Execution of a rule of company without having to open a form

Similar Questions

• How to run the form directly without having to open the form designer

  Hello Expert:
  
  Normally I run Oracle Form designer and print button.
  
  is there anyway that I can run it directly from IE without going into the Forms Designer.
  
  or I fom.fmx and compile the form already, is anyway to make it work directly without having to open the form designer.
  
  or even when to call form.fmx or compile the form from asp.net
  
  I use the Oracle 10 g Forms Designer.
  
  Thanks in advance.
  
  Published by: user11403781 on February 4, 2011 13:14

  You can run a form directly from a browser, assuming that the HTTP listener is running. In the case of Developer Suite, this would be OC4J. So, follow these steps:

  1 locate and open this file: ORACLE_HOME\install\portlist.ini

  2. take note of the value for ' * Oracle Developer Suite HTTP port. " It will probably be something like 8888 and 8889 or 8890 or something similar.

  3. start OC4J using the shortcut created during installation. It will be labeled something like "Start an OC4J Instance". This will open a DOS window. Do not close IT. Leave this session BACK will end the listener.

  4 once OC4J has initialized (you will see "... initialized" in the DOS window) open a browser and enter the following (replace you with host name and port requested in step 2 and form):

  http://YourHostname:port/forms/frmservlet?form=C:\myForms\helloworld.FMX

  If you are not able to get OC4J to initialize and remain running, attempts to run a form will fail. Also, if your machine is not registered DNS you can have problems using the host name in the URL. Instead use 'localhost' or '127.0.0.1 '. For example:

  http://127.0.0.1:8889/forms/frmservlet?form=test.FMX

• Hi, whenever I hit the home button on the current page go to my home page AND also opens another tab - I just want to go to my home page without having to open another tab that I then have to close. Any ideas?

  I was just in Firefox 4. Now, whenever I hit the home the current page button goes to my homepage (which is what I want), BUT it also opens another tab - I just want to go to my home page without having to open another tab that I then have to close. Any ideas?

  Gotcha. Go to your desired homepage and close all the tabs you want to NOT open when you click the home button. Then, you have several ways to update the home page setting as described in the article.

• How can I join an existing email, I have forwarded to my address to another email address, I want to send him without having to open the attachments

  I am trying to send a copy of an email to another email address. As I had deleted the email I forwarded your new to my e-mail and now I want to sent to another email address.  It has attachments with it and when I try to pass it on to the new address can not send it without having to open the attachments and I have to send it without doing it would be someone has any ideas please?

  You don't mention your e-mail program, but you probably have an option to forward as an attachment. Who will show new text until they open the attachment. Send it to yourself to test.

• Is it possible to easily view the status of the approval process for a specific campaigns without having to open it?

  Hello

  Is it possible to easily view the status of the approval process for a specific campaign without having to open it?

  Thank you

  Hello

  Yes. Campaigns launch area, select open an existing campaign.

  Thank you

  edynamic expert Eloqua

• What code to navigate to page without having to open a new page?

  Hello, I have a flash button embedded in a css/HTML page that I want to use to navigate to a new page without having to open a new window. Here is the code I use in the SWF file that I got the adobe tv tutorial:

  http://TV.Adobe.com/watch/ADC-presents/buttons-and-interactivity-in-Flash-CS4

  Here is the test page that I joined the flash button: http://ianmartinphotography.com/testers/index-Flash.html

  The 'flash' button is the button "about Ian" at the top left. I want to like traditional bearings navigation on the page. (I'm working my way until the button built-in flash melted in place, that's why I use flash.)

  // 1. Event handler function

  function clickHandler (Event: MouseEvent): void
  {
  trace ("Click!");
  navigateToURL (new URLRequest ("http://ianmartinphotography.com/about.html"));
  }
  // 2. Assign the listener
  about_btn.addEventListener (MouseEvent.CLICK, clickHandler);

  I just want to go to another page, not to open a new window. How can I change this code to do this? Thank you!

  -Ian

  If you are looking for navigate ToURL function in the help documents, it lists all the window options available.  For your case, you can use:

  navigateToURL (new URLRequest ("http://ianmartinphotography.com/about.html"), "_self");

• How to remove a Mail plugin without having to open the mail

  I use a particular mail plugin that has been very helpful so far upward. However this plugin has just been updated so that the Mail does not open and I get the error message refers to a problem with the HockeySDK I see that has just installed this plugin. I am waiting to hear the developer about it, but in the meantime I can't use the Mail on my Mac. Because I can not open the Mail I can't delete the whole plugin in the normal way. Is there another way I can remove this plugin in the meantime, until this problem is solved?

  Hello, RobbieSnr!

  Thank you for using communities of support from Apple!  I see you are having some problems with third party plug-ins that you use with your Mail from Mac app.  I know how it is important to be able to use your communication by e-mail, I'd be happy to help you to get this working again!

  Because I don't know anything about this point the plug-in you use, it is difficult for me to tell you how to uninstall.  I had an idea to get your e-mail application to open, however!  First of all, make sure that you have completely left the Mail (no point below on the platform) app.  Then, hold down the SHIFT key on your keyboard and then as you are now, click on the Mail app icon to open it.  Now keep Shift during the charge of the Mail application.  The app needs to stay open for you, then you can remove your plug-in in the usual way you mentioned.

  You can find more information on this feature in the section called "when you open and exit an application" in this paper: automatically re - open windows, applications and documents on your Mac

  Have a great weekend!

• How can I access the page tabs in the current window, without having to open a new tab?

  I like the new tab page. I would like to open it in the current window, without the need to open a new tab or window.
  Is this possible?

  You can make a bookmark and set the location to about: newtab to open this page in the current tab.

• How to open a bookmark in a new tab without having to open a new tab first?

  Is there a way to directly open bookmarks in a new tab without first opening a tab, then opening the bookmark?

  Middle-click (press the mouse wheel), CTRL + left click, right click (and choose "Open in a new tab") will open a link or bookmark in a new tab.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox

• Is it possible to start Firefox without having to open any page, not even a blank page?

  Just curious. Is possible to start Firefox 4.0.1 without opening any page, not even a blank page?

  No, you can hide the tab, if there is only one tab open, but it's not good to do.

  Perhaps if you explain why you don't want a blank tab, maybe we could have a nicer-sounding answer, if the answer is still no.

  What I don't like in Firefox 4, which is a blank tab ("" subject: vacuum "") presents itself as 'New tab' which is incorrect, once you do another thing the former title on the tab before 4.0 was more correct and it was in parens so he showed better as "(sans titre) ' on the close tabs and is correct, because it has no title."

• Change a word or acronym in each file in a folder without having to open each file separately.

  Is it possible to change a JSST to BBST in every file in a folder without physically open all files in the folder and do a find & replace?  Under MVS, Unix, BACK 3.0 and CP/M I was able and/or may.  I have at least 6 files with between 20 and 100 files that contain an acronym that needs to be replaced.  I haven't the time to do it manually for each file.

  Hello

  I'm afraid to forget that Windows 7 does not provide a feature that allows you to replace a word in a closed file.

  You can use a search engine of your choice to find a third-party application that provides you with the functionality.

  Third warning:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• When I open my pictures folder I can't image, what I see is a generic file name... Y at - it an option that I can use if I can see my photos without having to open it? __

  There is none

  When I go to the images and select views and select Extra Large icons, I can see the images above the file name.  Frankly, I don't know how to avoid having the picture show, even though I never wanted that.  He has no control, I know to show representations of just generic file or show pictures showing images being the default value.  Maybe something is happening with your system.  If this does not work, after return and we will try to solve the problem.

  Good luck! ICCC Lorien - One - MCSE/MCSA/network + / A +.

• I can view thumbnails of my photos in my documents without having to open the picture its self how to fix this?

  Problem:

  • folder my documents will show images
  • No miniature icon pictures so you can see what the photo is
  • recently sent mobile back fixed hard drive and this problem occurred.
  • I tried clicking on display to change the size of thumbnails, but without success

  
  

  Problem:

  • My documents
  • No miniature icon photos
  • recently sent the laptop back to have fixed hard drive
  • By clicking on display to change the size of thumbnails

  
  

  =========================================
  Here's a possibility... go to... Start ORB / Control Panel.
  Folder options / tab / files and folders / uncheck
  "Show icons never thumbnails" / apply / OK. John Inzer - MS - MVP - digital media experience

• Send email without having to open e-mail client? (needs work)

  Hi, I create a contact form join us I need info from shoot and send several emails; However, I do not want the e-mail client to open new message in a message. I want just the info sent to the email specified.

  Here is the code that I currently have:

  var cMyMsg = this.getField('Name').valueAsString + " has a " + this.getField('Category').valueAsString + " that is " + 
  this.getField('Severity').valueAsString + ". " + "Description of " + this.getField('Category').valueAsString + ": " + this.getField('Description').valueAsString; 
  
   app.mailMsg({  bUI: true,   
   cTo: "[email protected]",  
   cSubject: this.getField('Category').valueAsString + " regarding PA Coversheets",  
   cMsg: cMyMsg } );
  

  I currently have a field of text set up for Email_Address. I need to shape when submit is clicked to send emails to this address for e-mail I specify in the code without going through the mail client open.

  Help, please. Thank you.

  I like a mouse, an event that runs a javascript script. I changed the BUI to false. and that did the trick. Thank you.

• After the upgrade to 38.2, how can I see the messages without having to open each in a new tab? CAUSE: obsolete conversations module

  I just upgraded to Thunderbird 38.2.0. Now when I click on messages in folders, the text no longer appears unless I open each message in a new tab, which is excessively cumbersom.

  You have the addon installed Conversations?
  Make sure that she, and all the addons are at the latest level - tools | addons | updates

  Otherwise, please post a screenshot.

  Thanks for posting your results