executable hangs

Similar Questions

• Executable hangs out

  I have an app which crashes when I close the exe file. The app don't exhibit this behavior of the IDE.

  JY

  How do you know that the section of the code is the origin of the crash? Have you removed it and it crashed is no longer. I mean, I agree it looks suspicious, but I was just wondering if you had checked it.

  In addition, you can add an error handling. Add a Simple error on the end handler and follow errors through you call library function nodes. At this point, LabVIEW could raise an error, and you never know.

  Also, just curious, what is your application in this case? What kind of DLL you are calling?

• LabVIEW 2011 compiled the application crash

  I'm writing an application DAQ simple enough to use in a freshman Engineering Lab is written to the USB-6211. Since it will be used at more than one campus, I try to make a compiled application. Demand, such as built in LabVIEW 2011, works very well. The problem is that the compiled executable hangs in the same places without fail. I've included the source VI unmodified and a version with the acquisition of data code disabled and some dialogue inserted to track the progress of the request. Executables for both are also included.

  I use a architecture of producer/consumer-events to manage the three tasks of data acquisition. Consumers loop will fail after one of the three DAQ events are executed. Consumers loop works very well for the exit event. I also returned to LabVIEW 2010 and recompiled, the same failures.

  Any help is greatly appreciated!

  Stuart

  I think that if you close the front panel to start the VI, it will leave the built application.

  Replace the properies "FP.open" with "FP." State"and toggle between 'Hidden' and 'Normal'. That seems to work in my limited testing.

• Why my Macbook Pro hangs for a few seconds every time that I unlock it?

  Hello

  After the update (10.11.2 (15 c 50)), my Macbook Pro hangs for a few seconds every time that I unlock it!

  Even after rebooting, it's always the same problem.

  I have the MacBook Pro (retina, 15 '', Ende 2013)

  Thank you for your answers, I would appreciate all comments regarding this issue.

  Reset the PRAM.  http://support.Apple.com/kb/PH18761

  Reset the SMC. Choose the method for "on Mac Laptops with non-removable battery.

  https://support.Apple.com/en-us/HT201295

  Boot mode safe. http://support.Apple.com/kb/PH18760

  If this does not help, run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it, select "Open" in the dialog box to execute.

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

• Program LabVIEW will hang between 33% and 50% of the time.

  I have a problem with a Labview program, I did. I have two programs that do the same thing. One is as a flat sequence, and the other is in the form of State machine.

  As explained in the link below, I would like to use a microcontroller to perform wiring for automation of a measurement process. A separate current source and volt meter will be used.

  https://forums.NI.com/T5/LabVIEW/sequence-a-good-idea/TD-p/2601333

  I did some simple test programs that I join since then. The problem is when running, that the labview program crashes, but not all the time is to run the program.

  For example: Hall 1.2.vi will correctly work twice with the third time, he is executed, it crashes. If Cancel you and try again, it will run again twice without any problem with the third hanging. It is in the flat sequence format (was in a flat sequence, but merged windows because I thought that was the cause). From what I can tell, the program crashes when calling Keithley 6517 unique Read.vi. Two connected Keithley devices are connected to the computer via GPIB to 16 and 27. The way I checked if it was this vi the cause or contributed to what I deleted the program never hung and it. I find it very strange that it crashes exactly on the third attempt every time.

  Simple.VI Hall 1.3 will work the first time and hang the second time. If it works 50% of the time. It is in the format of State Machine. It hangs in the case entitled "Measurement 1" that contains the Keithley 6517 unique Read.vi.

  I used the running highlight button and watched the program to run. Curiously, it only crashes when you use this button. So I tried to add some delays/waiting in different places without success.

  This could be the cause? As a side note, I say that the program is suspended for two reasons. The principal is the program does not run so the execution arrow is always black. The second thing is that if you notice at the end of the labview program, I have a block he who turns to the power source which does not happen when it crashes. I have to turn it off manually, and then click the abort program button to stop labview.

  
  

• How to freeze the quick sign in command-line executable is runing

  Hello

  I have an executable file, that I compiled in Labview and I run from the line of command (CMD) as part of a sequence of commands.

  The command line may look like this example:

  Order #1

  Order #2

  MyLabviewFile.exe

  Order #3

  Order #4

  ....

  Once the exe starts, it works for about 1 minute.

  The problem is that the command line is not locked while the executable is runing and the following command (No. 3 in the example) is sent before the end of the executable. This can be a problem.

  I have to 'freeze' lock the quick sign while the executable is runing and/or have some sort of indication to the INTERIOR of THE LINE of COMMAND when the executable ends. Or any other way to do the #3 command starts only when the executable ends.

  Does anyone have an idea how to do this?

  Instead of using

  MyLabVIEWFile.exe

  use

  cmd /C MyLabVIEWFile.exe

  This will cause the sequence of order hang until the end MyLabVIEWFile.exe of execution.  If your exe/path has spaces, you will need to put quotes around it as such:

  cmd /C "MyLabVIEWFile.exe."

• print easy text.vi does not work in the executable

  I have 3 computers to target that runs labview 2012 on a PXIe8101controller.  In my statemachine the vi prints a report using simple text, report vi (palletized report generation) at the end of the trial.  Its an executable vi on all 3 machines.  On 2 machines, it works fine.  On the 3rd he hangs up when I'm logged in as a standard user.  If I log in as an administrator, it works very well.  The thing I noticed is that on 2 machines, that it works, the image is "factory...". 1.2.1F6' (under control panel > systems).

  On the test equipment that it only works in admin mode the original image is 1.2.4.f1.  MAX is also 5.3.1 on that past fine and 5.5.0 f1 on the one that does not work on.  Everything I'm mssing?

  Thank you.

  solved...

• Explorer Windows began to hang occasionally after installation of recent updates

  I installed the latest Windows updates two days ago. After that, I observed the strange question. Explorer Windows or any other application that bed the list of logical drives crashes from time to time for 10-15 minutes and does not respond. If I wait until he wakes up, he continues to work normally, but may crash again after some time. Sometimes, it may be in 10-20 minutes after the restart, or even in 1-2 hours after the reboot. The Task Manager shows not overloading CPU or memory for blocking.

  My OS is Vista Home Premium x 64 SP1 computer HP Pavilion DV7 laptop, Intel Core Duo 2 GHz, 4 GB RAM, HARD 2 x 250 GB drive.

  I completed the virus scan, tried to uninstall antivirus and any other software that can theoretically cause hang while reading list of reader, nothing done. Test memory not found error. Also done sfc/scannow. My hardware drivers are installed, Device Manager shows all the hardware without error in factory work. Event log contains no errors. The total number of windows updates installed the same day is about 60, I can provide the full list if necessary.

  Any ideas or suggestions?

  Here is one of the reports on the problems of "problem reports and solution."

  Problem event name: AppHangB1
  Application name: Explorer.EXE
  Application version: 6.0.6001.18164
  Application timestamp: 4907e791
  Hang Signature: fcfa
  Hang Type: 0
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033
  Signing of additional blocking 1: 43d1c0725d401e9d949f8e03773d5125
  Signing of additional blocking 2: 0f5a
  Signing of additional blocking 3: 28fb5509977f05ee6332a67d1bb93ecf
  Signing of additional blocking 4: fcfa
  Signing of additional blocking 5: 43d1c0725d401e9d949f8e03773d5125
  Signing of additional blocking 6: 0f5a
  Signing of additional blocking 7: 28fb5509977f05ee6332a67d1bb93ecf

  The blocking problem is successfully solved by installing Vista SP2 RTM.

  My test program was executed about 20 hours, did not show any delay playback optical drive or anything else.

  Thank you very much for the help.

  BTW, SuperAntiSpyware will not work with SP2, Vista blocks now pilots AntiSpyware as incompatible.

• Hanging Windows desktop and does not, online or off the power. I have to use the task mgr constantly to "shake" the windows to startin

  Original title: Hello I have an xp pro sp3 dell dimension 2400. Hanging of Windows desktop and does not, online and off.

  Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

  I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

  I have xp of the process and have nothing wrong.

  Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

  Any suggestions would be greatly appreciated.

  Thank you! :>)

  Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

  I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

  I have xp of the process and have nothing wrong.

  Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

  Any suggestions would be greatly appreciated.

  Thank you! :>)

  The image (it back up to an external drive as full image) and reinstall Windows XP, update, drivers and everything.  Install any plugins that you NEED to do all that you see here that the bat hurt.  If the problem no longer exists, something has gone wrong with your system from before (corrupt files or your cleaning is not as complete as you think) and if the problem persists - probably something to do with the material. In all cases, you can return to the image if you wish.

  To the extent wherever it is the registry, I must ask, * how * you have come to this conclusion?  Not that I'm defending something - I was wondering what you did to decide who is not your registry database?  (Side: I agree with you.)

  That's what * I * would call cleaning and optimization of a Windows XP machine:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Installation hangs during the installation of Adobe Pdf Reader, MS Doc Viewer free of charge and same VS2010 c# Express

  For the last two months that I had trouble setting things in general, for example MS doc viewer for free and VS2010 c# Express.

  Yesterday, I tried to install the new version of Adobe Pdf Reader and had exactly the same problem again. I double-click on the executable installer, that it goes right up to 100% on the preparation and when it gets to the point when it should start the installation itself that the computer just hangs and installation does not.

  I'm almost certain that this is not a virus I have an up-to-date antivirus and run a scan complete of all the two days. He has never had any problems there.

  Anyone know what goes wrong? How do I put right?

  Help, please.

  Here's how to solve problems with Windows Installer: http://www.ehow.com/how_4813669_fix-vista-problems-windows-installer.html.

  If this does not work, try the Windows Installer Cleanup utility: http://www.softpedia.com/progDownload/Windows-Installer-CleanUp-Utility-Download-18442.html and see if that helps.

  Try to reinstall Windows Installer: http://www.microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en.

  I hope this helps.  If this is not the case, the issue may not be with the installer, but another problem, and we need to solve problems to try to find the problem.  Post back if this does not work and we will try other options.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 pro 64 hangs up on the installer is updated to display registry settings

  Windows 7 pro 64 hangs up on the installer is updated to display registry settings.  It will sit there for hours and doing nothing. Hard drive seems to click from time to time.  New drive in a new i7 system.

  If the problem persists, try to start safe mode, start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards

  Right-click your video card, click on uninstall.

  Restart your system

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards
  Right-click your video card

  Driver update software; then click search automatically for updated driver.

  Note: The drivers on the Windows Update site is directly provided by equipment manufacturers. Microsoft tests drivers in various environments prior to publication; However, we cannot guarantee that all the drivers work on all hardware platforms as there are too many different models, although their hardware IDS are the same as the standard version. In some cases, due to changes in the material by different manufacturers, updates of the driver can cause an error.

  If this does not work on your question, I suggest you install the Vista driver in compatibility mode. Remove and rescan the device in the device, right click on the executable/installer file manager driver-> properties and select the Compatibility tab. Click on the box to check run this program in compatibility mode for option and select Windows Vista from the drop-down list. then try to install the device driver using run as administrator.
  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Unable to play zoo tycoon 2, error: executable has stopped working

  Original title: executable of tycoon 2 zoo does not

  I recently installed Zoo Tycoon 2 on my Windows 7 laptop. It has installed completely, but when I try to run it a message pops up saying: Zoo Tycoon 2 executable has stopped working. I put the boot parameters to use memory maximum as I've seen in other posts, but its still does not. Is it possible to make it work for Windows 7?

  Hello

  The game Zoo Tycoon: complete Collection is not compatible with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=Zoo%20Tycoon%3A%20Complete%20Collection%20

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (a) right click on the program

  (b) click on Properties

  (c) click on the compatibility tab

  (d) select run this program in compatibility modeand select Windows Vista or what to use the system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  See also:

  Game hangs or quits unexpectedly

  http://support.Microsoft.com/kb/303032

  You can also check the event viewer for the detailed error message

  Let us know if it helps.

• Tycoon Zoo 2 executable has stopped working, please help!

  Basically I just got ultimate collection of zoo tycoon 2 and the installation of the part went well but when I tried to play the game of the color scheme changed on windows 7, then this message popped up.
  "executable of zoo tycoon 2 has stopped working" I tried loads, we're talking about compatibility and I tried but I don't understand how it works, please, please help!

  Hello

  Method 1: If the program is not compatible, then try to install and run the program in compatibility mode.
  Use the following steps:
  Right-click on the program
  Click on properties
  Click on the Compatibility tab
  Select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Method 2: I would say allows you to clean start, then download and install the update from the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 of section of boot KB929135 to the computer in normal mode.

  See also:
  Game hangs or quits unexpectedly
  http://support.Microsoft.com/kb/303032

  You can also check the event viewer for the detailed error message.

  Hope this information helps.

• Executable of Zoo Tycoon 2 has stopped working

  Hello

  I have installed and run my Zoo tycoon 2: Ultimate Collection on my laptop Windows 7 successfully and it has now stopped working. When I try to load the game it changes the color scheme to windows 7 basic and then a little black box arrives, he has a messagethen of error appears saying: Zoo Tycoon 2 executable has stopped working and it closes the program. I tried changing the settings in "run programs made for previous versions of windows" but when he checked the mobile Zoo Tycoon 2: Ultimate Collection is not listed. My laptop meets the minimum requirements of the system and tried to download a patch, but it hangs just at the end of the installation. Any ideas?

  Hello

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  To set up the computer in a clean boot, follow the steps in the link: How to perform a clean boot

  http://support.Microsoft.com/kb/929135

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Method 2:

  I also suggest you to see link and check.

  Game hangs or quits unexpectedly

  http://support.Microsoft.com/kb/303032

  Microsoft Games: Error "game has encountered a problem and needs to close."

  http://support.Microsoft.com/kb/300963/en-us

• Daily hangs after upgrade to Windows 8

  Hey there,

  So since I update of Windows 8 (new facility) my computer hangs regularly while executing tasks, such as browsing the web, etc.
  A BSOD is not, on the contrary, the screen becomes blue light but with thousands of lines of the artifact.
  It looks like this (not my picture):
  http://CDN.overclock.NET/d/D8/900x900px-LL-d8a94907_IMG_1059.JPEG

  I think it's a GPU driver problem, but I tried the different driver version and it still happens. I have a lot of discharge etc. reports that were sent to Microsoft, but who knows if that does nothing. Any ideas on how to mitigate the problem?

  Thank you!

  simple little program could give you an idea of what is causing that..,.

  http://www.resplendence.com/WhoCrashed