What is the correct format for a single. File ALX for pre and Post 5.0?
Hello
We have an application which works fine on the pre 5.0 BlackBerry OS. We have one ALX file that uses the _blackberryVersion designation to determine what COD files must be installed to which devices. We do this because we build separate sets based on the device, for example, the version of the storm is more optimized for the storm devices. It was all working well, but with the release of BlackBerry OS 5.0 OS versions seem to have changed. Previously, the storm was 4.7.0.x and when the tour came out it was 4.7.1.x. Now, however, so the Bold 9700 and Storm 2 are the two 5.0.0.x to the less based on the OS versions for the two simulators available right now. It is therefore impossible to use the name of _blackberryVersion in the ALX file, at least for us, since we have different files COD for the storm, with touchscreen and other devices without touchscreen.
So, I try to understand what the appropriate method for the use of a single file ALX is in this case. From what I can tell the _blackberryVersion element uses only the three first sections of the version, for example 4.7.0 or 5.0.0 so even trying to make it more specific would not work and would also not practice for all minor versions that will be potentially different carriers.
I did try to use the name of the series, for example
Has anyone found how to do this properly yet? Are there examples of ALX files which series =? Someone at - it examples of work from ALX files that use the _blackberryVersion and the series? Before everyone jumps on me, I'm not the real Director of enforcement, I only update the ALX file. So I don't think it's possible to have a single file of COD to build, but at that time, that never would have happened so I need to find the best solution with different files of COD, that shouldn't be a problem because she supported and described in the documentation. If I need to display the ALX file please let me know. Kind regards David Dewaele, Jr. The correct series attribute for 9500 is "Thunder". You can find that where she attributes to all here-(for normal installations) C:\Program Files\Common Motion\AppLoader\Device.xml search Tags: BlackBerry Developers Can anyone advise on the correct format for indexoptions vbscript? Can anyone advise on the correct format for indexoptions vbscript? I'm going round in circles trying to do things. for example indexoptions.title when you install a vbscript to generate an index I can't find the right object to attach to. There was a book and a Document is open in these attempts have been made: InDesign.ActiveBook.IndexOptions.Title = 'New Index' ' error 438-object doesn't support this property or method "InDesign.Application.ActiveBook.IndexOptions.Title = 'New Index' ' error 438-object doesn't support this property or method" "Application.ActiveBook.IndexOptions.Title ="New Index"' application error 424 object required" "ActiveBook.IndexOptions.Title = 'New Index' ' error 424 object required ActiveBook" "InDesign.Application.IndexOptions.Title = 'New Index' ' error 438-object doesn't support this property or method" "Application.IndexOptions.Title ="New Index"' application error 424 object required" "MyInDesign.IndexGenerationOptions.IndexOptions.Title = 'New Index' ' error 438-object doesn't support this property or method" ' MyIndexDocument.Indexes (1). IndexOptions.Title = 'New Index' ' error 438-object doesn't support this property or method ' MyIndexDocument.Indexes (1). Title = 'New Index' ' error 438-object doesn't support this property or method "MyIndex.Title = 'New Index' ' error 438-object doesn't support this property or method" ' myBook.Indexes (1). IndexOptions.Title = 'New Index' ' error 438-object doesn't support this property or method "MyInDesign.ActiveBook.IndexOptions.Title = 'New Index' ' error 438-object doesn't support this property or method" "MyIndex.IndexOptions.Title = 'New Index' ' error 438-object doesn't support this property or method" "MyInDesign.IndexOptions.Title = 'New Index' ' error 438-object doesn't support this property or method" "IndexOptions.Title = 'New Index' ' error 424 object required IndexOptions" "myDocument.IndexOptions.Title = 'New Index' ' error 438-object doesn't support this property or method" "IndexOptions.Title = 'New Index' ' error 424 object required IndexOptions" "InDesign.IndexOptions.Title = 'New Index' ' error 438-object doesn't support this property or method" "myBook.IndexOptions.Title = 'New Index' ' error 438-object doesn't support this property or method" Any suggestion would be appreciated. Hi Jongware, I guess that's not chrisnaylor error but a typo in the VB removal: In the "local", we can see that this should have begenerationof Index Options: Kind regards What is the release date for Streets and Trips 2012/2013? What is the release date for Streets and Trips 2012/2013? Information about future product releases are usually announced through press conferences and other media. What are the correct for the printer margin settings so that everything is on paper, without truncating them.? What are the correct for the printer margin settings so that everything is on paper, without truncating them.? go to the icon for your printer, go to the page set up, size, A4 sheet? 19.05 mm pitch all sides, mine is set up for this and it seems ok. or what you like Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. It looks like all the files are well intact on the disk. What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk? I entered the following in the "x:\Sources >" prompt: start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows. When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'. How am I supposed to have access to remove the patch? Am I missing something? Perhaps a switch in the syntax to access? Help, please. Thank you. I tried both options that you recommended. As initially stated, no boot option would produce something other than the black screen. I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?. An update, the computer is now fixed. Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start. I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors. That's when I posted the question above after trying to remove the patch in the manner described above. After some time and frustration, I decided to run chkdsk /r c:. It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished. Once I restarted from that, everything came and went very well. So, the original question remains, what was missing in the command to run pkgmgr/high: successfully. And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually? It would be good to know for the future. Thank you! What is the correct URL for the commercial intent tool? I'm in the middle to make a transfer online. I need to know the tool the URL of Microsoft online commercial intention. I like: adlab.microsoft.com/Online-Commercial-Intention/default.aspx I tried Microsoft and a google search... This tool still exist? And if so, where? What is the correct URL? Thanks for your help! This is the site for http://ADLAB.Microsoft.com/audience-intelligence.aspx But when I click on the online commercial intent tool, the page is not found. I would like to use the contact information on this page to see if the tool will be available: Sincerely, Marilyn What is the correct syntax for the use of a variable in an ad-hoc query? If you want to add a unique number to a column, then it would be: What is the best format for scanning for reverse images n & B? I have a few very old 2¼ "X 3¼" B & W negatives, and I want to make of the positive results from them. My question: where should I start? I have a scanner - I guess I'm scanning a negative like any other image, but what is the best format: TIFF, JPEG, PNG...? What resolution - 100 dpi? 300? 600... more? Take a look through these: What is the correct notation for complex variables I need to handle files after download. They are all uploaded in 1 directory by a flash component and then I need to rename them, and move to the directory that corresponds to the choice of categories and subcategories. Now I'm having trouble finding how to get my variables correctly It's the thisFiletoMove1 variable, it must match the destination file in the cffile tag (< FileExists('#request.site.imgupload#\max_#MultiPowUploadFileName_0#') cfif > < cfset thisFiletoMove1 = #request.currentimgid #_max.jpg / > is what gives an error construct CFML invalid encountered, ColdFusion was looking at the following: _max.jpg Then I try < cfset thisFiletoMove1 = #request.currentimgid & "_max.jpg" / > and I get So now I wonder, what is the correct way to do this? Bianca bianca_homedev wrote: I need to handle files after download. They are all uploaded in 1 directory by a flash component and then I need to rename them, and move to the directory that corresponds to the choice of categories and subcategories. Now I'm having trouble finding how to get my variables correctly It's the thisFiletoMove1 variable, it must match the destination file in the cffile tag _max.jpg Then I try So now I wonder, what is the correct way to do this? All are both wrong: You were near. What you meant was probably However, are even better What are the optimal values for mac and arp timeout values Hi guys. What are the best values for 'mac address-table-time of ageing' and "arp timeout" by following scenarios? : -single sg300-10 as hosts Layer 3 - with a maximum of 10 local switch (directly connected) - and a 3750 x-stack with 100 local hosts + hsrp with a battery of the same kind or for asa 5520 as internet gateway for 500 customers? I use now a time of aging mac 300 seconds and a time-out of the arp of 3600 seconds. Is - this okay.? Thank you. These values should be fine. I don't know why the switch is layer 3 since you have of the 3750 and the ASA5520. If you start to see overflow errors, you should consider using the layer 2 switch. -Tom What is the correct value for "simultaneous: GSM enabled. Hi Chris, What is the value for the option of profile: ' Competitor: GSM enabled. Is this 'Y' or 'yes '? It's there for Yes and N for no.. You can refer, please * [How to solve problems when the Workflow Services descend | https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=564394.1] *. * [Services start correctly with the active GSM | https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=391239.1] *. * [Troubleshooting problem Manager Start Up related to the Service Manager competitor | https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=735148.1] *. Thank you What is the best format for burning a cd for use in a car and a stereo? This is a copy of singing me songs that have been copied on cassette and later, somehow in my computer and then burned on a cd - r. I'm just had to get the best quality, I can get! What is the format would be the best to use? The ADC is the format, both can read. Or MP3, you'll get more on the CD. But, the stereo and the car will have to support MP3. Otherwise, the two wont be able to play MP3 . What is the correct process for the construction of webworks + apps cordova with ripple? Hello, I'm developing an application targeting os6 and 7 devices using phonegap and tests through the emulator to ripple. The emulator seems to be missing the package for blackberry in cordova apache mode option. Switching mode webworks brings up the option. However, the deviceready event that cordova expects is not raised in this mode. Therefore, do not start apps according to the deviceready event. Is there something that I am missing? WebWorks and Cordova are two separate web platforms. WebWorks mode, you will be able to imitate WebWorks APIs belay the WebWorks SDK to your content of HTML5 (sign) package in a BlackBerry application. In Cordova mode, you will be able to emulate the Cordova APIs (including the deviceready), however there is no integration with the Cordova SDK for real packaging process. You will need to follow the documentation of Cordova for packaging and signing. What is the correct version for version OA Framework 11.5.10.7RUP Hello Download patch Patch 8751878. Kind regards What is the member limit for BSO and asked ASO to 11.1.2.2? Hello Please see the documentation from the link below: Topic: http://docs.Oracle.com/CD/E17236_01/EPM.1112/esb_dbag.PDF ASO: Please see: Page 1048. I hope this helps! Kind regards When I try to log in I have cloud using my apple ID, it says I can't connect, the number of maximum of free accounts have been enabled on this phone. I DON'T KNOW HOW TO MAKE IT MORE OBVIOUS. IN FIREFOX, I NOW I HAVE THE SPELLCHECKER. IN THE NEW FIREFOX I DON'T HAVE, I HAVE FAILED TO LOAD AND USE 'DICTIONARIES,"WITHOUT SPELL CHECKER THAT TAKE FORFUCKINGEVER FOR USE. I DON'T WANT THE LATEST VERSION NB200 - can I change the operating system? Hello. I have a Toshiba NB200 and Windows 7 starter. I would like to change the operating system, and he wanted to know who I can install in this mini portatil. Also if after changing the operating system, the warranty is lost. Thank you for all! Hola como estan... I need control the animation of este lvdt... is q quiero q cuando llegue a ultima foto... to run ahy... no empiec of nuevo... ahy editor vi... espero me help pronto... Gracias, ahh I need q me h. con el launch me works run continuo Windodows Live Mail unable to send pictures Sounds like a common problem. When the transmission of the images I get "one or several pictures in this message could not be found.» Photos will not be included. Of course you want to send msg? I was told to make sure that all of the updates were upSimilar Questions
Kasyan
You can continue to monitor the Streets and Trips here site: http://www.microsoft.com/streets/en-us/default.aspx
http://ADLAB.Microsoft.com/online-commercial-intention/
http://ADLAB.Microsoft.com/contact-us.aspx
I'm a casual user of the DB and right now need to update the records about 1000 + so that a certain column gets a unique value.
So I thought I'd use a variable for this.
Then, I built this type of SQL statement for only a small subset of records:
----------
variable number recNumber;
exec: recNumber: = 1;
UPDATE TABLE_TO_BE_UPD
SET COL_TO_BE_UPD = COL_TO_BE_UPD + recNumber
WHERE COL_TO_BE_UPD IN ('VAL_A', 'VAL_B');
----------
I get invalid SQL statement error when you try to run above (except for the guest who asks for a value I want to omit).
In any case, I also tried this one:
----------
CREATE SEQUENCE seqCounter;
UPDATE TABLE_TO_BE_UPD
SET COL_TO_BE_UPD = COL_TO_BE_UPD + seqCounter.NEXTVAL
WHERE COL_TO_BE_UPD IN ('VAL_A', 'VAL_B');
----------
Of it, I got the error ORA-01722: invalid number... I guess it's because seqCounter is of type number and the COL_TO_BE_UPD is of type character... (?)
Then I want to ask is what is the correct way to define and use a counter variable type to add a number at the end of a string?
Also another question I would ask is that are variables that are used in queries ad hoc, also called "bind variables"?
Thank you muchly
UPDATE TABLE_TO_BE_UPD
SET COL_TO_BE_UPD = COL_TO_BE_UPD ||to_char(rownum)
WHERE COL_TO_BE_UPD IN ('VAL_A','VAL_B');
< cffile action = "Rename".
source="#request.site.imgupload#\max_#MultiPowUploadFileName_0#".
destination="#request.site.imgupload#\#request.currentimgid#_max.jpg" >
< cfset thisFiletoMove1 = #request.currentimgid #_max.jpg / >
< / cfif >The C:\websites\beta.antiek.net\demo\galleries\test\thisFiletoMove1 source specified in the cffile tag is not valid
source="#request.site.imgupload#\max_#MultiPowUploadFileName_0#".
destination="#request.site.imgupload#\#request.currentimgid#_max.jpg" >
The C:\websites\beta.antiek.net\demo\galleries\test\thisFiletoMove1 source specified in the cffile tag is not valid
Please mark replied messages useful
' Competitor: GSM enabled.
Is this 'Y' or 'yes '?
Can someone give me a link to the 11.5.10 docs that show this?
* [How to set the simultaneous Option profile: GSM enabled for N using AutoConfig | https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=391240.1] *.
Anchorage :)
http://Cordova.Apache.org/docs/en/3.1.0/guide_platforms_index.MD.html#platform%20Guides
Can you please suggest me which is the correct version of jdeveloper, I used version.
OA Framework 11.5.10.7RUP
Oracle Applications Extension 9.0.3.8.13 - build 1570
Business 9.0.3.9 components
UIX (Cabo) 2_2_24_5
BiBeans Runtime 3.1.0.82 no Debug BI beans 3.1.0.x
MDS 9.0.5.4.89_562
XML Oracle XDK Java 9.0.4.0.0 Production
Object Applications AOL/J, Java Core Library roll up Patch J
Servlet 2.2
Java 1.5.0_20
Driver JDBC 9.2.0.8.0
Database Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
SunOS 5.10 operating system
Browser Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0)
Kind regards
Adhi
GYAN
I need to know what is the maximum member limit requests for BSO and output 11.1.2.2 ASO (which means that the maximum number of members can we have in the outline for BSO/ASO). Also, I need to know what is the maximum limit membership to a Hyperion Planning application?
We are planning on creating a hyperion, planning an application that could be partitioned with ASO (target). Could you gurus please tell me is it possible? I know that oracle does not support and recommend this right now.
Thank you
Database of global storage limits
Block storage of database limits
For the BSO: Please see: Page 1050.
PriyaMaybe you are looking for