Expanded American advanced time - windows XP DST has no

Similar Questions

• Pavilion g6-2165sx: * URGENT Please HELP * short hard drive DST has no error RU773W-68R81S-MFPX1G-60W803

  Hello my problem occurred as a result of the creation or modification of partitions to install ubuntu (for reasons of college) however I stupidly didn't check my disk was dynamic or basic and unfortunately it was dynamic, if after failing to install ubuntu windows 10 had an error in INACCESSEBLE_BOOT_DRIVE when I oppened the cmd troubleshooting and checked on diskpart did not exist but with a status unknown after dvd player I made the diagnosis and that he got a short DST has not... Is there a chance to correct the reader because im out of warranty and im in no condition to buy a new hard drive... Thanks in advance

  @Alin742

  Go to this site and create a bootable CD.

  http://hddguru.com/software/2005.10.02-MHDD/

  Boot from the CD.

  If she asks do you want SCSI, click No or just press ENTER. (countdown to 30 seconds)

  The port selection select your HARD drive. (Usually 1, 3 or 6).

  If you do not see your HARD drive, you will need to restart and go into the BIOS and SATA ATA value.

  After choosing your type of HARD drive, ERASE and press to enter. (This will erase all data).

  Leave it to erase the entire disc. (Depending on the size, it may take 2 to 5 hours.)

  Once done erase all disk F4 2 hit shots and will start the test.

  Many people simply replace the HARD drive and all that is wrong is there is simply soft errors. (Errors caused by software not hardware errors.)

  If you need help running the program let me know.

  REO

• Time Windows keeps going back one hour

  After this past weekend, we noticed that on several PC time continues to go back an hour. Time zone is correct.

  The machines are regularly patches?  It is a year 2008 patch... DST has not changed since (that I know).

  Cumulative update time zone August 2008 for Microsoft Windows operating systems

  http://support.Microsoft.com/kb/951072

  John

• I get a runtime error spoolsv.exe with bluescreen evert time windows starts up and keep poping up.

  I get a runtime error with a blue screen Microsoft end spoolsv.exe ++ Runtime library he closed in an unusual way. When I start in safe mode I do not get the message.

  Hello

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  ================================================================

  If issues require more troubleshooting.

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

• Windows Vista Basic has stopped working on my laptop.

  After my recent updates, Windows Vista Basic has stopped working on my laptop.

  After my recent updates, Windows Vista Basic has stopped working on my laptop.

  Hey shousell

  stoppped working covers a lot

  If you can not start, follow these steps

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  or transfer your question in forum windows update link below

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Error 'Windows Media Player has stopped working' when playing a DVD-video.

  Original title: problems with Media Player

  When I try to play a VIDEO DVD, I get the following message: Windows Media Player has stopped working.

  Another problem that I have is all the time (which is usually) I click on a new Web site I get "cannot display this page".

  Microsoft has just downloaded Internet Explorer 11.  I don't know if the problems are related.  Thanks in advance.

  Thanks Zest2learn.  Because I had the problem, Microsoft has uploaded a number of updates.

  I think that one of these updates solve the problem.

• Firefox continues to run even after the release in Manager Windows tasks and has about as much memory to affect other applications

  Firefox continues to run even after the release in Manager Windows tasks and has about as much memory to affect other applications. Firefox.exe must be completed manually in Windows Task Manager. Is there a software patch that will force the release of memory and all the resources of the computer that was using Firefox, when it is finished?

  This has happened

  A few times a week

  == I see only the program in the Manager of tasks over the past months but the problem could took place for more

  See this:
  https://support.Mozilla.com/en-us/KB/Firefox+hangs#Hang_at_exit

• Matshita UJD360 burner will read CDs but get the error message indicating that Windows Media Player has to close when I try to burn

  HELLO, I HAVE A CD/DVD EXTERNAL BURNER, IT READS THE CD AND IT RECOGNIZES THE VIRGIN CD, BUT WHEN I PRESS ON THE "START BURN" BUTTON, I GET A MESSAGE SAYING THAT WINDOWS MEDIA PLAYER SHOULD BE CLOSED, HE DOES IT ALL THE TIME

  Hello

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it looks like you are facing some problem with Windows media player.

  He would be grateful if you can answer this question in order to help you further.

  1. which version of the Windows operating system is installed on your computer?

  2 have you made changes on the computer before this problem?

  3 is the issue limited only when burning to disc?

  I suggest you to consult the following Microsoft article if you are using the Windows XP operating system.

  Windows Media Player has encountered a problem and needs to close: http://support.microsoft.com/kb/555494

  If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• My Office Windows XP SP3 has been "glued" on stop, installation of update 6 of 12 for 15 hours and counting.

  My Office Windows XP SP3 has been "glued" on stop, installation of update 6 of 12 for 15 hours and counting.  I'm worried to turn it off because I don't want any major problems if it works again.

  Can someone please advise on what I have to do to go even faster.

  Thanks for any advice in the meantime.

  As a result of the survey above.  I 'bit the bullet"and shut down the computer and no damage seems to have been made.

  Time will tell I suppose.  Thank you

• Windows Update, error: "Windows Modules Installer has stopped working and was closed".

  Whenever I run windows update, and try to install an update for Vista, I get the error message"

  "Windows Modules Installer has stopped working and was closed"

  . This has happened for quite awhile and I tried many suggestions on the web. If you do an internet search, you will see this seems to be a fairly common problem, but I can't find any official solution of Microsoft. I am afraid that I do not receive the latest updates and security patches so would like to help with this question.

  Thank you

  Luke

  Hi guys

  I had installed up-to-date antivirus software and my problem seems to start after an update from Microsoft. Do a search on the web and you will see similar stories. I spent so much time trying to solve this I think it's better just to do a re-install. Certainly not the resolution I had hoped, but appreciate this type of questions are almost impossible to solve the problems through intermittent mail such messages.

  Thank you

  Luke

• Office automatic however, patch cumulative for Activex killbitts for windows XP (KB2736233) has failed. error code is 0 x 80070017

  During an office automatic however, patch cumulative for Activex killbitts for windows XP (KB2736233) has failed.   error code is 0 x 80070017... How to fix this?     He tells me that the installation failed, and when I close it, it asks me to install the update even.   Thanks in advance for the help.

  Hello

  1. have you made changes on the computer recently?

  2. What is the security software installed on the computer?

  3. are you able to install some other updates?

  4 is that the problem is specific to this update?

  I suggest you to follow the steps in this article and I would like to know the status.

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: '0 x 80070017': http://support.microsoft.com/kb/956704

  Important: While performing the check disk on the hard disk, if bad sectors are, check the drive will try to repair this sector. All the data available in this area may be lost.

  I hope this helps.

• Windows Media Player has encountered a problem and needs to close

  Original title: Window Media Player

  I run Window XP Professional Service Pack 3. My Window Media Player suddenly opens for a second and disappears again. I downloaded the software again, but nothing has changed. I downloaded Microsoft troubleshooting software, there is no full download, it came with "Troubleshooting cannot continue because an error has occurred 80040402 cod."  The last time I went to Media Player, he had an error message: "Windows Media Player has encountered a problem and needs to close. AppName:wmplayer.exe, Mod/worm: 11.0.6000.7000, AppVer: 11.0.5721.5262 Offset: 000aba9e, ModName: 01key indiv. I managed off option and need really professional help from somewhere.

  Walter

  Click Start

  Select Control Panel

  If it is in Classic view, select performance and Maintenance

  Select System

  Select the Hardware tab

  Select Device Manager

  In the list of devices, you see all of the devices listed with yellow exclamation points?

  If update you the device drivers for these devices from the device manufacturer.

• AVG found that Windows\xreg.exe has been signed with a digital signature broken by Leader Technologies

  AVG found that Windows\xreg.exe has been signed with a digital signature broken by Leader Technologies. Is - this someinthg, I'd be worried?

  See you soon

  KF

  Hi KieranFitzgibbon,

  1. did you of recent changes on the computer?

  2. are you referring to the xreg.exe or ereg.exe?

  If his ereg.exe, then it is related to the registration of Logitech products.

  Method 1

  I suggest that use you the Microsoft safety scanner to remove the infections of viruses or malware to the computer and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  You can also use Microsoft Security databases to scan your computer

  http://www.Microsoft.com/security/PC-security/MSE.aspx

  Method 2

  If the previous step fails then I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Windows Media Player has encountered a problem and needs to close, heartbreaking.

  Recently, while ripping the cd to Windows Media Player 11 on XP Service Pack 3, I'm frequently getting the message "Windows Media Player has encountered a problem and needs to close."  It happens usually during the second or third disc.  I then close and reopen and am immediately able to rip the CD.  Sometimes the player will immediately be closed as soon as I click on "start rip."   Any ideas?

  The same thing happens if you rip to MP3 or WMA?

  Post here the technical details of the accident. Go to Start- run , type eventvwr.msc , and then press ENTER.

  In Event Viewer, access to the application log and look for an error in the list, there should be two entries for the last crash. Double-click on these two events and copy/paste their description in your post.

  Tim Baets
  http://www.BM-productions.TK

• Windows Media Player has encountered a problem...

  "Windows Media Player has encountered a problem during the synchronization of the file to the device. For any additional help click web help. »

  This is the last error I get. Web site of Microsoft, and then said: you received the C00D1236 error message when you use Windows Media Player. Cannot sync the file.

  So, what led up to it is:

  1 problems with the device for a long time.

  2. Finally studied and found the latest firmware and update the device. This fixed some problems, which is excellent, but caused worse problems.

  3. I was getting: "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. "on several random files. He could do and then if I deleted everything and tried again, it could do with different files. He took too long between files during synchronization. So, I found this post: http://forums.sandisk.com/sansa/board/message?board.id=clip&message.id=18501&query.id=12003#M18501 and formatted with Windows Media Player. (I've now formatted every way possible, I think.) Of course, we fixed it. Problem files synchronized immediately, but then almost all my other files could not synchronize with the most recent error.

  A. in addition, the playlist does not work. Even if I get the playlist on the device, there is no songs in there. Songs/podcasts are only available through other classifications.

  B. After you have installed the program to update the firmware, there is now a remnant TSR who dies when I plug my video. "Universal firmware updater for Sandisk Sansa MP3 players has stopped working". Can I disable or uninstall this program, but it's just another problem. I am running Vista with all latest patches.

  Any help? You will be able to synchronize all files and playlists will work well.

  AHA! I think that I thought about it. I deleted all files in the Cache files of Player\Transcoded of AppData\Local\Microsoft\Media and now everything is sync again.

  He always does this weird thing once again. When the screen is black and I'm listening to something, if I hit the ring of command, as for example, hit the screen do not necessarily come back. I guess I should start another thread for this. It seems that there are different features that work better or worse according to the USB mode. I didn't know there was such thing before this problem.