Export request to the database error

Similar Questions

• date format in a direct request of the database

  I have a report with the direct request of the database.
  I have a quick date... I'm storing the date in a Variable named pv_date presentation.
  
  In the application of direct database, I have a where clause clause:
  
  WHERE business_date IN (@{pv_date} {' 01 / 01/2013 '})
  
  When I run the dashboard open for the first time, his throw me an error near TIMESTAMP.
  
  WHERE business_date IN (TIMESTAMP "2013-01-01 00:00:00")
  
  
  
  AND ALSO when I run this report to dashboard after you've chosen a date say 20/02/2013, I see the query in the form:
  
  WHERE business_date IN (2013-02-20 00:00:00)
  
  and that's why throwing error.
  
  
  His mistake to launch in both cases. How can I change the format in the WHERE clause.
  
  Ideally, I want the query to be WHERE business_date IN (' 20 / 02/2013 ') or Business_date IN ('' 2013-02-20)

  Since you are using Direct database application, you can use the database functions specific to your database such as to_date or to_char.
  Its as good as Toad or sql developer.

  I don't think you should use function must be evaluated as Sai said, correct me if I'm wrong.

  Published by: Srini VIEREN on 29 March 2013 09:21

• Access 2003 - repeated "You cannot make changes to the database" error

  Hey all,.

  Im having a very strange problem with Microsoft Access 2003, we work with the old databases and when we open them by Access 2003 we get the message "you cannot make changes to objects in database" error, which is expected. However, the laptop began to repeat this message repeatedly about 8 times after the first time that you click on it. Its very annoying to have to keep clicking to get rid of the error message. Its a very strange problem, any ideas on how to solve this problem, or even explain what could of happened will be appreciated.

  Thanks in advance

  PS Ce is not an option for updating the database, we work with a program that uses a database of 97 old and if you update the database the program will stop working.

  Hello

  First of all it doesn't seem that it is a Toshiba laptop failure.
  This looks more like a problem of Microsoft.
  I recommend to check the articles in the Microsoft Knowledge base or / and contact Microsoft technical support.

  I studied a bit and found these pages. Maybe you will find useful information.

  http://www.smartcomputing.com/editorial/article.asp?article=articles/WebOnly/TechSupport/420w10/20w01.asp&GUID
  http://support.Microsoft.com/kb/824260/
  http://support.Microsoft.com/?scid=kb;en-us;824278&SPID=2509&SID=98

  Good luck

• domain controller Server 2003 giving cactiveadministratoragent cannot open the database errors

  The application log on one of our domain controllers fills error every 15 minutes about:

  CActiveAdministratorAgent::DoAgentWork - failed to open the database.
  [DBNETLIB] [ConnectionOpen(connect()) (Connect()).] SQL Server is not, or access is denied.
  Error = - 2147467259.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Registration in the database error

  Hello

  I'm trying to download a new version of Term48 to the world of BB, but I get the following error when I try to record the output:

  An error occurred during the recording of output ' 0.4.0.0' to the database.

  In addition, it looks like my App icons and screenshots are missing, as all images have been replaced by a placeholder "No Image".

  Help? As far as I know, I did nothing differently from the last several times that I've updated the app. Is there something I need to do to update my profile App, or is something broken?

  Thank you!

  @Mordak Still having this problem? The images appear fine on my side.

  Please try to re-download the release.

• Cannot register in the database: error 16 038

  I have a replication process running successfully between two schemas. But when I go to reproduce a two other patterns on the same database with the same two leaders it is unable to synchronize two schemas. First of all those who are still working. Now I can't even record pieces.

  It gives this error

  "ERROR: cannot register or unregister the following EXCERPT EINTA4A due to the SQL error: OCI error 16 038.".

  What will be the reason? How can I find that where is the error?

  Hi PrazSam,

  There are many ways, some of them are below.,

  1, Create separate tablespace for Logminer. SYSAUX tablespace will be used by default. Check the below to move the SYSAUX tablespace tables to separate the tablespace.

  http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28419/d_logmnrd.htm

  2 allocate enough space for this particular file system where the tablespace.

  3. on a given time interval, bleed the SYSAUX tablespace. Please find the below document.,.

  Purge of the tablespace SYSAUX statistics | ORACLE-SNA

  Kind regards

  Veera

• I want to install CS5 from the disc Surface Pro 3, but getting the database error

  I try to install my creative suite 5 on my Tablet Surface Pro 3. I have all the disks and numbers series, but when I click on install products, I get a database error. What gives. It is not compatible with Windows 8? Y at - it an upgrade or I am just unlucky?

  Ritch257 what specific error that you receive when you try to install Creative Suite 5?

  You migrate/transfer applications or files from a previous computer?  If you need to download a new copy installation files, they are in CS5 download products.

• Cannot open the database: error, ora-03113 end of file communication

  Hi guys,.
  
  I am facing a problem with my database
  
  Oracle Linux Tikanga 5 machine
  database: 10.2.0.1
  Error: ora-03113
  
  I tried to move a log file while inserting data...
  
  I restored and tried to get back what she recovers with message media recover full but doesnot allow to open the database
  gives the same error: error: ora-03113 end of file communication
  
  Watch alert_log
  ____________
  
  ALTER database recover if necessary
  beginning
  Start of recovery Media
  ORA - 264 marked during: alter database recover if necessary
  beginning
  ...
  Fri Jan 9 16:20:18 2013
  2048 MB db_recovery_file_dest_size is 40,79% used. It is a
  user-specified limit on the amount of space that will be used by the present
  for the files related to the recovery of databases and does not reflect the amount of
  space available in the underlying file system or ASM diskgroup.
  Fri Jan 9 16:22:02 2013
  change the list of file restore of database data clear
  Fri Jan 9 16:22:02 2013
  Completed: change the clear list of restore of database data file
  Fri Jan 9 16:22:02 2013
  Edit the list of file restore of database data
  1, 2, 3, 4, 5
  Completed: change the list of file restore of database data
  1, 2, 3, 4, 5
  Fri Jan 9 16:22:02 2013
  ALTER database recover if necessary
  beginning
  Start of recovery Media
  ORA - 264 marked during: alter database recover if necessary
  beginning
  ...
  Fri Jan 9 16:22:07 2013
  change the database open
  Fri Jan 9 16:22:07 2013
  LGWR: FROM PROCESS ARCH
  Arc0 started with pid = 16, OS id = 2049
  Fri Jan 9 16:22:07 2013
  Arc0: Started archiving
  Arc1: Started archiving
  LGWR: FROM PROCESS ARCH COMPLETE
  Arc1 started with pid = 17, OS id = 2051
  Fri Jan 9 16:22:07 2013
  Fix half open fully the valve of the thread 1
  Fri Jan 9 16:22:07 2013
  Errors in the /d1/app/oracle/oradata/orcl/bdump/orcl_lgwr_1966.trc file:
  [ORA-00600: internal error code, arguments: [3712], [1], [1], [0], [445262], [0], [445261],]
  Fri Jan 9 16:22:08 2013
  Errors in the /d1/app/oracle/oradata/orcl/bdump/orcl_lgwr_1966.trc file:
  [ORA-00600: internal error code, arguments: [3712], [1], [1], [0], [445262], [0], [445261],]
  LGWR: termination litigation because of the 470 error
  Instance terminated by LGWR, pid = 1966
  
  can you please on the same...
  Thank you

  ORA-00600: internal error code, arguments: [3712].

  ORA-00600 is error internal oracle, you need to check metalink support for this.

• Export data from the database to excel file using the procedure

  Hello
  
  I need to export data from database to oracle 10 g for the excel file, I try this code:
  
  First, I create directory to the user sys and give permition to user that I'm working on it

  create or replace directory PALPROV_REPORTS as 'c:\temp';
  
  grant read, write on directory PALPROV_REPORTS to user12 ;

  then I run this code

  declare
      output utl_file.file_type;
  begin
      output := utl_file.fopen( 'user12' , 'emp1.slk', 'w',32000 );
      utl_file.put_line(output, 'line one: some text');
      utl_file.fclose( output );
  end;

  the problem appears as
  ORA-29280: invalid path ORA-06512: at "SYS." UTL_FILE", line 29 ORA-06512: at"SYS." UTL_FILE", line 448 ORA-06512: at line 4
  
  Notice that I use the operating system windows as a client and a linux as a server database

  The file will be written to the database server or your GNU / linux and I'm quite sure, there is no folder named "c:\temp" on linux. It will probably be ' / tmp' on a unix server.

  And open the file, you must give the name logic directory 'PALPROV_REPORTS' it instead of the user name "utilisateur12".

• Export data from the database Table in the CSV file with OWB mapping

  Hello
  
  is it possible to export data from a database table in a CSV with an owb mapping. I think that it should be possible, but I didn't yet. Then someone can give me some tips how to handle this? Someone has a good article on the internet or a book where such a problem is described.
  
  Thank you
  
  Greetings Daniel

  Hi Daniel,.

  But how do I set the variable data file names in the mapping?

  Look at this article on blog OWB
  http://blogs.Oracle.com/warehousebuilder/2007/07/dynamically_generating_target.html

  Kind regards
  Oleg

• Cannot create the database error

  Hello all-
  
  I worked on a project in Robohelp7/HTML for about a week. I come today and try to open my project and the error message "unable to create the database. Check that the directory is not dead. ». I did what is obvious to check the folders and files to the breast and they are not marked read only. When I create a new project, I get the same error. I'm stuck at the stop and can't understand why Robohelp has decided to deny me access to my project or the ability to create new ones. I went so far as to uninstall and reinstall, nothing helps.
  
  If someone has encountered this? Any help would be greatly appreciated.
  
  Thank you

  Something fundamentally wrong it if clown fish is to launch the same error.

  My inclination would be right for a uninstall and reinstall.

  If you have installed the patch, you can see RoboHelp 7.0.2. That uninstall and go back to add remove programs (ARP). Uninstall 7.0.1, and then go back to remove HR itself.

  When you reinstall, you need to apply the patch again.

  I have excluded firewall issues that you worked OK for a week. On the same basis, and because the clown fish up the same error, I have excluded on a network. I guess one last thing to try would be to create and reopening of a new project.

  Are you based in Iceland? There are a few pages on the Iceland under Serendipity on my site.

• Color picker error: "could not complete your request because the program error.

  IM using CC2015 on an iMac El Capitan. I get the error "Could not complete your request because of the error of the program" what colors for dropper or picking tool.

  Thanks for responding, I have the latest version on a new iMac. I am

  convinced that it is a software bug. I solved the problem by erasing all

  My predefined tools. Adobe needs to solve this problem, he has apparently been

  around since at least 2003.

  Wednesday, December 2, 2015, Akash Sharma [email protected]>

• Could not complete your request because the program error when trying to set the text on a path

  I'm putting the text on a curve and when I click with the text tool on the way I get this error message "can not complete you request because of a program error."  Photoshop CC 2014 on Win 7 with 32 GB RAM machine.  Never had this problem before!

  Hi njquinn,

  'Could not initialize Photoshop because of a program error' is a generic error and means something unexpected.

  See the PSErrorLog.txt file in your folder of Photoshop CS5 preferences (C:\Users\> \AppData\Roaming\Adobe\Adobe Photoshop 2014\Adobe Photoshop CC 2014 Settings CC). Which could give us an idea what goes wrong. In case you are not able to understand it, please copy and paste here.

  Also, allows to optimize PS for optimal performance and then check out. http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html#main_Set_P erformance_preferences ; Photoshop CC and CC 2014 GPU FAQ

  See you soon!

  ~ David

• the database error duplicate from one server to another server

  Hello
  
  I'm practicing duplicate database to a single database server to another server. Path material and pilot on 2 machines is the same. Here are my steps:
  -Clone site:
  1 change the listener.ora with content:
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain) (PORT = 1521))
  )
  )
  
  ADR_BASE_LISTENER = / u01/app/oracle
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (GLOBAL_DBNAME = orcl)
  (ORACLE_HOME = u01/app/oracle/product/11.2.0/db_1)
  (SID_NAME = orcl)
  )
  )
  ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = WE
  2. stop and start receiving once again, show message as:
  Service "orcl" has 1 instance (s).
  Instance "orcl", status UNKNOWN, has 1 operation for this service...
  
  The command completed successfully
  3. create pfile from spfile file.
  4. stop and startup nomount with pfile is new pfile create in step 3.
  --------------------------------------- Source site
  1 edit tnsnames.ora with content like:
  VVCOREDB =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = vvcoredb)
  )
  )
  
  ORCL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.254.1.235) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl)
  )
  )
  2 run the command of rman like these:
  RMAN > Connect target sys@vvcoredb
  RMAN > target password database:
  RMAN > Connect auxiliary sys@orcl
  RMAN > database auxiliary password:
  RMAN > DUPLICATE TARGET DATABASE for database orcl active spfile nofilenamecheck.
  
  Then the result show below:
  From Db double to 24-SEP-12
  using the control file of the target instead of recovery catalog database
  allocated channel: ORA_AUX_DISK_1
  channel ORA_AUX_DISK_1: SID = 63 type device = DISK
  
  content of Script memory:
  {
  backup that copy reuse
  TargetFile ' / u01/app/oracle/product/11.2.0/db_1/dbs/spfilevvcoredb.ora' auxiliary format
  ' / u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora';
  clone of SQL 'alter system set spfile = "/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora";
  }
  execution of Script memory
  
  Backup to starting 24-SEP-12
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 74 type device = DISK
  Backup finished 24-SEP-12
  
  SQL statement: alter system set spfile = "/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora"
  
  content of Script memory:
  {
  clone of SQL 'alter system set = db_name
  "ORCL" comment =
  "reproduce" scope = spfile;
  clone to stop immediately;
  startup nomount clone;
  }
  execution of Script memory
  
  SQL statement: alter system db_name set = comment "ORCL" = "duplicate" scope = spfile
  
  Instance Oracle to close
  
  connected to the auxiliary database (not started)
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Db in dual at 24/09/2012 17:44:12
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-04014: failed to start: ORA-01261: parameter db_recovery_file_dest destination string cannot be translated
  ORA-01262: Stat failed on a destination of the file directory
  Linux-x86_64 error: 2: no such file or directory
  
  I don't know what wrong with my pfile file? I said to correct my pfile site clone like this:
  ORCL.__db_cache_size = 1476395008
  ORCL.__java_pool_size = 16777216
  ORCL.__large_pool_size = 16777216
  ORCL.__oracle_base='/U01/app/oracle'#ORACLE_BASE the value of the environment
  ORCL.__pga_aggregate_target = 1342177280
  ORCL.__sga_target = 1979711488
  ORCL.__shared_io_pool_size = 0
  ORCL.__shared_pool_size = 436207616
  ORCL.__streams_pool_size = 0
  *.audit_file_dest='/U01/app/Oracle/admin/ORCL/adump '
  * .audit_trail = "db".
  * full = '11.2.0.0.0'
  *.control_files='/u01/app/oracle/oradata/orcl/control01.ctl','/u01/app/oracle/flash_recovery_area/orcl/control02.ctl'
  * .db_block_size = 8192
  * .db_domain = "
  * .db_name = "orcl".
  *.db_recovery_file_dest='/U01/app/Oracle/flash_recovery_area/vvcoredb '
  * .db_recovery_file_dest_size = 4070572032
  *.diagnostic_dest='/U01/app/Oracle '
  *. Dispatchers ='(Protocol=TCP) (SERVICE = orclXDB)"
  * .memory_target = 3313500160
  * .open_cursors = 300
  * runoff = 150
  * .remote_login_passwordfile = "EXCLUSIVE."
  * .undo_tablespace = "UNDOTBS1.
  
  Please suggest me I miss some steps when trying to duplicate database?
  
  Any suggestions are welcome.
  
  Thanks in advance!
  
  P/s: sorry for my bad English.

  This error is because the location of the controlfile specified in your spfile is not present on your server to clone. Change the location of the parameter cntrolfile in spfil or create the same location on the server.

  Published by: Slim on 24 Sep 2012 17:47

• Connect to the database error

  When I try to connect to a mysql database I get an error message that says there was a javascript error and this online 3358 in the dwscripts.js "cmdWin.setMessage" file is not a command... no idea what this could mean?

  

  Yes, I fixed the problem last night by removing a cache file. In case someone else has this problem or similar, here's what I did

  http://forums.Adobe.com/thread/494811

  Thank you!