Export bookmarks in csv file
I have a script that exports bookmarks to a csv file.
The script works really at a stage where the csv file is created and opened with the name mark book being listed in the csv file.
All other bookmark names are not.
Some advice would be most appreciated by modifying the script to list all bookmarks in the csv file.
var bm = this.bookmarkRoot;
var ibmLength = bm.children.length;
for (var i = 0; i < ibmLength; i ++)
BookName var = bm.children [i] .name;
fieldValues var = [];
fieldValues.push (bookname);
this.createDataObject ('output.csv', fieldValues.join ());
this.exportDataObject ({cName: 'output.csv', nLaunch: '2'});
Thank you
You must use media for loop for:
var bm = this.bookmarkRoot;
var ibmLength = bm.children.length;
fieldValues var = [];
for (var i = 0; i)< ibmlength;="" i++)="">
BookName var = bm.children [i] .name;
fieldValues.push (bookname);
}
this.createDataObject ('output.csv', fieldValues.join ());
this.exportDataObject ({cName: 'output.csv', nLaunch: '2'});
Tags: Acrobat
Similar Questions
-
Script export to a .csv file
Hi guys,.
I have this script to get some info for my ESX hosts, it works fine but I need to get the report to a .csv file, will be possible to do?
foreach ($esxImpl in (Get-VMHost)) {}
$esx = $esxImpl | Get-View
$netSys = get-view $esx.ConfigManager.NetworkSystem
{foreach ($pnic to $esx.Config.Network.Pnic)}
$vSw = $esxImpl | Get-VirtualSwitch | where {$_.} {NIC-contains $pNic.Device}
$pg = $esxImpl | Get-VirtualPortGroup | where {$_.} {VirtualSwitchName - eq $vSw.Name}
$order = ($esx.Config.Network.Vswitch |) where {$_.} ({Name - eq $vSw.Name}). Spec.Policy.NicTeaming.NicOrder
$cdpInfo = $netSys.QueryNetworkHint($pnic.) Device)
$pnic | Select @{N = "ESXname"; {E = {$esxImpl.Name}}.
@{N = "Teddy"; E = {$pnic. Device}},
@{N = ' model'; E = {($esx.)} Hardware.PciDevice | where {$_.} ID - eq $pnic. PCI}). DeviceName}},
@{N = "vSwitch"; {E = {$vSw.Name}}.
@{N = "Exchange"; E = {$pg | % {$_. Name}}},
@{N = 'Speed'; E = {$pnic. LinkSpeed.SpeedMb}},
@{N = 'Status'; E = {if($pnic.) (LinkSpeed-ne $null) {'up'} else {'down'}}},
@{N = "PCI slot"; E = {$pnic. PCI}},
@{N = ' Active/stand-by/no assigned'; E = {if($order.) ActiveNic-contains $pnic. Device) {'active'} elseif($order.) StandByNic-contains $pnic. {{Device) {"standby"} else {"unused"}}},
@{N = "IP range"; E = {[string]: join ("/", @($cdpInfo [0].))} Subnet | {{((% {$_.: IpSubnet + "(" + $type + "") ""}))}}.
@{N = 'Physical switch'; E = {& {if($cdpInfo[0].connectedSwitchPort) {. connectedSwitchPort.devId $cdpInfo [0]} else {"CDP not configured"}}},
@{N = "PortID"; E = {& {if($cdpInfo[0].connectedSwitchPort) {. connectedSwitchPort.portId $cdpInfo [0]} else {"CDP not configured"}}}
}
}Thanks in advance.
Oops, I had a name of my test environment.
Should be ok now.
-
Export bookmarks to html file does not export bookmarks in the toolbar
There's Firefox would export all folders and Favorites, but it always seems that I'm losing the bookmarks toolbar every time.
This happens with all versions of firefox, after new installations of firefox and drag my computer with the new installation of the OS software to eliminate all possible problems with the OS and Firefox software. Always favorite no toolbar after reinstalling.Can bring you have or help me?
ScottI can understand only my own experience, which is that I can find the Bookmarks Toolbar at the end of the file to export, but before Unsorted Bookmarks.
Because the file is not useful for indentation, it is very difficult to read the structure. I posted a little hack in this thread if you think this might help: https://support.mozilla.org/questions/1034047#answer-660062
-
I created a html of my favorites and a .json file to be uber-safe, but either / both of these files contain all of my bookmark folders or bookmarks only "others"? I've accumulated hundreds of bookmarks over the years and sorted into relevant folders to facilitate the conclusion.
Just open the bookmarks.html files yourself and see what is included.
File > open file...
-
How to export information to CSV file directory?
I created directories of files for the files I captured digitally. I need have the file directory information in a spreadsheet to determine the total number of pages that have been caputred.
It is the labor to type of file directory information into a spreadsheet.
If someone as a methodology to accomplish this task, it would be appreciated.
Archivers
Here are two methods that I use to capture/save/print file information, which can help you:
1. to view the contents of a folder, open Windows Explorer, navigate to the source folder and press Ctrl + A to select all items. Hold down the SHIFT key, right-click on the selection and choose copy in the path. Open your spreadsheet (or processing) program, paste (Ctrl + V) the list to it and adjust the width of the column. You can now print, edit or save it and add to it later.
2. to view the hierarchy of folders, open Windows Explorer, navigate to the folder that you want to start on, hold down the SHIFT key, right-click on the name of the folder and choose command window open here. Tree type. clip and press ENTER. Open your word processing program and paste (Ctrl + V) the list to her. You can now print, edit or save it and add to it later.
The switches are tree /a | clip (use of characters) and tree /f | clip (view the files in each folder).
-
DB export table to MDB file...
Hi all,
One have idea about to export a table of database and convert to MS Access file *. MDB? *
Thank you in advanceUse sql developer (Toad, pl/sql developer,...) to export data to csv file, then import it with ms access in table required.
-
Externalize strings not generating a CSV file translations
Hi gurus,
I need to do outsourcing of presentation layer, so doing it, I activated by clikcing to outsource the table on the area in question and after I have go to tools-> utilities-> externalize strings-> run
the csv file, it creates is having only the English, I don't get the translations to other languages in the csv file. I m hit there.
Pls help!
Thank you
AnthonyHi Anthony,.
The generated CSV file will be in English only. If you try to just change in OBIEE Presenatation layer to another language, you need to perform operations of addition after the export of the CSV file on your machine.
Look at this article: (I think that's what you're looking for);
http://oraclebizint.WordPress.com/2007/10/29/Oracle-BI-EE-101332-presentation-layer-translation/
Kind regards
-Laurence. -
Export the library of books as a .csv file?
I'm trying to compare my Calibre library with my library of books in iTunes 11.4. Caliber exports data .csv file, but I don't see how the same (or even a file of Excel data or numbers) to the ca. 950 books in my library of books to iTunes. I managed to 'print' a PDF (28 pages) of it, however.
Is it possible to get a data file of the compatible spreadsheet of my books on iTunes?
I never did anything with iBooks, but with iTunes you can actually highlight a series of lines, copy, and paste.
-
I need to export the address book in unicode csv files. When?
My address book contains Chinese and Korean names. Their special characters get lost when I export the address book to a CSV files to import them from Open Office.
It is true that Chinese and Korean characters are not maintained when you use the export into csv format, but I tried an example with the option provided by MoreFunctionsForAddressBook and it seems to work fine.
Select an address book in the address book, then make a right click, MFFAB/Export/as csv (.csv).
-
Export to a CSV of tiara does not produce a CSV file!
Seems strange but exporting to a CSV of tiara does not a CSV file. Tiara produces a tab delimited file, which is obviously not a CSV file. Tiara aid said even the 'CSV' file is a tab-delimited. The software expects a comma as delimiter does not read the file properly created tiara. It is possible to specify the correct delimiter?
You can ask the decimal/separator, you need if you start exporting CSV from a script
Call DataFileSave ("
C:\temp\EXAMPLE.csv See also http://forums.ni.com/ni/board/message?board.id=60&message.id=8851&query.id=146775#M8851
-
I need to export my Yahoo address book to Outlook Express 6. When I try, a window appears saying I want to find or save this file? I click on search and then my page redirects to Microsoft says I have a csv file and no way to open it.
Hi sntuld,-What, exactly, is a transcript of the error message that you receive?You must save the .csv (contacts file) of the Yahoo address book file, and then import the file into Outlook Express.If you are looking for the recorded .csv file, use the search function and check if you can find the file.Here are some links that you might find useful: -
Tags and Notes in a single CSV file export
I'm trying to export tags and notes in to a CSV simple change of batch and importation in vCenter. I have a script to export tags and I can export notes, but I want to make in a single operation and to a simple CSV file. Here's the current code, I use and please forgive me for not crediting the original creator, I built this script I don't remember! I have a Notes column in the CSV file resulting, but he is empty... Thanks in advance.
Don
Current script:
If (-not of $DefaultVIServer.IsConnected) {}
SE connect-VIServer "vcenter.server" - Credential (Get-Credential $_.) User name)
}
$tagCat = @)
$tagTab = @ {}
foreach ($tag in (Get-TagAssignment)) {}
$tagCat += $tag. Tag.Category.Name
$key = $tag. @entity.name
{if ($tagTab.ContainsKey ($Key))}
"$val = $tagTab.Item ($key)"
}
else {}
$val = @ {}
}
$val. Add ($tag. Tag.Category.Name, $tag. Tag.Name)
$tagTab [$key] = $val
}
$tagCat = $tagCat | Sort-Object-Unique
$tags = foreach ($row in ($tagTab.GetEnumerator () |)) Sort - Object - property key)) {}
$VMName = $row. Key
$VMNotes = get - VM $VMName | Select-Object - ExpandProperty Notes
$obj = new-Object-property PSObject @ {}
Name = $row. Key
}
$tagCat | %{
$obj | Add-Member-Name $_-value $row. Value [$_]-MemberType NoteProperty
}
$VMNotes | %{
$obj | Add-Member-name 'Notes' - value $row. $VMNotes - MemberType NoteProperty
}
$obj
}
$tags | Export Csv tags.csv - NoTypeInformation - UseCulture
Try like this
If (-not of $DefaultVIServer.IsConnected) {}
SE connect-VIServer "vcenter.server" - Credential (Get-Credential $_.) User name)
}
$tagCat = @)
$tagTab = @ {}
foreach ($tag in (Get-TagAssignment)) {}
$tagCat += $tag. Tag.Category.Name
$key = $tag. @entity.name
{if ($tagTab.ContainsKey ($Key))}
$val = $tagTab.Item ($key)
}
else {}
$val = @ {}
}
$val. Add ($tag. Tag.Category.Name, $tag. Tag.Name)
$tagTab [$key] = $val
}
$tagCat = $tagCat | Sort-Object-Unique
$tags = foreach ($row in ($tagTab.GetEnumerator () |)) Sort - Object - property key)) {}
$VMName = $row. Key
$VMNotes = get - VM $VMName | Select-Object - ExpandProperty Notes
$obj = new-Object-property PSObject @ {}
Name = $row. Key
}
$tagCat | %{
$obj | Add-Member-Name $_-value $row. Value [$_]-MemberType NoteProperty
}
$obj | Add-Member-name 'Notes' - $VMNotes - MemberType NoteProperty value
$obj
}
$tags | Export Csv tags.csv - NoTypeInformation - UseCulture
-
A column value a comma, which leads to a column different while export to CSV file
Hi all
I have a few columns that will be built in the CSV file. The problem is in one of the column value of a comma in there. Thus, it creates a separate column two in CSv file.
For example:
Name of the column: description.
Value: Bumpers, cushion
But then that export in CSV file, it gives me bumper as a column and seat cushion in the second column.
I'm using Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
Appreciate your help.
Thank you
Suresh
Hello
REPLACE (str
, '"'
, '"'
)
Returns a copy of the string str, but with all the ' "" ' changed substrigs in ' ' ' "
This assumes that your front-end is not treat & like variable substitution marker. If it is so, and -is your SQL * more escape character, then you can say
REPLACE (str
, '\"'
, '"'
)
-
Export several pieces of information into a single CSV file
Hi guys,.
I try to export the information to a .csv file. At the end of the day, I want the following information in the CSV file with the following headers:
Name, NumCpu MemoryMB, Description, NetworkName
I can get all the information for the first four topics (name, Description, NumCpu, MemoryMB) with the following command:Get - VM MYVM | Select Name, NumCpu, MemoryMB Description | Export-Csv-path "c:\outp\VMs.csv" - NoTypeInformation
For the VLAN (aka NetworkName) I run the following command:
Get - VM MYVM | Get-NetworkAdapter | Select NetworkName | Export-Csv "c:\output\VMs.csv" - NoTypeInformation
The command to run successfully, however the second command is to crush the first information. I tried - add the switch which gives an error, which suggests that I use - force, I also tried, that is the best that I could realize all the information exported, but with the unwanted spaces. Is there an easy way to combine these two orders and export them to the CSV on the same line?
Thank you.
Use a calculated property.
Try like this
Get - VM |
Select the name, NumCpu MemoryMB, Description,@{N='NetworkName'; {E = {Get-NetworkAdapter - VM $_______ | select - ExpandProperty NetworkName}} |
Export-Csv-path "c:\outp\VMs.csv" - NoTypeInformation
-
Not possible to export a list of virtual machines that are created in the past 7, 30, 120 and 180 days since an imported csv file containing the date of creation of virtual machine. My questions is the correct statement to the variable: $VmCreated7DaysAgo: $_CreatedOn "-lt" $CDate7.
# #SCRIPT_START
$file = "C:\Users\Admin\Documents\WindowsPowerShell\08-18-2014\VM-Repo.csv".
$Import = import-csv $file
$VMCreatedLast7RDayRepoFile = "C:\Users\Admin\Documents\WindowsPowerShell\08-18-2014\Last7Days.csv".
$start7 = (get-Date). AddMonths(-1)
$CDate7 = $start7. ToString('MM/dd/yyyy')
$VmCreated7DaysAgo = $Import | Select-object - property name, Powerstate, vCenter, VMHost, Cluster, file, Application, CreatedBy, CreatedOn, NumCpu, MemoryGB | Where-Object {$_.} CreatedOn - lt $CDate7} | Sort-Object CreatedOn
$TotalVmCreated7DaysAgo = $VmCreated7DaysAgo.count
$VmCreated7DaysAgo | Export-Csv-path $VMCreatedLast7RDayRepoFile - NoTypeInformation - UseCulture
Write-Host "$TotalVmCreated7DaysAgo VMs created in 7 days" - BackgroundColor Magenta
Invoke-Item $VMCreatedLast7RDayRepoFile
# #SCRIPT_END
You can use the New-Timespan cmdlet in the Where clause, it returns the time difference between 2 DateTime objects.
An example of this cmdley
New-TimeSpan-start (Get-Date). AddDays(-7)-end (Get-Date). Select days - ExpandProperty
In your case, you could do
Where {(New Timespan-démarrer ([DateTime] $_.))} CreatedOn) - end $start7). {7 days - gt}
But beware of negative numbers.
Maybe you are looking for
-
. CBV file type displays the content rather that give download options
I just changed my Web site hosting provider; old and new providers of Linux services.My site is scottishcca.co.uk - a site of chess by correspondence - and I use Win7 and 26.0 Firefox.There is a page (members/downloads) where members can download fil
-
When I opened lonely (I would call it the classic) it always opens the same game that is played partially. It's like it always opens to the same saved game, but prompt the asking to play a saved game does not appear. Before this problem rather than o
-
I CANNOT PRINT E-MAIL IF THE PRINTER PRINT SITES WEB AND EVERYDAY PRINTER PROJECTS
I CAN'T PRINT MY EMAILS
-
The file does not open in Microsoft Word
When I try to open an online text document, it will not open in Microsoft Word. How can I change this?
-
I just upgraded again own computer with Windows7 from my old XP machine. I have icc profiles for my two monitors. Under XP, I had nothing wrong with 'apply' or 'associate' or 'use' of these profiles by using the MS color, and both monitors would ch