Experts on appeal: the advanced user permissions

Similar Questions

• Determine the specific user permissions for a script

  With a bit of advice from LucD (thanks!), I finished a script simple last night that removes the clones, defines the network cards, takes snapshots, etc to automate a procurement process.

  Initially, I was running the script as a user with limited permissions but frustrating after a few hours, I found that I couldn't see some objects with this user.  I tried (briefly) extend the privileges on the role of the user has been assigned, but I couldn't get the right combination and finally gave up and executed the script as an administrator and it worked.

  I hope that someone will be there to tell me there is a quick and easy to run a Profiler against a script (or look at the server logs) which lists the specific permissions are required when running a script?  I suspect that would save a lot of time on trying to figure out which of the hundreds of privileges must be defined for the user running the script.  If not, I'm going to nuclear dawn somewhat undesirable to administrator.

  Any ideas?  Thank you all!

  The best source for starters is required for routine privileges.

  But take care of is not to create too many roles in your environment.

  For a presentation full privileges (with a short description), you can do

  $authMgr = Get-View AuthorizationManager
  
  $authMgr.Description.Privilege |Select Key,Summary
  

• Verification of the VCenter user permissions

  Hello

  Is there anyway to audit the addition/removal of permissions in VirtualCenter. You can see in the event log when a user connects, but nothing seems to be recorded when an admin edits / adds permissions to another user.

  Is this possible?

  Hi Mick,

  You can take a look at the following document. It gives a lot of interesting details about the events, you can take and respond in specific permissions.

  It will be useful. Good luck.

  Concerning

  Franck

• The advanced user interface question

  Hello!

  I need to make the user interface for my application as an application Blackberry menu. I want to show 9 buttons on the screen (3 ranks a 3 columns). Like this:

  [1]   [2]   [3]

  [4]   [5]   [6]

  [7]   [8]   [9]

  I did it this way: I add 3 HorizontalFieldManagers to the screen and each of them has 3 buttons. Now, it looks like I need, but I have problem with fucus moving. If I test on the device with trackwhil, it works fine. But on devices with trackpad it doesn't work because I need. For example, if I chose the [7] button and press upward, then focus to key [6]. But I need to move the focus to the button [4].

  Maybe it is not best solution... Any body has the same interface? How it worked correctly?

  Thank you!

  You can use GridFieldManager (or TableLayoutManager for OS< 5.0)="" instead="" of="" your="" collection="" of="" horizontalfieldmanagers.="" i'm="" pretty="" sure="" they="" work="" with="" touchpad="" the="" way="" you="" need.="" never="" tried="" or="" heard="" anything="" about="" their="" functionality="" with="" trackwheel,="">

• Rights of the advanced user and 500 users of my PDF form

  I own Acrobat Pro and Livecycle Designer ES. I did interactive pdf form, and I would like to sell it to my client. My client wants to put in intertet for his client. I guess that's more than 500 responses in one year. They will collect data and send by e-mail or by post to him.

  What should I do to do it legally (I would save locally)?

  See this policy statement. The restriction of the EULA refers to the creator of the document (and Acrobat license holder) receptor responses of the document distributed - therefore if none of the above are already received, it has not been violated. It is impossible to control of the copies of a handout once (legally) and then who else ends up with a copy, and what they do with it, is of no interest. The only person affected by this EULA is one who accepted it when they installed their personal copy of Acrobat.

  If the limit applied to those who receive the file, no one would never be able to make a document Reader extended on a public Web site.

• NB100 - need help with Toshiba Eco Utility to advanced user

  I want to ask the advanced user (knowing regedit, windows services and processes) and Eco Utility installed to help me with Toshiba Eco Utility.

  (1) I need the registry branch where Eco Utility to store preferences.
  (2) screenshot for TecoService services. With params.
  (3) screen capture of process. Looking for TPCMpwr.exe it

  Why I need?
  I have Toshiba NB100 netbook where Toshiba has not released Eco Utility.
  NB200 there, but not for NB100.
  I don't know why... It will work, only I need the registry and services information.

  P.S. If Toshiba engineers will read this post.
  Why Toshiba release Eco Utility for NB100?

  Hi Lrrrr,

  Just a simple question: what installation Eco Utility on your NB100?

  But normally you don't need this utility of Eco. As much I know this tool only changes power settings Windows you can do it yourself too. It s a nice tool where you can reduce the energy consumption in a single click, but you can do it yourself if you create the own power profile or change.

• Windows 7. But the name of the account user each time before fully loading windows. How can I stop this and simply load in thank you Windows.

  I have just upgraded to Windows 7. But whenever I turn on my computer, he wants to support me on my user account name before completely loading windows. How can I stop this and simply load in thank you Windows.

  Hi UKuser7,

  Welcome to Microsoft Answers Forum.

  Automatic logon is disabled in Windows 7 by default for security reasons. If it is enabled, anyone who can physically access the computer can also gain access to everything on the computer, including the networks that it is connected.

  This setting is only recommended for cases where the computer is physically secure.

  To set up Windows 7 to connect to the desktop automatically, follow the steps below.

  1) click Start , and then enter the following command in the start search box:

  Netplwiz

  2) press ENTER.

  This opens the Advanced user accounts Control Panel window.

  (3) in the users tab, uncheck the box next to users must enter a user name and password to use this computer.

  4) click apply at the bottom of the user accounts window.

  (5) when the newspaper automatically on the dialog box appears, enter the user name for which you want to automatically connect to Windows 7. Then enter your password in the two areas where it is requested.

  6) click on the OK button.

  7) click OK in the window user accounts to complete the process.

  Thereafter, your PC at startup, Windows 7 will be automatically connect.

  Ticket back for your comments and concerns.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• When you try to use the repair your computer from the advanced boot option option, it only shows a different user account and my username and password does not work

  Original title: when you try to use the repair your computer from the advanced boot option option

  When you try to use the repair your computer from the menu option options advanced startup, when it comes to the screen to select the user account it shows only a "another" user account and my username and password does not work, and the 'OTHER' this account is not on my list of user accounts... what should I do?

  Hi kennympeek,

  1. why you try to do the Startup Repair?

  You can try to perform the commissioning of repair using the audit and the disk Installation of Windows Vista.

  For estelle information links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope this information is useful.

• Lightroom CC "User permissions error" - cannot change the permissions for the folder Preferences

  I noticed that Lightroom was running slow so I thought it was time to take stock. (I was using Lightroom 5.7). Yesterday, I downloaded the last LR update, which is Lightroom CC [1067055]. I thought that Lightroom CC would replace 5 Lightroom but apparently they have downloaded as separate applications. When I tried to launch Lightroom CC I got an error message indicating "Lightroom has met permission issues. I followed the directions from this link met Lightroom user permissions problems. Bridge of Photoshop Lightroom crashes or hangs at the launch but it does not set itself (I did not take the final step which is - create a new user account). I was working off of Yosemite, so I hope that the error can be corrected if I updated my operating system. Today, I downloaded El Capitan and Lightroom CC will not always open - I get the same error. I went to manually update the read and write permissions for the folders listed, but some of them don't make changes. The preferences file gives me an error saying "the operation cannot be performed because you don't have the necessary authorization." I don't have the "Adobe" folder in this route Caches

  • /Users/ [user name] / Library/Caches/Adobe /.

  How can I solve this problem and get Lightroom CC to work?

  

  @laurawielos,

  Try this:

  the Macintosh HD > users > [your user folder... click on 'Go' on the options bar at the top on the desktop (Menu bar) > then click on the 'option' key > mouse down to the selection of 'Library' that should appear > click on it to open the folder /Users/ [your user name] /Library/ ' "]

  You should now find the appropriate folders to change permissions. Just give your user name of the read/write permissions. I don't think you want to give everyone the read/write permission as some authors have claimed.

• I did an update for LR6.  After installation, I can't open LR6.  A message indicates the user permissions issues.

  I did an update for LR6.  After installation, I can't open LR6.  A message indicates the user permissions issues.

  See answer #7 in this thread: Re: update on CC (for PS, LR and bridge) online and met a permissions problem with LR on three dossiers?

• Hello, how get the permit numbers on site licenses (LWS), the identification number of the end user, nothing happens. Thank you

  Hello, how get the permit numbers on site licenses (LWS), the identification number of the end user, nothing happens. Thank you

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Displays the value of the variable user based on the advanced run-time action

  Captivate 8.0.1.242 - Windows 7 64 bit

  I need to display the total duration of the captivate file in a text caption. To do this, after a bit of googling, discovered this total = cpInfoFrameCount/cpInfoFPS. I created a user variable called 'v_totalTime' and in stocks advanced created a standard action called 'totalTime' and added a phrase v_totalTime = cpInfoFrameCount/cpInfoFPS.

  Now the weird part is, I don't know how this user variable appears as text. In the text of the legend, when I hit $$ v_totalTime$ $ and overview slides in captivate, the value is not displayed. So I think, the advanced action is not get triggered. So how to get this working?

  Even the blog posts that are older than 4 years still not seen at this time.

  Every action has to be triggered by an event: events / Actions (Advanced) - Captivate blog

  In this case, you can use the event to enter for each slide. This means that the value of v_TotalTime will be refreshed only at the beginning of the slide.

  Another tip: type a variable in a text (shape or legend) container ever but still use the X button in the composition of the Panel properties, tab Style role. This will prevent any typos (variables are case-sensitive) and you can also change the default length that will be used to display the variable.

• My Vista Home Premium advanced login is no longer in the c:\users\TNT

  I use my admin account with a password for a while and am tired of using the password so I removed the password. Now when I log in, I get the directories to C:\Windows\System32\config\systemprofile instead of c:\users\TNT.

  When I look at my windows Explorer, the top folders list under Desktop: TNT shows both sets of places, but the display office is evil.

  How can I get this connection to point to c:\users\TNT?

  Hello
   
  Create the new user account and check if it solves the difficulty of the corrupted user profile issue.
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
   
  If the problem does not occur in the new account user set your user account corrupted. The steps to fix the corrupt user account is given below.
  Fix a corrupted user profile.
  http://Windows.Microsoft.com/en-in/Windows7/fix-a-corrupted-user-profile
   
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Administrator permissions denied on the single user's computer

  I am the administrator and use only my computer and yet I still get error messages saying that I have not allowed to save in a specific folder that I just created. I want to download a program to a subfolder that I created in the folder "programs (x 86). When I try to save it, I get a message that I don't have permission and to contact the administrator. The problem is that I am the administrator and the only user of my computer. When I connect my username says administrator.

  More generally, I want to do what I want with my boring computer without restrictions. How can I receive fully the right to save the files, how and where I want to?

  The question that irritates you is called UAC (User Access Control). Click Start / Help, then search for help on UAC to see what it is, how to disable and what are the implications.

  See also here: http://support.microsoft.com/kb/951016/

• Obligation to fill the values in table advanced according to the selection of a value in another article of lov (not in the advanced table)

  Hi all

  We work in a custom oaf page subdivision. We have an obligation to fill the values in table advanced based on a value selection in an element of the lov (this LOV is not in the advanced table) .can share you it please me steps or examples of code to achieve this. Waiting for response.

  Kind regards

  I do not understand completely still. What do you mean by "default in the table values must be inserted".

  You can create a dummy VO with the same columns and fix the VO in the advanced table.

  In the normal scenario, when the user clicks on submit button, browse this VO, and copy the values to the validation according to VO and appeal EO. If values gets inserted into the database.

  When the user selects the number of PO, simply run the other VO and fill this dummy VO so that values are available in the advanced table. When you click on send, do not copy these values to the EO based VO, so these lines won't get inserted.

  It work?

  See you soon

  AJ