Export best settings?

Similar Questions

• Export best settings for Canon XF100 to SD

  Hi guys, my first post - please be gentle!

  Recently, I came across from FCP to Premiere Pro CS6. I also acquired a camera Canon XF100 (the output being MXF files) and were shooting to test HD sequences which is 1920 x 1080. However, the project that I will be shooting must be exported as a PAL SD. MOV file, as it should be used for broadcasting by a non-Community HD station.

  I tried several different sequences and export of settings to create the SD card. MOV file, but in almost all of them I keep blurring the lines on the screen. I now do not know if I should shooting in SD or HD... I thought I could shoot in HD for a better image before rendering on a permanent export of SD. (I used to do in FCP)

  Please excuse my inexperience... but I'm pulling my hair out and I had little first left... If someone could help with the sequence and export of settings, I would be grateful!

  Thanks, Luke.

  PAL is 25 frames per second, so it reduces auto. You can put your images in a sequence of pal dv and see how it will work.

• Best settings for the export of EI

  Hello

  I wonder what that the best settings for export to EI for installation in first CS5.5. Previously I would scan from a band and would export .avi without loss of EI, but now I use the XDCAM EX 1080 50i on first sequence presets and I wonder if I need to change the parameters of the AE or just keep them as lossless?

  As always, thanks in advance!

  Keep it without loss.

• What are the best settings for video export in first Pro Cs5.5 in HD MP4 format?

  What are the best settings for video export in first Pro Cs5.5 in HD MP4 format?

  Any help would be greatly appreciated! Thank you

  Under the H.264 are several presets for ipad.

  Experiment with those.

  http://www.Apple.com/iPad/specs/

  Looks like me 720 p is the largest export format.

• What are the best settings for the export of the comps before edditing in Premiere Pro

  Hi all!

  As the title says, who are the best settings to export compositions of EI on Pr.Pro and then edit them?

  Let me explain: I have two comps in AE (intro and outro) and want to export in Pr.Pro for with a fottage edditing I shot.

  When I give the size of the files are huge (30 sec = 7 GB).

  Which is the best method (and settings) I can export the intro and outro to a 'normal' size of the file and then put them in Pr.Pro without losing quality?

  [Comp settings: HDTV 1080 29.97 (1920 x 1080)]

  AE and Premiere Pro the two CS4

  If you're having trouble to play things in your Premiere Pro timeline, then find out editing in offline mode. In the edition offline, you work with a version of lower quality of an asset when editing and then replace with a version high quality when you are ready for the release.

• What are the best settings to export the .mov file? my video jumps

  What are the best settings to export the .mov file? I have movie 1280 x 720 and I can export without problem, but sometimes it jumps or gets stuck when I play. I don't know if it's my video card or the actual file. I used better quality setting and compressor H.264.

  Thank you.

  As you suggest, it could be a problem with your hardware that is not in a position to make the video on this particular resolution,

  I tried the same thing and it works fine for me without any problem. You can always export the movie in a format you want and then use other software video converter to get the desired format. If your video does not work then you can also, to let know you that there is a problem with your hardware.

• sequence right and export of settings in Premiere Pro CS6, video with still images

  I am trying to run a video on my site (self hosted). This video, made with Premiere Pro CS6, consists of still images with different video effects.

  This video is just 50 seconds, but when I have this turn in the format mp4, webm and ogg, get large files and the quality is not good.

  Could you please guide me to find good sequence and export of settings in Premiere Pro CS6 to get a video for the best possible quality on the web?

  A precise description of the parameters would be great.

  Thank you

  Silvia

  To export, set the resolution that you want to use on the web.

  Make the sequence of parameters in a way to export these settings

• Best settings for the encoder to 720p@30fps (may - Ann or Jeff B.?)

  I have recommendations for use of Ann and b. Jeff for several months now using cs 4 encoding that can help get the high quality HD on a DVD-video.  Thank you!

  Now, I have a project using 720 p at 30 fps... Jeff online tutorial does not cover 720 p @ 30 fps.

  What are the best settings for my coding export?

  Thank you, Tom B.

  Process the images 720p30 in the same way that you process images 1080 p 30.  The difference with images of 60 p is because the size of the frame * and * the rate had to be adjusted.

  -Jeff

• Best settings for AE comps entry in Pr.Pro Cs4

  Hi all!

  As the title says, who are the best settings to export compositions of EI on Pr.Pro and then edit them?

  Let me explain: I have two comps in AE (intro and outro) and want to export in Pr.Pro for with a fottage edditing I shot.

  When I give the size of the files are huge (30 sec = 7 GB).

  Which is the best method I can export the intro and outro to a 'normal' file size and then put them in Pr.Pro without losing quality?

  [Comp settings: HDTV 1080 29.97 (1920 x 1080)]

  AE and Premiere Pro the two CS4

  Please don't cross-post the same question in multiple forums. This makes things more difficult for people, answer questions, and it fragments the conversation. Consider that someone could lose a lot of time answering your question on a thread, not knowing that you get help already on another thread.

  Here is a link to the same question you have posted on the forum of After Effects (and my response):

  http://forums.Adobe.com/message/3227469

• Best settings (channel) for AE Gen3, for Time Warner cable?

  Best settings (channel) for AE Gen3, for Time Warner cable?

  Sorry, but it is impossible to tell without having information about all the other networks wireless around you and the channels they use.

  But even if you have had this information, all other wireless routers are changing the channels they use all the time... so even if you come with a 'better' channel to use this morning, this channel could be overcrowded this afternoon.

  When you start your AirPort Extreme, it will automatically scan to find the best channel to use both.  If you are in an area with many other networks wireless around you, it may be necessary to restart the AirPort Extreme almost every day.

  If you have $15 or so to invest for a good WiFi utility... and you are willing to spend a lot of time all the time in looking at other wireless network around you... it is possible to do things the really hard way.  Post back if you might be interested by this.

• What are the best settings to standard calibration for the XBR65X850C?

  What are the best settings to standard calibration for the XBR65X850C?

  Hi DRATCLIFFE,

  Thank you for your time to write a post.

  We are very sorry for the late reply.

  Change the picture or the sound settings of your TV depends on your preferences and on what you watch/listen to.

  You can use the settings preset for image and sound.

  In addition, to better enjoy your viewing experience, follow these steps:

  • Install the latest software update. The updated software and the driver for your Sony product are available online.
  
  
  • Set the automatic software download setting to automatically download software updates.

  Thank you
  ^ Ron

  If my post answered your question, please mark it as "accept as a Solution.

• The speeds are horrible!  need help with the best settings.

  I can't not significant with my internet speed (less than 1 Mbps in the speed test).

  These speeds are intermittent.  Sometimes - but rarely - I get much higher speeds I have pay for.

  My provider is Time Warner.  I have a time capsule tall which is 1 year old.  I also have an old flat capsule which is a wireless extension, as well as a newer airport express (flat type) and an airport express that plugs on the (old) wall as extensors as well.

  I called Time Warner repeatedly.  They have sent people twice and messed around, but the problem persists.

  I started think maybe it's time Capsule.  (I tried my old mac into the router directly - wiring because it has an ethernet port - but it would not connect).

  I don't know a lot about what do all the settings, so I have not messed with a lot (even if I tried to change the renew the DHCP lease for 1 hour instead of 1 day).

  Could give me an idea on the best settings for a time used as wireless with extensions Capsule?

  Is it possible that my older Extenders slow down things?

  Thank you.

  It is usually best to start from scratch.

  This modem do you have? Brand and model please.

  Simply run the TC... measure speeds... by wireless and ethernet and report.

  Run the TC and the new express... (much better than GEN 1 or 2... TC equal but gen3 gen4 TC is greater than the express new).

  In airport utility watch connection speeds. It shows the speed of connection, if you place your mouse over it.

  Slow links will cause worse problems on the line... Make sure that all the repeaters (wireless extensions) get at least good signal...

  Please give numbers and the screenshots as it helps no end.

• Best settings for a wireless home network?

  I want to get help on a somewhat complicated setup: my connection in optical fiber gets into my house to a room in the basement. I have a last generation Asus router, which spreads the signal through various Ethernet cables. Wi - fi is disabled, because it wouldn't reach anywhere. Upstairs, I have a new airport time capsule, which creates the main WiFi network for the home. However, it dose not brought into the world. In the box where I want to extend the signal, I have a 5th generation AirPort Extreme (it does not support the alternative signal) connected to an Ethernet jack.

  Now my questions:

  1. my Time Capsule should be set to bridge mode, because it is connected to a router? Do not forget that I can't exclude this router because it brings the signal via a cable to other places.

  2. If the answer to the above is Yes, is there a way to establish a network of wi - fi comments?

  3. What are the best settings for the Airport Extreme, which is supposed to extend the signal? It is better to create a new wifi network, as it is connected via Ethernet, or should I put it to extend an existing wifi network?

  I hope that I have explained clearly, I'm only half of technology warned, and I am a bit lost...

  1. my Time Capsule should be set to bridge mode, because it is connected to a router? Do not forget that I can't exclude this router because it brings the signal via a cable to other places.

  Own configuration of Apple software, AirPort utility you should implement in Bridge Mode time Capsule to avoid a network error called Double NAT. But, ironically, if you call Apple support, they will tell you 'ignore' the Double NAT error and run time Capsule as another router on the network.

  Normally, you can avoid having a Double NAT error on the network, because that might lead to other problems, Apple boards so... If you call them... is controversial. Basically, it seems that Apple wants a router from Apple in charge of both the network possible... not another router.

  So, you will need to decide what advice to Apple you want to try.

  2. If the answer to the above is Yes, is there a way to establish a network of wi - fi comments?

  The feedback network option will not work correctly if the Capsule is configured in Bridge Mode.

  3. What are the best settings for the Airport Extreme, which is supposed to extend the signal? It is better to create a new wifi network, as it is connected via Ethernet, or should I put it to extend an existing wifi network?

  "Extend a wireless network" is used only when the airport connects to another router from Apple using a Wi - Fi connection. Since you will use Ethernet to connect, you would use "create a wireless network" setting.

  But, you won't have to worry about this if you are using Apple Configuration "Wizard" to set up the AirPort Extreme... it automatically applies the correct settings.

• Xbox 1 best settings?

  Bottom front line: I'm looking for settings that offer the best online experience especially for Advanced Warfare (unique xbox of installation). That is to provide the lowest latency experience.

  No I'm not having any major issue, and yes I have the latest firmware. And I have the xbox with a reserved IP (static IP) configuration. I connect via a wired connection using CAT 6 cable modem router and router to the xbox. I welcome the Moncks Corner SC ISP telecom, I have cable internet 50 Mbps down and 10Mbps up.

  Things I want to discuss / ask questions on:

  Question No. 1: UPnP, DMZ or Port forwarding? Can I get a NAT open with any of them, but that it will provide the lowest latency?

  Question #2: Firewall, what are the best settings for xbox live? And if the DMZ is used these settings even matter?

  Question #3: MTU, some argue that it makes a difference, I played with it but can't say for sure if he hit latency. It will improve the latency to change the MTU to something less than the default 1500?

  Question n ° 4 (Big Question): QoS, first of all 2 in addition to the upstream. Wireless WMM, activate or say activate? Downstream, I noticed a custom rule can be configured to the MAC address of the xbox, would this help or aggravate the latency? And finally, the QoS upstream, activate of course...

  Click on the list of priority rules Qos; rule configuration QoS and it shows the current rules and also allows to create. By applications default xbox are only high value while Skype and other unnecessary things for me are defined as above. I changed everything that has been defined as higher default upward except for Netgear EVA (not even sure it's does anyone know?). And I put the xbox rule at the very top. So in summary Xbox and Netgear EVA are the only two on highest everything is something more low.

  So to summarize the #4 Question: I did more damage than good or is there a configuration still better for this? I noticed I can configure custom rules, and even a few rules for the LAN port or the MAC address, or people would be better options?

  Question 5: I know what most QoS configuration you must put in your bandwidth and it must be something less than your real otherwise everything collapses. (I.e. I get 10 Mbps upstream, when I get my bandwidth upstream in the router, I have to put something lower than what I get actually.) Speed test vary from about 8 to 9 Mbps, so I have to put a value in the router does not exceed 8) when I click on the button to speed test it auto updates about 9,66 Mbps. but I know sometimes I get lower than my ISP especially during peak periods. So I carefully put upstream in the router to 8, anyone see a problem with this or know why this QoS system would be different from others?
  Summary: Real / bandwidth upstream value set in the router.

  Question #6: will turn off wireless radios improve the latency of the wired connection or stability? and if so, use a second router as access point to manage the wireless side would be a good option?

  Question #7 (Last): DNS servers. I can change them on the xbox, it would make a difference for the xbox built-in;
  I leave the xbox DNS automatically and I changed the DNS (8.8.8.8) google router,
  rather than leave the default DNS ISP in the router and manually change them on the xbox to google DNS?

  Good, so many questions, I'm not here to argue about the placeable effect and Yes, I understand that the offset cannot be completely rid of and depends on many factors. The default settings work very well, but I played Call of Duty for many years now with several Internet service providers and many different routers and configurations, I learned that tweaking a configuration just gives people with no skills (like me) a nice advantage in most of the games. And if you combine the right settings with real skill, well... You all saw that the person it is impossible to kill and you swear was hacking so report you them, but guess what they were not hacking. I know because I had a good Setup once with verizon Fios and I was accused of cheating all the time. Unfortunately I can not optical fiber internet here where I live now.

  Also, with all what I've tried so far, the common Nighthawk is by far the best router that I have ever used and I've already upgraded my K/D average after owning it for only a few days.

  So with Black ops 3 coming out I wanted to make sure you that I was going to get the best experience I could.

  I did a lot of unique research and research made the changes and made a good restart. So far, my experience online is awesome and is like day and night compared to play war of the art. I don't know if Black Ops 3 is the only reason or not, but I will detail below what is currently working the big one for me.

  On my modem (Xfinity standard modem/router with 90/15 gb plan), I've disabled the firewall completely, then set it to bridge mode. Then plugged my router. For the settings of the modem for me is 10.0.0.1 and default username and password (admin and I remember PW, but you can google if you have Comcast.)

  The nighthawk.
  I've updated the firmware.

  Updated my timezone in the Security menu.

  Changed booking DHCP to a max de.100 Beach

  Xbox installation with an ip reserved (static ip) de.150 (well outside the range of the reserved IPS)

  Configure the redirection of port to the Xbox with
  TCP: 80
  3544, 4500, 500 AND UDP: 88
  Both: 53, 3074-3075-3076, 1863, 16000

  I left upnp on

  SIP disabled and set to open

  Lit upstream qos and used the built in speed test to set the download bandwidth.
  Edited all the default rules with a higher priority and replaced by a highest priority.
  Past the priority of default Xbox High to high.
  And set up a custom rule to my Xbox MAC address with the highest priority.

  On the Xbox:
  I disabled Kinect and DVR

  Left to get automatically network ip settings
  But manually set the dns (I use 8.8.8.8 and 8.8.4.4)

  On my TV:
  Game mode on
  All reductions and movement smoothing off the coast.
  If you have the possibility to choose the refresh rate as close to 60 hz as possible

  Good reboot after all the setting changes:
  Unplug the router
  Then unplug the modem
  Then completely turn off Xbox (hold the power button until it turns off)
  Wait a minute then turn on Xbox
  After the Xbox is turned on wait at least 5 minutes before plugging modem.
  Wait for a modem to fully turn on
  Then connect Router and wait until it turns completely
  Once the Xbox connects to the XBL go to settings network and run multiplayer test. After test bear all the triggers and bumpers until the next screen appears.

  This may be unimportant, but that's what I did and touch wood, I continue to have an incredible experience I've had so far with black ops 3.

• Best settings for iPhone and Photos for these results?

  Ok. So here's what I want to happen: I want the photos and videos that I take on my phone to download automatically on iCloud, so can I have pictures in my Macbook, but I don't want to not all of my Macbook is displayed on my iPhone. Can anyone suggest what are the best settings to achieve, if possible? Thank you.

  On the iPhone: settings > iCloud > Photos > download on my photo stream on. Note that only new photos after you have enabled this desire on upload.

  On the MacBook: Apple menu > System Preferences > iCloud > Photos - Options > my photo stream on.

  See My Photo Stream FAQ - Apple support for more information.