Export as a digital version - with menu

Similar Questions

• How to match tunnel-group with auth ASA 8.2 and IPSec VPN Client using digital certificates with Microsoft CA

  Hello

  I set up a lab for RA VPN with a version of the ASA5510 8.2 and VPN Client 5 software using digital certificates with Microsoft CA on a Windows 2003 server. I did the configuration based on this document from Cisco's Web site:

  http://www.Cisco.com/en/us/partner/products/ps6120/products_configuration_example09186a0080930f21.shtml

  Now, the vpn works fine, but now I need to configure a tunnel-different groups so I can provide different services to different users. The problem I have now is that I don't know how to set it up for the certificate is the name of tunnel-group. If I do an ASA debug crypto isakmp I get this error message:

  % ASA-713906 7: IP = 165.98.139.12, trying to find the group through OR...
  % 3 ASA-713020: IP = 165.98.139.12, no group found by matching well payload ID: unknown
  % ASA-713906 7: IP = 165.98.139.12, trying to find the group via IKE ID...
  % 3 ASA-713020: IP = 165.98.139.12, no group found by matching well payload ID: unknown
  % ASA-713906 7: IP = 165.98.139.12, trying to find the group via IP ADDR...
  % ASA-713906 7: IP = 165.98.139.12, trying to find the group using default group...
  % ASA-713906 7: IP = 165.98.139.12, connection landed on tunnel_group DefaultRAGroup

  So, basically, when using certificates I connect always VPN RA only with the group default DefaultRAGroup. Do I have to use a model of different web registration for application for a certificate instead of the user model? How can I determine the OU on the user certificate so that match tunnel-group?

  Please help me!

  Kind regards

  Fernando Aguirre

  You can use the group certificate mapping feature to map to a specific group.

  This is the configuration for your reference guide:

  http://www.Cisco.com/en/us/partner/docs/security/ASA/asa82/configuration/guide/IKE.html#wp1053978

  And here is the command for "map of crypto ca certificate": reference

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/command/reference/C5.html#wp2186685

  Hope that helps.

• Export is mind bogglingly slow with first was last updated

  I'm on a mid 2011 27 "iMac 3.4 GHz i7 with 32 GB of RAM

  10.9.5 OSX

  OpenCL GPU acceleration

  Work external SSD disk

  I've just updated to the latest version of premiere which was released in June (10.3.0) and I am now incredibly slow export time. Currently about 3 hours for a 3 minute video. The images are all 1080 p h.264 to Canon. I use a color combination of Lumetri, FilmConvert, neat video stabilizer and warp, everything I'm aware slow down sometimes make... but I worked with first on this computer for almost 4 years, so I have a pretty good idea what to expect and I have never known export times this slow for such a short video. I've done much heavier video effects in the past which was not long away from export with previous versions of first.

  One thing I noticed, is that my computer does not use a lot of RAM for export now. In memory preferences that I put it to use up to 26 GB of my 32 GB of RAM and it is only using 5.6 GB. I've included screenshots of the memory and the processor activity monitor. My computer certainly does not seem to work as hard as he usually does to export the video as soon as possible.

  Any ideas would be greatly appreciated.

  

  

  Thanks Kevin!

  I got OpenCL enabled in display options. I know I'm pushing the limits of the compatibility with my old material and suspected that might be the problem. However, I did a few tests exporting a second 1 clip with different effects enabled and disabled and actually found out that neat video is the culprit. The video took about 1 1/2 minutes to render with video active Neat and less than 5 seconds to render with this option disabled. I use an old version of neat video and they haven't released an update for the new version of first came out, so I'll probably wait for them to get out an update and see if that fixes things.

  Thanks for the quick response!

• DVD with menu and chapters of first CC 2015

  Hello

  I need to create a DVD with menu and chapters of first CC 2015

  "Import as asset" the wav file that PR exported.

  To do in one step, "import as timeline" both the m2v and wav PR exported.

  Chapter information is transported in the files sidecar (you won't see when you import in yet).

• I developed an Android application for a Digital Magazine with Digital Publishing Suite (Professional). Several weeks ago, I received this message from Google game: "we wanted to let you know that your app (s) listed below statically link against a versio

  I developed an Android application for a Digital Magazine with Digital Publishing Suite (Professional).

  Several weeks ago, I received this message from Google game: "we wanted to let you know that your app (s) listed below statically link against a version of OpenSSL that has several vulnerabilities for users. Please migrate your app (s) to a new version of OpenSSL within 60 days of this notification. From 07/07/15, game Google will block the release of new applications and updates that use versions older, not supported by OpenSSL (see below for more details). »

  I've updated the Android App using function Web app Designer, but they keep sending me this message. I don't understand what I have to do.

  Hi Sheila,

  If you connect to your Google game account, it will show you who sent you the warning to the apps. The generator on the web app produces Android apps which are not affected by this vulnerability.

  Neil

• Touch player with Digital Signatures with reader certificates?

  When Adobe Reader Touch is the ability to create and verify Digital Signatures with certificates.  I have a Microsoft Surface Pro 3 for use at home with the Reader Touch and we use Adobe Reader XI on the systems at work.  I need the opportunity to sign and verify signatures on documents sent to work, is there a solution for this platform?

  Hi Peter,.

  For similar functions, you can try the latest Adobe Acrobat Reader DC on your MS Surface 3 Pro. Adobe Acrobat Reader DC install for all versions.

  Let me know in case if you encounter any problem.

  Kind regards

  Nicos

• Export only the desktop version of the site, mobile version not

  Can I export just the desktop version of my site and not the mobile version with it? I am busy working on my still of mobile site, but the work is done on the office site which must go live every day.

  Hello

  You need to do 2 things for it.

  1. click on 'office redirection' of site properties to remove the exported files of redirection codes.

  Do please go to file > Site Properties > provision > phone > uncheck "Desktop Redirection"

  

  2. after the export of the site in HTML format, delete the folder named like 'Phone'that contains all your phone configuration files. Rest of the files are for desktop PC.

  Concerning

  Vivek

• Can I install windows 7 on early 2015 macbook pro version with El captain?

  Can I install windows 7 on early 2015 macbook pro version with El captain?

  Thank you

  Install Windows 7 and earlier Apple Support on your Mac using Boot Camp -

  Check the tables in the link I provided to see if your computer works for Windows 7.

• Update of digital control with different values with array function

  Hello

  I have attached my code base. I want to execute the code for 2 sets of digital control with a gap between the two values, then pass it. Something like that

  ABC

  Initialize the P1 = 10; P2 = 20; P3 = 30; P4 = 40

  Run the code

  delay = 10ms

  Update of P1 = 150; P2 = 200; P3 = 350; P4 = 500

  Run the code

  jump to abc

  I am stuck how can I update the values of P1, P2, P3, P4? I thought about using a function table but couldn't go further.

  Thanks for the help,

  Ana

  Hello Ana,

  One way you might achieve what you are looking for is using property nodes. These property nodes will allow you to change the values of the block diagram control. You can set up a structure of case inside your loop that will change control through nodes of property value after a certain number of iterations. Here is a community sample that shows how to use the nodes property to change the Boolean controls:

  https://decibel.NI.com/content/docs/doc-22669

  -Erik S

• Windows Movie Maker can convert video to DVD with menu DVD?

  I have a few HD movies on my pc (running Windows XP), F4V type. I need to convert them to DVD with menu DVD. It is not an easy task so can you tell me how to do step by step which would explain my options, configurations. Thank you very much, Willom.

  I have a few HD movies on my pc (running Windows XP), F4V type. I need to convert them to DVD with menu DVD. It is not an easy task so can you tell me how to do step by step which would explain my options, configurations. Thank you very much, Willom.

  ===================================
  Windows XP Movie Maker cannot create video DVDs.
  You need DVD Authoring software.

  The following freeware might be worth a try...
  I am running Windows XP and it works for me.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  Freemake free Video Converter - how to burn video DVDs
  http://www.Freemake.com/how_to/how_to_burn_dvd_video

  Good luck...

• I lost the connection between the icons on the desktop and the program. When I click on an icon, I get the OPEN WITH menu.

  I click right-properties and I get C:\Windows\system32\rundll32.exe Application not found.

  I tried to download fixit and got the OPEN WITH menu.

  It sounds like your .lnk and/or your .exe file associations may have been lost.

  You can try to fix the ".exe" and ".lnk" file associations:
  'Windows XP file Association problems'
    <>http://www.dougknox.com/XP/file_assoc.htm >

  or you can try to do a system restore to a point in time before you had this problem:
  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >
  If you have a .exe association problem, you may need to run the restore of the system from the command prompt:
  "How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP"
    <>http://support.Microsoft.com/kb/304449 >

  HTH,
  JW

• R507 digital camera with Windows 7

  Help!  I have a HP R507 digital camera with SunDisk 64 MB memory card. Recently, I updated my OS to Windows 7, the updated drivers and change the batteries in the camera. For some reason, the device's memory will not empty after that I have download the images. WHAT SHOULD I DO?  CONFIRM YOUR PRESENCE! Thank you! Jim

  Hello Namaycush

  Welcome to the HP Forums!

  I understand that you encounter problems using memory on your camera. I will do my best to help you! First of all, please let me know if you are referring to the device memory or the memory of the memory card. This changes the diagnosis a little.

  Thank you for choosing the HP Forums. Have a great day!

  Mario

• is it possible to use my pdc3070 (camera digital polaroid) with vista? It seems to be ok with windows 7.

  is it possible to use my pdc3070 (camera digital polaroid) with vista?  It seems to be ok with windows 7.

  Hi James,

  (1) what exactly happens when you try to use your camera?

  (2) that you get an error message that you receive?

  Please provide the exact model of your device number.

  Method 1: Run the fixit available in the link below

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Check for any error message in Device Manager

   

  When a device is not functioning, Device Manager also typically displays an error message with an error code that comes with it. First, search for errors in the Manager of devices to do this, follow the steps below:

  (a) open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  (b) If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) in Device Manager, look for the camera and then double-click the device name.

  (d) If an error code has been generated, the code appears in the status area of the device under the general tab

• How can I replace an existing win 7 old os version with an OS licensed to win 7

  I have a win 7 64 bit pre-installed operating system in my laptop, and I want to replace it with a professional an another win 7 64 bit version. so is this possible or how can I replace my older version with a new operating system version os.

  Is the old copy on the laptop of the same edition of Windows 7 Professional or is - this another edition (for example, Home Premium, Starter or Home Basic)?

  If its anothere Home Premium, Starter or Home Basic edition, you can use the Windows 7 Professional key and upgrade to upgrade to Windows 7 Professional.

  If this is the same Windows 7 Professional edition and all you want to do is license swap, follow these steps:

  Press Windows key + R

  Type: slui.exe 3

  Press enter on your keyboard

  Enter your new product key and click next to activate Windows 7 Professional.

  -------------------------------

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade from Windows 7 Starter/home Basique/Familiale Premium to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

• Why can't switch preview output to a pro version with a genuine key?

  Hello

  I just reinstalled my operating system of Windows 8. I had a quite old and worn out 32 bit version and I decided to have a 64-bit version. I installed the version overview of consumer 64-bit on my machine and then tried to enter my 100% legitimate Windows 8 Pro Upgrade key that I got about 6 months ago. To tell the truth, then I upgraded the 32-bit version with this key, but what really matters? Why Windows activation does not accept my legal key?

  The overview of windows 8.1 has its own key. You cannot use the same key as your windows 8. From 32 to 64-bit, you must download the file iso 64-bit for the preview and burn it on dvd and to whom.  Install from the disk and do a custom installation and delete the partition with win 8. Use a Windows 7 or a disc burning program to make a disk bootable since win 8 cannot burn dvd bootable - page download and key here -.

  http://Windows.Microsoft.com/en-us/Windows-8/Preview-ISO

  Don't forget - this is just a preview for testing version and is not final. You should be able to upgrade to the final version, but have recovery discs do just in case you can not. This is when you will use your win 8 original key.