Export failed to achieve the required bit rate and colour care space - ProRes 422 in MPEG2

Similar Questions

• Failed to create the required registry key: vmware, Inc. error: 2 when installing the vm 7 wareinwin and the installation of any software of a few errors in registry pls help...

  Failed to create the required registry key: vmware, Inc. error: 2 when installing the vm 7 wareinwin and the installation of any software of a few errors in registry pls help...

  Hello mnaveen.kumar,

  Search the registry to see if this key was created. Sometimes, the installation program does not have permission to this key.

  HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc.

  You can try to manually create the key to see if this will help.

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• What is the best bit rate to use for files WMV to DVD?

  I shoot with a low point and shoot digital camera.  I take the files AVI-video from the camera, which are quite large, and edit them in Windows Live Movie Maker 2011 and then save them as WMV files that are typically much smaller.  I like to create DVDs with better videos using Windows DVD creation or another program video.  My question is what bit rate to specify when I publish the films completed as WMV files?

  My camera AVI files can be played in Windows Media Player.  They have little of rates which vary from about 3 Mbit/s to a little more than 5 Mbps.  Is STANDARD DEFINITION 640 x 480 VGA quality video.

  Movie Maker default bitrate for the option "burn to DVD" is 2.99 MB/s.  I do not notice a difference in quality between the 2 MB/s I usually use and.  (I chose 2 Mbps, because in the past, I've used Windows Media Encoder and it defines "DVD quality" like 1-2 Mbps transmission speed and quality "HD" as 5 Mbps.)  Bit rates below 1 Mbps up to 500 Kbps have been defined as "Quality VHS" and below which has been 'QVGA quality'.

  With important videos, I publish movies with a flow rate of 5 Mbps.  Default speed of movie Maker for videos "to be played on my computer" is 7.69 Mbps, but it's more than the AVI from the camera, then how is this possible?  How can save the file with a bit rate higher than the bit rate of the input file?

  Is another experiment, a good way to decide on the rate of good bit for my projects?

  Hello

  Thanks for joining us out on Microsoft Community Forums. I understand that you want to know the best bitrate for video files Windows media burn on DVD.

  I suggest you check out the link to check the bit rate and resolution.

  The movie settings: frequently asked questions.

  http://Windows.Microsoft.com/en-in/Windows-Vista/movie-settings-frequently-asked-questions

  Refer to this video file formats can I choose to publish my movie in windows movie maker? The link above.

  If you face problems more while working with Windows Mail on Microsoft Community Forums, we will be happy to help you.

  Thank you.

• ConfigMgr requires BITS installed and enabled in Internet Information Services (IIS) before Setup can continue.

  Trying to get SCCM 2007 deployed. However, could not succeed prechecks for Management Point. Even though I have BITs enabled from IIS in Add / Remove components. This does not seem to fix this error. I have re-installed Win2K3 to see if that solves the problem, but no luck. Google search and exhausted. Now need some answers of MS. Pas able to determine the exact reason for the BITs not detected.

  Here it is the errors

  ***********************************************************

  (BITS) Background Intelligent Transfer Service is required for the management point and BITS compatible distribution point site system roles. (BITS) Background Intelligent Transfer Service is not installed and/or IIS 6 WMI for IIS7 compatibility components is not installed on this computer or the remote IIS host, or the Setup program could not verify the remote IIS settings because IIS common components were not installed on the site server computer. ConfigMgr requires BITS installed and enabled in Internet Information Services (IIS) before Setup can continue. Setup cannot continue.

  ***********************************************************
  (BITS) Background Intelligent Transfer Service is required for the management point and BITS compatible distribution point site system roles. (BITS) Background Intelligent Transfer Service is not configured properly and/or IIS 6 WMI for IIS7 compatibility components is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the computer site server. ConfigMgr requires BITS be installed and active in Internet Information Services (IIS) before Setup can continue. Setup cannot continue.

  ***********************************************************
  and below too although I sent this patch. Cable. :)

  This software update addresses several MMC errors that may occur when you run the Configuration Manager console. This update must be applied if one of the following conditions occur: Configuration Manager console stops responding when the host computer is low on available memory, display errors in context menu on the console home pages, or inconsistent after drag - move fail. More information on this update is available at: http://go.microsoft.com/fwlink/?LinkId=98349.

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en/configmgrgeneral/threads

• Inadvertently, I downloaded the 64 bit version and need to upgrade the 32-bit version of Lightroom 6.

  Inadvertently, I downloaded the 64 bit version and need to upgrade the 32-bit version of Lightroom 6.

  I go to the download page and I don't see an option of 32 or 64-bit.

  Help, please!   Thank you

  Carlos

  LR 6 is 64-bit only, system requirements

  http://helpx.Adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

  http://helpx.Adobe.com/x-productkb/global/phone-support-orders.html

• I'm reading the data (speed rate and flow) of a table and it plot in a graph.

  I'm reading the data (speed rate and flow) of a table and it plot in a graph. I need to draw two values of l/min (speed) to the same speed. How can I do using a loop for?

  There is no need actually to use a loop FOR this. And using a graphic waveform isn't the type of field for this, for a waveform you a (Start), the dT T0 (greatness not) and table D (Data), this isn't what you want unless you know precisely the measure will take place according to an orderly disposal, you'd want a xy chart so that you can trace the measures where they occur in the axes X and Y of preference.

  

• Why hotmail open now in the 64 bit IE * and not the 32 bit IE *.

  I have a Windows Home Premium 64 bit and now since the update to Windows Live 2011 Messenger and Hotmail run slow crash freeze etc and now Hotmail opens in the 64 bit IE * and Add-ons that I put in the 32 bit IE * (which allows to navigate with and my desktop shortcut is linked to) missing ars. I have had no problems to open anything in hotmail until Windows Live 2011 came along. Is there a way to open up hotmail in the 32 bit IE? *

  Hi IanTVH,

  This can happen due to a startup program that is running in 64-bit.

  Step 1:

  I suggest you double check the Task Manager and see if a program is running that could be 64-bit

  What is the Task Manager?

  Step 2:

  You can also try to perform a clean boot and check if the problem persists.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After you resolve the problem, see the section on boot link to how to restore your computer to a Normal startup mode.

  Hope this information is useful.

• I installed Acrobat 8 Professional 32-bit version and my computer is 64-bit, the program does not run correctly and I want to uninstall the 32-bit version and re-install the 64-bit version, I can't find the download of US feed for Acrobat 8 Professional,

  I installed Acrobat 8 Professional 32-bit version and my computer is 64-bit, the program does not run correctly and I want to uninstall the 32-bit version and re-install the 64-bit version, I can't find US downloading feed for Acrobat Professional 8, any suggestions

  Hello

  Please see below the link to download: -.

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-8-9-product-downloads.html

• Windows 7 64-bit Lightroom CC Web export fails - message says "the original file is missing.  It is a nonsense.  If I use an excerpt from browser, the web page is created without any problem.  I use page preview created as a round work but why don't web

  Trying to export a web page standard, as I have many times before with LR 5.  Now with Lightroom CC web export fails, with a list of images, each original saying file is missing.  They don't miss - all other types of export work OK.  The overview of the web browser works well and I use it as a round piece for the moment.  Please Adobe sort this issue!

  Hugh Letheren

  This problem has resolved itself.  The export feature now works as it should.  I not did something to fix the problem - very strange - but thanks for trying to help everyone!

• Export failed, where is the temp file?

  I'm on version 6 of first.  An export of media has failed in the Middle due to lack of space.  Before export, the hard disk has about 1 GB of free space.  After export failed, the player ends up with 10MB of free space.  I suspect that there might be some temporary files and intermediaries created during the export process.  I checked the output folder and deleted the temp file. But the space has not been recovered.  Anyone else where I should check?

  You work with a single hard drive?

  C drive space http://forums.adobe.com/thread/1007934?tstart=0 see answer 4 for the parameter that you must manually change... and then delete the old temporary files

• Failed to create the required registry key error: 1021

  Hi all

  I have windows 7 professional 64 bit os and tries to install vmware workstation 7 but get this error. I tried to run in vista and xp compatible mode but without success, tried also didn't run as administrator, still no joy. Someone had the same problem and that they were using the same os I tried what they tried, but it has not worked for me which was to run the install with the English - L parameter. Its looks like it worked for them.

  Thank you

  try to create

  HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc.

  before you start the installation manually

  the installation program often mess the permissions for this key

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• How to install the 32-bit version and the 64-bit version of lab VIEW 2014 SP1 in the same machine?

  I want to have both versions because my pc is 64-bit, but he can't function with

  Module LabVIEW Control Design and Simulation

  and

  LabVIEW MathScript RT module

  This funtion two apps with 32-bit lab VIEW 2014SP1

  also, in the forum, I see that it may be possible, check on question number 6

  "Q: I have 32-bit LabVIEW and LabVIEW 64 bit installed on the same 64-bit machine? ."
  A. Yes. »

  http://digital.NI.com/public.nsf/allkb/71E9408E6DEAD76C8625760B006B6F98

  Help, please

  I suspect that most of the facilities of LabVIEW on Windows consists of LabVIEW 32 bit running on an operating system 64-bit Windows (for the most part, Windows 7, 8 and 10).  As you noted, all the toolboxes have 32-bit versions, and many do not have 64-bit versions (although that is changing).  If you don't need the memory of the large model (and have the memory to support), I recommend sticking with 32-bit LabVIEW.  You will have less room for error and Confusion.

  Bob Schrede

• Turn off the requirement of ID and network password

  My Workgroup network has a computer that are not accessible by other computers on the network without providing a user name and a password. We have never set up a password requirement. How to I disable this option? Computer uses XP

  Hello

  a. click on 'Start' and choose 'Run' on the computer that is running Windows XP Professional.

  b. Type "gpedit.msc" in the box next to "Open:" the 'Group Policy' dialog box will appear on your computer screen.

  c. click on the symbol '+' by the Windows settings in the left pane of the Group Policy dialog box.

  d. click on the symbols '+' by the local policies and security settings.

  e. double click on "Security Options".

  f. click twice on "accounts: limit local account passwords using empty for the connection to the console only" in the right pane of the Group Policy dialog box. Accounts: the local account restricts the use of passwords blank to connect to the console only dialog box will appear on your screen.

  g. click the circle of persons with disabilities on accounts: limit local account passwords using empty single console connection to the dialog box.

  h. click on 'OK '.

  i. click on the 'X' in the upper right to close the Group Policy dialog box.

  k. click "Start", select "Turn off computer" and then "Reboot" to restart your computer so the change can take effect.

  For more information, see the articles below:
  How to change a computer name, join a domain, and add a computer description in Windows XP or Windows Server 2003
  http://support.Microsoft.com/kb/295017

  How to use Simple file sharing to share files in Windows XP
  http://support.Microsoft.com/kb/304040

  How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP
  http://support.Microsoft.com/kb/307874

  I hope this helps.

• Where can I find the maximum bit rate for the NI SHC68-C68-RDIO2 cable

  Search on the web site without success - maximum performance measured is an important specification!

  Hello

  in this case, we should look at the whole system. 1082 chassis is large enough for 2 cards. What are the other maps are built into the system?

  The 7021R SMU has in the datasheet of a limit on the transfer rate of data to the SMU Backplane of the chassis, which is 500 MB/s.

  I advise you in this case through the technical sales department. You can reach me by phone or email:[email protected].

  We can discuss the whole of the project.

  Best regards

  Lucia

• What is the maximum bit rate under 5 GHz N-mode for EA6900?

  I just bought an EA6900 and been happy with it so far. As we know, its wireless connection rate is the 600Mbps under 2.4 GHz mode N or 1300Mbps AC 5 GHz mode. My question is, what is "up to" N-mode speed to 5 GHz? What also 600Mbps? I couldn't find the answer after hours of searching on Google. I am not able to reach the ceiling with my devices, but I would like to know more details about my equipment. Thank you.

  The devices can reach up to 450 Mbps regardless of network Mode. But standard-wise, 802.11n clients normally has a live speed of 54 Mbps to 300 Mbps w / maximum distance of 300 m or 1000 ft. For reference, you can check this link.