Channels and PIN messages?

Similar Questions

• using PIN messages to send the query and return data

  I am working on an app that will send a request to another blackberry and return the data all via PIN messages. There is a user interface where the user selects the contact and start the PIN message with the request. There is a background application that listens to these requests. When we arrive, he must inform the user and allow them to send the requested data or reject the request. If they choose to send, it will undertake a PIN to the sender with the requested data, which will then be returned to the screen. Is it possible by using PIN messages, and if so, can I prevent their display in the list of messages?

  You * can * remove PIN of the Inbox messages. For all purposes useful, this is just a specific instance of an ELECTRONIC message.

• Find channels and cDAQ modules

  I have looked around the previous messages, but can't seem to find what I'm looking for.

  In most of my experience, I've implemented some DAQ and once the modules and channels are all in place, which is where they stay forever.

  Since I know things will not move, I create tasks in DAQmx.

  I'm working currently on a new installation program, but the problem is that in things cDAQ will not be in the same place every time.

  The application must read a number of strain gauges, which will be connected to the NI 9235 modules.

  It will take place anywhere from 1 to 3 modules attached, and they can be in one of the 8 available cDAQ chassis slots 9172.

  In addition, within a given module, anywhere from 1 to 8 channels will be connected.

  So basically, I guess my questions are running:

  (1) how many modules are connected and where?

  (2) in each module, the number of channels is turned on and how much is empty.

  From there on, I use DAQmx palette to take care of things.

  Thank you!

  So with every new start of the program, you will have a known device (your strain gauge device), but unknown channels. Here's how I attacked only a few years ago...

  • DAQmx create a task to create a job.
  
  
  • Make a constant table of all known possible channels. Say that it is 8 cells and compare that to an array of channels USED, making false tracks off the chains 'Unused' and the names of real channel out of used ones. Under certain conditions to check which ones which is used to remove the appropriate channel and add the DAQmx virtual channels properly. The VI snapshot below goes into the details. I brought not only the channels, channels, such as min/max properties and bridge information. My VI also made bridge removal, under certain conditions, depending on sensor that the user wanted to null (that part is not shown.)

  This code isn't super sleek, but I hope this gives you the ideas come from.

  

• PIN messages

  Hello

  I'm Stephen Baker, an employee at CAS Corp., based in Oakville (Ontario).

  We provide a hosted emergency notification service, and we would like to include e-mail PIN in the list of communication options.

  The push API will allow the sending of PIN messages?  If not, what are our options?

  Stephen E. Baker

  Applications architect

  SAE Corporation

  The Service of Push BlackBerry allows you to push messages to a custom application, installed on a BlackBerry Smartphone.  It does not support the PIN messaging.

  However, what you describe is possible, but requires a BlackBerry Smartphone.  You may have a front end application (on a web server or where ever) who accepts the PIN of the destination user, the subject and the message of BlackBerry.  This application can communicate with a custom application running on a BlackBerry Smartphone to your environment, which could send the PIN message to the destination user.

• Target of call for the PIN message (part of context menu)

  Hey. Here's a descriptor extracted bar that works with the context menu of email for sharing. How could it be changed to alow to work with PIN messages? So I want the user to bring up the context menu, select my app (a share point) and then I get the PIN and the PIN message subject. And it works with emails as before. Appreciate the help,

  See you soon

  Justin D.

      
          Alert for Reply
          
              icon.png
          
          card.previewer
          NotifyEmailReply
          
              bb.action.SHARE
              message/rfc822
              
          
      
  

  You will not be able to do it with the PIN messages as you can with e-mail.  Reception of invocation of sharing with the PIN messages is not supported.

• INVALID_PARAMETER when PIN message sending

  Hello.

  I am trying to send a PIN message to a user via c#.  Here is my code:

  UserMessage message = new UserMessage();

  message. Subject = messageSubject;

  message. Body = messageBody;

  DispatcherMessageTypeEnum messageType = new DispatcherMessageTypeEnum();

  messageType.@enum = DispatcherMessageTypeEnumType.PIN;

  messageType.enumSpecified = true;

  sendMessageToUser request = new sendMessageToUser();

  request.userId = basServiceResultAttributes.userId;

  Request.message = message;

  response2 sendMessageToUserResponse = coreWebService.sendMessageToUser (request);

  Result SendMessageToUserResult = response2.returnValue;

  Console.WriteLine ("msg PIN status:" + result.sendMessageToUserReturnStatus.code);

  Seems simple enough, but I just get an invalid_parameter error.

  The message subject and body are plain text and the user name is correct.

  Can you see what I'm missing?

  Found the problem.

  Nothing has been done with messageType.  I just needed to add this line:

  request.messageTypeEnum = messageType;

  Now, it works fine.

• BlackBerry Blackberry Z10 protect and PIN issues

  Hello

  I recently lost my Z10 at the time I arrived at a computer to try to locate, it seemed that the battery had been taken out of it. I have a few questions however on blackberry protect and PIN.

  So my first question is, if the phone is deleted (I didn't erase my phone using blackberry protect because I don't know the answer to this question) my blackberry protect service be wiped from the phone as well?

  My next question is PINS more still Z10 accompany the material they come up with? I want to know that if my friends and I try to add the PIN code, it'll still be a valid PIN / work. I hope that if I am able to show someone the phone and uses it, I'll be able to get the police to work with the service provider in the phone tracking to the bottom/blacklist it. I realize that on past generations of BB PIN was closer, but I read a few other places that there is a way to eliminate even the pine TREES. I wonder if it is true and also if Z10 are less permanent?

  Any help would be appreciated, I usually try to go through something to bring the person who took my life more difficult for phones. It is essentially the only thing I can do to make me feel better about the situation.

  Also on a side note: in blackberry protect, under manage devices, the State of my still active said Z10. But I can't locate, view messages or make it ring.

  Thank you advance to anyone who takes the time to answer!

  Hello again,

  I decided to do a little investigation when my curve 9320 I was using before I get my Z10. I supported it upward and wiping it on entering the password wrong 10 times. Then I tried to locate once he dried, turned on and connected to my network. No luck once the phone has been cleared, I couldn't follow it or get in touch with her anyway to protect. I guess that my once I've left is now trying to keep a trace on the PIN...

  Pretty disappointed that protect no longer works when the phone is deleted. I was hoping she could be removed only by connecting to your blackberry ID on the phone or the computer to remove it.

• FolderType the received PIN messages?

  Anyone know what is the FolderType of PIN messages?

  Also, when did a message is stored in FolderType "Classified" and "Uncategorized".

  Help, please

  PIN messages are stored in a folder with a type of Folder.INBOX.  It filed messages exist in one folder other than Inbox, project or sent.  Messages not classified to not have a folder that was.

• Listening to a PIN Message

  Hello.

  I have an application that is tuned to PIN messages.  I got this by checking the type of the message to see if it is equal to Message.PIN.  However, it doesn't seem to work.  The pin message is picked up as a regular e-mail message.  The message type is equal to Message.EMAIL_MESSAGE. I had read another post, indicating that this feature was broken in OS 4.5

  I use 4.7, but it always seems to be broken. Anyone has an idea on how to distinguish the pin messages regular e-mail messages.

  I even tried to see if the address is an instance of PinAddress, which did not work.

  Thank you

  This issue is still in BlackBerry handheld software version 4.7.0.  You can view the contents of the address.  The format of a PIN and email address are different (check the presence of the symbol @).

• VG224 and Verifone xx810 chip and pin component terminal modem

  Hi members of the community.

  I have a very specific problem I'd appreciate help with if anyone else has experienced this or something similar.

  We have a VG224 that provides analog lines for fax machines mainly on our campus. Recently, we had our Department of finance use machines to chip and PIN on these connections. Previously, we used streamline machinery, and they connect properly.

  The specific case I have is a Verifone vx810 machine which is connected to a VG224. The Verifone unitis able to deal with success and to authorize a transaction, but it cannot complete a download batch process or a TMS. I talked to the support company that rent us machines to and identified that the computer uses the following baud rate, bits of parity and stop for 2 different operations:

  For transactions: 2400 baud, parity/stop 7e1 (this works)

  For the batch upload/TMS: 19200 baud, parity/top 8n1 (it does not).

  In the case of the upload of batch/TMS, the machine connects, gets a connection to the remote end to the PSTN for about 10 to 20 seconds, then he tears because the modem negotiation fails. I've read various articles on forums CIHI and others say that data rates high speed can be a problem for the VG224, but nothing to suggest a problem with 19200. I also tried installing on an ATA186 and ATA showed the same symptoms, so I am inclined to think that this isn't just a firmware issue or bug with the VG224. I tried 3 different chip and PIN machines of the model vx810 and all have the same symptoms.

  Here's a copy of my current VG224 config. The VG224 is recorded in the CUCM via SCCP.

  version 12.4

  no service button

  horodateurs service debug datetime localtime

  Log service timestamps datetime localtime

  no password encryption service

  !

  hostname vg224

  !

  boot-start-marker

  boot-end-marker

  !

  forest-meter operation of syslog messages

  logging buffered 4096

  !

  AAA new-model

  !

  !

  AAA authentication login default local radius group

  the AAA authentication enable default

  AAA authorization exec default local radius group

  failure to exec AAA accounting

  action-type market / stop

  RADIUS group

  !

  !

  !

  AAA - the id of the joint session

  clock timezone GMT 0

  clock summer-time recurring UTC 4 Sun Mar 01:00 4 Sun Oct 02:00

  IP source-route

  IP cef

  no ip domain search

  !

  !

  No ipv6 cef

  !

  stcapp ccm-Group 1

  stcapp

  !

  stcapp function-access code

  !

  stcapp speed dial feature

  !

  !

  voip phone service

  Modem passthrough codec g711ulaw nse

  !

  !

  voice-card 0

  !

  username password

  Archives

  The config log

  hidekeys

  !

  !

  !

  interface FastEthernet0/0

  no ip address

  automatic duplex

  automatic speed

  !

  interface FastEthernet0/0.644

  encapsulation dot1Q 644

  IP 10.1.160.4 255.255.255.0

  !

  interface FastEthernet0/1

  no ip address

  Shutdown

  automatic duplex

  automatic speed

  !

  default IP gateway - 10.1.160.1

  !

  IP forward-Protocol ND

  IP route 0.0.0.0 0.0.0.0 10.1.160.1

  no ip address of the http server

  !

  exploitation forest installation local6

  interface FastEthernet0/0.644 source journaling

  logging

  SNMP-server RO community

  SNMP server location

  !

  Server RADIUS auth-port 1812 1813 acct-port host

  Server RADIUS auth-port 1812 1813 acct-port host

  RADIUS 3 server timeout

  RADIUS server key

  !

  control plan

  !

  !

  !

  voice-port 2/0

  cptone GB

  initial delays of 60

  timeouts interdigit 60

  timeout infinity ringtone

  activation of the caller ID

  !

  voice-port 2/1

  cptone GB

  initial delays of 60

  timeouts interdigit 60

  timeout infinity ringtone

  activation of the caller ID

  !

  voice-port 2/2

  cptone GB

  initial delays of 60

  timeouts interdigit 60

  timeout infinity ringtone

  activation of the caller ID

  !

  voice-port 2/3

  cptone GB

  initial delays of 60

  timeouts interdigit 60

  timeout infinity ringtone

  activation of the caller ID

  !

  voice-port 2/4

  no echo - cancel enable

  cptone GB

  initial delays of 60

  timeouts interdigit 60

  timeout infinity ringtone

  activation of the caller ID

  !

  !

  CCM-manager cisco Protocol fax

  CCM-Manager config server

  CCM-Manager config

  CCM-Manager local FastEthernet0/0.644 SCCP

  CCM-Manager sccp

  !

  !

  SCCP local FastEthernet0/0.644

  SCCP ccm version ID 1 6.0

  SCCP ccm 2 identifier version 6.0

  SCCP ccm identifier 3 version 6.0

  SCCP

  !

  SCCP ccm Group 1

  associate the ccm 1 priority 1

  associate priority 2 CCM 2

  associate the ccm 3 priority 3

  !

  transcode dspfarm profile 1

  associate the PCRS application

  !

  !

  voice pots Dial-peer 999200

  Service stcapp

  port 2/0

  !

  voice pots Dial-peer 999201

  Service stcapp

  port 2/1

  !

  voice pots Dial-peer 999202

  Service stcapp

  port 2/2

  !

  voice pots Dial-peer 999203

  Service stcapp

  2/3 port

  !

  voice pots Dial-peer 999204

  Service stcapp

  port 2/4

  !

  !

  !

  Line con 0

  line to 0

  line vty 0 4

  !

  NTP server

  NTP server

  end

  And a version of the show of the vg224:

  System to regain the power ROM

  System restarted at 14:30:34 CEST Wednesday 9 may 2012

  System image file is "slot0:vg224 - i6s - mz.124 - 22.T5.bin".

  Cisco VG224 processor (R527x) (revision 4.1) with 119808 K/K 11264 bytes of memory.

  Card processor ID FHK1432F2CC

  R527x CPU at 225 MHz, 40, Rev 3.1 implementation

  1 voice module 24 analog FXS edge V2.1

  2 FastEthernet interfaces

  Configuration of DRAM is 64 bits wide with disabled parity.

  63K bytes of non-volatile configuration memory.

  The system of fpga version is 250027

  The system of readonly fpga version is 250027

  Option for fpga system is 'system '.

  62496K bytes of ATA Slot0 CompactFlash (read/write)

  Configuration register is 0 x 2102

  This problem is really driving me crazy, if anyone can shed some light on what is perhaps the root cause of that I would be very grateful.

  I would say probably yes, devices compatible PCIDSS circulating on the network IP would be the way to go and that is something that we work, but currently we have units that can communicate using analog telephone lines.

  OK, PRI is clean so you must relay setup for connection of modem modem high speed work.

  I would not waste time with CSPC and go immediately to SIP or H.323.

• Is it possible to invoke the mail app to send a pin message?

  Hello. I need to invoke the e-mail application to allow the user to send a pin message. Currently, it seems that you can only do for sms and emails.
  Is there a way to put a flag or something saying the BONES it's a pin message?

  Thanks in advance.

  If you send the message to a PINAddress, rather than an address, a PIN message.

  See the documentation for the API for PINAddress.

  Code looks like this:

      try {
          pinReplyTo[0] = new PINAddress(pin,name);
          newMessage.addRecipients(Message.RecipientType.TO,pinReplyTo);
      }
      catch (Exception e){
           System.out.println(e);
      }
  

• PIN message?

  Hi all

  I am trying to send the message of pine with Transport.send (). but not deleivered to the message recipient device. Can someone tell me who - is - it possible to send the message of pine by programming? If yes then please tell me howi can send pin messages

  Thanks in advance

  I ran into this also.

  Message.Reply () is broken in many ways: one of these questions is that a reply() a pine tree creates an email, rather than a PIN message.

  The workaround is to create your own empty PIM message, and then copy the information you need from the original message.

• How to check the possibility to send the PIN message?

  Hello

  Is it possible to verify that a device is able to send a PIN message without sending the message to the PIN and check its status? I cover all possible cases, such as devices with WIFI and without, company activated devices and is not active and etc., devices with antenna radio off the coast.

  Best regards.

  I think you need to BIS to send PIN messages.

  If this is the case, you can use CoverageInfo to check for this.

• Simulating PIN message

  I would like to make use of PIN of mail in my application and I have the following questions... That will be great if someone can help me...

  1. I want to send messages between simulators. How is that possible?

  2. I need two or more blackberry Simulator to test... How can I have two or more Simulator running at the same time...

  3. If several instances of Simulator run, can we simulate PIN message between this instance?

  Thanks in advance...

  After a comprehensive analysis, I understand that the PIN messages cannot be simulated Simulator.

  But it works very well in the unit.

• T420 and Winodws 7 Bitlocker with TPM and PIN

  Hello

  I had a few T420 ThinkPad and you want to use Windows 7 bitlocker, TPM and PIN code.

  The problem is, after the reboot to test the PIN code, I always get the message that the PIN is incorrect, and I have to restore with recovery key. After that Windows tells me I should use a PIN with numbers.

  But my goal is to use a ROD with numbers, special characters...

  For example, a PIN with only numbers work.

  Netscape,

  It works for me with American keyboard.  So I was wondering if there is a problem with the German keyboard.

  http://TechNet.Microsoft.com/en-us/library/ee449438 (WS.10) .aspx

  «We recommend that users set their EN-US keyboard when the PIN entry reinforced to avoid entry failures PIN in the pre-start-up environment.» If you are unable to enter a PIN improved since your keyboard even after affecting the US keyboard layout, you must use a digital-only PIN. »