Export QT Cineform has failed
Hello
I am running windows 8.1 and CC 2015.
When I try to export a cineform QT I get error thefollowing:
The trial for the Codec in Quicktime Cinform period has expired. Please Contact Cineform press to activate the software. (Invalid activation code)
I thought that the Cineform is included in the 2015 CC editions?
Another thing:
When you select the AVI in the 'Create output window' blocks SpeedGrade
No idea how to solve these problems?
The best
Menno
When your message is right, just went to check things and my Cineform exports did not work either, because of the failure to load or whatever. GoPro some of their product lines, changed some of the things that 'old' by is no longer attainable. So... After poking around a bit, I advanced and downloaded the freebie below of GoPro, as a replacement for the earlier GoPro gift, I had, and on this installation, my Cineform has been suddenly export again...
http://shop.GoPro.com/softwareandapp/GoPro-app-|-desktop/GoPro-Desktop-App.html#/start=1
Neil
(And thanks for catching that!)
Tags: SpeedGrade
Similar Questions
-
Hello, I have reinstalled Windows on my computer because my hard drive has failed; However, I get a message that my export key is not valid.
Have you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
(KB972145) Recommended (KB2563894) IMPORTANT (KB968930) recommended and updated for (KB968930) everything has failed.
I tried for days now to download these updates, but I did not, even in SafeMode with networking, I can't get Windows update to try to install?
I tried a few solutions of Microsoft, but I can't like Regedit HKEY_LOCAL_MACHINE thereupon, after export the keys, that I didn't see any (PendingXmlIdentifier) and so on, so I can't go any further, I got arrested and decide to ask for help.
If you can help me, it would be great!
Hello
· What is the error code that you receive when the update fails?
· What are the other steps you've tried?
Method 1: Reset windows update and install the updates.
You can read the following article to reset the Windows Update components and see if it helps.
-
Now, I'm trying to access the TMIB service by shaking as a result of this article http://wenku.baidu.com/view/fe071e628e9951e79b89278d.html
Some parts are in Chinese, but you can guess what he says.
The problem is, after the bottom of the article, I have this error in the console: bea.jolt.ServiceException: data conversion failed. Check the log file
In the log file, I find
Fldid32 (TA_CLASS) has failed. TMIB: LIBFML_CAT:8: ERROR: unknown domain name. Maybe FIELDTBLS32 is not properly defined.
What I put in the environment variable is
FIELDTBLS32 = tpadm, Usysfl32, evt_mib; export FIELDTBLS
FLDTBLDIR32 = $TUXDIR/udataobj; export FLDTBLDIR
So what's the problem with my setup?
Hello
Not sure if it was a mistake to cut + paste on this forum but export declarations are missing "32" at the end:
*******************************
What I put in the environment variable is
FIELDTBLS32 = tpadm, Usysfl32, evt_mib; export FIELDTBLS
FLDTBLDIR32 = $TUXDIR/udataobj; export FLDTBLDIR
*****************************
They must be:
export FIELDTBLS32
export FLDTBLDIR32
Kind regards
Bob Finan
-
I'm trying to migrate all my email from Thunderbird to my Google Mail account. I have my old email into local folders, and I have my Google email account set up successfully as an IMAP account. I'm dragging E-mail folders under local folders to folders in the title of the IMAP account.
Sometimes it works fine, but most of the time, I get an error "the current command has failed. The e-mail server for account [email protected] replied: not able to analyze command. "I can often with success select and drag 30 messages, but sometimes it fails with even a single message.
Any suggestions?
Several suggestions.
1 turn off email scanning in your anti-virus product against struggle.
2. create an exception in your anti virus for Thunderbird profile folder.
These two just release the process and remove barriers to the process.
3. check the amount of data you have used for 24 hours. Google have a limit. about 200 MB I think. But I can't really remember. -
Sending the username and password has failed. Need help!
I was denied the opportunity to send messages. Received a notice: "the sending of username failed. Mail server mail.comcast.net answered the authentication has failed. What to do? I don't know what happened. I could send and receive yesterday. Please notify.
Post your troubleshooting information for your server settings can be examined.
Helps in the menu. Troubleshooting information. Clear the check box to include the account names. Then click on copy to the Clipboard. Come back here and paste in a window of response. -
This morning my password has failed, though even I nothing changed
I'm unable to access my email account. I get the following message: send password for user Purpnet has failed. Mail server pop.verizon.net responded: authentication failed
I have nothing to engage this failure. Can you help me?
Since I can't access my e-mail, please respond to [email protected]
Thank you.
We respond to the address that you specify in the forum.
Please send your account settings to correct information in the Help menu. I guess that Verizon finally extinguished some inherited settings that have not been updated, which is the usual cause anyway. Or your anti virus is having a spasm, but lets try easy things first.
-
My T-bird was working fine last night but this morning I get an error message starts "the RETR command has failed..." "whenever I try to retrieve new messages (he tells me there are 23 of them), I get this error message. I use the version above on a Windows XP machine running.
No one here has the ability to do anything to your email address. Your email provider was just having a bad day and it is corrected now.
-
Hi all
I'm completely ignorant when it comes to Apple Script and I'm trying to get this simple script to work. The purpose of the script is to save attachments in a folder named when I run on the Apple Mail messages via a rule.
This is the code:
Tell application "Mail".
theMessages set of selection
Repeat with thisMessage in theMessages
the value of the theAttachments attached to a letter of thisMessage
Repeat with thisAttachment in theAttachments
the value theAttachmentFileName ((chemin d'accès àle texte riche de la règle de type dossier de départ) & ' treatment of the Documents record: Hazel ") & name of the thisAttachment
Save thisAttachment in file theAttachmentFileName
end repeat
end repeat
tell the end
The folder does not exist, but I get a "error " Mail has been a mistake: AppleEvent Manager has failed. ' number - 10000 "when I run.
The code in the Script Editor editor also inserts "type of rule" in my code, so I guess that my syntax is faulty.
Any help would be greatly appreciated.
Kind regards
Beem
If ' folder of treatment of Hazel ' already exists in the Documents folder, the following script of GUI, which seems to work perfectly under OS X 10.11.3, should do what you ask for:
Try
game of theDestinationFolder to ((path to the documents folder) as text) & "Hazel treatment record" as alias
on error - file does not exist
return Beep 3
end try
say application "Mail".
activate
the value theMessages to the selection
Repeat with thisMessage in theMessages
thisMessage Open
say application 'System events' to say process "Mail".
click on menu item "Save attachments...". " of 1 of the 'file' menu bar item menu of the menu bar 1
Repeat until sheet 1 window 1 is
end Repeat
key sequence "o" using { control down,shift down}
key sequence "Nutty".
click on button 'Save' of the sheet 1 of window 1
Repeat while sheet 1 window 1 is
end Repeat
key sequence 'w', using {control down} - close this message
end say
end Repeat
end say
-
the application has failed to start because its side by side configuration is incorrect
I downloaded the new firefox and when I try to open it I get this message that the application has failed to start because its side by side configuration is incorrect
Seems to be caused by a corrupt installation of Visual C++ (several versions can be installed-by-side).
You can try to use the sxstrace tool to see if you can find which files are missing or damaged. -
Qosmio X 500-10T - integrated controller has failed
: The embedded controller (EC) has failed in the specified time-out period. This may indicate that there is an error in the EC hardware or firmware or BIOS is accessing the EC incorrectly. You should check with the manufacturer of your computer for an updated BIOS. In some cases, this error may cause the computer to function properly.
Hi all
Now, I get an error very very annoying.
Qosmio X 500-10T is freezing with more frequency with the message above in Event Viewer.
I reinstalled Windows 7 to factory settings and added all fixes Windows 7 etc with no luck to solve the problem.
I also installed last BIOS update.
Any ideas what to do?
Thank you.
Hey Buddy,
I agree with the user above. If you have already reinstalled Windows 7 back to factory settings and installed the update to the newest BIOS, it seems to be a malfunction of the equipment. In this case, you need professional help from an authorized service provider:
http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service providerIf your laptop is under warranty, the repair process is free for you. :)
-
We found no boot disk or startup disk has failed?
OK, so yesterday my wireless mouse is broken, I restart my computer to get it to work again. When I did, it has not fixed my problem, so I went online to see some solutions. When I went on a secure site, I got an alert on my computer and something about 2 programs being completed. It seemed was going to turn off the computer, and in a panic, I turn it off. When I turned it back on, it went straight to the verification of the startup disk. And it gives me the message: no boot disk was detected or the startup disk has failed. I got it a couple of times before and all I ha do turn off two or three times, and he'd turn out normally. It won't work, and I tried several ways to remedy. I clicked on F2 and F8 a F11, but nothing works, and I do not have a cd with media recovery settings. Any help would be appreciated.
When you request support, please provide the number of name and/or product of comprehensive model of the HP computer in question. HP/Compaq made thousands of computer models which are all different. Without this information, it can be difficult, even impossible to help you solve your problem.
Turn on your computer and immediately start typing the appropriate key 'F' to run the hardware diagnostics or system on your computer. Then, run the hard drive test and report the results. If the hard drive has failed or is about to fail, you may need to replace the hard drive. If the hard drive is reported as 'OK', the boot sector, or the hard drive was damaged and the operating system must be repaired or reinstalled.
You may need to use your HP recovery disks to solve each problem above. If you create your personal series of HP, as suggested by HP recovery disks when you configure your computer... you will need to order a series.
Please send BRAVO
-
I have a terabyte external drive that I use for backup with Time Machine. When I restarted my iMac this morning there was a mistake that OSX could not write the disk. It is said that he can still read, but not write (plenty of space on the disk). I tried to run disk first aid on the disk but it completely after about a minute and said: 'first aid process has failed. If it is possible to backup the data on this volume. Click OK to continue. Details on the error message include:
Check the file catalog.
Invalid key length
G volume could not be verified completely
File system check exit code is 8
...
File system check or repair a failure.
Operation failed.
Is there anything else I can do, or the drive is now a paper weight?
It seems that the file system on the external drive is messed up.
(1) you can try a more powerful file system recovery tool.
Perhaps Disk Warrior has the best reputation for this:
http://www.Alsoft.com/DiskWarrior/
(2) you can reformat the drive with disk utility
How old is the drive? You can think to replace the hd in the case of the external drive. It is usually a fairly simple process. Remove the drive encloser to understand what type of connection of the disk is used.
-
A HARD drive has failed in a RAID1
I have an IX2 - dl and 2 X 3 to disks configured as RAID1. I received notice that one of the drives has failed. Instead of replace the failed drive, I want to 2 X 4 to also be configured as RAID1. I know how to install the disks and all that. I was wondering if I could still read that the content of the working group still 3 TB drive in a PC?
Hello tangwong,
Here are a few links to knowledge base articles that should help you:
https://Lenovo-na-en.custhelp.com/app/answers/detail/A_ID/32099/kW/upgrade
https://Lenovo-na-en.custhelp.com/app/answers/detail/A_ID/30797
https://Lenovo-na-en.custhelp.com/app/answers/detail/A_ID/30456It is not really possible for the average user to mount these disks on a PC and read because there is a firmware on the disk partition and file system is based on Linux.
-
RALink - network - 802.11n/b/g Wireless LAN USB 2.0 Mini adapter 379ko
Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error."
I bought a wifi USB adapter and it is a driver windows 7 available on the manufacturer's website. RALink
http://eng.ralinktech.com.tw/support.php?s=1
My computer is a HP P6110f desktop computer. It came with a Vista 64 OS which I've upgraded to a Windows 7 Home Premium.
I tried to install all kinds of different ways but were not able to make it work.
Disconnect all other devices driver/software uninstalled and reinstalled all plugging adapter in each computer startup I tried port USB with adapter connected and also connect after windows load discharged from all applications running, including firewall and anti-virus
Can you please help me solve this problem? I consider myself quite computer but I'm completely puzzled here.
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Windows 7 discussion groupsThey may be able to help in obtaining the wifi USB adapter to work.
8007001F (a device attached to the system is not functioning) TaurArian [MVP] 2005-2010-implementation to date of Services
Maybe you are looking for
-
Maintenance of the Cybershot RX1002
Does the RX1002 need annual maintenance? I'm going on a trip to Tonga to photograph whales and hold my camera in great shape. Do I need to repair the camera? Thank you Sandra
-
synchronize S 6110 PCI and PCI-6250 M series
I would like to sync between a 6110 S PCI card and a PCI 6250 M acquisition. The first question is: do I need a RTSI cable to connect two devices? Is it possible to use a single analog trigger (sent to channel the PCI6110 PFI) to start the acquisitio
-
the software installed on the line for my desire 4520 and gone with no hitchs on my Mac Book pro 15. printer works fine. No analysis at all. I have latest software loaded to update and rebooted the computer and the printer. message on the compute
-
Just got a rocket Go 8 - bit problems
Hi, as the title says. Just got it out of the box and plugged directly on my computer to charge it up. It turns on fine, changes in 'Writing' to 'Connected' and yellow signal shows on the load screen, and the battery starts to blink. After about 3
-
Director with piano media player error
I have been using an application of the lesson of piano since October. All of a sudden it has stopped working and says "player Director, object expected error" and then "expected for the Manager, list #getaProp.»I tried to reinstall and also restart