drive, for example to remove advertising a TV program?

  Although I've had this unit for over 5 years I did not use the installation of dubbing before and although I have tried I can't achieve this goal.
  S manual is not clear on this point.

  My unit is: -.
  TOSHIBA drive HARD & DVD / video Cassette Recorder
  Model # RDXV59DTKB2
  # 943 B 5709 4B 19 00 series
  Bought on March 17, 2010

  I'd appreciate comments
  Thank you

  It would be technically possible to make a BREAK of the VCR when copying the HARD drive-> VCR rather than trying the same thing for the copy of the HDD-> DVD, because the burning process can be interrupted for my understanding. But as the manual does not list until such a feature in the chapter "dubbing", it won't work, not even for HDD-> VCR.

• What is the part number of motherboard for Satellite L300D-23Z?

  Hello

  I need to know the reference number of the motherboard for my computer.
  I have been damaged the video chip. Would you be kind enough to give me the part number, as I need to buy a new one.

  Thank you

  + The message was edited: assignment has been translated.

  Hello

  All the Toshiba laptop parts can be ordered directly from Toshiba authorized service provider available in your country.
  ASP contact and try to get a.

  But to be honest, the repair can be a costly affair for the new the new motherboard is very expensive part

• Hi all! Is it possible to show the caller with a video ID?

  Hi all

  My problem is that, suppose someone calling me and at the same time I want to see the CALLER ID and video. Please let me know if it is possible or not blackberry, if possible, how can we do?

  Your views will be highly appreciated!

  Thank you very much!

  Mahendra Singh

  Hi Simon,.

  You mean, we show a video as well in a predefined area of the screen and identification of the appellant by remaining part of the screen.

  Thanks a lot again! Simon, you were the first person here on the BB forum, who greeted me!

• How can I put an image on a part of a video in windows movie maker?

  Hello world

  I have Windows 7 and I have both windows and windows movie maker 2.6 direct Director
  What I'm trying to do is to put a still image on a video with audio.
  I do not wish to add audio with the image but they simply on the original clip. An example of this Visual would be local news when they talk about a story and a picture in the corner of the screen.
  Please help me.

  Hello world

  I have Windows 7 and I have both windows and windows movie maker 2.6 direct Director

  What I'm trying to do is to put a still image on a video with audio.

  I do not wish to add audio with the image but they simply on the original clip. An example of this Visual would be local news when they talk about a story and a picture in the corner of the screen.

  Please help me.

  ======================================
  The following information for Movie Maker 2.1 will work for 2.6.

  For the timeline, drag a second copy of the video to Audio / Music
  follow and drag it left or right to align on the Audio track. (This will be
  provide audio function without interruption)

  Then right-click / mute the Audio track.

  Now, you can split the video anywhere you want... CTRL + L... and delete
  a section... then insert a Photo and give it the same length as the
  segment you removed.

  Here's another method:

  Split your video clip on each side of the area where will be the stills.

  Now... drag the part cut on the audio / music. BTW... If you want to
  to add a second 5 again... Remove 5 seconds of the video clip. (info below
  splitting if you need it)

  Drag your fixed shots to the timeline and drop it off at the place where
  you have deleted the video.

  The Audio clip on the audio / music can be dragged to the right or left to
  adjust its position.

  More information about the Division...

  "Split a Clip in MM2.1.

  Drag the audio clip on the timeline.

  Play the video/audio by clicking on the 'Play' button under the display screen.

  You will see the playback indicator (vertical line), advancing through the
  timeline.

  Click on the "Pause" button at the location where you want to cut and type...
  CTRL + L or click the "Split" button at the bottom of the display screen.
  (you can also make adjustments by dragging the playback indicator)

  Make splits as much as you want and remove unwanted in law clips
  Click on / delete.

  The info can help with Live Movie Maker and Movie Maker 2012:

  Can you add the photo to the project, and then drag in
  the space where you did the split?

  Maybe the tutorial posted by Litton_B in the following
  discussion will be useful:

  Windows Movie Maker 2012: How to add photo
  Overlay on video while maintaining Audio
  http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker-AV/Windows-Movie-Maker-2012-how-to-add-picture/66441d47-EAAD-4af5-9D20-3cdbcf60ceec

  Also the discussion by the creators of the film
  Forums can provide a few ideas:

  Slides/Photos on video, but with audio
  http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=254975

• Calculate hours on a timeline, excluding the duplicated time

  RDBMS 11.2.0.3

  Create the table (date startdate, enddate date) work;

  Insert in work values (to_date (December 16, 2015 11:45:30 ',' mm-dd-yyyy hh24:mi:ss'), to_date (16 December 2015 14:30 ',' mm-dd-yyyy hh24:mi:ss')); ))

  insert into the work values (to_date (16 December 2015 12:00:30 ',' mm-dd-yyyy hh24:mi:ss'), to_date (16 December 2015 17:30 ',' mm-dd-yyyy hh24:mi:ss'));))

  insert into the work values (to_date (16 December 2015 22:45:30 ',' mm-dd-yyyy hh24:mi:ss'), to_date (December 17, 2015 01:15:25 ',' dd-mm-yyyy hh24:mi:ss'));))

  insert into the work values (to_date (December 17, 2015 13:45:30 ',' mm-dd-yyyy hh24:mi:ss'), to_date (December 17, 2015 20:30 ',' mm-dd-yyyy hh24:mi:ss'));))

  insert into the work values (to_date (December 17, 2015 19:45:30 ',' mm-dd-yyyy hh24:mi:ss'), to_date (18 December 2015 02:30 ',' mm-dd-yyyy hh24:mi:ss'));))

  
  

  STARTDATE	ENDDATE	TIME_DIFF
  16/12/2015-11:45:30	16/12/2015-14:30	02:44:30
  16/12/2015 12:00:30	16/12/2015-17:30	05:29:30
  16/12/2015-22:45:30	17/12/2015 01:15:25	02:29:55
  17/12/2015-13:45:30	17/12/2015-20:30	06:44:30
  17/12/2015-19:45:30	18/12/2015-02:30	06:44:30

  I calculate the amount of hours spent on the timeline excluding duplicate time.

  The timeline is the range of first STARTDATE ( 16/12/2015-11:45:30) until the last ENDDATE (18/12/2015-02:30) I want to calculate hours excluding duplicated between this interval hours.

  For example.

  First row:

  Of 16/12/2015-11:45:30 up to the 16/12/2015 14:30 I have the diff from 02:44:30

  Second row:

  Of 16/12/2015 12:00:30 until 16/12/2015-17:30 I have the diff of 05:29:30, but the value of start_time (16/12/2015 12:00:30) is duplicated because was already on the range calculated level 1, so I have to remove it.  Then the correct range of second row is of 16/12/2015 14:30 to 17:30 16/12/2015 correct time is 03:00.

  
  

  I need the make and to end computed in time past on vary from first STARTDATE and ENDDATE last, excluding the duplicated times.

  Any help is welcome.

  Hello

  Thanks for posting the CREATE TABLE and INSERT statements; It's very useful!

  Don't forget to post the exact results you want from these data.  For example:

  GRP_STARTDATE GRP_ENDDATE HOURS

  ------------------- ------------------- ------

  16/12/2015 11:45:30 16/12/2015 17:30 5.7417

  2015/12/16 22:45:30 17/12/2015 01:15:25 2.4986

  2015/12/17 13:45:30 12/18/2015 02:30 12.742

  If this is what you want, here's a way to get it:

  WITH got_new_grp AS

  (

  SELECT startdate, enddate

  CASE

  WHEN startdate > MAX (enddate) over (ORDER BY startdate, ROWID

  ROWS BETWEEN UNBOUNDED PRECEDING

  AND 1 PRECEDING

  )

  THEN 1

  END AS new_grp

  Work

  -WHERE--if necessary

  )

  got_grp AS

  (

  SELECT startdate, enddate

  COUNT (new_grp) OVER (ORDER BY startdate) AS grp

  OF got_new_grp

  )

  SELECT MIN (startdate) AS grp_startdate

  MAX (enddate) AS grp_enddate

  24 * (MAX (enddate)

  -MIN (startdate)

  ), Hours

  OF got_grp

  GROUP BY grp

  ORDER BY grp

  ;

  It is, fundamentally, a problem with GROUP BY. We need the difference between the (enddate) MAX and MIN (startdate) in each group of overlapping lines.

  The tricky part is to identify groups of lines that overlap (grp in the above query).  We can identify a new group to the beginning (new_grp) by checking if startdate of a line is greater than all the previous lines enddate (where 'previous' means in order by startdate).  To identify what group each line belongs to, we can count how many groups have already begun.

• How do I Zoom in on a certain part of a video?

  I'm new to first pro CS6 and I need to know how I can zoom in on a certain part of a video, by some I mean zooming the entire video, only part of it. For example if I have a BF4 clip and I want to have the main game running, but at the same time having the amount of ammunition zooms in on the execution in the same frame. How can I do this? Just like on this photo I quickly edited in Photoshop. as you can see, the ammunition is much larger than the rest of the game.

  Main video on the video 1 track.

  A copy of the main video on the video 2 track. Use the application property in the effect controls panel to zoom, apply the effect, crop and adjust, then adjust its location on the main video by using the property of Motion.  Alternatively, you can set its transparency, if you wish.