existing operating system

Similar Questions

• I bought a "Windows Vista SP1 Upgrade disc" Wal-Mart and on the accident. I thought it was a full version, but turned out to be upgraded. How can I install this drive to upgrade on my computer if I do not already have an existing operating system?

  I bought a "Windows Vista SP1 Upgrade disc" Wal-Mart and on the accident. I thought it was a full version, but turned out to be upgraded. How can I install this drive to upgrade on my computer if I do not already have an existing operating system?

  You need a disk FULL/license to do a clean install, not an upgrade license.

  Take it back to Wal-Mart and see if you can exchange it.

  See you soon. Mick Murphy - Microsoft partner

• Courses: All existing operating systems provide built in e-faxing, both send and receive capabilities? __

  E-fax: all systems existing operating provide built in e-faxing time send and receive capabilities?

  Hi SwingDancerman,

  Please see article with details about Windows Fax integrated:

  http://Windows.Microsoft.com/en-us/Windows7/faxing-frequently-asked-questions

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Pavilion dv7: how to move the existing operating system from the hard drive to an SSD added

  I would like to add an SSD for my laptop, and then use it for the OS from W7, leaving the HD for data.

  Hello

  Try the following procedure:

  b mount SSDS in an external enclosure or a USB-SATA Adapter,

  b clone existing external SSD HARD drive,

  (c) swap drive HARD, SSD,

  d to the outer envelope (above) and form HDD mounting,

  (e) to the HARD disk formatted to the second span.

  Good luck.

• How I removed an operating system in the Boot Options?

  WHEN I START WINDOWS VISTA I HAVE TO CHOOSE BETWEEN 2 OS AND I WANT TO ERASE THE OTHER.

  Mind you DO NOT post in all capitals.

  It makes it difficult to read.

  You don't say how you have managed to get 2 operating system installed.

  I suggest do a clean re - install, delete the existing operating systems during the process:

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Re: Reinstalling operating system on Satellite A100 without deleting the other existing partition

  Hi all

  I have a Satellite A100-912 and have not reinstalled the operating system (Windows XP) for several years, but now I think that my laptop works well below par. I have my product recovery CD (disk recovery) and it will use for the re-installation.

  I have three partitions on the HARD disk (c, d and e, respectively).

  I was wandering if it would be possible to reinstall (get as long as the factory) my operating system on the c partition without erasing the data (for example my files) on partitions d and e.

  I did this on a Toshiba Satellite L10 using suggestions in this forum, but I don't know how to do it on my own. Is the user interface for the recovery/re-resettlement is not the same thing, so I'm afraid to lose my data if I proceed with the re-install without knowing what to do.

  Could you please say on how to make the re-installation of operating system only on the c partition without deleting (data on) other existing partitions.

  Thank you!

  > I was wandering if it would be possible to reinstall (get as long as the factory) my operating system on the c partition without erasing the data (for example my files) on partitions d and e.

  No, this is not possible. The recovery disk would format the whole HARD drive and therefore the partitions created on the HARD drive would be so removed.
  I recommend you to create a backup of the files before starting the recovery procedure.

• -A file association problem exist, which prevents the file you are trying to download from being associated with the correct application of the operating system using the windows 7 IE 11

  --	Is a file association problem, which prevents the file you are trying to download from being associated with the correct application of the operating system

  IN USING THE WINDOW 7 IE 11 HOW CAN I FIX IT?

  Try to download the installation offline programs:

  • Adobe Reader
  • Flash Player for Internet Exporer - ActiveX
  • Flash Player for Firefox - NPAPI

• Had to reload operating system and applications data, now can't get firefox to recognize the profile data

  My C drive (disk solid state drive), which held my operating system and data from the app crashed. I had it replaced, updated Win 7 to win 10 and have downloaded Firefox. I was able to restore my profile from a Mozy backup data and copied in the Firefox folder. But Firefox resolutely refuses to recognize. I tried using the recovery data from an old profile, but no advantage help page. Tried to use the Manager profile, but without success. When I go to Troubleshooting Information and click on file/Show profile, it comes up with a list of files (files starting with bookmarkbackups, which however is empty, down for webapps, which has the file inside webapps.json), then the files from addons.json down through xulstore.json and the file places.sqlite is 10 240 KB Although there is something in there, but Firefox resolutely refuses to acknowledge my profile, bookmarks, etc..

  I'm out of options and ripping my hair out trying to get all my favorites, in which I have a lot of information such as the authentication of data for many favorite sites. It is frustrating that all the information seems to be there, but Firefox ignore all.

  Can anyone help?

  Such a backup is perhaps a ZIP archive containing all the files into it if it is not a real file, but only one file.

  Note is that you replace the file places.sqlite with a copy of the backup that you have to make sure to remove existing places.sqlite - shm and temporary files to SQLite places.sqlite - wal.
  Ditto for the other SQLite files that you are restoring.

  Have you checked the application.ini file in the backup?

• synchronization of bookmarks on the new operating system

  Computer work migrated to a new operating system (XP to W7), I created an account to sync to save bookmarks and versions etc. the installation. How can I get my info on the computer? I tried "Pair the device", but this is the same computer, and the option does not work.

  Hello vanaya2002, firefox sync was not primarily as a backup service, but to keep multiple devices on the same plane.

  in order to access the data in your sync account, you would need three elements: user name, the password and the recovery key that is generated when the original configuration of the account.
  
  where you have all these three pieces of information, you can go to firefox > options > synchronization > sync Setup > I have an account > I don't have the camera with me to link firefox to your existing account.

• Qosmio F30-114 - a problem with the installation of operating system

  Hi all
  I have a problem during the installation of operating system from the recovery disk (Win XP Media Center Edition).
  After loading the disc, I seen the installer welcome window, set up all the parameters in it and pressed the OK button.
  After that, an error has occurred (in a black console window):

  Check the type of partition MBR
  Not FOUND: Partition ID 4 is 0x00 not 0 x 88
  Seeking the TMBR
  No found TMBR!
  Fact.

  Microsoft DiskPart version 5.2.3790.1830
  Copyright (C) 1999-2001 Microsoft Corporation.
  On computer: MININT-JVC

  Disk 0 is now the selected disk.

  Services of disk management cannot complete the operation.
  Specified drive does not exist.
  ERROR: E:\04629R01 Reco-unpacking. TPA has failed!
  Press a key to continue...

  After reading this message and pressing a computer key restarts and that's all that happens.
  Also I can not install another OS (Win 7 for example), during the last part of an installation, I get a message "the work cannot be completed.".

  That's happened? I don't understand what is the reason for this problem. I was reinstall another OS (the drive recovery too) often earlier and everything was OK.

  You can install WXP using the Microsoft installation disc?
  Set the BIOS on the settings by default and to use the recovery disk again.

• The port Thunderbolt can we adapt for USB3 ports. I have a laptop Macbook Pro with processor 2.2 Ghz, HDD 256 GB, 16 GB of memory, operating system El Capitan. I want to add up to three additional 3 USB ports with an adapter. Is there an excellen

  I have a laptop Macbook Pro with processor 2.2 Ghz, HDD 256 GB, 16 GB of memory, operating system El Capitan. I want to add up to three additional 3 USB ports with an adapter. Here are all excellent adapters available on the market to achieve this goal? If so, what are they, and they are available to plug in the USB ports and / or Thunberbolt on my laptop?

  I purcahsed an adapter but it only matches a port of type C, which is not on my new laptop.

  Thanks,-John D.

  What month / year is your Macbook Pro?

  Also is what size?

  i.e. of Macbook Pro (13 "Early 2011)

  If you need a crush on USB3, see this OWC. http://eShop.MacSales.com/shop/Thunderbolt/dock/OWC/Thunderbolt2-dock/?_ga=1.216 256982.1355932382.1452374654

  If your existing computer has USB3 ports, you could get a USB3 hub.

  Kim

• How can I remove the Windows Equium A60 operating system

  How can I remove the Windows of my Equium A60 computer operating system?

  If you want to have the own pre-installed OS simply use sent recovery CD/DVDs. Before installing the OS launches the disk HARD integer will be deleted.

  If you have t n, use the facilities of Microsoft CD. You will find the option to format the existing partitions or even to delete the partitions.

• Qosmio G30 - need two Windows operating systems: Vista and XP

  Hello

  can someone help me on the following application procedures:
  I need two operating systems on my Qosmio: Vista and XP
  I have two drives RAID inside my Qosmio and I installed Vista on the first.

  I tried to install XP on the second hard drive and I did (I have inserted XP installation disk and sellected second disc for installation), but after installation I got just the XP startup option.

  I can see all the files of Vista on the first disc, but allows boot XP only. Directory Windows XP was intalled on second drive, but boot.ini and some system files have been at the root of the first disc.

  I liked Vista and I repeated the procedure (with my recovery CD of Vista) and now I have Vista on the first disc and all files of XP on the second disc. I do not study how to get full XP on the second disk bootable system.

  What I need:
  Vista on the first hard drive.
  XP on the second disk

  I would have completely independent Windows System. This means that I have to start selection of BIOS, not Vista or XP.

  Hello

  It's very strange. If you have installed the first Vista and XP as a second OS then the Vista boot manager must exist usually.

  Please note that Vista uses 2 partitions. A partition is not visible. I hope that you have installed XP on this partition.

  In any case, I recommend you to create a new partition on the first HARD drive and you could install XP as second operating system.

  After this installation, you can use applications freeware like EasyBCD or VistaBootPRO to change the Vista Boot Manager.

• Windows XP operating system hangs at startup - Satellite P105

  Purchase my operating system would boot directly into windows.
  This Jolt Tech from HP does a remote that I could print wireless. He has changed the settings I had to fix, but the one I have now, I can't.

  When the computer starts now I get a host with:
  Please logon on to register your fingerprints.
  Press CTRL-Alt-Del for a long time on using password
  and
  SQL Server who say - could not find the instance name specified (MicrosoftBCM)
  Please specify the name of an existing instance on the invocation of Sqlservr.exe.
  If you think that you install is corrupt or has been tampered with uninstall then re-run Setup to correct this problem.

  I don't want to use the software of fingerprint with the above message, I don't like.
  I would like for my laptop to load directly in windows without login stuff.

  I tried to solve the problem of the Toshiba forum who proposed to change the settings in the fingerprints management system. I tried and it doesn't work.

  The parameters as follows:
  (1) do not Ctrl-Alt-Delete message (not verified)
  2) allow market security single sign-on (checked)
  ((3) allow the user quick switching of (unaudited) technical support system information: Satellite P105) with option of the fingerprint XP Professional (Service Pk 3), T-2500 CPU @ 2.00 GHZ
  Memory 2048 MB Ram Nvidia Geforce Go 7900 GS

  Pleas reply and let me know.
  Would the upgrade using Vista, my firefox internet keep gel where I have to restart a lot of connections.

  Would that Service Pack 3 or something else.

  Thank you
  Duvall

  Hello

  What model of laptop do you have? It is a series of portable US?

  By the way; If your computer laptop doesn t start correctly from the first day of purchase then why you n t use the Toshiba Recovery disk and reinstall the operating system?

• Make sure you get all your drivers after the upgrade of your operating system

  I've seen a lot of post lately in which users try to upgrade their operating systems (Vista-> Windows 7 or Windows 7-> Windows 8).  Often the hardest part of this upgrade is to make sure that you get all of the available drivers and software in order to use the material.

  You can always download software and drivers for your laptop computer manually by visiting the HP support Web page and search for your laptop in the product number.  This document shows you how to locate the number for your product.
  
  However, the best way to download and install the software for your laptop is to use HP Support Assistant.  This application comes pre-installed on most computers but portable consumer is likely to be absent after a clean install or upgrade the operating system.  It will search all the drivers and other software that can use your laptop as well as updating existing drivers/software.

  I hope that you will find useful information.  Have a great day!