We found no boot disk or startup disk has failed?

Similar Questions

• We found no startup disk or disk has failed.

  Hello, in Windows 8, I get the error... We found no startup disk or disk has failed.

  I get the message each time that Windows 8 is an update.

  Thank you

  Hi, Martin,.

  Is this an upgrade or have you bought a new computer with Windows 8 pre-loaded?

  Start your PC and go into BIOS and select Diagnostics F2 and run the hard drive diagnostics test.

  Alternatively, use these free tools to test the hard drive

  http://pcsupport.about.com/od/toolsofthetrade/TP/tophddiag.htm

• Startup disk has failed - what are the options for replacement

  I have a Dimension 8400 BIOS A05 running (if I can remember you corrrectly). The SATA C drive supplied with the system crashed recently and will no longer start up. I tried various diags, but they all fail. I also had a USB drive adapter to try to access the drive from another computer... the disc turns, but I do not see the drive.

  I want to know what constraints and options are there in the choice of a replacement drive? (I wonder if I am limited on ability. The original drive is a WD740GD-75FLA1 (74 GB). Could I replace it with a SATA capacity more (I don't mind if the replacement is a WD drive again or not.)

  And, keeping in mind the BIOS, I must update that when I replace the HARD drive?

  In addition, this good old machine still runs XP SP3 and I plan to switch to Win 7 at the time of the installation of the new disc. Points to consider regarding the choice of the player?

  BTW - some time after the purchase of this PCI added a second drive hard - one 250 GB SATA drive. Do I need considered as in the choice of the total capacity of the disk online, I will be once the new drive arrives? Oh, and although I don't speak of this second disc - it works fine with the USB adapter so my problem looks like most likely to be a disk problem rather than say, a question of power cable or block.

  Thanks in advance for your comments.

  Andy

  Any standard desktop SATA drive under 2 t fine - having said that, what you have now is a WD Raptor 10 K RPM drive.   They are now called Velociraptor - if you are looking for this level of performance of the player, they are the only SATA 10 K rpm disks designed to use desktop.

• A6700y hard disk has failed, I can buy a new drive, but where can I get a disk to re - install

  My computer did not come with an installation disc and I have no recovery disk. I want to buy a hard drive more for Vista 64-bit, but want to know where to buy a disc re - install or restore the disk to install the old system on the new drive... Thank you

  Yes, a new tough guy of the same size and a set of recovery discs should fix you all this.

  Frank

• Reinstall the premier 11 elements after the original installation disk has failed. Error 1327.Invalid Drive

  I'm trying to reinstall Adobe Prime Minister 11 elements of DVD on a 64-bit Windows 7 system.  The player who welcomed my original instance failed.  It was installed on a secondary drive, E that, unfortunately, is no longer with the system.  In the resettlement process I'm removing the original instance, as seemes to be mandatory, but I enconter error "Error1327.Invalid Drive: E:\'." "

  How can I get Adobe Prime Minister 11 items on my system?

  Note: A similar problem with Photoshop Elements, except that none of the errors are detected, it just will not start as he seems to have pointers to the failed drive.

  I used CCleaner to clear up any reference registry for two installations of problematic items, and I reinstalled the.  There was a lot of entries, but they were all marked as problems by the tool, as they were easy to find.  Thanks, Mylenium.

• Dell E7250/processors E7450 and controller - McAfee Endpoint Encryption, no boot disk

  Hello

  I hope someone can help with the problem that we have.  We bought several E7250 and E7450 processor and portable computers controller, which we managed to set up with our brand, but when applying v5.2.12 of McAfee Endpoint Encryption, the next reboot an error at startup

  ' Error: 0xe002001b '.

  We found no boot disk ".

  We have applied this version of EEPC for all our Latitude previous models, without posterity, it's just this new model range.

  We tried imaging using AHCI and RAID, another does not change the result.

  If someone has an answer to that, we would be very grateful.

  TIA

  Darren

  We just bought some 7470 models and encountered the same problem with our McAfee encryption server. Not sure if this is related, but that's my dose. I worked on it for hours with our custom and same image image pre-installed OEM. Still, a fatal error after encryption. I tried downgrading and upgrading the BIOS.

  As a last effort of sigh, I changed the BIOS settings SATA Operation to RAID on AHCI.

  Now, all laptops E7470 start perfectly. I hope this helps.

• ERROR: no boot disk was detected or the disc has failrd

  HP ENVY h8-1534pc with windows 8.

  error: no boot disk was detected or the drive failed.

  tried to run the recovery cd ROM even error. No cd or hard drve no indication in the boot order.

  out of resources

  Hello! Here are a few responses from members of the forum about your problem. See if you can find a solution from them. http://h30434.www3.HP.com/T5/forums/SearchPage/tab/message?filter=labels%2Clocation&location=Forum-Board%3AOSandSW&q=no+boot+disk+has+been+detected

  Dokie!

  PS It doesn't look good for me. Good luck and thanks for posting back.

  It has been my experience in the past that a message as this means that either the operating system is corrupt or your hard drive is dead. If your hard drive does not show in the boot order, it's a major sign of a bad HD, but not100%.  There are several free testers HD. Most have the back, which means that you don't have to have an operating system to start their. If you are not able to test your HD with F2 or F11 functions, try one of them. You will need to burn an ISO to a CD file.

  http://pcsupport.about.com/od/toolsofthetrade/TP/tophddiag.htm

  PS2 there may be answers best of the latter. Weekends are slow at times. I'm still slow

• logon error: Hphmon06.exe could not be located. the application has failed to start because hpzjrd01.dll is not found.

  Original title : I get... suite msg on logon: Hphmon06.exe not found in windows xp.  the application has failed to start because hpzjrd01.dll be found.

  Someone else already has this nagging and ongoing problem?  How to solve this?

  glenkelly,

  If you are just wanting to get rid of the annoying popup, try the following steps:

  -Click on the Start button
  -Click on run...
  -In the "Run" dialog box... ", type: msconfig
  -It will jump to the top of the window "System Configuration"
  -In the window "System Configuration", select the tab "start".
  -In the first column (startup item), Ahmed to the bottom of the list and search for "Hphmon06.exe."
  -(Ex: «Startup Item»---«Hphmon06»)
  -If you are unable to locate this name, expand the column "order."
  -In respect of the 'Command' column, scroll down and look for the path 'Hphmon06.exe '.
  -(Ex: «Command»---«C:\Program Files\Fichiers Files\HP\hphmon06.exe»)
  -Uncheck the question to the left of the box, and then click 'OK '.
  -More than likely, a box will appear asking if you want to "Reboot now" or "restart later".
  -Click "Restart now" and see if the popup box boring will disappear when you connect!

  -Riley

• no boot found device, insert the boot disk and press any key

  Hello, recently tried to install Windows 10 through the Assistant Boot Camp, with the help of a DVD I bought windows. But I get an error saying "no devices found Boot insert boot disk and press a key" I tried to read and do all the patches, all offer and yet no results. Any suggestions or corrections us would be great!

  MacBook Pro mid 2012

  -i7

  Evo - Samsung 500GB SSD

  -Ram 16

  -Latest version of Mac OS x

  -L' use of 64 GB PNY flash drive

  Your Mac 2012 supported creating a USB Installer to help BC Assistant. Do not use a DVD, a USB Flash drive. Your USB drive must be a USB2 flash drive, if you choose the USB mode and you will need a Windows ISO.

  See also create an ISO image for Windows - Apple Support installation media Boot Camp .

• make a boot disk

  I'm doing a startup disk, a boot disk.  I have several disks usb, 1, 2, 3 TB, or I could use a flash drive, if he stands on a 32 GB flash drive, that is.  I suppose that it wouldn't be as people online sell everywhere to help people who find it difficult to install el crapitan.  Many of them must be as one of the amazon sellers showed 4000 available: 39 left.  Ouch.  I can't el crapitan to install to save my life.  It crashes, never works.  The importance of the support of apple is suggesting that I say 'Yes' when I start, as I have to "accept" the agreement from apple before, even though I told her is not the problem, she sent me a book of instruction page three on how to start el crapitan and to proceed with the installation, you have to say yes, and you will need to acceptt their agreement.  Yes, I did.  no problem with this part.  but it's that the things she and the two girls before and both were subsequently in the same boat.  Mr President, let me send you instructions on how to download it.  "No, I say, I did.  Do you really think someone is struggling to push a button that says "download?  Obviously, Yes. because she sent me instructions, once again, no joke, on how to push the button so he can 'download '.  Complete with how to do it with your finger and how if you have a plug in the mouse, with a separate section if you have a wireless mouse.  Hell me silly.

  O.K. HELP!  El CRAPITAN won't complete the upgrade process.  Please tell me if it takes normally 8 to 12 hours on your systems.  I guess he was hanged and killed the process.  rebooted, retried... same thing.  anything after 12 hours or more.  Yes, I used the pad on my Apple Macbook Air 11 '', i7, 4 GB ram, 250 GB SSD.  I do not use a wireless mouse.  I have not used a wireless mouse.  I did no harm to press download, and after I did, it succeeded because it was changed to read "DOWNLOAD"... "If there are employees of apple here who have not... so much worse.  If you work for Apple, leave, just freaking leave I have no more time or patience for you.  Just trust me the O.K. FREAKING the COMPLETE DOWNLOAD.  O.K.?  Because it gives an error message when I tried to install from the same disk.  Then I tried to install it from a second disc, a key USB WD 3 TB.  Seems to hang.  (Tell me whether I should WAIT WAIT 15 HOURS OR MORE for the thing to check.)  Anyway, it does not work.  So I found a TON of entries, some are already selling thousands of them, for small usb thumb drives flash of various sizes, called the STARTUP disk, so...

  I guess el Crapitan must be installed on a PARTITION AMORCABLE where in the CAR.  Something that it would have been so freaking sweet if they would have SAID THAT SOMEWHERE some TIME no matter WHEN IN THE DESCRIPTION OF THE PACKAGE ON THEIR SITE.  OK, so I think I ned a diskette formatted in some way.  Me color cheap, stupid, whatever.  But rather than buy on online at Amazon, I thought how hard can it be?  I can do it.  Big mistake.  Create a disc a disc of starting, or bootable used to be in the old days an easy as pie thing...

  However the Apple support site, helps him terminal programs, man pages diskutil, the program Apple accessories disk utility supplies, NOT HAVING ANY HELP DRIVE of FILES THAT BOOK REFERENCE, START UP DISK or any combination of the same, you know... How can you, how can you do a... whatever.  nothing. isn't there.  And here, in the consumer help pages.  No messages that are either.

  It's not rocket science.  It can be done.  How to make a boot disk?  How to format a disk a bootable floppy.  or a book drive, no matter what.

  And if y ' All are Apple support staff, and if you tell me that I pressed the wrong download button or I pulled the single button in the wrong order... I take my mac to a shooting range and shooting it be shot to pieces and displaying it on iTunes.  And never, never, ever, buy a mac or an apple anything.  , so, this whole experience has soured me I could never do that either.

  What do you know?

  <Create a bootable OS x - Apple support Installer>

  <http://osxdaily.com/2015/09/30/create-os-x-el-capitan-boot-install-drive/>

• Satellite Pro 430 CDT - boot disk problems

  I have a toshiba satellite pro 430 cdt which I am trying to re - install windows 95 (I have win 95 on cd) on with no luck at the moment.

  I downloaded the two files from bootdisk from www.bootdisk.com, win95a and win95b, but have neither the right cd rom driver, so then I got put www.driverguide.com driver this driver on startup disk and change the config file to use the correct driver and I always get the message that no driver for cd rom drive was found.

  I don't know if the cd rom drive no longer works, even if the green light on the side flashes when you eject the disc that told me that things seem ok (maybe wrong here however). I have the cd rom plugged into the Bay on the right side of the machine (internal) and drive in the caddy it is connected on the left side of the machine (external) and even if I swap them on the cd rom drive does not work but the floppy drive works in two ways. If the connector edge on the cd rom drive doesn't work properly or the drive itself is shot.

  If I remember correctly when the boot disk works correctly it should give you 3 or 4 options (don't remember that it was a long time ago I finally did, and I did not work boot disc, DOH!), which one should be something like, "install windows with the cd rom support" or something like that.

  Once I get this I am ok I have win 95 on cd, and it is quite simple installation there from there that I built a few pc and installed different versions of windows with no true front hassels.

  Did he have the same machine as me (uk version) and able to compress all the files on a boot floppy from win 95 work and e-mail it to me?

  Or just files autoexec.bat and config.sys are all I really need (as long as they work those). Anyone know anywhere I can get my hands on one set of diskettes originally supplied with the machine that I seem to have lost mine, I think there were two or three players but no windows cd, I bought my copy (legit) from a computer fair years.

  Will provide you with my e-mail address later if necessary.

  Thanx

  Steve Jones

  Hi Steve

  I found the information that the device was shipped with 10 x player XM - 1502-B.

  Check this box:
  http://www.cdrom-drivers.com/companies/1066.htm

  There you can find a lot of drivers for different units. But maybe it's something wrong with the occupation of s PIN. In addition, you can ask the service partner for advice.

  Good bye

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• Windows start error. Root cause: no OS file found on the disk.

  My computer shows a blue screen all of a sudden, but I can't capture it. Then when it restarts, it entered the Startup Repair and it performs some tests, the other components is good but at the bottom of the diagnostic and repair details it says this:

  Root cause found:

  ---------------------------

  No OS found on the disk file.

  Repair action: Partition table repair

  Result: failed. Error code = 0 x 3

  Time taken = 6053ms

  ---------------------------

  ---------------------------

  While in the result of the diagnosis
  It shows:
  [Suspected party troubled] Hard drive
  [Error code] 2109

  Hard drive may have a hardware problem
  Please contact the Service Centre

  Can I find out if there is no possible solution to fix it and recover the data?

  Hello

  Go to the website of your computer manufacturer > search your computer specifications > know brand of hard drive > access the Hard Drive manufacturer's Web site > find and download hard drive Diagnostic software and make a record of start of it on the computer that you use to get here, following their instructions > test your hard drive to see if it has failed.

  And you can also use this method to test your hard drive:

  "SeaTools for DOS.

  http://www.Seagate.com/support/downloads/SeaTools/

  "SeaTools for BACK tutorial.

  http://knowledge.Seagate.com/articles/en_US/FAQ/201271en

  ________________________________

  And how do you try to back up your data.

  Saving your files:

  You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

  Or, you can download Knoppix > make a bootdisk to > start your system with it (IF your material is all work) > and copy your data from the hard drive like that.

  http://Knoppix.NET/

  "How to use Knoppix.

  http://Lifehacker.com/192982/geek-to-live--rescue-files-with-a-boot-CD

  See you soon.

• Windows Setup is unable to find a place to store temporary installation files. To install windows, make sure that a partition on your startup disk has at least 686 MB of free space

  Current operating system: Win XP

  New version: Win 7 Home premium downloaded from digitalriver (student version)
  The download went well and expanded on in the expandedSetup folder. When I click on the button 'Install now' on the configuration screen, it displays error
  "Windows Setup cannot find a location to store temporary installation files. To install Windows, make sure that a partition on your startup disk has at least 686 MB of free space. »
  The unusual thing only that I have in this facility, it is that I "shrunk" the volume existing XP windows C: 228 GB to 150 GB to make room for the new partition W: for windows 7.
  Here is the my drive details
  Total
  Disk 0
  Letter of free space size
  c: 150 GB GB 48.3
  W: go-go 78.0 78.1
  I: 54.7 47 MB MB (seems to be the DELL diagnostics dell partition)
  J: 4.63 GB 959 MB (seems to be the DELL partition with the original copy of OS)
  Disc 1
  free space of letter size
  M: g 78.1 29.8 GB
  N: 39.0 go-go 22.8
  X: 21.8 31.7 go-go
  Thank you
  Muthu
  I found the fix - made a bootable disc from the "expandedSetup" directory and booted from the disc. Look for the startup disk process in the solution of this tread

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/aedb1245-f8f9-42EC-9A0C-1aa932363bbb

• BOOT DISK SPACE SEEMS TO DISAPPEAR

  I m using a MacBook Air (13 inch, mid 2011) with 1.7 GHz Intel Core i5 using OS X El Captain having 4 GB 1333 MHz DDR3.

  Recently my BOOT disk ran out of space and subsequently, that I released some 22 GB of space. Then after a week of missing free space. I haven't had a major work in the meantime.

  However, I found another 20 GB of data to remove. 2 days later, this new disappeared.

  What is going on?

  Empty you your trash?