Execution of ESX under ESX with a HP VSA SAN Guest

Similar Questions

• Call to random society claiming to be under contract with Microsoft.

  I just had a call from emergency PC that says that my computer has been severely compromised.  A technician told that they are under contract with Microsoft to call and correct critical errors.  Someone had a call like this before?  I just ran a scan and it said that there is no virus.  I stopped the call because it seemed fishy to me.

  It's a SCAM! Not to follow their instructions or advice and not to provide ANY information to them. Do not install the software on your computer and if you have done so, begin to cancel your credit cards immediately.

  Because they use the internet lines and/or phone to complete their fraud, there may be federal agencies in your country who are interested in discovering their calls. Their report directly to the appropriate agency if you feel you can contribute to their arrest and the charges.

  Microsoft do NOT pick up the phone and start dialing customers and never phones/e-mails asking for personal information or asking them to visit a web site! Please do not take into account these calls and hang up immediately.

  Avoid scams that use the Microsoft name fraudulently

  On another note, if you have problems with your computer, please do not hesitate to post a description of the situation and the error messages you received in those forums. We would be happy to help you. (information staff unnecessary or requested !)

• DURING THE INSTALLATION OF LIGHTROOM DVD 6;  SHOWN IN LIGHTROOM UNDER OPTIONS WITH A WARNING COLOR YELLOW INDICATING VISTA NOT SUPPORTED.  7 RUNNING

  DURING THE INSTALLATION OF LIGHTROOM DVD 6;  SHOWN IN LIGHTROOM UNDER OPTIONS WITH A WARNING COLOR YELLOW INDICATING VISTA NOT SUPPORTED.

  I'M RUNNING 7 WITH 4 GB OF RAM AND 30 GB OF FREE SPACE

  TOTAL INSTALL 0.0 KB

  GABRIEL

  Please see:

  System requirements for Adobe Lightroom for Mac OS and Windows

  You can try to run the application in compatibility mode:

  Make older programs in this version of Windows - Windows help

  Make the programs more compatible with this version of Windows - Windows help

  I hope this helps.

  Concerning

  Megha Rawat

• I use Adobe Acrobat Pro XI (11.0.08) during execution of "save under" process "Reduced the size of the pdf file" Adobe for awhile then stops completely and needs to close. All started to do that today.

  I use Adobe Acrobat Pro XI (11.0.08) during execution of "save under" process "Reduced the size of the pdf file" Adobe for awhile then stops completely and needs to close. All started to do that today.

  As I had not heard of you, I tried to 'cut' of this folder and pasted into a folder, I called "temptemp" in the same root fodler lacation, (not in the original file). Run the program and it gave me the same error and closed again.  Any help now?

• Please suggest a select query / under query with using any routines or

  source table: three columns ORIGIN, DESTINATION, MILES
  
  Origin Destination Miles
  
  Sydney Melbourne 1000
  Perth, Adelaide 3000
  Canberra Melbounre 700
  Melbourne Sydney 1000
  Brisbane Sydney 1000
  Perth, Darwin 4000
  Sydney, Brisbane 1000
  
  out put: three columns ORIGIN, DESTINATION, MILES
  
  Duplicate routes should be ignored, so the output is
  
  Origin Destination Miles
  
  Sydney Melbourne 1000
  Perth, Adelaide 3000
  Canberra Melbounre 700
  Brisbane Sydney 1000
  Perth, Darwin 4000
  
  Please suggest a select query / under query with using subroutines or functions/pkgs to get put out table.

  Hello

  user9368047 wrote:
  ... Please suggest a select query / under query with using subroutines or functions/pkgs to get put out table.

  Why? If the most effective way to achieve the desired results is to use a function, why would you not use it?

  Here's a way, without all the features:

  SELECT     a.*
  FROM           source_table  a
  LEFT OUTER JOIN      source_table  b  ON   a.origin          = b.destination
                                        AND  a.destination       = b.origin
                        AND  a.miles          = b.miles
  WHERE   b.origin  > a.origin    -- Not b.origin > b.origin
  OR     b.origin  IS NULL
  ;
  

  If you would care to post CREATE TABLE and INSERT statements for your sample data, and then I could test this.

  Published by: Frank Kulash, November 6, 2012 19:39
  Fixed WHERE after MLVrown clause (see below)

• Music and ads are ok. Videos with speaking parts (last tested on the episode of Letterman with Tina Fey as a guest) does not work.

  Hi, I have Windows 7 and the Sound Blaster Recon 3D PCIe audio device. In the last few weeks, I noticed that some videos will play without problem and some have the following problem: the music and ads are ok. Videos with speaking parts (last tested on the episode of Letterman with Tina Fey as a guest) does not work well. Specifically, I hear a noise when they speak. But if I keep place the volume of the speaker (on the icon) and keep clicking the open icon, the sound begins to get stronger and you can actually hear it above his ' ding ding ' by clicking on the icon of the speaker volume. I've never had this happen before. I don't think I did something different from my usual activities lately and haven't downloaded all new program. Music plays without problem. Only the French-speaking parties. I tried the program compatibility troubleshoot and it told me "Incompatible application". Don't know what it means that I am aware of no incompatibility. Never happened before. Just suddenly appeared. Don't know if updates recent MS interfered with the audio device.  Also, I tried looking for questions that are already using the Control Panel, Manager of devices... and no problems were discovered. I put the volume on the strongest settings already and that doesn't work anymore.

  Thanks for your help to solve this problem.

  Just an update.  Problem solved. Faulty speaker connections. Did not touch the connections before the problem, so not sure what happened to these connections, but the problem is resolved. Thank you.

• Upgrade ESX with RDM

  I'm under ESX 3.02, 61618 version and would like to carry up-to-date ESX 3.5.  But I have the RDM attached to it on a few virtual machines running on ESX 3.02 at this time.  Is there something that I need to know before upgrading to ESX 3.5 hosts? RDM is phyiscal... Thank you

  There should be no problem to upgrade with RDM - check out http://www.vmware.com/pdf/vi3_35/esx_3/r35u2/vi3_35_25_u2_upgrade_guide.pdf for more information-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• How to associate cluster esx with the data report store

  Hi all

  I'm running a repore that displays data stores less than 50 free concerts. The storage team would like a coloum for esx clusters associated with the LUN. I can't see to find it and what is possible.

  Thanks in advance,

  Scott.

  I would create a WCF function, script type, with a timeRange parameter and a new data store VMWDatastore context parameter, required, not a list.  Set the output in common: string.

  Add the following script:

  QS = server. QueryService

  Query = "!" "VMWCluster where esxServers.datastores.uniqueId = ' ${datastore.uniqueId}"

  cluster = server. QueryService.queryTopologyObjects (query)

  clusterNames = clusters? collect {cluster-> cluster?. name}?. Join(', ')

  return clusterNames

  You can then use this in your report, feeding the entrance of context for the current row data store.

• Reboot ESX with MSCS Cluster nodes

  Hello

  I have an ESX Cluster that must be restarded. This host cluster to a MSCS Cluster (without recommendations affinity VMWARE DRS...).

  What is the best practice?

  -Keep maintenance mode, as the other VMS running vmotion or,

  -Set the DRS affinity as soon as possible and the node of MSCS Cluster stop when necessary (only comments stop or other actions to do before?) or,

  -Any other idea?

  Thank you

  Should not able to vmotion for DRS wikll MSCS cluster node does not work - strting with the ESX host that has the standby node place it in Maintenance mode and manually knew node MSCS nodes - restart the host ESXi get node maintenance - once it is up and the lcuster MSCS is stable - the main failover node MSCS and shute to the bottom of the virtual machine - place this host ESX to Maintanance mode allowinf DRS to evacuate VMS running - restart the ESX host brings the VM MSCS back up and replace the workload in this node MSCS.

• ESX with "unable to write to the media" streamer for hp ultrium tape

  Hello everyone,

  We have a couple of customers with the same problem.

  They all Esx (3.5 or 4i) with a small business virtual windows 2008.

  The backup software that they use are exec backup Arcserve 15 or Symantec.

  The backup software are fully patched.

  About twice a week the backup failed due to an error "Unable to write to media" (arcserve error: "The code detection unexpected SCSI", "cannot write to media", Backup-exec: "HP 1 reported an error on a request to write data to media").

  The backup device (hp ultrium3), scsi controller and the bands are already replaced

  The backup was working fine before migrating to ESX.

  Does anyone has the same experience or a solution?

  If you have available, I would use passthrough. Windows then has control of the device.

• NAT network between the host ESX with DVS

  Hello.

  In my test of vSphere 4, I have two ESX hosts. I want to share an IP address between all the virtual machines on these two ESX hosts. In this regard, I have a virtual machine that acts as a NAT router. This virtual machine has two network that is connected to each their own vNetwork Distributed Switch connection. We have a physical NIC (on each ESX host) which has the Internet connection. The other has no physical network connection.

  To test if it works I created a VM test on both ESX hosts. The system works on the virtual machine that is on the same ESX host as the virtual machine that acts as a NAT router is located, but not the virtual machine on the other ESX host. The other VM have no contact with the router and receives no DHCP data.

  Any suggestions? I know I did something wrong because DVS is new to me, but I really want this to work.

  Hello

  That ends up being a vNetwork design more than anything even with vDS. For example, if you have a NAT that works for all your hosts you would then have a NAT virtual appliance such as:

  PSwitch external network <->Teddy <->vSwitch <->vPG <->NAT VM <->vPG <->vSwitch <->Teddy <->network internal pSwitch

  Now the vSwitches in the above can be traditional vSwitches or vDS' the key is that the "seconds" vSwitch must be connected on the same vSwitch on all other hosts, so it has an uplink to a physical switch that is also connected to all other hosts. vDS does NOT lighten your vNetwork is the need of cable to allow the communication of the VM.

  The VM NAT can move from host to host as long as there is communication to this virtual machine on each host on each network in this case, the external network and internal.

  Best regards
  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009

  Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere (TM) and Virtual Infrastructure Security' [/ URL]

  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]

  Blogs: url = http://www.virtualizationpractice.comvirtualization practice [/ URL] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://itknowledgeexchange.techtarget.com/virtualization-pro/ TechTarget [url] | URL = http://www.networkworld.com/community/haletky Global network [url]

  Podcast: url = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcastvirtualization security Table round Podcast [url] | Twitter: url = http://www.twitter.com/TexiwillTexiwll [/ URL]

• What is the best way to backup of virtual machines on a standalone ESX with the data store local

  Hello

  I want to save the virtual machines on a host ESX autonomous. and all of these virtual machines is the local data store.  What is the best way to save these virtual machines in this situation?

  And probably we don't provision VTL on the local data center, so it is possible to use VCB to backup? And VCB is a good choice compared to the traditional method that installs the backup client in each virtual machine?   Because I think that in this situation with the data store local, it cannot not reduced the load on ESX hosts and network overhead can be avoided.

  Thank you!

  LAN

  > 1. VCB usable remote tape library? I mean it's not local library and uses the tape library to another network data center.

  VCB is completely unrelated to the tape library, it is a framework, not a backup solution. If your standard backup software can work with the remote tape library you can try it to ungrateful with VCB.

  > 2. what the difference bwteen hot - added NBD and modes if there is that an ESX host with store data local and want to use a virtual machine like VCB proxy? I think that they are the same: the VCB proxy read data through the I/O of the ESX host stack in this situation.

  NBD works on network and the backup traffic goes through the service console connection. Hot add uses special machine for assistance to connect vmdk to and uses of e/s disk stack instead of e/s network.

  > 3. Veeam Backup is free software?

  No, it isn't.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• How can I determine my IP ESX with vMA?

  Hello

  I would like to know what comes my ESX host in the vMA's IP, but I don't see a command esxcfg-vswif in vMA.  Is there another way when it is connected to an ESX host via vMA to get the IP address of vswif0?

  Thanks in advance

  You can get this by using the vSphere API, but it is not available in any script VMware canned because you should not be configured vswif remote interface, especially if you have one.

  But if you want to interview him, here's a script that I wrote just that gets you what you need: getvswif.pl

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Config network initial ESX with iSCSI SAN

  Hi all

  I want to install 2 ESX 3.5 servers which will be connected to an EqualLogic iSCSI SAN.

  The SAN is on a VIRTUAL, 10.x.x.200 with a 255.255.255.224 LAN Gateway.  This VLAN is not routable, DNS servers, etc.

  What I am trying to understand, it's for the initial setup of ESX, when I set the config network (console), should I register the IP address for the VIRTUAL LAN, example was:

  IP address: 10.x.x.201

  Gateway: 255.255.255.224

  Primary DNS: white

  Secondary DNS: white

  Or, for example B, should I use our 'public' speaking:

  IP Adress:129.x.x.201

  Gateway: 255.255.255.0

  Primary DNS:129.x.x.1

  Secondary DNS: 129.x.x.2

  I know that with the VIC, I can later add vSwitches, etc., but at least for the initial installation, I want the configuration to provide smoother operation. Thanks for any idea that you can provide!

  Chad

  Hello and welcome to the forums.

  What I am trying to understand, it's for the initial setup of ESX, when I set the config network (console), should I register the IP address for the VIRTUAL LAN, example was:

  Use example B (129.x.x.x) for the Service Console (management functions), and after that the system is in place to add an another vSwitch used to connect to the SAN VLAN.

  Good luck!

• ESX 4.0 with Dell/EMX CX500 SAN

  Hello

  We have a Dell/EMC CX500 SAN network in our DR site.  Although it is not in the list HCL has anyone had experience of the use of this SAN with ESX 4.0?

  Thank you

  Euan

  I don't expect any problems with the CX500. However I recommend phoning EMC and ask them if they are working on getting certified?

  Duncan

  VMware communities user moderator | VCP | VCDX

  -