Windows XP operating system hangs at startup - Satellite P105

Similar Questions

• Apparent compromise Windows XP operating system files

  During a scan, antiviral regular which was initiated by the provider of the antiviral software, the scan did not work properly (i.e., it is still indicating that the scan is in progress, but nothing happens - no status progress which is now 50 + hours).  Contact the vendor of the antiviral software, they gave me the steps to perform a disk cleanup and then a reboot of the mode without failure followed by steps to remove TEMP files.  At halfway through the disk cleanup process, a pop-up window has stated that: "Windows - files required for Windows File Protection is running properly have been replaced by unrecognized versions.»  To maintain system stability, Windows must restore the original versions of these files.  Insert your Windows XP Professional Service Pack 3 CD now. "The Windows disks have not inserted according to the instructions, but instead, I contacted the antiviral software vendor to make sure that there is no unintended consequence.  The software provider antiviral indicated that Microsoft should be contacted as there can be some files that have been compromised that stopped the disk cleanup.  Windows XP (version 2005) operating system was pre-installed by the company of Toshiba laptop.  Question: I should restart the disk cleanup process as described by the antiviral software provider, and if there is another popup window indicating the information as mentioned above, service pack of Windows XP CD should be inserted?  Note: I was told Toshiba CD provided by them for the laptop contains the Windows XP operating system software.  The two provided Toshiba CD entitled, "Recovery and Applications/drivers DVD Satellite A100/A105 Series."  Question: Are there possible negative conseguences because the provided CD/DVDs have possible applications and drivers on them?  Thank you.

  Friend Software

  Hello

  · What is the name of the antiviral software that you use to run the virus scan?

  · You have security software installed on your computer?

  Check out the link that contains information about what is protection of files below. Link: Description of the Windows File Protection feature: http://support.microsoft.com/kb/222193

  1. I suggest to run the auditor of system files on the computer, you can check the link below: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  2. during the file system check scan if you are prompted to insert a CD Windows XP SP then you can follow the steps from the link below:http://support.microsoft.com/kb/900910

  3. once the Analysis System File Checker is complete. You can run Disk Cleanup.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm having a problem with my Windows Vista operating system. Problem started on 19 February 2011.

  I'm having a problem with my Windows Vista operating system. I have a Toshiba Satellite A135-S2376. Problem started on 19 February 2011. Computer continues to display Windows Explorer or Microsoft Windows has stopped working messages. Cannot run all programs, sharing disk cleanup, System Restore. Cannot download IE 9. Help, please! For example: tried to run MP3 Rocket he was trying to load & then a message appears at the top that States platform Java cannot run or something to that effect. Basically, I can't run any program that needs to use Microsoft Windows.

  Hello

  You can try to do a system restore before this date

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware scan

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Version of the operating system incompatible with Startup Repair tool

  I'm trying to reimage dell inspiron 1525. Operating system is Windows Vista. Error received halfway through restoration. Has been reduced to system recovery options. Startup Repair has chosen to be tell version of operating system incompatible with Startup Repair tool. Now I cannot do anything else.

  Hello
   
  1. you use the correct version of the Vista disc to run Startup Repair?
  
  2 you also all error messages /codes when you startup repair?
   
  I suggest to run the diagnostic tool memory WINRE mode and check if the memory (RAM) installed on the computer works fine.
   
  Follow the steps below to start the computer using the WINRE and run the memory diagnostic tool.
   
  a. Insert the Windows Vista installation disc.
  b. restart your computer.
  c. If prompted, press any key to start Windows from the installation disc.
   
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
   
  d. choose your language settings, and then click Next.
  e. click on repair your computer.
  f. Select the operating system you want to repair, and then click Next.
  g. on the System Recovery Options menu, select the memory diagnostic tool.
   
  Once scanning is complete, check to see if the problem is resolved.
   
  Access the link below to learn more about Windows recovery options in Windows Vista.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem
   
  If you have several sticks of RAM installed on the computer, you can try to remove one of the RAM stick and check if it works very well. Also, you try to exchange the RAM sticks and check if one of the RAM is originally this issue and if it needs to be replaced.
   
  Note: If you are not aware of the evolution and swaping the stick of RAM on the computer, it is best to contact the computer manufacturer for help on this and you can do it at your own risk.
   
  You can also contact Dell support and check if you need to replace any hardware.
   
  Aziz Nadeem - Microsoft Support

• Do not open programs after installing Windows update operating system Windows Vista

  Original title: MS Office programs do not open after installation of Windows update to Windows Vista operating system

  After having decided to install the Windows Update my computer told me was available all my software as my programs MS Offfice is no longer open.  I don't know what to do.  The only thing that still works is the Windows Media Player.  I can't open Word or Excel, I can't access my photos.  Open Internet Explorer is like a weird nightmare but I am able to access the Internet.  I tried reinstalling my MS Office software, which did not work.  I have no idea what to do to solve the problem, but I need my computer back. It was good except for its slow, when I open certain programs, now I can't access something.  Any ideas what I should do to correct the nightmare?

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For questions of office:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

   

  Theywill help you with your office questions when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• How findout if all the partitions have been deleted and now a laptop that has Windows 8 operating system using Windows Vista with a shell IE 9?

  I bought a laptop broken at a friend's House. It is not used for the operating system windows 8 and wanted to use the Windows Vista operating system. Son of friends put in place this laptop for it, which was new when she bought in a retail store. Is there a way I can find out whether all the partitions have been deleted during the installation of Vista? I still see window 8 logo that I sign as an administrator user on this laptop.

  When I log on this computer, the previous owner of the screen name is the only one that appears. I go in Control Panel, click Add another account, then I see the screen name I posted. I could use the WiFi from my PC at home that Win 7 OS.

  When I started working with the laptop, I was able to bring control of the camera. Now I thought that the version that I use does not allow this operation. Be happy with any Positive help with my problems.

  Thank you

  Phil W.

  Hello

  Start > type CMD

  Right click on CMD and select run as administrator

  Type diskmgmt.msc

  Press enter

  This opens where you can view the partitions on the disk management system

  Who has installed Windows Vista, your son or friend?  Fact that they create a dual boot environment or reformat?

  http://www.technorms.com/8438/Windows-8-create-hard-drive-partition

  Multibooting requires separate partitions on the hard drive of your computer for each operating system.  To create and format a partition, see create and format a hard disk partition.

  To check if a dual boot system in place, start > Type msconfig

  Click on the Startup tab

  You see two operating systems listed?  Windows 8, Windows Vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/how-to-change-default-OS-for-dual-boot-system/

  I think that Windows 8 has the following partitions

  400 MB Partition Recovery (contains recovery information dated from before my upgrade)

  • 300 MB EFI System Partition
  • 350 MB Partition Recovery (contains information for recovery of my upgrade)
  • 17 GB Partition Recovery
  • 220 GB of Partition primary

  Windows Vista has drive C and drive D

  Done reformatting refers to a hard disk or partition that already has been formatted or that contains data on it. Reformatting a disk deletes all the data on the disk.

• Why I can't install iTunes on my laptop with the Window 10 operating system

  Why I can't install iTunes on my labtop with Window 10 operating system

  Have you downloaded the latest iTunes from here and correct version

  https://www.Apple.com/iTunes/

  and then run the downloaded installer.

• Desktop HP HPE h9-1150 Phoenix: can you do a update the BIOS of Windows 8 while on a Windows 10 operating system?

  As indicated in the title, you can do a BIOS in Windows 8 update while on a Windows 10 operating system?

  I have a Phoenix desktop h9-1150 and am trying to install a new GPU GTX970. There is no updated BIOS for Windows 10 at this time, but there is an update of my current BIOS 7.07 for Windows 8 OS. Can I do that Windows 8 updated safely?

  Normally the flasher will check to verify the operating system, but I can't on this one.  It does not separate out ROM file, even if it does not check if the operating system you can always extract the file BIOS and flash BACK.  I would try it first in windows.  It will tell you if there is a control in place.

• Re: Serial number down would work with the other Windows Vista operating system

  First of all sorry for my English.
  I have one question.

  My hard drive is broken with my recovery partition.
  If I download windows vista and install the system with my original serial number on the laptop, this will work or should I activate it after installation.

  I hope it's the same number that the front is installed on my first installation.

  Hello Marcin

  I doubt that the serial number that is placed at the bottom of the device works with another Windows Vista operating system. But it s worth a try
  You could test it I heard it's very rare cases it was possible

  In any case, if your HARD disk is damaged and it of not possible to create a recovery DVD using recovery software Toshiba disc creator, then you must contact the ASP in your country for assistance.

  If the warranty is valid the HARD drive should be replaced just for free. If you need only the recovery DVDs, then you can order it here:

  https://backupmedia.Toshiba.EU/landing.aspx

  Concerning

• The Windows Vista operating system on dv9000 was arrested.

  The Windows Vista operating system on my laptop dv9000 stopped by Microsoft citing an expired licence. It is preinstalled by HP OS.

  How can I get my BONES restored without having to buy a new one?

  lbwhorms wrote:

  The Windows Vista operating system on my laptop dv9000 stopped by Microsoft citing an expired licence. It is preinstalled by HP OS.

  How can I get my BONES restored without having to buy a new one?

  You may need to contact HP in your region or Microsoft by phone.

  If he please go through these papers & try the above first steps:

  Activation of Windows Vista operating system

  You may be prompted to activate Windows Vista on a computer on which Windows Vista has already been activated by a license in Volume or OEM installation

  Concerning

  Visruth

• Is there a practice of the Windows Server operating system environment?

  I'm looking to get some practice with the Windows Server operating system (2008 or other).  I came across the downloadable 180 trial period, but I don't mean to create a true server temporarily.  I'm looking to be able to have a completely 'virtual world' where I can actually add devices and simulate connect with different computers, etc.  I want to create an environment of virtual server completely, not the 180-day trial period where I create an environment that can have real computers to connect to it.  Such a thing exists?

  For example, I used a program called Packet Tracer that allows me to simulate the addition of routers, switches and high-end devices to create a whole network of Physics in a virtual environment.  I can configure devices with IP address and all that I can learn how to build a physical network.  I would like to do with the operating system Windows Server if possible.

  Thank you.

  Hello

  It would be preferable to repost the question to the Forum Windows Server help.

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Setting up a Test environment

  http://TechNet.Microsoft.com/en-us/library/cc747673 (v = WS.10) .aspx

• How can I register my Windows 7 operating system?

  How can I register my Windows 7 operating system?

  Thanks, P.B.Mohan

  Windows Update has nothing to do with it. This post here instead, questions please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I need the drivers to scan for a HP Scanjet 2300c for a Windows 7 operating system.

  I need the drivers to scan for a HP Scanjet 2300c for a Windows 7 operating system or compatible driver.

  Hello.

  According to HP, they offer no drivers for Windows 7, but in many cases the driver for Vista works on Win 7, then you can try this. If you have 64-bit Windows 7, then download Vista(64-bit), if you have 32-bit Windows 7, download Vista.

  The drivers can be found here.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=no&cc=no&prodNameId=73502&TaskID=135&prodTypeId=15179&prodSeriesId=73500&lang=no&cc=no

• What is hp psc 1355 all-in-one printer scanner copier compatible to be used in the WINDOWS XP operating system?

  I have a hp type copier printer scanner hp 1355. I need a driver (software) for this.  If the HP all-in-one device is not suitable for use on WINDOWS XP, is it possible to use hp 1355 in the WINDOWS XP operating system? Thanks FOR YOUR HELP.

  Hey Fed-Up-with-HP,

  Try using the brush included in the CD or download. Let me know what you find?

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-23606-3&cc=US&DLC=en&LC=en&os=228&Product=306898&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-23606-3&cc=US&DLC=en&LC=en&os=228&Product=306898&sw_lang=

  10. run the download to reinstall the printer

• I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  ===============================================
  You can resize a picture in WLPG but if you want to change the .dpi you
  need a different application.

  Information about resizing...
  Right-click on one or more selected inches... Choose... "Resize" in the menu.
  Choose a format, access a folder to save in the left click the ' resize and
  Save "button. (I suggest that you save the photos resized in a new folder
  to prevent the replacement (replacement) the originals)

  Take a look at the following link:

  Resizing Photos in Windows Live Photo Gallery
  http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspx

  In addition, the free software IrfanView can change dpi. Simply open a photo in IrfanView
  and go... Image / information. Enter the resolution you want in the resolution
  fields and on the left, click change. Then go to... File / save as... and save
  your photo altered with a new name.

  IrfanView
  http://www.software.com/IrfanView
  (Download plugins too)
  http://www.software.com/IrfanView-plugin

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.