Select the part of the video image and place it in the video

Similar Questions

• How to register a specific field selected in MS Paint from an image and save it in Windows 7?

  I have an image I want to register a specific domain of and I save t in a new image (an image, is not to be confused with a BOOT image). I thought that the copy of... function in MS Paint XP was very neat, how can I do this in Windows 7?

  Current situation:

  
  

  1. Open an image in MS Paint
  2. Select the area with the tool select
  3. Right-click the selected area
  4. West no copy to... function

  Desired situation:

  1. • Open an image in MS Paint
  2. • Select the area with the tool select
  3. • Right-click the selected area
  4. • Navigate to a desired output folder

  MS Suggestion: Bring back the old copy to... function in MS Windows 7.

  1. open the image into mspaint

  2. Select the area you want to
  3. click on "crop".
  and now, you will see that the specific area you want. Finally, save too ;)

• How to take an extracted image and place it in the original image?

  Hey,.

  First of all, do not know if this is the right forum, but I can't find a bulletin board for NI Vision issues.

  Here's what I do.  To save time in the inspection process, I extracted my original image inspected a subimage.  I used this subimage of threshold to a very low threshold, which is where I get my time saving, but now I need to back under the image in the original image to the same place (just to put them in a viewer and make customers happy).  How can I do?

  Thank you

  Hey,.

  You can use IMAQ ImageToImage:

  

  Andrey.

• Two part question about multicam sync and placement

  Hello.  I am a newbie to FCP, and I have a few questions.

  1. I have two camera angles and I was wondering if I can sync the audio manually (to exactly match the Visual part), because the automatic method using FCP is an a little off.

  2. question 2 - when I read the camera angles in the window, they are placed vertically.  Is there a way I can place them horizontally rather than vertically?  And a camera angle may be greater in size than the other, instead of being 50-50, it can be 70/30, for example?

  Thank you for your help.

  Is there a quick and easy way to do this?  Thank you.

• Clicking on a video clip selects the entire clip, rather than the range.  I did the update and it still happens.  Help!

  Problem * by clicking on a video clip selects the entire clip, instead of cuisiniere.* *.

  I restarted my computer like new.  Lost the iMovie app.  Re downloaded in the App Store.  Now I have a crappy iMovie on the App Store application.  Then I made, I got the updated version and I did.  Always update does not resolve the problem.  I'm sucking in a hole because I need to make new videos for work and I can't.  In addition, I'm too broke to buy Final Cut.  In addition, all apple stores have a waiting list of 5 days before they see you!  Thank you Apple with a 6 bites taken out of it!

  I had a similar problem and it was driving me crazy. I think you press and hold the 'R' key now to select a range, otherwise, it will select the whole clip. I think it's a goal a feature and not a bug? Hope that helps!

• I have a Sony HDR - HC3 HDV and want to download only the parts of a video

  I have been using a Sony HDR - HC3 Handycam HDV1080i VCR for many years and have been able to download parts of a video on the part of the band whenever I wanted to.  The camera recently died and I replaced it with an exact version that I still had the band to download videos, so I decided to buy a used recorder which manages the same MiniDV tapes.  When I go to download the only now allows me to download the whole band or nothing.  Someone can explain why this is and is anyway to download portions at a time?   I save machines under tension and can pass from one to the other before I had a chance to download them.

  Thank you

  Paul

  Hi Paul,.

  1 is that the question borders on any particular video?

  2. what version of Windows operating system is installed on your computer?

  Refer to the steps in the following article and check if it helps.

  Transfer video to your computer: http://esupport.sony.com/US/perl/support-info.pl?&info_id=64&mdl=HDRHC3

  http://eSupport.Sony.com/us/p/support-info.pl?info_id=1192&MDL=HDRHC3

  http://eSupport.Sony.com/us/p/model-home.pl?MDL=HDRHC3&template_id=1&Region_ID=1&tab=HOWTO#/howtoTab

  Note: If the problem persists, I suggest you to post the same question in the Sony support community and check if it helps.

  http://community.Sony.com/?XID=M:footer:eSupport

  Keep us updated on the status of the issue.

• When I make a video call, the image and sound frequently burst

  Original title: I.M video calls

  When I make a video call the image and audio break-up often so that the link falls down and I have to again open the link that can be very frustrating

  Hi geraldmallinder,

  1. What instant messaging program that you are using?

  2. were you able to make video calls before without any problem?

  3. you will remember to do recent changes on the computer before this problem?

  If you use Windows Live messenger, you can consult the following articles and check if that helps:

  Impossible to establish a webcam with Windows Live Messenger conversation

  Free chat: use instant messaging and webcam to stay in touch

  With the help of your LifeCam with Microsoft Live Messenger

  Hope this information is useful.

• How to select the pieces of my image in black and white?

  How to select the pieces of my image in black and white? FOW example letter J or the circle or the two together?

  

  It's actually pretty easy, but I have to assume that you know a few basics in Photoshop

  (1) open your existing image

  

  (2) double click on the layer and the 'layer style' appears. In the mix if area set the sliders so the whites in the image disappears

  

  You will be left with just the black elements in design

  

  (3) duplicate layers

  

  and merge them together

  

  to give a standard layer

  

  (4) ctrl or cmd click on the layer to select and create a layer mask

  

  (5) you now have a mask of the image. Duplicate the layer, click alt or option, click on the layer mask to call

  

  (6) the blacks and the whites are not completely black and white for the use of levels to adapt to the absolutes

  

  (7) now you have to decide what you want to select. In this case, I chose the lettering and simply covered everything else to the top with black. You do this by lasso selection and fill and items when it's delicate brush just the details with a black brush "hard." .

  

  (8) at this stage, you can do what you want you have a layer mask. So you can color the text for example

  

  or place in a background color and apply a layer as Beveling effect

  

  Hope that makes some sense. It is much easier to do than to describe.

• The access key to select the previous and next image

  Hi all

  I did a lot of research, but I can't seem to find an answer to this.  I already know which keys scroll to the previous or next < and > frame but they only scroll; they do not pick.  Is it possible to use the keyboard to select the previous or next image while selecting as well?  What I mean by select is that if, for example, I selected the transform tool and I use a keyboard shortcut to scroll to the next section, I must also click on the image with the mouse before I can turn.  Or, if I have the align Open box, I can use a keyboard shortcut to scroll to the next section without the need to click on this image before I can align.

  I hope that I have explained this clearly.  In any case, I would like to know if there is a way to do it.  Thank you.

  Create a jsfl file that contains:

  var tl = fl.getDocumentDOM () .getTimeline ();

  var selectedFramesA = tl.getSelectedFrames ();

  tl.setSelectedFrames (selectedFramesA + 1 [1], selectedFramesA [selectedFramesA.length - 1] + 1, true);

  and save that as selectNextFrames

  //////////////////////////////////////////////////

  create a 2nd jsfl file containing

  var tl = fl.getDocumentDOM () .getTimeline ();

  var selectedFramesA = tl.getSelectedFrames ();

  tl.setSelectedFrames (selectedFramesA [1-1, selectedFramesA [selectedFramesA.length - 1]-1, true]);

  and save that as selectPreviousFrames

  ///////////////////////////////////////////////////////////////

  Add two jsfl files to folder Commands and then create shortcuts for each in the edit keyboard shortcuts Panel.

  on win 10:

  C:\Users\\AppData\Local\Adobe\------\Configuration\Commands

• Mac OS 10.6.8 - Photoshop CS5.1 after years of perfect use, suddenly I'm unable to select a layer by clicking on the image and select it in the layers palette.  Solve this problem for me and I'll buy you a new car.  With our thanks, David Heidelberge

  Mac OS 10.6.8 - Photoshop CS5.1

  After years of perfect use, suddenly I can't select a layer by clicking on the image and select it in the layers palette.

  Solve this problem for me and I'll buy you a new car.

  With our thanks, David Heidelberger

  Hi David

  Have you checked your settings to automatic selection in the upper left of the workspace?

  

• In photoshop CS5 (bridge) I could select all the images and their size still before turning them into JPEG files. I can't find a way to do it in CC

  In photoshop CS5 (bridge) I could select all the images and their size still before turning them into JPEG files. I can't find a way to do it in CC

  Hi Tanuj.

  I actually understand it. Not the best user friendly system. Where as before (CS5), I just had to go to crop tool and choose the dimensions and the inches now it in the window. Just really complicated for nothing.

  Thanks anyway Tanuj

  Melanie

• How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

  How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

  Hi jodepepevalentin,

  In the print menu, check "scale to fit media" under the Position and size of the device and then check out.

  If you want the area selected for printing, check "Print selected area" under the Position and size and specify the size.

  Kind regards

  Claes

• My nail of the thumb in bridge always have evidence the adjustments I make to RAW files. Now, for the first time they have not. However when I select the images adjusted and open them in CS6 adjustments are there. I restarted the bridge and PS, and I rest

  My nail of the thumb in bridge always have evidence the adjustments I make to RAW files. Now, for the first time they have not. However when I select the images adjusted and open them in CS6 adjustments are there. I restarted bridge and PS, and I restarted the computer (Mac). Still the same problem.

  I thank assani, but it wasn't the answer. The problem was, I finally understood, that the "option for generation of quality and preview thumbnails" wasn't on "high quality" as it usually is. I have no idea how this happened as I never change this option.

  Thanks a lot for your help.

  Mitchel Gray

• How to select a picture, ignore one and many with shift click to choose several without also selecting the image that you have ignored.

  In the grid discovers how to select an image, a jump and select several images following the a l ignored without also selecting the previous image, that you have ignored as well. This is possible in opening

  Probably easier to select all the with shift-click and then deselect (ctrl-click), one that you don't want.

• Part of the erasure. JPG image and achieve transparency?

  Hi-

  What's the trick more simple to do transparent white mirror, so I can place it on the background image?

  Thank you

  

  If you really must do it entirely in Illustrator, you can either 1) hide the image using the Panel transparency; or (2) you can do it with a clipping mask.

  To achieve this by using all the techniques, you will have to trace the contour of the mirror first and then black paint. Then:

  (1) position way to contour of the mirror above the image, make a rectangle that is larger than your image, select both and combine them (Ctrl/Cmd + 8). Then place the traces on the image, and in the Transparrency Panel, choose "Make mask". Don't forget to check the Panel "Clip" and "invert the mask.

  or

  (2) take the contours of the mirror and the rectangle, select them and choose Create a compound path (the mirror area should be gently from the image). From there, select path and image and group them. Then you can select the Group and, in the layers panel fly-out, click Create/cancel clipping mask.

  There you have it. The two techiniques have ups and downs, give it a try.

  Kind regards

  Eduardo Moura