Export PNG with the correct name, for each layer, script file frame foreach

Similar Questions

• Export issues of sequences with the correct settings for DVD

  Hi - I'm relatively new at first, but working on a project that is very important for me - for the life of me I can't understand correctly export settings.

  I have compiled from home movies of my family in a few sequences for the 60 years of my dad. I worked on these weeks now get cleaned and put all together. In total, it's about 24 hours of footage. These videos have all turned initially on a very old camera video in the 80 and 90 - the kind you actually stuck a VHS tape in. My ultimate goal is to put these or on a DVD (although I guess that's too many images for one), or a drive flash or something of all compiled in one video.

  So far, I got error messages on not enough disk space - so I tried breaking the sequences and exported individually as smaller files. But now, when I export those, all videos come out tiny - the video focuses on a much larger screen, do more fit to size. I studied everything about elongation and corresponding parameters and I tried everything. Of course I do not something good, I don't know what.

  I tried all different export settings, the settings of the sequence, and I thought I was following with the sequence settings, but I guess I'm not. Although I worked on it for weeks, I am out of time. His birthday was yesterday, and I wanted to give her the finished disc tomorrow. This does not seem possible as I am about to give up!

  Someone please help! I would be grateful if someone could guide me through what my sequence settings should be and what my export settings should be and how to get the video output to the correct size for the screen.

  I appreciate your help,

  Danielle

  Time of export will vary widely, depending on at least these factors

  1 - your computer... Processor and the amount of RAM, and is this external drive, USB2 and USB3?

  2. what you change, and effects that you have applied your 718 x 480 video size... is odd, the usual when scanning a VHS tape is 720 x 480, so your video requires 'some much' extra processing

• My workscreen suddenly changed;  picture came from the bridge as a single image;  I have to go to view/ScreenMode/Full with the Menu bar, for each image!    Then when I opened three images, their names do not appear in the upper part.  How to restore?

  How to reset the workscreen in PS CS5 so it happens always full screen with tools, etc.  Mine suddenly started showing only the image on a small frame when I opened the bridge.  I have to slide the wide screen to work;  and then do not show the names of the images I opened.  I restarted.  I quit and reopen PS I did cause it.  How to return to the default I want?

  Has not re - install.  Seemed too complicated.  Fished around with the program and set up a workscreen substitute that works well.  Finally, I update and have it installed by a pro.  Thanks for your help.   Tom

• With the help of "For Each" method in a reusable library ADF application

  I am trying to build a reusable library RSS application from the following options (using JDev Studio Edition Version 11.1.1.4.0 on Windows 2008 Server):
  
  http://blogs.Oracle.com/Dana/entry/reusable_adf_library_rssfeedre
  
  I'm bascially creating the application from scratch, but I'm having problems trying to drag and drop data controls 'text' in the jsff page fragment. That say the instructions "For Each" iterator was used as the operation to navigate through these fields, but I do not see for each appearing as an option for operations anywhere in the data controls. The only options I see are CREATE, DELETE, EXECUTE, FIRST, LAST, NEXT, PREVIOUS, RemoveRowWithKey, SetRowWithKey, SetCurrentRowWithKey. After droppipng controls data and going to the 'links', I see options to use for each no more.
  
  Can someone please tell me how to add for each method according to the above instructions? Thank you!

  For each is a tag ADF Faces (af:forEach), is not a method on a data control (at least this is what I think he meant)

  John

• PLEADING... I NEED help with the boxes, one for each row in table.

  I have a tabular presentation I want to use to process once that will process once for each line that has had its check box selected. I worked on it... It seems... forever. I almost gave up. More than once I thought I had it all to find that I have no work.
  
  It seems always executed once for each row in the set of lines in the displayed table and I care about her contract so that the lines checked.
  
  Here is my select statement...
  Select
  APEX_ITEM. CHECKBOX (2, ISSUE_KEY, DECODE (issue_closed, 'Yes', 'CLOSED', 'No', 'DISABLED', null)) CHECK_KEY;
  TO_CHAR (ISSUE_DATE, ' ' DD-MON-YYYY HH24:MM:SS) FAILURE_DATE,.
  ISSUE_COMMENTS
  QUESTIONS
  
  
  I have a submit button that runs the following process
  DECLARE
  v_org_comments varchar2 (1024): = ";
  BEGIN
  BECAUSE me in 1... APEX_APPLICATION. G_F02. COUNTING LOOP
  SELECT ISSUE_COMMENTS
  IN v_org_comments
  QUESTIONS
  WHERE ISSUE_KEY = APEX_Application.g_f02 (i);
  
  UPDATE PROBLEMS
  SET
  ISSUE_COMMENTS = v_org_comments | » ' || : P4_X_ODF_NOTES,.
  ISSUE_CLOSED = "Yes"
  where ISSUE_KEY = APEX_Application.g_f02 (i);
  COMMIT;
  END LOOP;
  END;

  Hello

  I had the same problem. It seems that if you pass your columns to the columns in standard report it will fire for the checked columns. But if you proceed towards editable fields each line is treated as checked.
  So if you use line selector instead of manually creating check boxes and have a hidden primary key
  field, you can then use something like

  BECAUSE me IN 1.APEX_APPLICATION. G_F01. COUNTING LOOP
  UPDATE

  
  SET
  WHERE =
  APEX_APPLICATION. G_F02 (APEX_APPLICATION. G_F01 (i));
  END LOOP;

• What is the correct format for a single. File ALX for pre and Post 5.0?

  Hello

  We have an application which works fine on the pre 5.0 BlackBerry OS.  We have one ALX file that uses the _blackberryVersion designation to determine what COD files must be installed to which devices.  We do this because we build separate sets based on the device, for example, the version of the storm is more optimized for the storm devices.  It was all working well, but with the release of BlackBerry OS 5.0 OS versions seem to have changed.  Previously, the storm was 4.7.0.x and when the tour came out it was 4.7.1.x.  Now, however, so the Bold 9700 and Storm 2 are the two 5.0.0.x to the less based on the OS versions for the two simulators available right now.  It is therefore impossible to use the name of _blackberryVersion in the ALX file, at least for us, since we have different files COD for the storm, with touchscreen and other devices without touchscreen.

  So, I try to understand what the appropriate method for the use of a single file ALX is in this case.  From what I can tell the _blackberryVersion element uses only the three first sections of the version, for example 4.7.0 or 5.0.0 so even trying to make it more specific would not work and would also not practice for all minor versions that will be potentially different carriers.

  I did try to use the name of the series, for example , and even that would not work.  I also tried with 9500 | 9530 | 9550 and always had an error in the Application Loader saying there is no compatible software.  At first I thought it was due to some sections of with _blackberryVersion and then some with the series.  But I tried a new ALX file with just the designation of series and still no luck.

  Has anyone found how to do this properly yet?  Are there examples of ALX files which series =? Someone at - it examples of work from ALX files that use the _blackberryVersion and the series?

  Before everyone jumps on me, I'm not the real Director of enforcement, I only update the ALX file.  So I don't think it's possible to have a single file of COD to build, but at that time, that never would have happened so I need to find the best solution with different files of COD, that shouldn't be a problem because she supported and described in the documentation.

  If I need to display the ALX file please let me know.

  Kind regards

  David Dewaele, Jr.

  The correct series attribute for 9500 is "Thunder".

  You can find that where she attributes to all here-(for normal installations)

  C:\Program Files\Common Motion\AppLoader\Device.xml search

• Export images with the same name

  Recently when I export my files off LR file picture changes name of 11 27 15 Lopez 03 .jpg to 11 27 15 Lopez 03_.jpg

  Is there a reason why?

  Is it because of the apparent space after my file name between the number of the image and the file extension?

  I don't want that... so try to understand why and how to stop the line of underscores generate

  They said to take the space out of the sequence of name... apparently it fixes

• How to print a PDF file that contains mixed paper sizes (letter and legal) to make my printer choose the correct tray for each page?

  I followed the instructions here:

  Print mixed pages sizes | Acrobat, Reader

  But it did not work!  I use a Mac OSX 10.9.3, reader 10.1.10

  I discovered that, apparently, this plan just does not work on the Mac version of Adobe Reader software.  Thank you, Adobe, for a crappy experience.

• Display names of each layer - currently shows not enough

  In CS5, when entering the names for each layer in the timeline panel, it shows only a certain number of characters. Is it possible to see more characters to see what are the names of each layer?

  Thank you.

  You can drag the vertical bar that separates the names of layer of the timeline (right) in order to expose more layer names.

• I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not display in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not appear in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  You must save the spreadsheet containing the new date as a model format and use this custom template for each new spreadsheet where you want that this date format personalized at your disposal.

• Ran Malwarebytes & two threats were each one with the same name: PUM. Disabled.SecurityCenter. fact that associated with MSSE PUM & the boxes unchecked in MS security Center.

  Original title: PUM. Disabled.SecurityCenter

  I recently removed "patch system" of my Dell computer XP. Malwarebyte s was the only software to do. MSSE caught, but couldn't fix it. I then updated & ran MSSE on my Toshiba - no threats not found. I then ran Malwarebytes & two threats were each one with the same name: PUM. Disabled.SecurityCenter both at the Date of the registry in HKLM\SOFTE\Microsfot\SecurityCenter\AntiVirusDisableNotify & HKLM\SOFTWARE\Microsfot\securityCenterFirewallDisableNotify.  These two have been listed bad: Good (0) (1).  In the Malwarebytes wesite, I read that this has something to do with MSSE. In a commentary, he says it occurs if, in the MS Security Center, the notification "Notify me if my computer might be at risk because of my virus protection software settings" is unchecked.  I then went ahead & check all 3, firewalls, viruses & automatic updates. My computer seems to work well, except that the fan runs all the time (there are a lot of processes running & the CPU usage is very--often 100%, but the computer works fast).

  My questions are: 1) the PUM associated MSSE & the boxes unchecked in MS security Center; (2) should I click on "ignore" in the Malwarebytes scan? 3) was right to check all the boxes in the center of security - "altert me if my computer may be at rist b/c of my xxx software settings?  Thanks in advance for your help.

  PC fan2

  Hello

  (1) is associated with MSSE PUM & the boxes unchecked in MS security Center;

  The following thread might answer this question: http://forums.malwarebytes.org/index.php?showtopic=69859

  (2) should I click on "ignore" in the Malwarebytes scan?

  Yes

  3) was right to check all the boxes in the center of security - "altert me if my computer may be at rist b/c of my xxx software settings?

  Only, run antivirus software at the same time. Firewall must be performed, evil-ware bytes can be run at your pleasure.

• Select the emp with a maximum salary for each hr.emp manager_id

  Hello
  Can someone help me to do this without doing any partitioning or analytical f:
  
  Select the emp with a maximum salary for each hr.emp manager_id.
  
  HR. EMPLOYEES Table Description: =.
  EMPLOYEE_ID
  FIRST NAME
  LAST_NAME
  HIRE_DATE
  JOB_ID
  SALARY
  COMMISSION_PCT
  MANAGER_ID
  DEPARTMENT_ID
  
  TX, all the guys
  Mario

  Hi, Mario,.

  Here's one way:

  SELECT       *
  FROM       hr.employees
  WHERE       (manager_id, salary) IN (
                                        SELECT    manager_id
                            ,               MAX (salary)
                            FROM     hr.employees
                            GROUP BY  manager_id
                                 )
  ;
  

  mario17 wrote: Hi,
  Can someone help me to do this without doing any partitioning or analytical f:

  Do you mean analytical functions?
  Why you don't want to use the analytical functions? Analytical functions, permitting the simpler, more robust and more effective to achieve these results, wouldn't you want that?

• Download app with the same name in appworld for several handsets

  Hello

  I have developed an application and I gt the appworld account. I want to download my app from appworld now. My app supports Blackberry "BOLD", storm and torch curve. But I don't want to make only one application, coz that will increase its size. I want to make it as 4 separate application and download the appworld. But I want to download apps with the same name and features. I want that if a person search for the application in appworld having diff phones, the same name should be displayed, and not just for the bb bold AppName_bold, curves en AppName_curve. It is therefore possible to uplaod app with the same name but different models, while wen someone download the app, appropriate model will be get downloaded in its ph

  You are welcome. On App World, you just download the parent. COD. No need to unpack the parent in the siblings. COD or download files the. JAD.

  Scott

• I have a request for a phone number in my HTML code in my database which is automatically filled with the correct sales phone number when sending emails. I create HTML code in dreamweaver and then put the code in my e-mail program. I need to do the ph

  I have a request for a phone number in my HTML code in my database which is automatically filled with the correct sales phone number when sending emails. I create HTML code in dreamweaver and then put the code in my e-mail program. I need to make the phone number in the clickable query. I know the code to do it well not in a query. What is the code?

  As far as I saw, most of the smartphones will automatically recognize it these days, as long as the number is written in a format of regular phone number. This format also allows to make images or text other than a telephone number in a tap to call the link.

  Looking at what you have presented I guess it would be something along the lines of...

  urmcell>>">urmcell >

  When the location of the link and the link text would be the same variable.

  I've never worked with Intelliclick so above is a wild guess. They would be those who need to ask themselves if there is a way to fill in the address of a link like that.

• Export the configuration information for each group

  How to export the configuration information for each group? (I want to see the information that this group has read or write access to the cube XXXXX)

  By LCM, I was able to export information on groups and users. But no information about its commissioning. can any body tell me how can I get the configuration of shared services information

  We have a utility to do this, or can we get this information using LCM?

  Any information about him will be useful

  Thank you

  The commissioning is under Application groups > Foundation > Shared Services > native Directory > assigned roles > then choose the product / app

  There is a utility command line available if you want to automate the process of execution of export - Oracle Hyperion Enterprise Performance Management System Lifecycle Management Guide, you create the definition of migration file but which can be done by running an export.

  See you soon

  John

  http://John-Goodwin.blogspot.com/