Expand the fonts folder in Windows

Similar Questions

• How to disable the "Fonts" folder in Windows Explorer?

  Hi all

  I have a problem to deactivate the fonts folder in Windows Explorer.
  My question:
  How to turn off or do not display "Fonts" in Windows Explorer my computer tab?

  I think it is unnecessary because it already exists in the Control Panel folder.

  If anyone can solve this, thanks in advance.

  Windows customizes the Fonts folder and offers a special folder view that allows you to hide variations, such as bold and italics. It also allows you to change the display settings of the file in a way that is specific to fonts. If you remove the read-only attributes and the Fonts folder system, these custom display settings not available. For folders that you have customized by using the tab, Customize dialog box Properties of the folder, the folder icon and other other customizations may be missing when you remove the read-only attribute.

  Source link: http://support.microsoft.com/kb/326549

• Cannot open the fonts folder in Windows

  I can't access my fonts in the Windows/Fonts folder. When I opened, it leaves just a blank window and unresponsive. I tried to access them through the fonts in the Control Panel, but yet cannot access.

  TweakUI is not compatible with Windows 7.
  See the Compatibility Center Windows 7 link below.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=tweak%20UI&v=Microsoft&UID=2&pf=0&PI=9&c=utilities&SC=PC%20Management&OS=64-bit

  Look at a siimilar post and see if it helps the solution.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/is-there-Tweak-UI-for-Windows-7/e1e547a4-4c7f-E011-9b4b-68b599b31bf5

  Sincerely,

  Marilyn

• Cannot paste fonts in the Fonts folder more!

  Hi, I searched until I post and no solution has worked.

  Cannot paste/drag & drop/right click > install new fonts in the fonts folder.

  And I hear a beep when I try to paste fonts (as the file is locked or restrict access).

  I can see the text of dough activated when I right click on the fonts folder, but it is not sticky.

  I can stick anywhere except the fonts folder.

  Active windows firewall +, updates are up to date.

  And I suspect just in windows updates, because the installation of fonts not working 2 days ago!

  Thank you...

  Repeat?

  Paste the fonts?

  Each font that I never downloaded comes in a zip file

  You do a right click on this folder and extract all

  You open the extracted folder

  You click the font you want to install windows previews and has a button to install :/

  

• How to change the font size in windows diff that is email; Word; etc.

  How to change the font size in windows diff i.e. E-mail; Word; etc.

  Try the following: (Note: you must be an administrator to do so)

  1. go into the control panel.

  2. double-click on 'ease of access '.

  3. click on "make the computer easier to see.

  4. click on "change the size of text and icons.

  5. click on "Continue" to the pop-up message.

  6. Select "larger scale (120 DPI)(-rendre le texte plus lisible) and click on 'OK'."

  You need to restart for the change to take effect.

• How to change the location of the installation folder of Windows of drive c to any other drive in windows 7

  How to change the location of the installation folder of Windows of drive c to any other drive in windows 7

  When you install a program, you normally have the opportunity to take the default or custom installation.  If you choose custom, you can specify where the program will be installed.

  Good luck.

• How permanently increase the font size in windows applications

  How permanently increase the font size in Windows applications as for example the mail application? The letters are much too small, and my eyesight is perfect! Thank you

  Sign of salvation,

  Welcome to the Microsoft community forum. From the description of the problem, it seems that you want to change the font size for the user interface modern app.

  You can change the modern user interface text size by going to the charms > settings > change the settings of the PC > PC and peripherals > display

  

  Also see this Microsoft article:

  http://Windows.Microsoft.com/en-us/Windows-8/make-text-screen-larger-smaller/?v=t

  Windows 8.1, you can now set the DPI (Dots per Inch) scale to make text and other items, such as icons, fonts and windows, to more or less important for all display or by display screens.

  Windows 8.1 DPI scale improvements are mainly focused on:

  • Optimization of ergonomics and the readability of displays high-resolution
  • Offering an experience uniform multi-screen systems
  • Give developers optimize app specific scale based on display DPI

  If you are using a resolution of 1366 x 768 display on a shelf, chances are that UI will look good 100% ppp settings. But what about when you connect the tablet to an external high resolution? In Windows 8, you can choose either 100% in order to optimize the user interface on the screen of the tablet or display up to 150% in order to optimize the user interface on the outside. You have to make compromises.

  8.1 Windows takes care of this issue pressing address scaling of IPR by display . By default, Windows 8.1 will choose the optimal DPI scaling value for each display based on the value selected for the global scaling in the control panel.

  You can also view the suggestion provided by Shawn on this thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-ECOMS/how-does-one-increase-the-size-of-the-text-of/58c7f3fe-8686-4422-ad36-8ab75515527f

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• What is the name of the font used by Windows 7 when it lists the files etc in a folder?

  I want to change a text Notepad to the same font that is used by Windows 7 when it lists the files in a folder... What is the name of the font?

  Hello
  
  Windows use Tahoma as default font in Windows Explorer. You can try to use the Tahoma font and check if you like that.
   
  I hope this helps.
   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can't open the fonts folder in Control Panel.

  When I double click on the folder icon fonts in the Control Panel window, it will not open. It freezes and becomes inadmissible. Then I click on cancel X at the top right of the window and he said: there was an error and must be closed. The whole desktop disappears and then reappears. What is going on? And how can I install my fonts?

  Hello Sparkybell1734, welcome.

  1 how long this issue has been produced?
  2. what level of Service Pack of Windows XP you are using? SP1, SP2, SP3?
  In addition, try this to see if it solves the problem:
  1. click on START
  2. click on 'run '.
  3 type C:\Windows\System32\dllcache and press enter
  4 checks if fontext.dll . If it does, get a folder C:\Windows\System32
  5 find the fontext.dll in this folder and delete it
  6. restart your PC and try to open the applet in the control panel fonts
  ---
  If it does not, as another method of installation of the fonts, you can always copy and paste the font file in C:\Windows\System32\Fonts
  Let us know what happens
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need to know where in the system folder of Windows Vista, I can access the printer for a shared printer drivers .inf files

  I have a printer that is attached to my system down Dell Windows XP, I want to access the floor running Windows Vista from my Sony system.  I managed networked the printer so I can see it in my Sony Windows Vista network folder.  However, when I try to access it, it gives me the following error msg:

  The server to the printer 'HP Photosmart 1215 series' doesn't have the installed printer driver.  If you want to find the right driver, click OK

  Otherwise, click Cancel and contact your network administrator or the original equipment for the printer driver manuafacturer.

  I advanced and clicked on "OK". and the system brings up a box for me to find the correct INF file to load.  I went ahead and tried the DRIVERS/WINDOWS/INF and a few other places, but has failed to find (any) of printer drivers

  Can someone tell me where I can get these?

  Download the appropriate driver from the printer manufacturer's web site.  If it contains a Setup program, run the program and when it asks you to specify the printer installation, create a local printer whose name is \\xpsystem\printer where 'xpsystem' is the charing system printer and "printer" is the name of the share.  This should create the printer.

  You can also expand the downloaded driver and try to add the printer as you did before, direct the installation to the folder containing the driver that you downloaded.

  Brian Tillman [MVP-Outlook]

• In Windows 7, selecting "Automatically expand to current folder" in Windows Explorer, it does not work

  In Explorer windows (win7... new laptop...?) activating the box "Automatically expand to current folder" does not work. I went through tons of forums and no one can answer this recurrent problem.

  If I navigate through the folders in the left pane using the arrow keys: the right pane should follow! and display the contents of the folder.

  What is the difference with the guys who claim that this box, it's employment and tons of guys for whom this box makes no difference at all including me?

  Please provide a solution! Many of us will enjoy!

  OK, so now that I've been messing around with this problem its as magically started working for the first time (within 6 months) on my personal laptop...

  I think I know what fixed it. I remember toggling the 'automatically expand to current folder' option in right mouse click an empty link in the navigation pane (it was already placed on). When I did it first, it did not work. I remember deselection and then selecting once again, and it still doesn't work. I went back to folder options and (this is where it gets fuzzy) I think I've deselected and not selected again from there, still no luck.

  So I opened the registry to verify automatically expand them to current folder key is set to 1. It was so I let fall, don't make any changes to the registry. I posted the above comment and left my PC, still running, no reset.

  9 hours later I come home and hey presto all his work.

  Go figure.

  Now that his work, using the Folder Options box still does not work with it all - either to the value on or off. Using a right-click in the browser window works, but the effect is not immediate. We need to change at least a folder selection (double click on a folder) in the file list pane before the change takes effect.

  I'll test this fix some information on other portable dozens that have this problem and present the results here.

• Increase the font size of windows Dreamweaver (not the code mode)

  I can't find a solution to this and hope someone can help.  I need to expand my vision of the DW on my screen.  Not the code view, I found that.  Everything else - all windows (file list, assets, snippets, css... all these windows development.  It's much too small for me.  Any help would be appreciated!  Looks like an easy thing, but I can't.  Thank you!

  Looks like you are using a high DPI monitor?

  With the exception of Windows 8, DW is not "High DPI aware" yet. Adobe knows about the issue and is working.

  Meanwhile, the workaround is to increase the size of the fonts in your system.

• expand the volume of original Windows disc C y

  I have original lWin & and my drive C is full. I need to expand the volume of the E drive.

  I tried the disk management, but I can only reduce. He can not open the link of the extension of the volume. What I would do.

  Do I need to do a format and a recovery CD and reinstall or something else that is not harmful if you please.

  Thank you very much

  Hello

  What version of Windows are you using? XP, Vista or Windows 7?

  Repartition: (make sure you have redundant backups because accidents happen)

  How to resize a Partition on Windows Vista & Windows 7, using disk management.
  http://www.WinVistaClub.com/T11.html

  How to shrink a Partition or Volume in Windows 7
  http://www.SevenForums.com/tutorials/2672-partition-volume-shrink.html

  How to extend a Partition or Volume in Windows 7
  http://www.SevenForums.com/tutorials/2670-partition-volume-extend.html

  How to use the Fdisk tool and the format tool to partition or repartition a hard disk
  http://support.Microsoft.com/kb/255867

  ----------------------------------------------------

  Create and format a hard disk partition
  http://Windows.Microsoft.com/en-us/Windows7/create-and-format-a-hard-disk-partition

  I can I repartition my hard disk?
  http://Windows.Microsoft.com/en-us/Windows7/can-I-REPARTITION-my-hard-disk

  Formatting disks and drives: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

  How to create a Partition in Windows 7
  http://windows7news.com/2009/09/23/how-to-create-a-partition-in-Windows-7/

  Windows 7 - create a Partition (HD) - video
  http://www.YouTube.com/watch?v=l2XmBGmYfGQ

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Problem: Sent mail is not in the correct folder in Windows Live Mail.

  I installed Windows Live Mail on XP this weekend and imported all my mail to outlook 2003.

  I have two accounts, both using IMAP and both with sent folders. There is also a generic sent folder below, as a catch-all folder and is where to send the elements of these two accounts are current.

  Is there a way to make sure that sent items go in the right folder sent for each account? I ticked the box: "save a copy of sent... items. "in the tools of-> Options-> Send.

  Thanks in advance,

  Aidan
  Hi AidanLynch,
   
  When you use Windows Live Mail and the question you have posted is related to Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.
   
  Windows Live Mail Forum
   
  http://www.windowslivehelp.com/forums.aspx?ProductID=15
   
  Hope this information helps.

• How can I change the destination folder to Windows Picture import in the Vista autoplay version. ?

  The destination folder somehow Autoplay went under the windows default 'Photos' parameter in a subfolder in 'Photos' when you use the option 'Import using Windows' Auotplay. Default AutoPlay program area does not choice for import folders, only actions to choose from. How can I change the default import folder back to 'Pictures' Autoplay when importing photos using Windows Vista import?

  If your Options to AutoPlay in Control Panel, Autoplay, devices, (your camera that there are listed) are defined to import pictures using Windows on the menu drop-down, then when you plug your camera you will get a low popup to the right of your screen.

  Click on Options, you will get an another popup that you can change the destination folder.