Exercise without relying on the watch ring

Similar Questions

• How can I dynamically load swc files using as3? (without relying on the Flash IDE).

  How can I dynamically load swc files using as3? (without relying on the Flash IDE).

  The SWF file can be used in the same way as the CFC, which means that you don't need to "visually show" anything when it is loaded. Your code can use the classes and assets incorporated into the SWF, just as a SWC file. So if someone just to load the SWF file to see what was in it that they see nothing. They could however access programmatically to what anyone on the inside just like you, if they went to that level. But it is not as easy as just racing as SWF to see what is inside.

  I hope that all packaging several separate sovereigns will allow you to load and unload only what you need to keep the RAM usage as low as possible with a minimum load SWF.

  If you are ready, please mark all useful/correct so we can filter without response. You're welcome and good luck!

• Apple Watch - ring exercise not updated

  Hello. Just today, I had problems with my Apple Watch Sport (series 1) watchOS3, which included the workout and the App running activity.

  Today, I went for a Cycle in the open air which I followed him on my Apple Watch (I brought my iPhone with me). I finished training and saved. In total, I had worked for 53 minutes, however, he wasn't to my activity.

  In business, he told me that I've only made 26/30 minutes of exercise, even though at the bottom it says 'Outdoor - 8.67 km Cycle'.

  I called the Apple Support, but he just told me to disable the pairing and re - pair my watch, which did not help. I was told that they were "redevelopment of their tools" and therefore could not diagnose my problem, so they told me to call back tomorrow.

  Why I write here today, it's just to see if someone has had this experience, and if you know how to solve this problem. Any help is appreciated.

  Thank you!

  Hello

  Progress toward your daily goal of exercise of credit, the application of the activity aims to identify the activity equal or exceed the equivalent intensity of a brisk walk. This requirement applies for general daily use and during the recording of training through the app to training sessions.

  Appropriations for the financial year is awarded for each full minute during which this condition is fulfilled. It is possible that not all of your cycling workout meets this requirement.

  The definition of a brisk walk varies from one person to another and depends on your personal information. To verify that this is correct - and update over time:

  • On your iPhone, in the application of the watch, go to: My Watch (tab) > health > edit - tap and adjust the settings, then press on in fact.

  Apple Watch uses different sensors and data sources to track the results of training sessions, depending on the type of activity. For example, with Apple Watch (first generation) and the models of series 1, the watch can access data matched iPhone GPS if it is taken along during the walk outdoors, running and cycling training. (Series 2 has built-in GPS).

  Calibrate your watch can improve the accuracy of the estimates made by the activity and workout app app. More information and instructions for calibration of your watch are available via the link below. The article also includes instructions for resetting the calibration data and leave.

  If you prefer to receive credits of exercise during the duration of your training sessions, regardless of their estimated intensity levels, follow them through the application of the training session using 'Other' as the type of activity. This credit a minute of exercise for each minute of the workout. Active calories will be estimated at a rate equivalent to a brisk walk or based on the data recorded by the heart rate sensor, according to what is higher.

  More information:

  • Calibrate your Apple Watch for better accuracy of training and activity - Apple Support
  • Use the activity on your Apple Watch - Apple Support
  • Use of the workout on your Apple Watch - Apple Support

• I leave Apple Watch mangetic charger without turning on the card?

  Can I leave the Apple Watch mangetic charger without turning on the charger?

  When not to wear my watch, I put my Apple Watch on the stand of the watch...

  

  

  Does magnetic can damage the battery if I let the watch for a long time?

  Hello

  Yes, you can leave your watch on the charger without the power connected. The magnet will not damage the battery.

  If the power is rather left trendy, Apple Watch cannot be overloaded and again, the battery won't suffer wrong after normal use. Load stops automatically when it is fully charged (and restart as / when required due to the use of the current battery). Follow Apple's safety and handling instructions, and note also that:

  -It is not possible to turn the watch off the coast while it is on the charger and connected to the power supply - what is normal.

  -It is also normal to watch, adapter sector and charger become hot when it is connected to the power.

  More information:

  Check your battery and load your Apple Watch - Apple Support

  Keep Apple Watch in acceptable operating temperatures - Apple Support

  https://www.Apple.com/batteries/why-lithium-ion/

• I changed from an iphone 5 S 6 s without disconnecting from my watch, 5s has been cleared and my watch can not be unlocked so that I can't erase it to pair with the 6s. What can I do?

  I changed from an iphone 5 S 6 s without disconnecting from my watch, 5s has been cleared and my watch can not be unlocked so that I can't erase it to pair with the 6s. What can I do?

  This is what Apple said in their Article of support:

  Disable the match without your iPhone

  If you do not have your iPhone, you can always erase content and settings on your Apple Watch. On your Apple Watch, tap Settings > general > reset > erase content and settings. This will reset your Apple Watch to the factory settings.

  See you soon,.

  GB

• Why my dial of the watch is amplified? I can't return to normal size without turning off power.

  Why is my dial sport 38mm enlarged? I can't return to normal size without turning off power. How prevent and repair without turning extinguished/turned on?

  Hello

  Zoom (an accessibility function) has been activated on your watch.

  • To turn off the Zoom:
    • On your iPhone, in the application of the watch, go to: My Watch (tab) > general > accessibility > Zoom - put it off.
    • Or on your watch, go to: homescreen (via a simple press on the digital Crown) > (cog icon) settings > general > accessibility > Zoom - tap and enable / disable.
  • If the accessibility shortcut has been enabled and configured for the Zoom, you can also enable and disable functionality more conveniently:
    • On your watch: quickly press the digital Crown (the round button) three times.
  • To set up accessibility shortcuts:
    • On your iPhone, in the application of the watch, go to: Watch My > general > accessibility > accessibility shortcut (bottom) > select / deselect Zoom.

• My wife and I have iPhone 5 s, the two rings at the same time while we are at home when one of us Gets a call. They are on the same account, is there a way to stop this without establishing separate accounts?

  My wife and I have iPhone 5 s, the two rings at the same time while we are at home when one of us Gets a call. They are on the same account, is there a way to stop this without establishing separate accounts?

  settings - phone - call another device - off.

  One of you should get their own apple ID, you just go to have problems later.

• Icon exercise persists on the dial of the watch

  This morning I used my Apple Watch to follow an elliptical at the gym session, as I have done several times in the past. When it was over, I saved the data and came out as I always have.

  Since then, however, I have noticed what seems to be an icon (a green rider) exercise at the top of the watch face. I can't understand anyway to make disappear. No idea what this means and what to do about it? If I go into the application of the workout, it just show the choice of menus for the type of exercise as it usually does at the start.

  I see the same thing on my watch.  I couldn't understand it either so I just do a soft reset and it goes.  I hope that someone else knows the best way to deal with this issue.

• The simultaneous ringing of two clients MOVI

  Here is the config...

  Address MOVI is the last[email protected] / * / for all users

  The same account and the address is used when you connect to a VCS-control of the office or a VCS-Highway to the House.

  When the user is logged on and using his Office MOVI and usually leaves without disconnection

  The user will then House and newspapers in the VCS-highway.

  When the user is called from inside network... it sounds the MOVI customer who is registered for the VCS - C (inside) and never ring the customer MOVI external home.   If opt out us customer MOVI of the VCS-noninale... it sounds then the external customer MOVI.

  We do NOT have find Me on our VCS and we can consider, however, I do not think that it would give a simultaneous ringing.

  I understand that if we had FindMe... we would need separate addresses for office and home as...

  [email protected] / * /.

  and

  [email protected] / * /.

  The VCS search rules can be written to make true simultaneous ringing for MOVI two clients with the same address?

  Thank you

  Hi Steven,

  I just checked this in the lab, and it seems that research for the Local area and the area on the VCS - C rules should have the same priority in order for two customers to ring at the same time.

  The downside of this (compared to what the rules of search in the defafult for the Local area 50 and 100 for the covered area) is that the VCS - C will send more research to the VCS-E then it normally would (searches for aliases that are observed in the local area on the SCV - C but is not normally on the VCS-E) , but normally this should not be a problem.

  To work around the problem, you could do a search model Movi device URI-specific rule, apply this rule of research in the area of course and set the priority for this search rule identical to that of the local area. If you use [email protected] / * / for your Movi records, would be a corresponding regular expression

  .+\. [email protected] / * /\.com$

  The advantage of having this rule of specific search (and more), you'll see searches less touched your fast track if you were to change the priority of the current rule of the research on zone crossing to match that of the rule of local area search.

  If it's true that your video users tend to use Movi times when, in the office and out of office, without connecting to their customers of Movi in exercise when you leave, you probably want to have the same priority to the local area and the crossing area.

  Normally this should not occur too often, however, as users who employ Movi when in office, normally do on a laptop they bring with them when they leave, removal of the possibility of the customer in-Office Movi still being connected while the user current left.

  Hope this helps,

  Andreas

• Can I use the watch on my right wrist?

  I find myself handed is it possible to use the watch on my right wrist and the button to the left without the screen being backwards?

  Hello

  Watch Apple Watch can be worn on each wrist and with the buttons on each side.

  To change the configuration, on your iPhone, in the application of the watch, go to: My Watch (tab) > General > shows the direction > choose favorite wrist and the side buttons which will be located.

• How to put in the front of the watch during swimming to see heart rate

  Received the Watch 2 day and taken for a swim practice in the pool (of course)

  happly to see enough faithfully has towers and gives average heart rate but only AFTER training

  I wanted to 4000 m (and I fact..) but from the exercise the watch when asked for the total calories to burn.

  QUESTION 1: how to set the distance (rather than calories)? At the start of the year?

  While the dial of the watch training appeared when out of the water and gave the number of laps, total distance, total time of exercise and calories burned.

  QUESTION 2: you can change the information presented during the swim to see heart rate? (Rather than the number of Calories predictable)?

  NOTE

  For swimming training, the watch is a bit disappointing, given that in the swimming training, you normally do a few repetitions as 10 x 100 start each 01:30 or 01:45. I normally use the watch of Garmin swimming to take the time (100 m start button and press again on arrival) of the clock, then briefly shows duration of the tour and afte 4 continuous seconds so you can see when you start again (e.g. to 01:45). I hope that there will be a third-party solution soon for Apple Watch 2, while I don't have to swim with two watches...

  Hello

  1. After selecting the length of the pool, slide laterally on the screen to move to a distance goal, which can be set in meters or yards (firmly press the screen to switch between them).

  2. follow the following steps to customize the information displayed by the application of training during your workouts in the pool swimming:

  • On your iPhone, in the application of the watch, go to: Watch My > training > training view.
  • Choose several metrics.
  • Tap pool swim > press on edit (top-right) > select up to 5 parameters, including heart rate (they can be arranged in your order of preference).
  • When you are finished, tap on Done (top right).

  More information:

  Work with your Apple Watch - Apple Support

• do you need to always have your iPhone with you when you wear the watch?

  do you need to always have your iPhone with you when you wear the watch?

  Answer brief No.. The watch can do many things with the phone. If you have the 2nit series has built in GPS so it can follow, see this.

  How to use your Apple Watch without your iPhone in the vicinity - Apple Support

• iMessages appearing on the watch, but no iPhone

  My watch will be occasionally receive iMessages and appear in the notifications of the watch, but does appear on my iPhone not anyway. Even after reset of these two devices, my phone iMessages will not reflect the texts I have received on my watch. Why this phenomenon occurs and synchronize the two devices so that they reflect the same information? Any help would be greatly appreciated!

  * All products are on the latest iOS (Apple Watch & iPhone 6 sec more). *

  * Watch and iPhone were right next to each other *.

  Hello

  Some other users have reported the same problem (without resolution).

  I suggest that you inform Apple by contacting the Apple Support:

  • Contact - Support official Apple
  • https://Twitter.com/applesupport

  And/or by submitting your comments (all comments are read):

  • https://www.Apple.com/feedback/watch.html

• The watch is not, nor can it sync with reminders.

  I bought at the Apple Watch last week.  I'm back this week.  Why?  The watch is not, nor can it sync with reminders.  For me, this is the reason more and more useful to have the watch.  Without the reminders and the ability to easily sync with other devices, it is not a value of the purchase.  I am disappointed by the lack of foresight of Apple and didn't want to patch the problem with a third-party application.  It will be difficult to come back to me.

  < re-titled by host >

  Hello

  Apple recently announced reminders will be added to Apple Watch as an application integrated in the software to come, watch OS update 3, which is scheduled for release this autumn / fall.

• line in the front of the watch Photos

  A line without aliasing appeared recently on both my stainless steel 42mm watch, as well as on the model of Sport 38 mm of my wife.

  I prepare the photos in Photoshop as 624 x 780 pixels png files. You do not see the vertical line right in the Photos app on my iPhone, but they are present in the Photos that live on my watch.

  The line did not exist before iOS 9.3. I don't know if the most recent iOS introduced the question or not, but it coincides with the line that appears when it did not exist before.

  

  Can I have answered my own question... looking at the guidelines of Human Interface for the  watch, I see that images with a transparent layer should be avoided. This potentially makes smaller images sizes while making the  look more reactive. The crenellated line doesn't appear in transparent png in earlier versions of the watchOS, so I can only assume that the roundups of optimization was instituted at Apple.

  So, now, I know, however, I have to re-record all my images  shows after them flattening. Hope you can do the same with any transparent png that you may have.