expdp using network_link (link not valid name)

Similar Questions

• Object not valid name tincan

  I'm trying to stream video from a Flash Media Server using AS3. I get an error that I can't understand. In my NetStatusEventHandler I get event code "NetStream.Play.Failed. The error is: "object not valid name tincan (stream ID: 1)" it means absolutely nothing to me and I could not find any documentation on the meaning of this error.
  
  PROBLEM SOLVED: I was including the name of the file in the URI of the NetConnection.connect() method
  
  
  
  NOTE: I also posted this in the Flash Media Server forum because I didn't know where this issue better adjustment.

  I'm trying to stream video from a Flash Media Server using AS3. I get an error that I can't understand. In my NetStatusEventHandler I get event code "NetStream.Play.Failed. The error is: "object not valid name tincan (stream ID: 1)" it means absolutely nothing to me and I could not find any documentation on the meaning of this error.

  PROBLEM SOLVED: I was including the name of the file in the URI of the NetConnection.connect() method

  NOTE: I also posted this in the Flash Media Server forum because I didn't know where this issue better adjustment.

• I get the following message when you use Safari and Firefox. Works in Chrome: "we're sorry, the link that brought you to this page is not valid."

  I'm working with my bank account online and I get to the homepage very well. When I select the online banking, estatements, I get the following message when it tries to link to the electronic statement page.
  "We're sorry, the link that brought you to this page is not valid." Chrome has no problem displaying this page, but Firefox and Safari gives me the same message.

  Note that I posted this already above, but don't not checked if she was tried.

  You may need to allow cookies from third party (visited or all).
  
  
  To view the history settings and cookies, choose:

  • Firefox > Preferences > privacy > Firefox will be: "use the custom settings for history".

• On initial Setup, I enter a computer name using only valid characters and get an error message saying that some characters are not valid.

  I installed Win7 using a .wim that I used successfully several times before. The .wim is on my USB and the computer is not connected to the network. Using a disk to start Windows PE and imagex, I applied the image. When Windows 7 was started for the first time and prompted me to a computer name, I entered a name with only lower and upper case characters. An error message told me that some characters that I had used were not valid and listed the characters not valid, which I had used.

  What is my next course of action?

  I did a hard reboot and Windows later accepted my computer name.

  This has been resolved.

• The account name is not valid, or the password is invalid for the account specified using Cobian Backup 11 name

  I did a new install of Windows 7 Professional on a workstation, and after all the updates, I installed Cobian Backup 11.

  When you set up backup Coabian first, the message "the account name is not valid, or the password is invalid for the specified account name" was shown.

  I went into the "services.msc" to manually set the password for the connection (the machine connects in a Windows Server 2003 domain), but when entering the dialog (properties/connection/account/local/search/select where you want to search for.) only the 'local computer' is displayed.

  I tried to enter the domain/user and the password manually, I logged in as administrator, I have excluded the uder from the server and have included him again, that I did everything in my mind but I couldn't solve the problem.

  Any help is welcome.

  TKS in advance.

  PS: Someone asked me what support Cobian said about it. To be honest I did not support Cobian because the other four machines were all as one that has the problem and two "local computer" and "directory of the whole area" appears.

  This retail driver to believe that the problem occurred is on the installation of windows 7 Professional.

  Hello

  We have dedicated support team for users on a domain network. I suggest you to report your query in the TechNet forums to improve assistance in this regard.

  Here is the link:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro&filter=AllTypes&sort=lastpostdesc

  Hope this information helps.

• Error: "\\(PC Name) is not accessible." You might not have permission to use this network resource... The specified network provider is not valid.

  Hi, this is a follow-up to the issue and my second attempt to find the solution. In addition, it is still connected to my first and second positions.

  My laptop that works with Windows 7 32-bit has 2 two natural questions:

  1. I can't access PC's on the network on the laptop itself and thus get an error:
  "\\(PC Name) is not accessible." You might not have permission to use this network resource. Contact the administrator of this server know if you have access permission. The specified network provider is not valid.

  2. When you make the file sharing Wizard, I get an error "your folder cannot be shared" and the only option is to click on 'Done '.

  I'm trying to share folders to another laptop that works with 64-bit Windows 8 but I think there must be a problem with the Windows 7 laptop. I can share and access all the folders of any laptop before.

  Thank you! Any useful response will be greatly appreciated.

  Hello Sevi,

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems to access the specified network.

  But, I would like to know some information related to this topic to help you better.

  (1) is connected to a domain of the computer network?

  (2) is your computer connected to the homegroup?

  (3) have you been able to access the specified network previously.

  In the meantime, please follow the suggestions mentioned by Fazil M on May 15, 2012 and check if this is useful.

  Error "\\computername\f is not accessible.  You might not have permission to use this network resource"when accessing to Windows XP computer via a working group

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/error-computernamef-is-not-accessible-you-might/a8db7f8c-6a7b-462D-B7F5-48707ae6b1f8

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• niRFSG Initialize.vi error: AWG resource name is not valid

  Hello

  I use an SMU-5442 arbitrary signal generator and a PXI RF Upconverter - 5610. The RF PXI-5610 converter is PXI1Slot5 inside the MAX and the SMU-5442 AWG is PXI1Slot7.

  When I gohttp://ftp.ni.com/pub/devzone/epd/rfsg-generate-fm.vi of http://zone.ni.com/devzone/cda/epd/p/id/5620 , I get the error messages.

  For the resource name = PXI1Slot5

  code-1074117675
  
  niRFSG Initialize.vi a session cannot be created because the resource AWG name is not valid. Specifty the resource name of AWG Max by right clicking on the converter, and then select Properties. If you specify the working group through the chain of the Option, make sure that the resource name of AWG is valid.

  For the resource name = PXI1Slot7

  code-1074117636
  
  niRFSG Initialize.vi the specified device is not supported by this driver.

  which is correct, because PXI1Slot7 is the GTA and the VI is just using the niRFSG screws

  When I use a selector instead of the string of the Option, I can only choose the RF PXI - 5610 Upconverter is PXI1Slot5, but I still get the same error message.

  A you link them in MAX? In other words, the converter and the working group.

• The specified account name is not valid, because account names cannot contain the following characters * {} [] +=? *

  Original title: can't do user account
  I can't do a different account on my windows vista computer.  When I try to make another account, it says this "the specified account name is not valid, because account names cannot contain the following characters * {} [] +=?" "*" even if I don't use any of those what should I do?

  the only account on my computer is a guest account, it's a story of administering it. This is - why it doesn't let me make a new account? had this problem for 2 years

  Hello

  Try these steps to create a new account:
  a. log on under an account that has administrator privileges.
  b. Click Start.
  c. type the three letters cmd in the search box.
  d. press Ctrl + Shift + Enter
  e. click "Run as Administrator".
  f. type the following commands and press ENTER after each one:
  net users
  NET user 'Jack' xxyyzz / add
  net localgroup administrators/add ' Jack'

  The first command displays all existing account names.
  The second command creates an account named 'Jack' with a password of "xxyyzz".
  The third command will make Jack administrator.
  
  Check the link for more help:
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

• REF InsertedVI of high school still not valid when using VI Server

  I'm trying to access subpanel controls (in an executable file) via the server of VI, but he doesn't seem to be allowing me to get a valid reference to the inserted VI (1026: VI reference is invalid).  If I use the same code in the executable itself, it works fine.

  The executable file and the VI that I use to try to get a reference to the Secondary VI is attached.

  Any ideas why this happens?

  OK, I see the problem, VI references are local to the instance of LabVIEW that generate them. When you read the VI reference, you get the correct numeric value (as evidenced by the fact that it is zero). However, in the development environment from which you access the executable, the reference is not valid. This reference is only valid in the environment of the executable. What you need to do in the executable is to get the name of the VI in high school, when you insert it and store that name in a FGV. Then from your remote application, read this FGV - and you will have the name of VI.

  Mike...

• Task Scheduler error: "an error has occurred for task reminders - portable home. "Error message: the specified account name is not valid.

  HelloW everyone,

  I changed my name to the laptop and now every time I have lunch Planner task, I receive the following error message:

  "An error has occurred for task reminders - portable home. "Error message: the specified account name is not valid.

  I also have the problem with restore points, so these two issues relate to eachother? How can I solve the problem of the user name.

  Any suggestion and help appreciated

  Hello

  You can check out the link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/odd-Scheduler-error-messages/a487d70b-61c9-499F-ae15-ac903d6174eb

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• the specified account name is not valid

  When you try to configure a task in Vista Task Scheduler I receive the following error message after you configure all the parameters of the task: "is an error generated for task reminders - Desk Checkout (it's a username on the system, but not one that I'm logged in." (C'est aussi un nom d'utilisateur valide qui vous permet d'ouvrir une session sous) the specified account name is not valid.

  Hi JimErickson

  1. is the computer connected to a domain?
  2 have you tried to use the Task Scheduler in another account?
  3 have you tried to schedule the task through an administrator account?

  It seems that the account you are using doesn't have the rights to schedule the task.

  Let us know the answers to help you best.

• Windows 7 Ultimate 64 k product key not valid after more than a year of use

  Initially, I bought a Windows 7 Ultimate 64 upgrade as a student version. My computer originally had Windows 98. ten years later my hard drive died, and I learned that you cannot reinstall a version upgrade. (beware of the free windows 10 UPGRADE). I bought a product key of the online Microsoft Store over one year in January of 2015. I have finally is broken down and bought the key because I was advised if I never had to do a Setup again that buying a key meant I could without any other expenditure. It seems to work fine until I recently got a message saying that my copy of Windows 7 Ultimate 64 is not valid. I called the Microsoft store and they claimed to have no trace that I already bought the product key from their part. After a few unsuccessful attempts to locate the original mail, finally, I scored. I received an email from a Laura McBride in the Microsoft Online store, with a product key and a link to a file in Dropbox. So I tried to do a repair and reinstall by using the information in the email. The Dropbox file will not download to my Dropbox, it said its too big. It will not download to my computer as it says that the .zip is too large. I'm reaching here. What can I do next?

  No third party or Microsoft Partner are allowed to sell product keys.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• BES10: Entry-Point-Name in the file descriptor META-INF/MANIFEST. MF is not valid

  Hello

  We have a Headless, built using 10.3 SDK Blackberry app. It has two parts. User interface and service without a head. We are able to package, sign (using the certificate of the company) and test it on BB 10 devices. Up to now, we use chrome extension 10 BB playbook/App manager to install the application on the device, but today when I tried to publish the App via our system's internal BES10 I get following error.

  • The "Entry-Point-Name" attribute with the value 'Background to the ExampleApplication Service' in the file descriptor META-INF/MANIFEST. MF is not valid.

  It seems that BES10 Server loved point of entry for background service but don't know why? It works fine when download us it via the chrome extension 10 BB playbook/App manager. Attaching sanitize bar - descriptor.xml for reference.

  Yes, it seems that there are limitations on the maximum length of the name of the application when published by BES (25 characters). Strangely affecting 'Point-name entry' to less then 25 characters solves the problem.

• [Build ripple failed] The resource name is not valid

  Hello guys,.

  I have problems with my application using ripple of packaging. It continues to produce [Oh Snap! [Build request failed with the message: invalid application [ERROR] (Archives) - name of the resource are not valid (img/[email protected])] error.

  I'm guessing a reoccurrence of an old bug as tneil well said in this post , so I used the latest version of the SDK (BlackBerry WebWorks SDK 2.2.0.15), but the error persists.

  Please note that I used Ripple many times before with the "-" on the names of file deleted on my mind, which is probably the reason why I've not encountered this earlier but it's just that I'm importing pre-made images with strict naming conventions (with a "-") so I can't go and rename them.

  Here is a screenshot of ripple.

  

  Any help would be appreciated.

  There are special characters that are not supported in the names of embedded resources for an application running on the BlackBerry Smartphone platform.

  I think that is one of these characters not supported

• Error when applying for invalid package (archive) - the resource name is not valid

  I am trying to package a WebWorks on a Mac html application. I have installed ripple but packing doesn't seem to be an option in the menu of the ripple.

  When I try to run the program from the Terminal of the error:

  Invalid application - archive the resource name is not valid(__MACOSX/._twitter.png)

  Twitter.PNG is the name of an image file referring to a link in my html file. What is the problem with this name?

  It seems that the png file must be referenced in the configuration file.