I can't install my printer HP PSC 2355.

Similar Questions

• How can I install a printer bluetooth as a restricted user?

  How can I install a printer bluetooth as a restricted user?

  Windows does not allow installation in limited user mode.
  However, there is a solution that can meet the needs described here:
  http://APS2.toshiba-tro.de/KB0/HTD9602MN0000R01.htm

• Can I install the printer HP Deskjet 3050 (J611 series) has on an Acer Aspire one notebook without the disc

  Can I install a printer without the software disc? I have an Acer Aspire One 722 who doesn't have a hard drive. I just got an HP Deskjet 3056 A (J611 series) that only shows set up with a disk. The laptop has Windows 7 Home Premium - 64 bit OS - 2 G. Is there a way to download the software & configure the printer? I'd appreciate any help I can get. Thank you.

  Hello

  Yes, please download driver from following link (note: same for all):

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?TaskID=135&prodTypeId=18972&prodSeriesId=4311836

  Kind regards.

• Can not install the printer driver. Error code 0 x 0000490.

  I have Windows Vista and I have a printer HP 3512. For some reason, I can not install the printer and I keep getting an error 0 x 0000490. Help, please?

  Moved from Vista to install, upgrade and activate Forum.

  Hi Courtney,

  Please contact the Microsoft Community.

  I'd like you first try printing HP and doctor Scan.

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146

  After that, I would have you to refer to this article-

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=5241114

  We know if that helps your cause.

• New hard drive installed Vista Ultimate, now I can not install my printer - why?

  Computer Dell laptop hard drive replaced (warranty) with Vista Ultimate, I installed Office 2007 Professional disc 1 fine, windows update is fine, but I cannot complete the installation for my Kodak printer disc. Has been given the Internet to install via the internet address - link doesn't work either - drive flashing green bar "installation preparation" then nothing? Link Web shows 'Preparing to install' with a full bar green - then stuck there. A few minutes later, he disappears. Never installed. Do not open the drive or cross the bar - never open the Green window to install. Support Kodak decided that I was missing the .net on pre-installed OS HDD framework files. Enough of 3.45 and 4. Is this correct? Do I need previous versions, or something else is the cause. How can I check to see that all the files are correct and understand WHY I can not INSTALL MY PRINTER?

  Until the hard disk, memory & the keyboard have been replaced by the Dell tech, I had installed and printed on this Kodak printer for 9-12 months. Suggestions welcome.

  Hi LSMama,

  (1) you get an error message?

  (2) what is the model number of your printer?

  There could be several causes for this problem, try the following steps:

  Step 1: Run the troubleshooter printer available in the link below and then check

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Step 2:  Clean boot the computer and then try to install the printer

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• why I can not install my printer hp to my hp chromebook?

  I have a deskjet printer all in one, and I just bought a hp 14 chromebook.  How can I load my printer to my computer?

  You will need to set up your printer and use Google Cloud print.

  A Chromebook has Google Chrome OS.  You can install apps and extensions store web of Chrome, but you can't install driver printer and utilitarian as you can do with a laptop or PC Apple or Windows.

• I can't install a printer driver for my epsom SX425W

  someone help, I can not install a printer driver for my sx425w on my Lenova g560,.

  Hi Brian,.

  1. what happens when you try to install?
  2. do you get an error message?
  3. are you able to install any other programs?
  4. you try to install Epson printer CD or downloaded file?
  5. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Download the drivers from the following link:
  http://www.Epson.co.UK/GB/en/viewcon/corporatesite/products/mainunits/support/3842

  Post us the results once you try the steps above.

• Can not install the printer driver that nothing works

  I have a new HP 1102W and brand new emachines running windows 7 and I can not install the printer driver up constantly mistake spent 2 hours on the chat online with an HP technician.

  Try the drivers for the LJ 1100. Use the Add Printer Wizard and choose to install the Windows update driver.

  Tom

• why I can not install my printer driver on this computer laptop w/windows 8? I have the lexmark disk.

  I can't install the printer driver for my printer lexmark 2300 on the my new HP laptop with windows 8.  I have the lexmark installation cd.

  Hello

  Probably the CD was born before Windows 8 is why he knows nothing about this product "nice". Please visit the following site. Hope that your printer is still the list:

  http://support.Lexmark.com/index?page=content&ID=OS27&locale=en&UserLocale=en_AU

  If so, you can download driver from here, it is a product of Lexmark.

  Kind regards.

• I can't install my printer, please help me.

  I got this printer last year and it was only 8 months old at the time.  I just got a laptop this week and tried to install this printer and it won't.  I have a Hp Deskjet 3050 all-in-One J610 series.  My laptop has Windows 8.  Please help me to install this printer, really, I don't want to buy a new printer and I just bought ink and opened it up too.

  You can buy a USB cable for printer to PC to any PC, including a best buy or Wal-Mart store. The following image shows what should look like at the end and the price of Amazon.com. Note the red X, I put on those who have the wrong connector type.

  

  To set up the printer without a USB cable use the full features of software download and the pilot. During the installation process there is normally a step where you are asked what type of connection you have.  This would be where you would choose wireless.

• LOST MY HP PHOTOSMART INSTALLATION SOFTWARE, HOW CAN I INSTALL THE PRINTER IN ANOTHER MAC?

  Hello

  I ALREADY HAVE A PRINTER OF HP PHOTOSMART MORE, BUT I LOST MY CD FOR INSTALLING SOFTWARE. I JUST ACCUIRED A DIFFERENT MAC AND I WANT TO INSTALL THE PRINTER ON THIS COMPUTER.

  WHAT CAN I DO TO INSTALL IT?

  Kind regards

  JAIME

  Hi Jaime,

  What you can do is to go on the media and the area of drivers from the Hp site by following the link http://www8.hp.com/us/en/support-drivers.html

  -Just type in the Version of the Photosmart you have and who follow a Version of MAC OS that you use

  -you want to do from the computer that you are wanting to install the printer on.

  Just download the driver and install and that should help you to get this printer set up on this computer as if it was the drive itself

• I get a "cannot install printer because a policy has been enabled on your computer that blocks NT 4.0 driver ' how can I install my printer?

  I have a HP Pavilion dv6500 running Vista 32 bit. I just bought a new printer, a HP Photosmart C4640, when I tried to install and connect I get a message indicating that it cannot install printer as a policy has been activated this block driver NT 4.0. I have run all updates of software and drivers, but still get this message. I've been at this for almost a week now. I've been doing the HP race with regard to aid. I am VERY fusturated at this point and desperately need help. What should I do to make this work?

  Hi jessheffernan2003,

  This problem occurs because Windows Vista does not support the installation of kernel-mode printer drivers. Windows Vista only supports installing user mode printer drivers.

  To work around this problem, try to get and install a printer driver as a user on the Windows NT 4.0 computer. If you can not get the particular user mode printer driver, try to get a driver printer in user mode compatible with the kernel mode printer driver which is hosted on the Windows NT 4.0 computer. To get a printer driver updated for the print device, contact the manufacturer of the printer.

  For more information about your hardware manufacturer, visit the following Web site:

  http://support.Microsoft.com/GP/vendors/en-us

  Note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  For more information, see the link below:

  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.

  http://support.Microsoft.com/kb/931719/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have can´t install any printer driver

  I am having a problem when I try to install the Brother printer driver 8890 dw and displays the error message "WINDOWS COULD NOT INSTALL the PRINTER DRIVER in KERNEL MODE", this happens for any driver I try to install, I checked and the printer is compatible with windows 7 on my other computer works normally.

  Hi Lucas,.

  We will analyze and identify the cause of the problem.

  Some of the kernel-mode drivers are not supported in Windows 7, because kernel-mode drivers could allow Remote Code execution.

  In addition, when a kernel mode driver is corrupted, it blocks the entire system as opposed to the user-mode drivers. Please see the link below for more information

  http://www.Microsoft.com/technet/security/bulletin/MS09-065.mspx

  You can install the driver that works with Windows Vista, in Windows 7 by Windows compatibility mode.

  Download driver article.

  http://www.brother.com/E-FTP/windowsvista/us.html

  a. connect the device to your computer and scan for the device in Device Manager.

  b. right-click on the executable/program of the driver installation file, select Properties and select the compatibility tab.

  c. click the checkbox in front of the option run this program in compatibility mode for and select Windows Vista from the drop-down list. then try to install the device driver.

  For more information about executing a program in compatibility mode, see the following link.

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  See also the steps mentioned in the article.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/97ffa9af-92fa-4493-93a4-e4dc700e4192/im-trying-to-install-our-printer-driver-on-Windows-7-Professional-32-bit-and-getting-driver

  Hope this information helps. Response with status so that we can help you.

• I can't install my printer its says no driver for lexmark x 1100

  I can't install my lexmark x 1100 printer it says I have no driver

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Can I install a printer in XP Mode XP driver? If so, can I use Win 7?

  In my home network, I have a printer Minolta QMS Magicolor 2200. A 64-bit for this printer printer driver is not available. I have a Dell with Windows 7 Pro computer and I installed Windows XP Mode. Installation of XP to Win 7 printer driver may damage the computer. Is it possible to install the driver in XP Mode XP, without damaging the computer? If possible, it is possible to use this printer Win 7 driver?

  You should be able to install the printer in XP mode, if XP can connect to the device via a serial port or USB port.  A parallel port might work as well, but I've never tried myself so no way for me to say with certainty.  But no, Windows 7 will not be able to use the printer because you still need Windows 7 drivers for print to the printer, even if it is shared on the network of the virtual machine.