I tried to use windows help for a start/stop problem I had with xp 64. He said using msconfig and uncheck load system services, and then restart. Now the services restart.
I use a laptop Dell Inspiron 1501 with Windows XP 64 installed.
It is only the first step in debugging your problem. If from disabled services make your problem go away, then you must click on the 'Services' tab and allow some of the services at a time and restart until you find the service that is causing your problem.
"How to solve configuration errors by using the System Configuration utility in Windows XP"
<>http://support.Microsoft.com/kb/310560 >
HTH,
JW
Tags: Windows
Similar Questions
-
When I try to open adobe photo shop elements 2.0 message that says: cannot start adobe because volume windows uses for virtual memory doesn't have enough free space, which could lead to stability problems see windows help for information can help you
Hi gregoryandme,
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Uninstall and reinstall the Adobe photo shop program.
Method 2: Perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.
-
I upgraded my 64 new image computer windows 7 Home premium Edition to windows 7 using the upgrade anytime professionoal. I downloaded the fix for quad core to use virtual pc and windows xp mode. When XP is "windows xp for first use mode setting" it loads to 99% and then I get the message "unable to complete Setup. I service request # 1182160056 but the phone lines of microsoft do not work. Any suggestions?
Have its possible that this is a download corrupted Windows XP mode, you tried to download it again and see if it works? Also, make sure that you first install Windows Virtual PC.
Click Start, type: enable or disable windows features
Press enter on your keyboard
Scroll down and make sure that Windows Virtual PC is checked.
Click OK
Restart if prompted.
http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/
-
I have microsoft fix Center, there a {codec crashes fix} I used it and it has disabled the files I need, can someone tell me how reinable these files, help please!
Hi Shawnmehringer,
Thanks for posting in the Microsoft Community.
It would be useful that you can answer these questions to help you further.
1. have you installed Microsoft Fixit Center on your system?
2 are. what codec fix you referring?
3. which files are disabled and you try to activate again?
If the problem is related to Microsoft Fixit center, you can ask your question on the Forums of Microsoft Fixit to get help.
Microsoft Fix it Center Forums
If you need help to resolve any issues related to Windows, please reply and we will be happy to help you.
-
How to install Win XP on PC with intel i3 processoe running win7
HelloI'm working with a legacy system. My programs to work with Windows XP and more excellent only.Now, one day I can not PC with Windows XP we have windows 7 to house high-end system running on the desktop computer intel i3 processor.I am trying to install windows XP Professional. Installation stops with error "0x0000007b".The new PC with SATA HDD and CD ROM, I was told that windows XP Setup has no support for SATA drives, at the same time if I want to install the drivers, that it seems that for the floppy drive. Thus, it is difficult to install the drives.Also when I spoke to Dell Tech support person, he said I can't install Windows XP on the Intel i3 processor. I don't think, but I will this differ from expert.Can someone help?Hi Steve,.
You can follow this link & check if the problem persists:
Error message "STOP 0x0000007B" when you restart your Windows XP-based computer
Reference: Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XPIf the problem persists, please ask your question in the TechNet forums for assistance.
Hope the helps of information.
-
Sorry I added it in the question, sorry about that part!
Hello! I have the CD of Acrobat Pro DC version and then to buy the subscription monthly I couldn't code CD Exchange to work for my MS Surface Pro 4... as obviously cannot use the CD but Staples has sold to me, I opened it: Staples said that they could transfer to my Surface and they canceled the monthly... but no, I'm still paying every month and I have a box of cd $ 500 that I can't use! Help, please! How can I activate this pay redemption code (which does not work? I tried for hours!) and I pay monthly? Help, please!
I see that you have an active subscription to Acrobat Pro DC under your email address.
See this KB doc for help: redemption code help
If your redemption code does not work, I will propose you to return what you already active subscription.
You can install Acrobat Pro DC from this link: download Pro or Standard versions of Acrobat DC, XI or X
Make sure that you use the same Adobe ID, in which you have Acrobat subscription.
Let us know if you need help.
Kind regards
Meenakshi
-
I bought Adobe Acrobat Professional and tried to turn it on for a while. I also had this same program on my old computer. How to disable enable it from this computer so that I can activate it on my new computer?
Hi larrygoynes,
To transfer the license from one pc to another how to proceed is to 'Disable' the license first of the older machine.
To accomplish this, you need to launch Acrobat, go to the 'Help' menu and select 'disable '.
On the new machine, you can install Acrobat and then use the serial number to 'Turn on' the software and it will complete the transfer of license.
You can refer to the KB Doc: Activation & deactivation help
Kind regards
Rave
-
I do my job to the computer on a MAC book PRO. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open the document. My problem is the document does not show the icon, but rather the document is already open. I spoke with 2 Apple. 'Experts' care and can help me. Can someone tell me what to do?
It's a question of how the recipients e-mail programs deal with attachments. Many e-mail programs will open all the files they can handle, including files jpg and PDF, by default, and if the recipient has not changed that there is nothing you can do about it. The only solution is to the compress first, then it will be delivered as an attachment, allowing the recipient to decompress and open it.
-
MSXML 4.0 SP @ a security update (KB927978)
A security update for Microsoft XML Core Services 4.0 Service Pack 2 (KB954430)Update for XML Core Services 4.0 Service Pack 2 (KB973688) MicrisiftHe will not update these files each time that I update and then restart my PC, she just asked me to update again please helpHello
· What status appear in the historical versions?
a. Click Start, in the search box, type in update
b. click on windows Update
c. click view update history
Follow the steps from the link that has steps on how to troubleshoot Windows Update or Microsoft Update when you are repeatedly offered an update: http://support.microsoft.com/kb/910339
-
When I try to install silverlight I get this error message, the function, I am trying to use is on a network resourse which is not available, try the other way? What now?
Hello
It comes to the installation of vista operating system instance
Try the repost in the silverlight link below forums
-
Given that I cannot use the product on two computers, I can disconnect from one of these two computers, for an hour or a day and log on to a computer, "third party" to use photoshop and then log in to the original computer when I'm done? I do a work one or two times a week to another place and I use the computer which is there. I already have Photoshop on my home and work computers, but I would like to sign out of one of these just for the day I'm away from my office and home and then sign in again when I'm done. I do that often.
Hi Ryan,
Yes, you can do it.
As long as creative cloud is active only two computers, it will work.
Once you have finished your work, you can disable the current computer and reconnect to the previous.
-
Windows 8 refreshment stops at 77% and then restarts and displays an error
I can't update my Windows 8 Pro because when I do, it stops at 77% and then restarts and displays an error (there was a problem during the update of your PC)
Hey Sajjad,
I understand that you cannot update your computer Windows 8.
1. did you of recent changes to the computer?
2. Why are you trying to refresh Windows 8?
I suggest you follow the steps mentioned below and check if it helps.Method 1:
I suggest to disable all external devices except the mouse and keyboard and try to refresh.Method 2:
Use the check disk command for all errors on the hard drive.
Warning: We recommend not to interrupt the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. Security, you can back up your data before using check disk drive.
Use the drive control as follows:
a. press the Windows key + X, and then choose command prompt (Admin) on the shortcut menu.
(b) in the search box type 'cmd' and ENTER. Right click and select "Run as Administrator".
c. type at the prompt in the command CHKDSK/p and press ENTER to scan the drive.
d. type CHKDSK C: /F /R and press ENTER to repair corrupt sectors, if there are.NOTE: The root drive must be C: and drive can schedule a task to start the system, if this is the case, press on is to schedule a task, and then restart the computer to run chkdsk.
When chkdsk is finished, boot up to the desktop, and then check.Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost
You can follow the links below for more information.
How to restore, refresh or reset your PC:
http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PCHow to create the installation media for a PC refresh or reset:
http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-mediaRefresh and reset your PC:
http://blogs.msdn.com/b/B8/archive/2012/01/04/refresh-and-reset-your-PC.aspxWarning for update: the applications that came with your PC or you installed on Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. You will find a list of applications on your desktop after you refresh your PC.
Warning for the Reset: all your personal files will be deleted and your settings will be reset. All the apps that the is come with your PC will be reinstalled, but all other applications will be deleted.
Hope the above information helps.
Let us know if you have other questions about Windows in the future. We will be happy to help you.
-
Why my internet stops now and then not all the time trying to upload links to pdf files
I wonder if there is a problem with my computer or if I need to install a program? My internet stops now and then not all the time trying to upload links to pdf files.
Hello
1. what browser do you use?
2. have you done any hardware changes or software on your computer before this problem?
3. you receive an error message when internet no longer works?
4. what exactly you mean by pdf files download links?
If you use Internet Explorer, you can follow this link:
Tips for solving problems when Internet Explorer hangs or stops working
Reference: Cannot display PDFS on the web
Display PDF files in Internet Explorer, AOL | Acrobat 3D, Acrobat Reader 7 7
Hope the helps of information.
-
When I download a wmv on an internet site and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni. I was told that the media player can miss a card.
Hello
1. what operating system is installed on the computer?
2. are you able to play videos other than video .wmv successfully?
3. don't you make changes to the computer before the show?Method 1
I suggest you to check if the hardware acceleration of the display device setting is too high.
a. Click Start, click Run, type desk.cpl and then click OK.b. click on the settings tab and then click Advanced.
c. click the Troubleshooting tab, and then move the hardware acceleration to none.
d. click on apply and then click OK twice.
e. If the problem is resolved after you move the slider hardware acceleration to none, contact the manufacturer of the graphics adapter driver to determine if there is an update that resolves this specific problem.
Method 2
The required codec is missing or damaged. If the problem occurs when you use a .wmv file, download or reinstall the latest version of Windows Media Player. If you use an earlier version of Windows Media Player, upgrade to the current version of Windows Media Player for your operating system.
http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-PlayerIf the problem occurs when you use a different format of video file, for example a .mpeg file or an .avi file, download or reinstall the appropriate third-party codec.
Codecs: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questionsNote: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.
-
I've updated my explore since the MSN site and then restarted it said I was running a version of Windows. I then re installed Vista with my drive of origin as suggested and created that created an old file from windows to save older files and now it will not recognize the key of the product code.
original title: reinstalling vistaFrom you description of the problem you encounter, the scenario where this can happen.
Windows vista was preinstalled by an OEM or by using a Volume license installation. The problem does not occur on retail versions of Windows Vista. For example, the problem will not occur if you bought Windows Vista and installed the operating system on a computer yourself. If this is the case with your system
Solve this problem by referring to the article below.
http://support.Microsoft.com/kb/935791
To activate windows vista manually, you can follow the steps described in the links below.
http://support.Microsoft.com/kb/940315
I hope this helps.
Maybe you are looking for
-
Impossible to update of the free applications
I have updates available on the free apps and also the latest iPhone update - I have an iPhone 6s. But when I try to update takes me to my payment information - card I recorded is an old account, I do not use and is currently in balance no - he said
-
Satellite L650 does support internal fax modem?
have a new satellite l650. can someone tell me if it has an internal fax modem or do I have to buy an external one.I'm in a rural area so that nobody seems to know.
-
Bootcamp with the ISO of Windows 7 problem
Hello IM on macbook pro retina 15 inch mid-2015 (El Capitan 10.11.3) I try to install a 64 bit of windows 7 on my new mac. First of all, I have got only one option. I can only find the ISO file. An I put my file ISO I got an error message: File ISO o
-
HP Pavilion g7-1310us Notebook PC - "no wireless Module supported"
HP Pavilion g7-1310us Notebook PC Running Windows 7 64 bit I installed a new NIC (network card intel 6235an.hmwwb wireless centrino advanced - N 6235 Dual Band Bluetooth) and restarted the computer and get the message 'unsupported wireless module. I
-
Microsoft Updates do not connect to KB2690729. KB2656352. KB260411 KB2657424
Above updates won't load it please could someone help. I get the error message when automatic updates are installed