Export reports updated using the DataTransferService

Hi all

I'm trying to set up a synchronization with our Eloqua instance by exporting saved reports using the DataTransferService API.  Documentation, it is said:

Before you export data through most of export system, you will need to connect to the user of Eloqua® interface and create excerpts from standard data that you will run. You will need create a report 'saved' in Eloqua®, and then configure the report registered for export. Once that is done - the newly created export report will be shown in describing assets DataExport via the API.


I created the report saved a contact filter; How to "configure this report backed up export?  When I look at the results of DescribeAssetType ("DataExport"), I don't see my report saved listed (I guess that's because I've not implemented for export again).  What Miss me?


Thank you!

Chung

Nevermind, I figured it - go to the Admin report | Agents and using the drop-down arrow next to my name, select 'new on-demand report export.  Wow, it was hard to find! I hope this helps.

Tags: Marketers

Similar Questions

  • Windows Mail is not refreshing since 09/02/2012. When I try to update using the F5 key, I get the error messages.

    Windows Mail is not refreshing since 09/02/2012.  When I try to update using the F5 key, I get the error messages.  The only way I can see me new emails is to sign on the web page of my Internet service provider, which I don't like.

    original title: windows mail is NOT refreshing

    It would be useful that Microsoft has put a notice to have several products access our email accounts so that us non-technical people could avoid these problems.

    Maybe it's something that Apple should warn the consumer. I have three e-mail accounts and I receive and send all the accounts on three different computers at the same time and have never had this problem. Your case is the first.

  • How to submit the report BEEP using the CONCSUB utility

    Hi all

    I presented the report BEEP using the Concsub utility. But I got the xml instead of PDF output.

    I found that the page layout is not attached with this concurrent program.

    Please guide me how to add the layout with this simultaneous program when sending through CONCSUB.

    Kind regards
    Karim

    Published by: karim on November 5, 2012 13:32

    Ok

    I tried and I can't say how it works, but there work ;)

    step by step for r12
    -create a XXAND17 cp
    -create data XXAND17 definition
    -create the XXAND17 model

    [oracle@oebs out]$ CONCSUB APPS/APPS FND 'Application Developer' SYSADMIN WAIT=N CONCURRENT FND XXAND17
Submitted request 9915625 for CONCURRENT FND XXAND17

    cd $APPLCSF/$APPLOUT

    and see the o9915625.out to open it and it's xml data. then ok

    [oracle@oebs out]$ CONCSUB apps/apps FND 'Application Developer' SYSADMIN WAIT=N CONCURRENT XDO XDOREPPB Y 9915625 0 XXAND17 en N RTF RTF
Submitted request 9915626 for CONCURRENT XDO XDOREPPB Y 9915625 0 XXAND17 en N RTF RTF

    See o9915626.out open it and it isn't xml
    It looks like word doc

    {\rtf1\ansi\deff0
{\fonttbl
{\f0 Arial;}
{\f1 Times;}
{\f2 Courier New;}
{\f3 Calibri;}
}
...

    copy on the local computer and rename it to o9915626.rtf
    opened by the word and she is out as well report

    so conclusion:
    XDOREPPB works fine but not rename output way output format (rtf in my case)

    If this is a bug or a profile must be defined

    -Add

    SQL> select LOGFILE_NAME, OUTFILE_NAME from fnd_concurrent_requests r
  2  where request_id in (9915625, 9915626)
  3  /

LOGFILE_NAME                                                                     OUTFILE_NAME
-------------------------------------------------------------------------------- --------------------------------------------------------------------------------
/oracle/VIS/inst/apps/VIS_oebs/logs/appl/conc/log/l9915625.req                   /oracle/VIS/inst/apps/VIS_oebs/logs/appl/conc/out/o9915625.out
/oracle/VIS/inst/apps/VIS_oebs/logs/appl/conc/log/l9915626.req                   /oracle/VIS/inst/apps/VIS_oebs/logs/appl/conc/out/o9915626.out

SQL> select * from fnd_conc_req_outputs where concurrent_request_id  in (9915625, 9915626)
  2  /

CONCURRENT_REQUEST_ID  OUTPUT_ID FILE_TYPE                      FILE_NAME                                                                        FILE_NODE_NAME                                                                    FILE_SIZE ACTION_TYPE FILE_CREATION_DATE
--------------------- ---------- ------------------------------ -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- ---------- ----------- ------------------

SQL>

    =/

    Published by: Alexandr on 8 November 2012 06:28

  • How to upgrade the value of line in a report by using the line selector (check box)

    Hello

    I have a requirement where I need to make PLSQL update process on a specific line in my report.
    Based on the line selector (marked) the plsql process update on the values of the selected line.

    I have to update status of the employee selected as 3.
    But regardless of the choice of line selector, juice processing SRM application in a sequence that is., this is row selected, application takes the first line and updates the status.

    My update process from looks like this:

    BEGIN

    BECAUSE me in 1... apex_application.g_f01. COUNTY - checkbox
    LOOP
    If apex_application.g_f01 (i) only IS NOT NULL then - box marked
    insert into values TEMP_T (apex_application.g_f03 (i), V ('APP_USER')); -f03:Deptno
    update status set Table_x = 3 where deptno in (select deptno from TEMP_T where rtrim (lower (apex_user)) = rtrim (lower (V ('APP_USER')));
    delete from TEMP_T where rtrim (lower (apex_user)) = rtrim (lower (V ('APP_USER')));
    end if;
    END LOOP;
    END;

    Once the user selects the line selector, application needs to update the status of this particular emp 3 in Table_X.
    Currently, if I select a line, using the line selection box, my update process changes the status of the first record line. If I select three rows, then my first three rows updated.
    So I have to update the particular line or selected using the selector (checkbox) row lines

    If you could help me solve this question would be really appreciated.

    Thank you
    Vijay

    This example shows how to use checkboxes in tabular form:

    http://HTMLDB.Oracle.com/pls/OTN/f?p=31517:95

    Denes Kubicek
    ------------------------------------------------------------------------------
    http://deneskubicek.blogspot.com/
    http://www.Opal-consulting.de/training
    http://Apex.Oracle.com/pls/OTN/f?p=31517:1
    ------------------------------------------------------------------------------

  • Pages export to Word using the model of NEWSLETTER, issue 1 of page spacing

    QUESTION: Anyone know if model NEWSLETTER (and or Museum Brochure) correctly export to .docx and how delete images or change the text boxes using these models so that I am still able to export properly?

    I used the NEWSLETTER model, whose Pages can export to .docx and then import to .docx (I don't know if that Word can do, but Pages indicates it would be).

    Problem: after the header of the newsletter, I removed the photo and have floating only the areas of text underneath.  I have two pages, the 2nd page export perfect (a page break separates it from the first).  On the first page, there are 12 small boxes in two columns under the heading who generously and easily fit on the first page.  It is not unlike the model I have, however, but with no photos.  I've seen many templates use these 'boxes' in support of the columns of text on a page, I don't think the floating box would be a problem.  However, I like the wish of floating boxes to learn how to use them so that they "work".

    I saw immediately that the text boxes, I added, when export and imported .docx, lose their place and float under the heading (NEWSLETTER) (superimposed text, bad page layout).

    I noticed the paragraph (carriage return, Enter) symbols, while I moved around text boxes, had become interlaced between the boxes, but not all - 1/2 at the bottom of page.  I then noticed that attempt to remove the superfluous paragraph runs in .pages (after repositioning all the boxes), but aggravated .docx, also the Pages do not leave even to remove the first symbol (it mystifies me, because the models do not appear to use paragraph at all except inside the floating boxes).

    Finally, I added enough symbols paragraph so that there was a conflict between each text box, but not as much as Word decide to add a blank page.  I had to make sure the columns are too wide - they should be 1/4 "part we will tell.  THAT APPEARED TO WORK.  Pages exported and imported it point by point I was happy.

    But when my Advisor job achieved and open in Word (the one for Windows 7), the SAME problem, I had before setting the transport returns appeared: the two decoders or four are overlapping the title, and set the person must have inserted transport returns before the first text box to move it all down (which seemed to work - but failed as an export and no not to use practice later).  'good work '.  Fortunately, I also have attatched a PDF export, however the person had asked to change their PLU using high government dell.

    QUESTION: Anyone know if model NEWSLETTER (and or Museum Brochure) correctly export to .docx and how delete images or change the text boxes using these models so that I am still able to export properly?

    Thank you hope that your next print job loose its staples.

    Well, we have said for years in this community if you want stressless, architecture native document exchange with Windows Word users that you need to use the most recent Word available on the Mac.

    Pages is not a clone of Word, and Apple does not guarantee that the open translation process / export from/to the architecture of document Word will remain faithful to the original of the document formatted.

    In response to your questions:

    1. If you have document objects in a model with x on their border, and then the object is locked. You visit the tab Pages to reorganize v5, and downstairs you can unlock these objects for further editing, or deletion.
    2. It is advice that we can give here will make sure Pages exports specifically to the word he already did not. The logic of translation is connected to demand, and it is the price of roulette.
    3. Continue the first paragraph.

  • Get the error Code 'WindowsUpdate_8E5E03FB' 'WindowsUpdates_dt000' when you try to download recommended update using the automatic settings 'updates '.

    I just noticed today, pronouncing the 'permission' to Windows to download and install, it is recommended to update it tries to download the update, hit 11% downloaded and then shows the dialog window "update failed", asking me to "Try Again", etc. etc. I googled the error exactly as stated above, and it takes to me an article 'A' answer the Question which recommends a bunch of steps that I have not the first clue of what they mean, or what they will do. I used the option "Microsoft Fix It" after a search, in an attempt to reset the Windows Update settings, but I don't know if it's working or not, although clearly it did nothing to help in the installation of this download. By examining the log of the updates installed, I am able to receive and install other updates, however, it is with a update I see several attempts in the last days to install, and each of them ended in failure.

    When we look at the site of Question answer, other than to check to ensure the update is, indeed, the Automatic value, that it is in accordance with the instructions given that's where I get lost. The following suggestion is something to do with the "C:\windows\system32\catroot" folder, I've never even heard of, and am more than a little reluctant to go messing around with this stuff. Can any that illuminate what he done, or point me in a direction to a response that is written in 'English' for those of us without much experience of computer programming? Live is support available for all what is the cause? Any suggestions much appreciated!

    See you soon!

    Ken, "Medic95."

    See if KB970430 will install after you uninstall IOBit Security 360 & reboot. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • New installation of Windows, cannot be updated, use the troubleshooters, install some drivers, etc.

    I just got my new pc in the mail, put everything together, things are going wonderfully.

    However, my old motherboard installed my hard drive as IDE, while my new motherboard used alone RAID or AHCI (im using the same hard drive for my new pc) and so I just reinstall windows using my installation disc. And when I loaded in windows, I installed my card drivers mother perfectly fine CD. However, I can't use windows update, even after the validation of windows. All convenience stores read "a problem is preventing the troubleshooting tool to start" (0x8E50247 error code) actually ive been awarded the xxxxxx247 codes error then Yes. Help, please. I want my PC to normal

    PS I have all my old files always in my windows.old folder. Can I just set that up somehow? If my computer is back to how it was before the passage of material?

    Hello

    To troubleshoot Windows Update in Windows 7, we suggest that you follow these methods below and see if it helps.

    Method 1: Reset the Internet Explorer settings.

    You can reset the Internet Explorer settings to return to the State they were when Internet Explorer has been installed on your PC. This can be useful to solve the problems that could be caused by some settings changed after installation.

    Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Also re - activate the Add-ons.

    Please click on this link to know how to reset Internet Explorer settings.

    Method 2: Perform the clean boot

    A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts of software that occur when you install a program or an update or when your run a program in Windows.

    Click this link to learn how to perform the clean boot in Windows 7.

    Note: Please see: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

    Method 3: Run System File Checker scans to check corruption of system files.

    1. Press the Start button, then type cmd.
    2. Right click on cmd and select run as administrator.
    3. If user account control dialog box appears, confirm that the displayed action corresponds to what you want, and then click continue.
    4. Copy and paste the following command in your command-line prompt: sfc/scannow
    5. Press enter to execute the command. It may take a few minutes to complete. If you find 100% full reorganisation, click X to close the command prompt.

    Let us know the result.

  • BlackBerry Smartphones updated using the BlackBerry Desktop Manager - VERY slow!

    Hello

    Brand-new Blackberry.

    Updated the OS on my 8530 using the Desktop Manager software version 5.0.1 pc and the usb to the phone connector. I started at 11:00 this morning. It's now almost 15:00.

    It always shows 346 528 modules in the device software download part of the process. At this point, it's a failure... But he said not to disconnect your device... or other.  What now? Very disappointing.

    --

    Bill

    'Now for the future... ". I do NOT recommend the use of desktop upgrade of the Unit Manager, ever. It is simply too buggy and too many things can go wrong happen with which you have no control. »

    I tried the update site as you said but made the mistake of direct download instead of dl to pc and then to the phone as you said. Then... Well, I found the best way yet: I'll take it to the Verizon store and ask them to do every time. I'm a pretty grumpy guy, being a programmer and all except... I just haven't the patience or willingness to spend that kind of time with a phone. I mean - it's a phone. Really?

    --

    Bill

  • RequestDataSet updated using the API?

    Hello
    Is it possible to update the requestDataSet of the workflow by using the API of the IOM? An example of code will be appreciated.


    Thank you
    Olga

    No, with the current version of the OIM, you can not change request data from vol. I already have an ER for this.

    -Marie

  • Change the font color in a report by using the SQL query

    Hello

    I'm changing the font color based using a BOX the query in the form below:
    select "ORDER_ID", 
"ORDER_REFERENCE",
"ORDER_DATE",
"ORDER_SOURCE",
"TOTAL_DISCOUNT",
"DELIVERY_TYPE",
"PICKUP_DATE",
case
     when order_status = 1 then '<font color="red">'|| order_status||'</font>'
     else
     '<font color="blue">'||order_status||'</font>'
end order_staus,
"DELIVERY_STATUS",
"USER_ID",
"CUSTOMER_ID",
"SITE_ID"
from "ORDERS"
    I can get this working by selecting the Standard report column in the type of the column header . However this to say that I can't use the LOV LOV options involve removing the HTML characters.

    Is there a way I can conditionally change the font with the above query and use LOV as well? Thank you.

    Environment

    Apex 4.1.1 to apex.oracle.com
    Theme 13

    Published by: taepodong on June 3, 2012 07:28

    I'm sure that not looking the application form first before posting this question.

    Your solution would be:
    Please edit your report column under > report attributes > and select the property view as as a Standard report column

  • How can improve on the slow update using the query / * + NO_XML_DML_REWRITE * /?

    We have an update query recently brought to my attention that turns very slowly on Oracle 11.2.0.1 against a secure XML binary files table using

    Update / * + NO_XML_DML_REWRITE * / set object_value = croutreach.action: 1 where actn_id =: 2.
    I am told the majority/close to the majority of the ~ 16 fields are updated. This table has also many predefined virtual columns with index fn based on them.

    My first inclination was to this redesign using updatexml Oracle. I was told, the / * + NO_XML_DML_REWRITE * / index would also be required here.

    Update / * + NO_XML_DML_REWRITE * /.
    < tble_name > a
    Set a.object_value = updatexml (a.object_value...).

    Last year our dba have been mandated by Oracle Support to use this trick, as the update has not been updated off any msgs of error records.

    + 1. Hoping to find out if anyone met with this indication in some capacity and what has their experience been? +

    Trying to optimizie this update statement, I'll start from scratch is not using the / * + NO_XML_DML_REWRITE * / hint and will take effect in using the updatexml with establishing a xmlindex.

    + 2. Hoping to receive suggestions on creating the good xmlindex - find an informal index. If getting a few good performance with the xmlindex; in an attempt to remove some of the use of the virtual column. +

    + 3. Any suggestions on living with virtual columns in conjunction with xmlindexes? See the definition of table action and Associates ivirtual columns and indexes. This picture seems more indexed... +.
    REATE
  TABLE "CROUTREACH"."ACTION" OF XMLTYPE
  (
    CONSTRAINT "ACTN_ID_PK" PRIMARY KEY ("ACTN_ID") USING INDEX PCTFREE 10
    INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT
    1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1
    FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE
    DEFAULT) TABLESPACE "ACME_DATA" ENABLE
  )
  XMLTYPE STORE AS SECUREFILE BINARY XML
  (
    TABLESPACE "ACME_DATA" ENABLE STORAGE IN ROW CHUNK 8192 CACHE READS LOGGING
    NOCOMPRESS KEEP_DUPLICATES STORAGE(INITIAL 106496 NEXT 1048576 MINEXTENTS 1
    MAXEXTENTS 2147483645 PCTINCREASE 0 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT
    CELL_FLASH_CACHE DEFAULT)
  )
  ALLOW NONSCHEMA ALLOW ANYSCHEMA VIRTUAL COLUMNS
  (
    *"ACTION_DEF_URN"* AS (CAST(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
    'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                 
/action/srvContextPointer/outreachActionDefInfo/@actionDefUrn                                               
'
    PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
    16777216,0),50,1,2) AS VARCHAR2(50))),
    *"STAT_DT"* AS (SYS_EXTRACT_UTC(CAST(TO_TIMESTAMP_TZ(SYS_XQ_UPKXML2SQL(
    SYS_XQEXVAL(XMLQUERY(
    'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                              
/action/@status_dt'
    PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
    16777216,0),50,1,2),'SYYYY-MM-DD"T"HH24:MI:SS.FFTZH:TZM') AS TIMESTAMP
WITH
  TIME ZONE))),
    *"ACT_DEF_ID"* AS (CAST(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
    'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                              
/action/srvContextPointer/outreachActionDefInfo/@actionDefId'
    PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
    16777216,0),50,1,2) AS VARCHAR2(20))),
    *"CORRL_ID"* AS (CAST(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
    'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                              
/action/correlationId'
    PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
    16777216,0),50,1,2) AS VARCHAR2(50))),
    *"STAT_RSN"* AS (CAST(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
    'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                                  
/action/statusReason'
    PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
    16777216,0),50,1,2) AS VARCHAR2(30))),
    *"ACT_APPNT_DT"* AS (SYS_EXTRACT_UTC(CAST(TO_TIMESTAMP_TZ(SYS_XQ_UPKXML2SQL(
    SYS_XQEXVAL(XMLQUERY(
    'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                  
/action/actionAppointment/appointment_dt'
    PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
    16777216,0),50,1,2),'SYYYY-MM-DD"T"HH24:MI:SS.FFTZH:TZM') AS TIMESTAMP
WITH
  TIME ZONE))),
    *"UPDT_DT"* AS (SYS_EXTRACT_UTC(CAST(TO_TIMESTAMP_TZ(SYS_XQ_UPKXML2SQL(
    SYS_XQEXVAL(XMLQUERY(
    'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                              
/action/@update_dt'
    PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
    16777216,0),50,1,2),'SYYYY-MM-DD"T"HH24:MI:SS.FFTZH:TZM') AS TIMESTAMP
WITH
  TIME ZONE))),
    *"CRET_DT"* AS (SYS_EXTRACT_UTC(CAST(TO_TIMESTAMP_TZ(SYS_XQ_UPKXML2SQL(
    SYS_XQEXVAL(XMLQUERY(
    'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                              
/action/@create_dt'
    PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
    16777216,0),50,1,2),'SYYYY-MM-DD"T"HH24:MI:SS.FFTZH:TZM') AS TIMESTAMP
WITH
  TIME ZONE))),
    *"ACT_SEQ"* AS (CAST(TO_NUMBER(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
    'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                    
/action/srvContextPointer/outreachActionDefInfo/@sequence'
    PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
    16777216,0),50,1,2)) AS NUMBER(10))),
    *"SERVICE_DEF_URN"* AS (CAST(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
    'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03";                                                          
/action/srvContextPointer/serviceDefUrn'
    PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
    16777216,0),50,1,2) AS VARCHAR2(100))),
    *"ASSIGN_TEAM_CD"* AS (CAST(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
    'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                  
/action/assignment/@teamCategoryCode'
    PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
    16777216,0),50,1,2) AS VARCHAR2(50))),
    *"ASSIGN_STAFF_ID"* AS (CAST(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
    'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                  
/action/assignment/staffProfileId'
    PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
    16777216,0),50,1,2) AS VARCHAR2(50))),
    *"ACTION_TYPE"* AS (CAST(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
    'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03"; (::)                                                      
declare namespace xsi="http://www.w3.org/2001/XMLSchema-instance"; (::)                                                      
local-name-from-QName(QName("http://www.cigna.com/acme/domains/actions/2010/03",/action/@xsi:type))                                                                  
'
    PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
    16777216,0),50,1,2) AS VARCHAR2(50))),
    *"ACTN_ID"* AS (CAST(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
    'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03";/action/@id'
    PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
    16777216,0),50,1,2) AS VARCHAR2(50))),
    *"STATUS"*AS (CAST(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
    'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03";/action/@status'
    PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
    16777216,0),50,1,2) AS VARCHAR2(20))),
    *"ACME_MBR_ID"* AS (CAST(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(XMLQUERY(
    'declare default element namespace "http://www.cigna.com/acme/domains/actions/2010/03";/action/acmeMemberId'
    PASSING BY VALUE SYS_MAKEXML(128,"XMLDATA") RETURNING CONTENT ),0,0,
    16777216,0),50,1,2) AS VARCHAR2(50)))
  )
  PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE
  (
    INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0
    FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT
    CELL_FLASH_CACHE DEFAULT
  )
  TABLESPACE "ACME_DATA" ;
CREATE UNIQUE INDEX *"CROUTREACH"."SYS_C0014547"* ON "CROUTREACH"."ACTION"
  (
    "SYS_NC_OID$"
  )
  PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE
  (
    INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0
    FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT
    CELL_FLASH_CACHE DEFAULT
  )
  TABLESPACE "ACME_DATA" ;
CREATE UNIQUE INDEX *"CROUTREACH"."SYS_IL0000082156C00003$$"* ON "CROUTREACH".
  "ACTION"
  (
    PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 65536 NEXT 1048576
    MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST
    GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
    TABLESPACE "ACME_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ;
CREATE UNIQUE INDEX *"CROUTREACH"."ACTN_ID_PK"* ON "CROUTREACH"."ACTION" (
  "ACTN_ID") PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(
  INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0
  FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT
  CELL_FLASH_CACHE DEFAULT) TABLESPACE "ACME_DATA" ;
  CREATE
    INDEX *"CROUTREACH"."ACTION_STAT_RSN_IDX"* ON "CROUTREACH"."ACTION"
    (
      "STAT_RSN"
    )
    PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE
    (
      INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE
      0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT
      CELL_FLASH_CACHE DEFAULT
    )
    TABLESPACE "ACME_DATA" ;
  CREATE
    INDEX *"CROUTREACH"."ACTION_UPDT_DT_IDX"* ON "CROUTREACH"."ACTION"
    (
      "UPDT_DT"
    )
    PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE
    (
      INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE
      0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT
      CELL_FLASH_CACHE DEFAULT
    )
    TABLESPACE "ACME_DATA" ;
  CREATE
    INDEX *"CROUTREACH"."ACTION_CRET_DT_IDX"* ON "CROUTREACH"."ACTION"
    (
      "CRET_DT"
    )
    PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE
    (
      INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE
      0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT
      CELL_FLASH_CACHE DEFAULT
    )
    TABLESPACE "ACME_DATA" ;
  CREATE
    INDEX *"CROUTREACH"."ACTION_STAT_DT_IDX"* ON "CROUTREACH"."ACTION"
    (
      "STAT_DT"
    )
    PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE
    (
      INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE
      0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT
      CELL_FLASH_CACHE DEFAULT
    )
    TABLESPACE "ACME_DATA" ;
  CREATE
    INDEX *"CROUTREACH"."ACTION_MBRID_TYP_STAT_IDX"* ON "CROUTREACH"."ACTION"
    (
      "ACME_MBR_ID",
      "ACTION_TYPE",
      "STATUS"
    )
    PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE
    (
      INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE
      0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT
      CELL_FLASH_CACHE DEFAULT
    )
    TABLESPACE "ACME_DATA" ;
  CREATE
    INDEX *"CROUTREACH"."ACT_ACTDEF_URN_IDX"* ON "CROUTREACH"."ACTION"
    (
      "ACTION_DEF_URN"
    )
    PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE
    (
      INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE
      0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT
      CELL_FLASH_CACHE DEFAULT
    )
    TABLESPACE "ACME_DATA" ;
  CREATE
    INDEX *"CROUTREACH"."ACTION_ACT_DEF_ID_STATUS_IDX"* ON "CROUTREACH"."ACTION"
    (
      "ACT_DEF_ID",
      "STATUS"
    )
    PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE
    (
      INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE
      0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT
      CELL_FLASH_CACHE DEFAULT
    )
    TABLESPACE "ACME_DATA" ;
    Any suggestions much appreciated.

    Kind regards
    Richard Blanchard

    Hi Rick,

    Thanks for adding the sample.

    First note: you use namespaces by default, different in the example of XML and the request - this a misspelling due to your mask real names?

    In any case, I see two problems with the UPDATE statement:

    (1) unless it is really part of the id, do not double-cover the value:

    @id="'888a80be-d69f-464d-b3f7-85b6209f918e'"

    must be:

    @id="888a80be-d69f-464d-b3f7-85b6209f918e"

    or as a variable binding (see below)

    (2) just like other XML features, XMLExists supports the names. You must declare any namespace as you lower to use XQuery in the expression (in this case, the default namespace).

    It works for me:

    SQL> create table action of xmltype
  2  xmltype store as securefile binary xml
  3  ;

Table created.

SQL> insert into action
  2  values (
  3   xmltype('
  4  
 13     abcdefghijklmnop
 14     qrstuvwxyz
 15     
 16        urn:coderunner:Medical:Definition:ServiceService:11111:7
 17        
 18           Access Profile~Why did you access the profile?~Reason for access?
 19        
 20     
 21  ')
 22  );

1 row created.

SQL> commit;

Commit complete.

SQL> UPDATE action
  2  SET object_value =
  3      updatexml( object_value
  4               , '/action/@status'
  5               , 'triggered'
  6               , 'xmlns="http://www.xxxxxx.ddd/mmm/domains/actions/2010/03"' )
  7  WHERE XMLExists( 'declare default element namespace "http://www.xxxxxx.ddd/mmm/domains/actions/2010/03"; (::)
  8                   /action[@id=$action_id]'
  9                   passing object_value
 10                         , 'dfdfdfdfdfddfdfdfdfdfdf' as "action_id"
 11                   )
 12  ;

1 row updated.

SQL> SELECT XMLCast(
  2           XMLQuery('declare default element namespace "http://www.xxxxxx.ddd/mmm/domains/actions/2010/03"; (::)
  3                     /action/@status'
  4                     passing object_value returning content)
  5           as varchar2(30)
  6         ) as status
  7  FROM action
  8  ;

STATUS
------------------------------
triggered

  • Find / create / update using the Web service data command.

    Hello

    I'm working on PS2 (JDEV 11.1.1.3). One of the requirements is to build Web services from ADF pages. Initially the user connection is looking for items. The results would then be displayed as a read-only table. The user will select line clicks on the button "edit / update" then I need see the second page with the details of record selected as a form. Then he can add / edit the page. The same page is also used to 'create '. I am facing issue while the user selects the record in the table Details the research and passing the Id on the second page of the update of the. Can someone help / guide me.

    I went through the blog of Shay. http://blogs.Oracle.com/Shay/2010/05/updateinsert_with_adf_web_serv.html
    But it's different compared to my needs.

    Enjoy your entries.

    Thank you
    Mahesh

    I don't see exactly how have more fields influence the approach.
    If you are looking for a shortcut, you can try to drag the operation of fusion, as a form of parameter ADF - this will create all the fields for you. And then you will need to go in and change their value to point to the pageFlowScope object.

  • Export / made video using the GPU / MPE?

    I have the support of acceleration GPU MPE enabled in my project settings, but when I export an H.264 YouTube Widescreen HD video preset, my GPU usage is 0% and my CPU usage is 74%.

    Is there something special I have to go do encode / export using the GPU not the CPU?

    MPE has only hardware acceleration if you have taken care of the effects in your timeline. If you have no effects supported in your time line, you will not receive.

    Despite all the hype about MPE and the supported cards, guests only if the effects that you use are those supported. If you don't regularly use them, what is the sense to invest in a video card cheap if you can't use it? It's something of that every potential buyer should be aware.

    Investment in a card CUDA support is only reasonable if you use effects supported regularly.

    Benefits to export a calendar without supported effects are still unclear and maybe you knew now that without these effects, there is no discernible benefits to a supported video card. I wish I knew more about it, but we need benchmarks to tell us where and when we can enjoy such a card.

  • How can we save and export single-step using the Plugin?

    Hi all

    I want to save and export a design in Adobe illustrator to a specific folder using a plugin. For example, I created a design called test, I want to save the test.ai and shape to convert jpeg (test.jpeg) in a specific folder using a plugin instead of using normal except and export operation (file-> save, file-> export). I want to make the recording and exporting operations in a single step.

    Is it possible to do using the plugin?

    Thanks in advance

    Farida gangland.

    AIDocumentSuite allows you to save the document to a particular place, if that's what you need to do. Exporting to jpg or anything else is the 'bonus' bit depends on the signs. AIRasterize.h has some features in this sense if its what you need.

  • Export of data using the interface of the Apex

    I want to export at the same time and in a single file
    -database objects (tables, constraints, etc.)
    -possibly databases and data
    which are used by a given Apex application.

    QUESTION: Is it possible to do it through the interface of the Apex?

    I know how to do this with SQL-Developer.

    I also know how I can export through the Apex interface
    an object selected (for example, a table).
    But what of all the exporters together?

    Thank you very much
    Marios

    Hello
    Try this.

    Export all the objects schema DDL in sql single file. (tables, constraints, etc.) at the same time
    Workspace opened-> Home > utilities > Generate DDL-> createscript->-> schema name choose fron-> option selection list choose Add file save as Script-> check-all > click Generate ddl-> name of script type-> click createscript-> stored in your scripts sql inside the WORKSHOP of SQL TAB-> click on export button right under task link-> click on checkbox for the corresponding file name and click on-> to export-> export Scripts right side have your file-> click Export all.

    Combining the Application + objects ddl + data
    Open your application-> whose home > Application Builder > 123 Application > supporting objects >-> Create from scratch-> name-> editor of Setup Scripts will open-> copy and paste the sql commands that you exported using steps above

    data
    If you need to export data from sample then you can paste these commands insert into tablenamein the same sql editor in step 2 and save it

    Note: in your home > Application Builder > 123 Application > objects supporting > status-> include the object definitions to support the export of export = yes

    Export your application and the user can import using single sql file.

    Thank you
    Mark Wyatt

Maybe you are looking for

  • What the Hey?

    Why apple spent so much time training all users NEVER to click on the home button when the fingerprint detection, but now with IOS 10, it is necessary to click again when connecting. Why? Someone knows why we experienced all users now spend time wait

  • HP ENVY 17 K200nt: HP Envy 17 slow Internet connection

    Hello I recently bought computer hp envy 17 laptop. Internet connection is so slow. (About 1 Mbit/s) Other devices works perfectly, and whose speed is more than 30 Mbps. I renewed all the drivers, nothing has changed. It runs on windows 10 64-bit, Pr

  • DV7 - 6B 57 nr does not start from welcome screen

    My labtop frozen so I tried to restart but it gets stuck, after taking my password on the Welcome screen. I tried to leave, he never another mode but with the same result. I've backed up lately, so I'd rather not restore. Don't know what else to do.

  • Windows Media Player 12 is not saving the changes I'm making

    I have entered my options library and made sure to select only to add missing information so nothing is not be replaced and yet I change information on some songs and it goes right back to the way it was. Is there a way I can save my changes?

  • BlackBerry smartphones show theme?

    Ive download a theme and can see it in my application list. But how do I display on my phone?