Expirations of OS heartbeat during the test and effective recovery

Similar Questions

• It is possible to switch between mode 'file separate globals' to 'share the same globals file mode' during the test run.

  Hi all

  It is possible to switch between mode 'file separate globals' to 'share the same globals file mode' during the test run.

  Or there is another option to use variables separated and shared at the same time for 2 parallel Sockets (ParallelModel.seq).

  Thank you

  Thank you

  I think it's useful!

• Why the total time required for the test sequence is different during the test runs

  Hello

  -J' have different test resources to test our product which includes engines and the NOR-Box (6351).

  -Number of test files in sequence that are called during the test (ca. 20)

  -The problem is that when I run these test sequence files separate (say only 3 out of 20), total time by these tests are t1, t2 and t3, but when - I left all 20 tests to run without jumping all the time needed by the 3 tests above is t1 + 60 s, t2 + 80 s and t3 + 50sec. Why it is so and how can I avoid this problem.

  -The tests are motors to move, take samples or box then save them on my computer after testing the limits. Since they are time critical, when I do all the running tests in a test go a lot do not PASS. I can't run them separately because it takes more time, more interference by user and also more than one report that is not desired.

  -J' tried unloading after execution steps, but it did not help.

  Kind regards

  RB

  This probably depends on that made your sequence. Have you tried shrink where extra time is being spent? You can time how long different parts of your sequence are following the steps of the expression as follows:

  Locals.StartTime = Seconds()

  Locals.ElapsedTime = Seconds() - Locals.starttime

  You can also watch time module in your reports. There is nothing specific on TestStand that should cause some sort of slow down like this. I recommend trying to figure out where the extra time is being spent. I suspect once you do, the cause will become obvious.

  -Doug

• During the installation and activation of google chrome, I lost my taskbar

  Original title: Google Chrome

  during the installation and activation of google chrome, I lost my taskbar. How can I reinstall my taskbar?

  Hi Frank,.

  1. do you receive any error messages?

  2. have you restarted the computer once installed google chrome?

  3. not this problem occurs when you run a specific program or out of order?

  This problem can occur for the following reasons:

  • Auto-hide the taskbar has been selected for the taskbar and Start Menu Properties.
  • Your user account settings are corrupt.

  Method 1: Make sure that the hide option automatically is not selected for the taskbar

  To determine if the hide option automatically is not enabled for the taskbar and Start Menu properties, follow these steps:

  a. press CTRL + ESC.

  b. If the Start menu is displayed, click on the Start menu and then click Properties.

  c. click on the task bar , clear the Auto-hide the taskbar option and then click OK.

  If the problem persists, you can proceed to method 2.

  2 method: Recycle Explorer.exe

  Try to recycle Explorer.exe by opening the Task Manager (you can use Ctrl + Shift + Esc), selecting explorer.exe in the list and choosing end process.

  Now go to the file menu, choose new task and type in Explorer in the Open box. Press on enter and explore should restart itself.

  Check whether the taskbar is visible now.

  Hope this information helps. Provide more information so that we can help you.

• Black horizontal lines on the LCD screen at a specific time during the start and stop

  Hi, I am currently using a Presario CQ61 Notebook PC.  My problem, as indicated in the title, are black lines on the LCD screen, apparently when the screen is reset or enclose itself turned off during the start and stop only. From the judgment, he produced a split second her stops the hard drive, after that the screen is black. The lines and then quickly disappear. At startup, lines appear after the Windows logo has passed and the screen went from black to start loading the login screen.

  The LCD is in perfect condition, all using the PC. No line, no discoloration, etc.. Nothing extraordinary either. The problem does occur only during these two periods, specifically. I am also unable to note the lines when I'm looking directly at the screen. I have to be standing next to the PC, at an angle.

  Now, I had this PC for a considerable amount of time, however, I never paid much attention to the screen when starting upwards or stop, so this could definitely be something that the laptop has done since I bought it. I also read on similar problems, and it could be an outdated video driver or BIOS.

  I want to just make sure that it is not a major problem. Thank you all!

  Hello

  You have a few options in my opinion please try these steps can help you solve your problem.

  1) click Start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility. Under the Services tab, click to select the hide all Microsoft services check box, and then go to tap Start , click on disable all. Click apply OK restart the device.

  (2) please visit the HP website and update the Bios and graphics drivers on the unit.

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• Before doing the test and quiz have the same behavior

  I have a pre-test and a quiz.  Questions before the test and quiz questions are part of the same quiz experience.  Must be like that for technical reasons, can't just be quiz.

  Before the test

  1st quarter

  Q2

  Q3

  SCORE = A

  Quiz

  Q4

  Q6

  Q6

  = SCORE B

  Col requires pretest 2/3 and 2/3 for the quiz.

  How can I do review quiz include pre-test contiguos review and leave completely backwards and navigation in the consideration of all questions before the test and quiz in front?

  What you see is simply a limitation of what can make the current application.

  When Adobe added the feature of pre-test, it don't was NOT set up to do exactly what you are wanting.  It is not get included in the Quiz review mode.  There is nothing you can really do about it.

  My suggestion would be getting your first questions included in review Quiz (because they are all part of the same quiz) but as I have already said a few times, Captivate only sees a quiz.

  If you don't like the way it works, feel free to record an enhancement request and wait a few versions.  You can get lucky.

• I couldn't activate it because it says that my trial period has expired. I paid for the license and there is no way to use

  Since 69 days ago, I bought a dreamweaver license, I have charged me twice and I can't use it. I couldn't activate it because it says that my trial period has expired. I paid for the license, and there is no way to use or discuss with you for technical service. Within three days, they will return to load a month without being able to use the program.

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• The course does not send the results of the tests and reports system (Saba) after trial. The course remained "incomplete". What can you recommend?

  The course does not send the results of the tests and reports system (Saba) after trial. The course remained "incomplete". What can you recommend?

  Ok.  So you're screenshot compared to SCORM clouds now shows you're scoring 100% in the quiz, but your state of completion will still come out incomplete.  Then of course, your quiz notification settings not award success based on passing the test.

  Try to set your quiz the way I show this screenshot using SCORM 1.2 instead of 2004.

  

• Hi, my creative cloud libraries will not work. I get a comment to "something went wrong during the initialization" and I can't save anything in a library. what I am doing wrong?

  Hello

  my creative cloud libraries will not work.

  I get a comment to "something went wrong during the initialization" and I can't save anything in a library.

  what I am doing wrong?

  

  Hi Rachel,

  Please, try the following steps:

  • Close all applications CC
  • Complete the process monitor activity/task manager (CCLibrary).
  • Restart any application and check.

  Hope that helps!

  Kind regards

  Sheena

• Thought, I've been updated PS and ID, but download installed in place of the tests and PS and ID have gone. How can I fix it?

  Thought, I've been updated PS and ID, but download installed in place of the tests and PS and ID have gone. How can I fix it?

  If the creative cloud page is empty and apps are missing, check out these links:

  Cloud of Creative app empty opening (MAC)

  Adobe Creative Cloud desktop application could not be updated. (Error code: 2)

  If you still have problems updating, you can try to apply updates CC manually from the appropriate link below:
  WIN: updates all Adobe CC: Direct for Windows download links | ProDesignTools
  MAC: updates all Adobe CC: directly download for Mac OS links | ProDesignTools

• NavigateToURL works during the tests, but not upon publication

  Trying to create a hyperlink simply in Flash.  Works perfectly during the test.  But when I download from the net, by clicking on the link takes me to www.thirdnewhope.com/iamtnh.blogspot.com rather than just www.iamthn.blogspot.com.  I tried to change allowscriptaccess forever.  It does not either.  I'm puzzled :-(

  AS3 code:

  button_1.addEventListener (MouseEvent.CLICK, goClick);

  function goClick(evt:MouseEvent):void {}

  var url: String = " " http://www.iamtnh.blogspot.com ";

  var req:URLRequest = new URLRequest (url);

  navigateToURL (req, "_blank");

  }

  HTML code:

  < div id = "flashContent" >

  < object classid = "clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width = "560" height = "400" id = "events2013" align = "middle" > "

  < param name = "movie" value = "events2013.swf" / > "

  < param name = "quality" value = "high" / >

  < param name = "bgcolor" value = "#000000" / >

  < param name = 'play' value = 'true' / >

  < param name = "loop" value = "true" / >

  < param name = 'wmode' value = 'window' / >

  < param name = "scale" value = 'showall' / >

  < param name = "menu" value = "true" / >

  < param name = "devicefont" value = "false" / >

  < param name = "salign" value = "" / > "

  < param name = "allowScriptAccess" value = "sameDomain" / >

  <!-[if! IE] >->

  < object type = "application/x-shockwave-flash" data = "events2013.swf" width = "560" height = "400" > "

  < param name = "movie" value = "events2013.swf" / > "

  < param name = "quality" value = "high" / >

  < param name = "bgcolor" value = "#000000" / >

  < param name = 'play' value = 'true' / >

  < param name = "loop" value = "true" / >

  < param name = 'wmode' value = 'window' / >

  < param name = "scale" value = 'showall' / >

  < param name = "menu" value = "true" / >

  < param name = "devicefont" value = "false" / >

  < param name = "salign" value = "" / > "

  < param name = "allowScriptAccess" value = "sameDomain" / >

  <!-<! [endif]-->

                      <a href=" http://www.Adobe.com/go/getflash ">

                          <img src=" http://www.Adobe.com/images/shared/download_buttons/get_flash_player.gif "alt ="Get Adobe Flash player"/ > "

  < /a >

  <!-[if! IE] >->

  < / object >

  <!-<! [endif]-->

  < / object >

  < / div >

  disable your Blocker for popups.

• iPad froze during the update and may not exceed

  Has obtained the new ipad and put in place.  Went do the last software update and it froze during the update process.  Blocked at the white screen with the apple logo.  Can not pass it and past 2 hours.  Tried to restore through itunes, but get the error that I need to enter my password which I can't because I'm stuck on the white screen.

  Hey there smbirchler,

  Congratulations on your new iPad! Looks like you were updating the iOS version, the device froze, and now you can't pass the white Apple logo screen, even after you try to restore in iTunes. I know how happy I am when I get a new camera, so we'll work together on that, so you are able to enjoy your iPad mini.

  We will have you try to use the device in Recovery Mode. Take a look at this article for how to do this:

  If you are unable to update or restore your iPhone, iPad or iPod touch

  Thanks for being a part of the communities of Apple Support!

• Officejet 6310 all-in-One fainted during the printing and copying

  I have an Officejet 6310 all-in-one.  I have Windows Vista.  Yesterday, I replaced the black cartridge with HP98.  Now when I make copies or print a document, print the page gets more light and more light, about 1/3 to 1/2 through the page and very light down by a horizontal white line through the text.  I cleaned the cartridge with a damp cloth, I ran the command of cartridges clean but also align the cartridges.  I turned off the printer and unplugged and restarted again.  When I run a self-test page, especially the black line went up to 2/3 of the way, then it is empty at the top and gets darker, then the last 1/3 is fine.  The test pattern shows a few holes in the grid to black.

  I just checked the cushion under the black ink cartridge and it is saturated with ink.  I don't know that is where the problem originated.  I would be very grateful of any advice to solve this problem.

  Thank you.

  Is it a HP cartridge or a charging/reman?  It seems to be a faulty cartridge.  If it is an original HP, then check the warranty of the cartridge as shown here.

  It is unlikely that the ink that you see in the field of the service station is the issue.  The ink that you see is the result of the normal maintenance routine that the printer uses to keep the printheads from clogging.  It is normal that there is ink in this area.

• C4580 on Macbook. Print the test and scans wireless but said network host is busy when you try to print.

  I installed everything and print a wireless test page. That works, scanning the wireless work. I can see print ink wireless levels but when I try to print the screen I get

  Host "xxx.xxx.x.xxx" network is busy. retrying in 30 seconds...

  But she does not ever print. I think it's just a matter of minor adjustment that anyone has any ideas?

  The test page does not use the computer (uggh) queue service, so often works with the spooler is hung up.

  We will restore the print system:

  -Sys Prefs, Print & Fax
  -Right (Ctrl) click the box of the print queue and select Reset Printing System.
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  If this does not work, you will need to tell me which version of Mac OS X you are using and where you got the HP software.

• Sansa e280: multiple paths to the devices during the synchronization and no MUSIC file

  Feature: Sandisk Sansa e280 8G

  version: 01.02.24A

  I had a problem with my e280. A month ago, I started getting an error message during playback of my music files. The error says "Syncronize to continue music subscription" I have synced to my computer, nothing helps. Soon ALL my music files were giving me this error message. I went on the Sansa website, where I was directed to download and run the device Sansa Recovery Console. I did as instructed, and now when I join my e280, I get TWO paths of devices (E: / and F: /). I am only able to access one of them (E: /). F: / is noted as removable drive and not going anywhere. When I enter in E: / I can not find my music files. When I remove my camera, he did a restart of automatic system, as soon as the restart was successful, it updates the database for about 10 minutes. I synced the device and my computer prompted me to format the device. I formatted and I still no MUSIC file. The device has been wiped and I thought it would be best to seek professional help until I made the situation worse.

  If there is any other information needed to tell me what it is and, in the worst case scenario, how to find and I'll post it as soon as POSSIBLE. I know it's a lot of problems for a single device, but any help at all would be greatly appreciated!

  Thank you for your time,

  Dibbz

  Unless you are dealing with the Rhapsody subscription service, the error message "sync" is probably due to problems, DRM , Windows Media Player created without your knowledge. It is turned on by default in WMP, & unless you know about it from the start, you can do it yourself untold headaches.

  If you are ripping from CD to the .wma format, uncheck the option 'Copy protect' in the rip settings tab. It's the guy causing the problem. If you do not rip your own CD and downloading these songs instead, they have a DRM encryption. Try a different and/or source format. MP3 files don't have any crippling DRM.

  You must delete the files on the drive and start over with new, best non - DRM. If RIP you to .mp3 format, it won't be a problem, more there are other benefits on the Microsoft/WMP .wma format.

  When connected in MSC mode, your computer will detect your drive as just another flash storage device; actually 2 separate devices. 1 will be your drive (internal memory). In your case, E:. F: received the external memory card slot, if there is a card in it or not. If you have no card in the slot, that's why he 'not going anywhere '. Perfectly natural and nothing bad here.

  The MUSIC folder (and others) are hidden by default. You have to display .

  Formatting will erase all content, so this is only necessary performed as a last resort. It's a PITA to re - load it all so that you do not want to unless it is absolutely necessary. But now that yours is formatted, you can start over w/o of the DRM BS and your problems should go away.